提交 20dd6390 编写于 作者: K Koul, Vinod 提交者: Dan Williams

intel_mid_dma: change the slave interface

In 2.6.36 kernel, dma slave control command was introduced,
this patch changes the intel-mid-dma driver to this
new kernel slave interface
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
上级 8b649223
......@@ -92,13 +92,13 @@ static int get_block_ts(int len, int tx_width, int block_size)
int byte_width = 0, block_ts = 0;
switch (tx_width) {
case LNW_DMA_WIDTH_8BIT:
case DMA_SLAVE_BUSWIDTH_1_BYTE:
byte_width = 1;
break;
case LNW_DMA_WIDTH_16BIT:
case DMA_SLAVE_BUSWIDTH_2_BYTES:
byte_width = 2;
break;
case LNW_DMA_WIDTH_32BIT:
case DMA_SLAVE_BUSWIDTH_4_BYTES:
default:
byte_width = 4;
break;
......@@ -367,7 +367,7 @@ static int midc_lli_fill_sg(struct intel_mid_dma_chan *midc,
int i;
pr_debug("MDMA: Entered midc_lli_fill_sg\n");
mids = midc->chan.private;
mids = midc->mid_slave;
lli_bloc_desc = desc->lli;
lli_next = desc->lli_phys;
......@@ -398,9 +398,9 @@ static int midc_lli_fill_sg(struct intel_mid_dma_chan *midc,
sg_phy_addr = sg_phys(sg);
if (desc->dirn == DMA_TO_DEVICE) {
lli_bloc_desc->sar = sg_phy_addr;
lli_bloc_desc->dar = mids->per_addr;
lli_bloc_desc->dar = mids->dma_slave.dst_addr;
} else if (desc->dirn == DMA_FROM_DEVICE) {
lli_bloc_desc->sar = mids->per_addr;
lli_bloc_desc->sar = mids->dma_slave.src_addr;
lli_bloc_desc->dar = sg_phy_addr;
}
/*Copy values into block descriptor in system memroy*/
......@@ -507,6 +507,23 @@ static enum dma_status intel_mid_dma_tx_status(struct dma_chan *chan,
return ret;
}
static int dma_slave_control(struct dma_chan *chan, unsigned long arg)
{
struct intel_mid_dma_chan *midc = to_intel_mid_dma_chan(chan);
struct dma_slave_config *slave = (struct dma_slave_config *)arg;
struct intel_mid_dma_slave *mid_slave;
BUG_ON(!midc);
BUG_ON(!slave);
pr_debug("MDMA: slave control called\n");
mid_slave = to_intel_mid_dma_slave(slave);
BUG_ON(!mid_slave);
midc->mid_slave = mid_slave;
return 0;
}
/**
* intel_mid_dma_device_control - DMA device control
* @chan: chan for DMA control
......@@ -523,6 +540,9 @@ static int intel_mid_dma_device_control(struct dma_chan *chan,
struct intel_mid_dma_desc *desc, *_desc;
union intel_mid_dma_cfg_lo cfg_lo;
if (cmd == DMA_SLAVE_CONFIG)
return dma_slave_control(chan, arg);
if (cmd != DMA_TERMINATE_ALL)
return -ENXIO;
......@@ -540,7 +560,6 @@ static int intel_mid_dma_device_control(struct dma_chan *chan,
/* Disable interrupts */
disable_dma_interrupt(midc);
midc->descs_allocated = 0;
midc->slave = NULL;
spin_unlock_bh(&midc->lock);
list_for_each_entry_safe(desc, _desc, &midc->active_list, desc_node) {
......@@ -578,23 +597,24 @@ static struct dma_async_tx_descriptor *intel_mid_dma_prep_memcpy(
union intel_mid_dma_ctl_hi ctl_hi;
union intel_mid_dma_cfg_lo cfg_lo;
union intel_mid_dma_cfg_hi cfg_hi;
enum intel_mid_dma_width width = 0;
enum dma_slave_buswidth width;
pr_debug("MDMA: Prep for memcpy\n");
BUG_ON(!chan);
if (!len)
return NULL;
mids = chan->private;
BUG_ON(!mids);
midc = to_intel_mid_dma_chan(chan);
BUG_ON(!midc);
mids = midc->mid_slave;
BUG_ON(!mids);
pr_debug("MDMA:called for DMA %x CH %d Length %zu\n",
midc->dma->pci_id, midc->ch_id, len);
pr_debug("MDMA:Cfg passed Mode %x, Dirn %x, HS %x, Width %x\n",
mids->cfg_mode, mids->dirn, mids->hs_mode, mids->src_width);
mids->cfg_mode, mids->dma_slave.direction,
mids->hs_mode, mids->dma_slave.src_addr_width);
/*calculate CFG_LO*/
if (mids->hs_mode == LNW_DMA_SW_HS) {
......@@ -613,13 +633,13 @@ static struct dma_async_tx_descriptor *intel_mid_dma_prep_memcpy(
if (midc->dma->pimr_mask) {
cfg_hi.cfgx.protctl = 0x0; /*default value*/
cfg_hi.cfgx.fifo_mode = 1;
if (mids->dirn == DMA_TO_DEVICE) {
if (mids->dma_slave.direction == DMA_TO_DEVICE) {
cfg_hi.cfgx.src_per = 0;
if (mids->device_instance == 0)
cfg_hi.cfgx.dst_per = 3;
if (mids->device_instance == 1)
cfg_hi.cfgx.dst_per = 1;
} else if (mids->dirn == DMA_FROM_DEVICE) {
} else if (mids->dma_slave.direction == DMA_FROM_DEVICE) {
if (mids->device_instance == 0)
cfg_hi.cfgx.src_per = 2;
if (mids->device_instance == 1)
......@@ -636,7 +656,7 @@ static struct dma_async_tx_descriptor *intel_mid_dma_prep_memcpy(
/*calculate CTL_HI*/
ctl_hi.ctlx.reser = 0;
ctl_hi.ctlx.done = 0;
width = mids->src_width;
width = mids->dma_slave.src_addr_width;
ctl_hi.ctlx.block_ts = get_block_ts(len, width, midc->dma->block_size);
pr_debug("MDMA:calc len %d for block size %d\n",
......@@ -644,21 +664,21 @@ static struct dma_async_tx_descriptor *intel_mid_dma_prep_memcpy(
/*calculate CTL_LO*/
ctl_lo.ctl_lo = 0;
ctl_lo.ctlx.int_en = 1;
ctl_lo.ctlx.dst_tr_width = mids->dst_width;
ctl_lo.ctlx.src_tr_width = mids->src_width;
ctl_lo.ctlx.dst_msize = mids->src_msize;
ctl_lo.ctlx.src_msize = mids->dst_msize;
ctl_lo.ctlx.dst_tr_width = mids->dma_slave.dst_addr_width;
ctl_lo.ctlx.src_tr_width = mids->dma_slave.src_addr_width;
ctl_lo.ctlx.dst_msize = mids->dma_slave.src_maxburst;
ctl_lo.ctlx.src_msize = mids->dma_slave.dst_maxburst;
if (mids->cfg_mode == LNW_DMA_MEM_TO_MEM) {
ctl_lo.ctlx.tt_fc = 0;
ctl_lo.ctlx.sinc = 0;
ctl_lo.ctlx.dinc = 0;
} else {
if (mids->dirn == DMA_TO_DEVICE) {
if (mids->dma_slave.direction == DMA_TO_DEVICE) {
ctl_lo.ctlx.sinc = 0;
ctl_lo.ctlx.dinc = 2;
ctl_lo.ctlx.tt_fc = 1;
} else if (mids->dirn == DMA_FROM_DEVICE) {
} else if (mids->dma_slave.direction == DMA_FROM_DEVICE) {
ctl_lo.ctlx.sinc = 2;
ctl_lo.ctlx.dinc = 0;
ctl_lo.ctlx.tt_fc = 2;
......@@ -681,7 +701,7 @@ static struct dma_async_tx_descriptor *intel_mid_dma_prep_memcpy(
desc->ctl_lo = ctl_lo.ctl_lo;
desc->ctl_hi = ctl_hi.ctl_hi;
desc->width = width;
desc->dirn = mids->dirn;
desc->dirn = mids->dma_slave.direction;
desc->lli_phys = 0;
desc->lli = NULL;
desc->lli_pool = NULL;
......@@ -722,7 +742,7 @@ static struct dma_async_tx_descriptor *intel_mid_dma_prep_slave_sg(
midc = to_intel_mid_dma_chan(chan);
BUG_ON(!midc);
mids = chan->private;
mids = midc->mid_slave;
BUG_ON(!mids);
if (!midc->dma->pimr_mask) {
......
......@@ -187,13 +187,13 @@ struct intel_mid_dma_chan {
struct list_head active_list;
struct list_head queue;
struct list_head free_list;
struct intel_mid_dma_slave *slave;
unsigned int descs_allocated;
struct middma_device *dma;
bool busy;
bool in_use;
u32 raw_tfr;
u32 raw_block;
struct intel_mid_dma_slave *mid_slave;
};
static inline struct intel_mid_dma_chan *to_intel_mid_dma_chan(
......@@ -264,7 +264,7 @@ struct intel_mid_dma_desc {
dma_addr_t next;
enum dma_data_direction dirn;
enum dma_status status;
enum intel_mid_dma_width width; /*width of DMA txn*/
enum dma_slave_buswidth width; /*width of DMA txn*/
enum intel_mid_dma_mode cfg_mode; /*mode configuration*/
};
......@@ -289,6 +289,13 @@ static inline struct intel_mid_dma_desc *to_intel_mid_dma_desc
return container_of(txd, struct intel_mid_dma_desc, txd);
}
static inline struct intel_mid_dma_slave *to_intel_mid_dma_slave
(struct dma_slave_config *slave)
{
return container_of(slave, struct intel_mid_dma_slave, dma_slave);
}
int dma_resume(struct pci_dev *pci);
#endif /*__INTEL_MID_DMAC_REGS_H__*/
......@@ -28,14 +28,6 @@
#include <linux/dmaengine.h>
#define DMA_PREP_CIRCULAR_LIST (1 << 10)
/*DMA transaction width, src and dstn width would be same
The DMA length must be width aligned,
for 32 bit width the length must be 32 bit (4bytes) aligned only*/
enum intel_mid_dma_width {
LNW_DMA_WIDTH_8BIT = 0x0,
LNW_DMA_WIDTH_16BIT = 0x1,
LNW_DMA_WIDTH_32BIT = 0x2,
};
/*DMA mode configurations*/
enum intel_mid_dma_mode {
......@@ -75,15 +67,10 @@ enum intel_mid_dma_msize {
* peripheral device connected to single DMAC
*/
struct intel_mid_dma_slave {
enum dma_data_direction dirn;
enum intel_mid_dma_width src_width; /*width of DMA src txn*/
enum intel_mid_dma_width dst_width; /*width of DMA dst txn*/
enum intel_mid_dma_hs_mode hs_mode; /*handshaking*/
enum intel_mid_dma_mode cfg_mode; /*mode configuration*/
enum intel_mid_dma_msize src_msize; /*size if src burst*/
enum intel_mid_dma_msize dst_msize; /*size of dst burst*/
dma_addr_t per_addr; /*Peripheral address*/
unsigned int device_instance; /*0, 1 for periphral instance*/
struct dma_slave_config dma_slave;
};
#endif /*__INTEL_MID_DMA_H__*/
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册