ide: separate PCI specific init from generic init in ide_pci_setup_ports()

* Setup ->mate and ->channel in ide_pci_setup_ports() instead of
  in ide_hwif_configure().

* Make 'port' parameter for ide_hwif_configure() 'unsigned int'.

* Separate PCI specific init from generic init in ide_pci_setup_ports().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
上级 bf77c531
......@@ -339,7 +339,8 @@ static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info *
* ide_hwif_configure - configure an IDE interface
* @dev: PCI device holding interface
* @d: IDE port info
* @mate: Paired interface if any
* @port: port number
* @irq: PCI IRQ
*
* Perform the initial set up for the hardware interface structure. This
* is done per interface port rather than per PCI device. There may be
......@@ -348,7 +349,9 @@ static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info *
* Returns the new hardware interface structure, or NULL on a failure
*/
static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, const struct ide_port_info *d, ide_hwif_t *mate, int port, int irq)
static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev,
const struct ide_port_info *d,
unsigned int port, int irq)
{
unsigned long ctl = 0, base = 0;
ide_hwif_t *hwif;
......@@ -394,12 +397,7 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, const struct ide_port
hwif->dev = &dev->dev;
hwif->cds = d;
hwif->channel = port;
if (mate) {
hwif->mate = mate;
mate->mate = hwif;
}
return hwif;
}
......@@ -527,10 +525,25 @@ void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, int
continue; /* port not enabled */
}
if ((hwif = ide_hwif_configure(dev, d, mate, port, pciirq)) == NULL)
hwif = ide_hwif_configure(dev, d, port, pciirq);
if (hwif == NULL)
continue;
*(idx + port) = hwif->index;
}
for (port = 0; port < channels; ++port) {
if (*(idx + port) == 0xff)
continue;
hwif = &ide_hwifs[*(idx + port)];
if (mate) {
hwif->mate = mate;
mate->mate = hwif;
}
hwif->channel = port;
if (d->init_iops)
d->init_iops(hwif);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册