“2f071f1fca3d1c5344cfcb56a55b7599d94de51f”上不存在“README.rst”
提交 1fd4a173 编写于 作者: V Vladimir Oltean 提交者: David S. Miller

net: dsa: sja1105: Update some comments about PHYLIB

Since the driver is now using PHYLINK exclusively, it makes sense to
remove all references to it and replace them with PHYLINK.
Signed-off-by: NVladimir Oltean <olteanv@gmail.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 c44d0535
......@@ -9,7 +9,7 @@ tristate "NXP SJA1105 Ethernet switch family support"
This is the driver for the NXP SJA1105 automotive Ethernet switch
family. These are 5-port devices and are managed over an SPI
interface. Probing is handled based on OF bindings and so is the
linkage to phylib. The driver supports the following revisions:
linkage to PHYLINK. The driver supports the following revisions:
- SJA1105E (Gen. 1, No TT-Ethernet)
- SJA1105T (Gen. 1, TT-Ethernet)
- SJA1105P (Gen. 2, No SGMII, No TT-Ethernet)
......
......@@ -70,8 +70,7 @@ static int sja1105_init_mac_settings(struct sja1105_private *priv)
/* Keep standard IFG of 12 bytes on egress. */
.ifg = 0,
/* Always put the MAC speed in automatic mode, where it can be
* retrieved from the PHY object through phylib and
* sja1105_adjust_port_config.
* adjusted at runtime by PHYLINK.
*/
.speed = SJA1105_SPEED_AUTO,
/* No static correction for 1-step 1588 events */
......@@ -116,7 +115,6 @@ static int sja1105_init_mac_settings(struct sja1105_private *priv)
if (!table->entries)
return -ENOMEM;
/* Override table based on phylib DT bindings */
table->entry_count = SJA1105_NUM_PORTS;
mac = table->entries;
......@@ -157,7 +155,7 @@ static int sja1105_init_mii_settings(struct sja1105_private *priv,
if (!table->entries)
return -ENOMEM;
/* Override table based on phylib DT bindings */
/* Override table based on PHYLINK DT bindings */
table->entry_count = SJA1105_MAX_XMII_PARAMS_COUNT;
mii = table->entries;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册