提交 1f0555b7 编写于 作者: M Matthias Reichl 提交者: Zheng Zengkai

drm/vc4: add iec958 controls to vc4_hdmi

raspberrypi inclusion
category: feature
bugzilla: 50432

--------------------------------

Although vc4 get an IEC958 formatted stream passed in from userspace
the driver needs the info from the channel status bits to properly
set up the hardware, eg for HBR passthrough.

Add iec958 controls so the channel status bits can be passed in
from userspace.
Signed-off-by: NMatthias Reichl <hias@horus.com>
Signed-off-by: NFang Yafen <yafen@iscas.ac.cn>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
上级 fef1255e
......@@ -44,6 +44,7 @@
#include <linux/pm_runtime.h>
#include <linux/rational.h>
#include <linux/reset.h>
#include <sound/asoundef.h>
#include <sound/dmaengine_pcm.h>
#include <sound/pcm_drm_eld.h>
#include <sound/pcm_params.h>
......@@ -1170,6 +1171,47 @@ static int vc4_hdmi_audio_eld_ctl_get(struct snd_kcontrol *kcontrol,
return 0;
}
static int vc4_spdif_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
uinfo->count = 1;
return 0;
}
static int vc4_spdif_playback_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
struct vc4_hdmi *vc4_hdmi = snd_component_to_hdmi(component);
memcpy(ucontrol->value.iec958.status, vc4_hdmi->audio.iec_status,
sizeof(vc4_hdmi->audio.iec_status));
return 0;
}
static int vc4_spdif_playback_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
struct vc4_hdmi *vc4_hdmi = snd_component_to_hdmi(component);
memcpy(vc4_hdmi->audio.iec_status, ucontrol->value.iec958.status,
sizeof(vc4_hdmi->audio.iec_status));
return 0;
}
static int vc4_spdif_mask_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
memset(ucontrol->value.iec958.status, 0xff,
sizeof_field(struct vc4_hdmi_audio, iec_status));
return 0;
}
static const struct snd_kcontrol_new vc4_hdmi_audio_controls[] = {
{
.access = SNDRV_CTL_ELEM_ACCESS_READ |
......@@ -1179,6 +1221,19 @@ static const struct snd_kcontrol_new vc4_hdmi_audio_controls[] = {
.info = vc4_hdmi_audio_eld_ctl_info,
.get = vc4_hdmi_audio_eld_ctl_get,
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),
.info = vc4_spdif_info,
.get = vc4_spdif_playback_get,
.put = vc4_spdif_playback_put,
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, MASK),
.info = vc4_spdif_info,
.get = vc4_spdif_mask_get,
},
};
static const struct snd_soc_dapm_widget vc4_hdmi_audio_widgets[] = {
......@@ -1299,6 +1354,11 @@ static int vc4_hdmi_audio_init(struct vc4_hdmi *vc4_hdmi)
vc4_hdmi->audio.dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
vc4_hdmi->audio.dma_data.maxburst = 2;
vc4_hdmi->audio.iec_status[0] = IEC958_AES0_CON_NOT_COPYRIGHT;
vc4_hdmi->audio.iec_status[1] =
IEC958_AES1_CON_ORIGINAL | IEC958_AES1_CON_PCM_CODER;
vc4_hdmi->audio.iec_status[3] = IEC958_AES3_CON_FS_48000;
ret = devm_snd_dmaengine_pcm_register(dev, &pcm_conf, 0);
if (ret) {
dev_err(dev, "Could not register PCM component: %d\n", ret);
......
......@@ -116,6 +116,8 @@ struct vc4_hdmi_audio {
struct snd_pcm_substream *substream;
bool streaming;
unsigned char iec_status[4];
};
/* General HDMI hardware state. */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册