at91: at91-ohci: configure overcurrent pins as input GPIOs

As a new overcurrent_pin[] array has been added to the at91_usbh_data
structure, those pins must be muxed to work properly. This commit
implements this muxing for all AT91 SoCs that support the AT91 OHCI.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
[nicolas.ferre@atmel.com: added i variable declaration for the loop]
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

arch/arm/mach-at91/at91cap9_devices.c

@@ -80,6 +80,12 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
 			at91_set_gpio_output(data->vbus_pin[i], 0);
 	}
 
+	/* Enable overcurrent notification */
+	for (i = 0; i < data->ports; i++) {
+		if (data->overcurrent_pin[i])
+			at91_set_gpio_input(data->overcurrent_pin[i], 1);
+	}
+
 	usbh_data = *data;
 	platform_device_register(&at91_usbh_device);
 }

arch/arm/mach-at91/at91rm9200_devices.c

@@ -60,9 +60,17 @@ static struct platform_device at91rm9200_usbh_device = {
 
 void __init at91_add_device_usbh(struct at91_usbh_data *data)
 {
+	int i;
+
 	if (!data)
 		return;
 
+	/* Enable overcurrent notification */
+	for (i = 0; i < data->ports; i++) {
+		if (data->overcurrent_pin[i])
+			at91_set_gpio_input(data->overcurrent_pin[i], 1);
+	}
+
 	usbh_data = *data;
 	platform_device_register(&at91rm9200_usbh_device);
 }

arch/arm/mach-at91/at91sam9260_devices.c

@@ -61,9 +61,17 @@ static struct platform_device at91_usbh_device = {
 
 void __init at91_add_device_usbh(struct at91_usbh_data *data)
 {
+	int i;
+
 	if (!data)
 		return;
 
+	/* Enable overcurrent notification */
+	for (i = 0; i < data->ports; i++) {
+		if (data->overcurrent_pin[i])
+			at91_set_gpio_input(data->overcurrent_pin[i], 1);
+	}
+
 	usbh_data = *data;
 	platform_device_register(&at91_usbh_device);
 }

arch/arm/mach-at91/at91sam9261_devices.c

@@ -64,9 +64,17 @@ static struct platform_device at91sam9261_usbh_device = {
 
 void __init at91_add_device_usbh(struct at91_usbh_data *data)
 {
+	int i;
+
 	if (!data)
 		return;
 
+	/* Enable overcurrent notification */
+	for (i = 0; i < data->ports; i++) {
+		if (data->overcurrent_pin[i])
+			at91_set_gpio_input(data->overcurrent_pin[i], 1);
+	}
+
 	usbh_data = *data;
 	platform_device_register(&at91sam9261_usbh_device);
 }

arch/arm/mach-at91/at91sam9263_devices.c

@@ -74,6 +74,12 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
 			at91_set_gpio_output(data->vbus_pin[i], 0);
 	}
 
+	/* Enable overcurrent notification */
+	for (i = 0; i < data->ports; i++) {
+		if (data->overcurrent_pin[i])
+			at91_set_gpio_input(data->overcurrent_pin[i], 1);
+	}
+
 	usbh_data = *data;
 	platform_device_register(&at91_usbh_device);
 }

arch/arm/mach-at91/at91sam9g45_devices.c

@@ -124,6 +124,12 @@ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
 			at91_set_gpio_output(data->vbus_pin[i], 0);
 	}
 
+	/* Enable overcurrent notification */
+	for (i = 0; i < data->ports; i++) {
+		if (data->overcurrent_pin[i])
+			at91_set_gpio_input(data->overcurrent_pin[i], 1);
+	}
+
 	usbh_ohci_data = *data;
 	platform_device_register(&at91_usbh_ohci_device);
 }