提交 20d5d551 编写于 作者: K Kevin Hilman

OMAP2: PM debug: remove register dumping

Tested-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NKevin Hilman <khilman@ti.com>
上级 3a7b7bdd
......@@ -38,129 +38,10 @@
#include "prm2xxx_3xxx.h"
#include "pm.h"
int omap2_pm_debug;
u32 enable_off_mode;
u32 wakeup_timer_seconds;
u32 wakeup_timer_milliseconds;
#define DUMP_PRM_MOD_REG(mod, reg) \
regs[reg_count].name = #mod "." #reg; \
regs[reg_count++].val = omap2_prm_read_mod_reg(mod, reg)
#define DUMP_CM_MOD_REG(mod, reg) \
regs[reg_count].name = #mod "." #reg; \
regs[reg_count++].val = omap2_cm_read_mod_reg(mod, reg)
#define DUMP_PRM_REG(reg) \
regs[reg_count].name = #reg; \
regs[reg_count++].val = __raw_readl(reg)
#define DUMP_CM_REG(reg) \
regs[reg_count].name = #reg; \
regs[reg_count++].val = __raw_readl(reg)
#define DUMP_INTC_REG(reg, off) \
regs[reg_count].name = #reg; \
regs[reg_count++].val = \
__raw_readl(OMAP2_L4_IO_ADDRESS(0x480fe000 + (off)))
void omap2_pm_dump(int mode, int resume, unsigned int us)
{
struct reg {
const char *name;
u32 val;
} regs[32];
int reg_count = 0, i;
const char *s1 = NULL, *s2 = NULL;
if (!resume) {
#if 0
/* MPU */
DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRM_IRQENABLE_MPU_OFFSET);
DUMP_CM_MOD_REG(MPU_MOD, OMAP2_CM_CLKSTCTRL);
DUMP_PRM_MOD_REG(MPU_MOD, OMAP2_PM_PWSTCTRL);
DUMP_PRM_MOD_REG(MPU_MOD, OMAP2_PM_PWSTST);
DUMP_PRM_MOD_REG(MPU_MOD, PM_WKDEP);
#endif
#if 0
/* INTC */
DUMP_INTC_REG(INTC_MIR0, 0x0084);
DUMP_INTC_REG(INTC_MIR1, 0x00a4);
DUMP_INTC_REG(INTC_MIR2, 0x00c4);
#endif
#if 0
DUMP_CM_MOD_REG(CORE_MOD, CM_FCLKEN1);
if (cpu_is_omap24xx()) {
DUMP_CM_MOD_REG(CORE_MOD, OMAP24XX_CM_FCLKEN2);
DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
OMAP2_PRCM_CLKEMUL_CTRL_OFFSET);
DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
OMAP2_PRCM_CLKSRC_CTRL_OFFSET);
}
DUMP_CM_MOD_REG(WKUP_MOD, CM_FCLKEN);
DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN1);
DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN2);
DUMP_CM_MOD_REG(WKUP_MOD, CM_ICLKEN);
DUMP_CM_MOD_REG(PLL_MOD, CM_CLKEN);
DUMP_CM_MOD_REG(PLL_MOD, CM_AUTOIDLE);
DUMP_PRM_MOD_REG(CORE_MOD, OMAP2_PM_PWSTST);
#endif
#if 0
/* DSP */
if (cpu_is_omap24xx()) {
DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_FCLKEN);
DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_ICLKEN);
DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_IDLEST);
DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_AUTOIDLE);
DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSEL);
DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_CM_CLKSTCTRL);
DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_RM_RSTCTRL);
DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_RM_RSTST);
DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_PM_PWSTCTRL);
DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_PM_PWSTST);
}
#endif
} else {
DUMP_PRM_MOD_REG(CORE_MOD, PM_WKST1);
if (cpu_is_omap24xx())
DUMP_PRM_MOD_REG(CORE_MOD, OMAP24XX_PM_WKST2);
DUMP_PRM_MOD_REG(WKUP_MOD, PM_WKST);
DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
#if 1
DUMP_INTC_REG(INTC_PENDING_IRQ0, 0x0098);
DUMP_INTC_REG(INTC_PENDING_IRQ1, 0x00b8);
DUMP_INTC_REG(INTC_PENDING_IRQ2, 0x00d8);
#endif
}
switch (mode) {
case 0:
s1 = "full";
s2 = "retention";
break;
case 1:
s1 = "MPU";
s2 = "retention";
break;
case 2:
s1 = "MPU";
s2 = "idle";
break;
}
if (!resume)
#ifdef CONFIG_NO_HZ
printk(KERN_INFO
"--- Going to %s %s (next timer after %u ms)\n", s1, s2,
jiffies_to_msecs(get_next_timer_interrupt(jiffies) -
jiffies));
#else
printk(KERN_INFO "--- Going to %s %s\n", s1, s2);
#endif
else
printk(KERN_INFO "--- Woke up (slept for %u.%03u ms)\n",
us / 1000, us % 1000);
for (i = 0; i < reg_count; i++)
printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
}
void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
{
u32 tick_rate, cycles;
......
......@@ -65,14 +65,10 @@ extern u32 wakeup_timer_milliseconds;
extern struct omap_dm_timer *gptimer_wakeup;
#ifdef CONFIG_PM_DEBUG
extern void omap2_pm_dump(int mode, int resume, unsigned int us);
extern void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds);
extern int omap2_pm_debug;
extern u32 enable_off_mode;
#else
#define omap2_pm_dump(mode, resume, us) do {} while (0);
#define omap2_pm_wakeup_on_timer(seconds, milliseconds) do {} while (0);
#define omap2_pm_debug 0
#define enable_off_mode 0
#endif
......
......@@ -53,6 +53,8 @@
#include "powerdomain.h"
#include "clockdomain.h"
static int omap2_pm_debug;
#ifdef CONFIG_SUSPEND
static suspend_state_t suspend_state = PM_SUSPEND_ON;
static inline bool is_suspending(void)
......@@ -123,7 +125,6 @@ static void omap2_enter_full_retention(void)
omap2_gpio_prepare_for_idle(0);
if (omap2_pm_debug) {
omap2_pm_dump(0, 0, 0);
getnstimeofday(&ts_preidle);
}
......@@ -160,7 +161,6 @@ static void omap2_enter_full_retention(void)
getnstimeofday(&ts_postidle);
ts_idle = timespec_sub(ts_postidle, ts_preidle);
tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
omap2_pm_dump(0, 1, tmp);
}
omap2_gpio_resume_after_idle();
......@@ -247,7 +247,6 @@ static void omap2_enter_mpu_retention(void)
}
if (omap2_pm_debug) {
omap2_pm_dump(only_idle ? 2 : 1, 0, 0);
getnstimeofday(&ts_preidle);
}
......@@ -259,7 +258,6 @@ static void omap2_enter_mpu_retention(void)
getnstimeofday(&ts_postidle);
ts_idle = timespec_sub(ts_postidle, ts_preidle);
tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
omap2_pm_dump(only_idle ? 2 : 1, 1, tmp);
}
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册