Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 1e91adf7 编写于 作者: G Greg Kroah-Hartman
浏览文件
操作

Merge 3.7-rc1 usb-linus 

Sync up to a known-good point in Linus's tree to build on.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
上级 d40ce170 ddffeb8c
展开全部 隐藏空白更改
内联 并排
Showing with 11509 addition and 6823 deletion
.gitignore
浏览文件 @ 1e91adf7
......@@ -14,6 +14,10 @@
*.o.*
*.a
*.s
*.ko.unsigned
*.ko.stripped
*.ko.stripped.dig
*.ko.stripped.sig
*.ko
*.so
*.so.dbg
......@@ -84,3 +88,13 @@ GTAGS
*.orig
*~
\#*#
#
# Leavings from module signing
#
extra_certificates
signing_key.priv
signing_key.x509
signing_key.x509.keyid
signing_key.x509.signer
x509.genkey
Documentation/crypto/asymmetric-keys.txt 0 → 100644
浏览文件 @ 1e91adf7
=============================================
ASYMMETRIC / PUBLIC-KEY CRYPTOGRAPHY KEY TYPE
=============================================
Contents:
- Overview.
- Key identification.
- Accessing asymmetric keys.
- Signature verification.
- Asymmetric key subtypes.
- Instantiation data parsers.
========
OVERVIEW
========
The "asymmetric" key type is designed to be a container for the keys used in
public-key cryptography, without imposing any particular restrictions on the
form or mechanism of the cryptography or form of the key.
The asymmetric key is given a subtype that defines what sort of data is
associated with the key and provides operations to describe and destroy it.
However, no requirement is made that the key data actually be stored in the
key.
A completely in-kernel key retention and operation subtype can be defined, but
it would also be possible to provide access to cryptographic hardware (such as
a TPM) that might be used to both retain the relevant key and perform
operations using that key. In such a case, the asymmetric key would then
merely be an interface to the TPM driver.
Also provided is the concept of a data parser. Data parsers are responsible
for extracting information from the blobs of data passed to the instantiation
function. The first data parser that recognises the blob gets to set the
subtype of the key and define the operations that can be done on that key.
A data parser may interpret the data blob as containing the bits representing a
key, or it may interpret it as a reference to a key held somewhere else in the
system (for example, a TPM).
==================
KEY IDENTIFICATION
==================
If a key is added with an empty name, the instantiation data parsers are given
the opportunity to pre-parse a key and to determine the description the key
should be given from the content of the key.
This can then be used to refer to the key, either by complete match or by
partial match. The key type may also use other criteria to refer to a key.
The asymmetric key type's match function can then perform a wider range of
comparisons than just the straightforward comparison of the description with
the criterion string:
(1) If the criterion string is of the form "id:<hexdigits>" then the match
function will examine a key's fingerprint to see if the hex digits given
after the "id:" match the tail. For instance:
keyctl search @s asymmetric id:5acc2142
will match a key with fingerprint:
1A00 2040 7601 7889 DE11 882C 3823 04AD 5ACC 2142
(2) If the criterion string is of the form "<subtype>:<hexdigits>" then the
match will match the ID as in (1), but with the added restriction that
only keys of the specified subtype (e.g. tpm) will be matched. For
instance:
keyctl search @s asymmetric tpm:5acc2142
Looking in /proc/keys, the last 8 hex digits of the key fingerprint are
displayed, along with the subtype:
1a39e171 I----- 1 perm 3f010000 0 0 asymmetri modsign.0: DSA 5acc2142 []
=========================
ACCESSING ASYMMETRIC KEYS
=========================
For general access to asymmetric keys from within the kernel, the following
inclusion is required:
#include <crypto/public_key.h>
This gives access to functions for dealing with asymmetric / public keys.
Three enums are defined there for representing public-key cryptography
algorithms:
enum pkey_algo
digest algorithms used by those:
enum pkey_hash_algo
and key identifier representations:
enum pkey_id_type
Note that the key type representation types are required because key
identifiers from different standards aren't necessarily compatible. For
instance, PGP generates key identifiers by hashing the key data plus some
PGP-specific metadata, whereas X.509 has arbitrary certificate identifiers.
The operations defined upon a key are:
(1) Signature verification.
Other operations are possible (such as encryption) with the same key data
required for verification, but not currently supported, and others
(eg. decryption and signature generation) require extra key data.
SIGNATURE VERIFICATION
----------------------
An operation is provided to perform cryptographic signature verification, using
an asymmetric key to provide or to provide access to the public key.
int verify_signature(const struct key *key,
const struct public_key_signature *sig);
The caller must have already obtained the key from some source and can then use
it to check the signature. The caller must have parsed the signature and
transferred the relevant bits to the structure pointed to by sig.
struct public_key_signature {
u8 *digest;
u8 digest_size;
enum pkey_hash_algo pkey_hash_algo : 8;
u8 nr_mpi;
union {
MPI mpi[2];
...
};
};
The algorithm used must be noted in sig->pkey_hash_algo, and all the MPIs that
make up the actual signature must be stored in sig->mpi[] and the count of MPIs
placed in sig->nr_mpi.
In addition, the data must have been digested by the caller and the resulting
hash must be pointed to by sig->digest and the size of the hash be placed in
sig->digest_size.
The function will return 0 upon success or -EKEYREJECTED if the signature
doesn't match.
The function may also return -ENOTSUPP if an unsupported public-key algorithm
or public-key/hash algorithm combination is specified or the key doesn't
support the operation; -EBADMSG or -ERANGE if some of the parameters have weird
data; or -ENOMEM if an allocation can't be performed. -EINVAL can be returned
if the key argument is the wrong type or is incompletely set up.
=======================
ASYMMETRIC KEY SUBTYPES
=======================
Asymmetric keys have a subtype that defines the set of operations that can be
performed on that key and that determines what data is attached as the key
payload. The payload format is entirely at the whim of the subtype.
The subtype is selected by the key data parser and the parser must initialise
the data required for it. The asymmetric key retains a reference on the
subtype module.
The subtype definition structure can be found in:
#include <keys/asymmetric-subtype.h>
and looks like the following:
struct asymmetric_key_subtype {
struct module *owner;
const char *name;
void (*describe)(const struct key *key, struct seq_file *m);
void (*destroy)(void *payload);
int (*verify_signature)(const struct key *key,
const struct public_key_signature *sig);
};
Asymmetric keys point to this with their type_data[0] member.
The owner and name fields should be set to the owning module and the name of
the subtype. Currently, the name is only used for print statements.
There are a number of operations defined by the subtype:
(1) describe().
Mandatory. This allows the subtype to display something in /proc/keys
against the key. For instance the name of the public key algorithm type
could be displayed. The key type will display the tail of the key
identity string after this.
(2) destroy().
Mandatory. This should free the memory associated with the key. The
asymmetric key will look after freeing the fingerprint and releasing the
reference on the subtype module.
(3) verify_signature().
Optional. These are the entry points for the key usage operations.
Currently there is only the one defined. If not set, the caller will be
given -ENOTSUPP. The subtype may do anything it likes to implement an
operation, including offloading to hardware.
==========================
INSTANTIATION DATA PARSERS
==========================
The asymmetric key type doesn't generally want to store or to deal with a raw
blob of data that holds the key data. It would have to parse it and error
check it each time it wanted to use it. Further, the contents of the blob may
have various checks that can be performed on it (eg. self-signatures, validity
dates) and may contain useful data about the key (identifiers, capabilities).
Also, the blob may represent a pointer to some hardware containing the key
rather than the key itself.
Examples of blob formats for which parsers could be implemented include:
- OpenPGP packet stream [RFC 4880].
- X.509 ASN.1 stream.
- Pointer to TPM key.
- Pointer to UEFI key.
During key instantiation each parser in the list is tried until one doesn't
return -EBADMSG.
The parser definition structure can be found in:
#include <keys/asymmetric-parser.h>
and looks like the following:
struct asymmetric_key_parser {
struct module *owner;
const char *name;
int (*parse)(struct key_preparsed_payload *prep);
};
The owner and name fields should be set to the owning module and the name of
the parser.
There is currently only a single operation defined by the parser, and it is
mandatory:
(1) parse().
This is called to preparse the key from the key creation and update paths.
In particular, it is called during the key creation _before_ a key is
allocated, and as such, is permitted to provide the key's description in
the case that the caller declines to do so.
The caller passes a pointer to the following struct with all of the fields
cleared, except for data, datalen and quotalen [see
Documentation/security/keys.txt].
struct key_preparsed_payload {
char *description;
void *type_data[2];
void *payload;
const void *data;
size_t datalen;
size_t quotalen;
};
The instantiation data is in a blob pointed to by data and is datalen in
size. The parse() function is not permitted to change these two values at
all, and shouldn't change any of the other values _unless_ they are
recognise the blob format and will not return -EBADMSG to indicate it is
not theirs.
If the parser is happy with the blob, it should propose a description for
the key and attach it to ->description, ->type_data[0] should be set to
point to the subtype to be used, ->payload should be set to point to the
initialised data for that subtype, ->type_data[1] should point to a hex
fingerprint and quotalen should be updated to indicate how much quota this
key should account for.
When clearing up, the data attached to ->type_data[1] and ->description
will be kfree()'d and the data attached to ->payload will be passed to the
subtype's ->destroy() method to be disposed of. A module reference for
the subtype pointed to by ->type_data[0] will be put.
If the data format is not recognised, -EBADMSG should be returned. If it
is recognised, but the key cannot for some reason be set up, some other
negative error code should be returned. On success, 0 should be returned.
The key's fingerprint string may be partially matched upon. For a
public-key algorithm such as RSA and DSA this will likely be a printable
hex version of the key's fingerprint.
Functions are provided to register and unregister parsers:
int register_asymmetric_key_parser(struct asymmetric_key_parser *parser);
void unregister_asymmetric_key_parser(struct asymmetric_key_parser *subtype);
Parsers may not have the same name. The names are otherwise only used for
displaying in debugging messages.
Documentation/kernel-parameters.txt
浏览文件 @ 1e91adf7
......@@ -1593,6 +1593,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
log everything. Information is printed at KERN_DEBUG
so loglevel=8 may also need to be specified.
module.sig_enforce
[KNL] When CONFIG_MODULE_SIG is set, this means that
modules without (valid) signatures will fail to load.
Note that if CONFIG_MODULE_SIG_ENFORCE is set, that
is always true, so this option does nothing.
mousedev.tap_time=
[MOUSE] Maximum time between finger touching and
leaving touchpad surface for touch to be considered
......
Documentation/security/keys.txt
浏览文件 @ 1e91adf7
......@@ -412,6 +412,10 @@ The main syscalls are:
to the keyring. In this case, an error will be generated if the process
does not have permission to write to the keyring.
If the key type supports it, if the description is NULL or an empty
string, the key type will try and generate a description from the content
of the payload.
The payload is optional, and the pointer can be NULL if not required by
the type. The payload is plen in size, and plen can be zero for an empty
payload.
......@@ -1114,12 +1118,53 @@ The structure has a number of fields, some of which are mandatory:
it should return 0.
(*) int (*instantiate)(struct key *key, const void *data, size_t datalen);
(*) int (*preparse)(struct key_preparsed_payload *prep);
This optional method permits the key type to attempt to parse payload
before a key is created (add key) or the key semaphore is taken (update or
instantiate key). The structure pointed to by prep looks like:
struct key_preparsed_payload {
char *description;
void *type_data[2];
void *payload;
const void *data;
size_t datalen;
size_t quotalen;
};
Before calling the method, the caller will fill in data and datalen with
the payload blob parameters; quotalen will be filled in with the default
quota size from the key type and the rest will be cleared.
If a description can be proposed from the payload contents, that should be
attached as a string to the description field. This will be used for the
key description if the caller of add_key() passes NULL or "".
The method can attach anything it likes to type_data[] and payload. These
are merely passed along to the instantiate() or update() operations.
The method should return 0 if success ful or a negative error code
otherwise.
(*) void (*free_preparse)(struct key_preparsed_payload *prep);
This method is only required if the preparse() method is provided,
otherwise it is unused. It cleans up anything attached to the
description, type_data and payload fields of the key_preparsed_payload
struct as filled in by the preparse() method.
(*) int (*instantiate)(struct key *key, struct key_preparsed_payload *prep);
This method is called to attach a payload to a key during construction.
The payload attached need not bear any relation to the data passed to this
function.
The prep->data and prep->datalen fields will define the original payload
blob. If preparse() was supplied then other fields may be filled in also.
If the amount of data attached to the key differs from the size in
keytype->def_datalen, then key_payload_reserve() should be called.
......@@ -1135,6 +1180,9 @@ The structure has a number of fields, some of which are mandatory:
If this type of key can be updated, then this method should be provided.
It is called to update a key's payload from the blob of data provided.
The prep->data and prep->datalen fields will define the original payload
blob. If preparse() was supplied then other fields may be filled in also.
key_payload_reserve() should be called if the data length might change
before any changes are actually made. Note that if this succeeds, the type
is committed to changing the key because it's already been altered, so all
......
Makefile
浏览文件 @ 1e91adf7
VERSION = 3
PATCHLEVEL = 6
PATCHLEVEL = 7
SUBLEVEL = 0
EXTRAVERSION =
EXTRAVERSION = -rc1
NAME = Terrified Chipmunk
# *DOCUMENTATION*
......@@ -997,7 +997,10 @@ CLEAN_DIRS += $(MODVERDIR)
MRPROPER_DIRS += include/config usr/include include/generated \
arch/*/include/generated
MRPROPER_FILES += .config .config.old .version .old_version $(version_h) \
Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
signing_key.priv signing_key.x509 x509.genkey \
extra_certificates signing_key.x509.keyid \
signing_key.x509.signer
# clean - Delete most, but leave enough to build external modules
#
......@@ -1241,6 +1244,7 @@ clean: $(clean-dirs)
$(call cmd,rmfiles)
@find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
-o -name '*.ko.*' \
-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
-o -name '*.symtypes' -o -name 'modules.order' \
-o -name modules.builtin -o -name '.tmp_*.o.*' \
......
arch/Kconfig
浏览文件 @ 1e91adf7
......@@ -322,4 +322,23 @@ config HAVE_IRQ_TIME_ACCOUNTING
config HAVE_ARCH_TRANSPARENT_HUGEPAGE
bool
config HAVE_MOD_ARCH_SPECIFIC
bool
help
The arch uses struct mod_arch_specific to store data. Many arches
just need a simple module loader without arch specific data - those
should not enable this.
config MODULES_USE_ELF_RELA
bool
help
Modules only use ELF RELA relocations. Modules with ELF REL
relocations will give an error.
config MODULES_USE_ELF_REL
bool
help
Modules only use ELF REL relocations. Modules with ELF RELA
relocations will give an error.
source "kernel/gcov/Kconfig"
arch/alpha/Kconfig
浏览文件 @ 1e91adf7
......@@ -22,6 +22,8 @@ config ALPHA
select GENERIC_STRNLEN_USER
select GENERIC_KERNEL_THREAD
select GENERIC_KERNEL_EXECVE
select HAVE_MOD_ARCH_SPECIFIC
select MODULES_USE_ELF_RELA
help
The Alpha is a 64-bit general-purpose processor designed and
marketed by the Digital Equipment Corporation of blessed memory,
......
arch/alpha/include/asm/module.h
浏览文件 @ 1e91adf7
#ifndef _ALPHA_MODULE_H
#define _ALPHA_MODULE_H
#include <asm-generic/module.h>
struct mod_arch_specific
{
unsigned int gotsecindex;
};
#define Elf_Sym Elf64_Sym
#define Elf_Shdr Elf64_Shdr
#define Elf_Ehdr Elf64_Ehdr
#define Elf_Phdr Elf64_Phdr
#define Elf_Dyn Elf64_Dyn
#define Elf_Rel Elf64_Rel
#define Elf_Rela Elf64_Rela
#define ARCH_SHF_SMALL SHF_ALPHA_GPREL
#ifdef MODULE
......
arch/arm/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/arm/common/Kconfig
浏览文件 @ 1e91adf7
config ARM_GIC
bool
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
bool
config GIC_NON_BANKED
bool
config ARM_VIC
bool
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
bool
config ARM_VIC_NR
int
......
arch/arm/include/asm/Kbuild
浏览文件 @ 1e91adf7
include include/asm-generic/Kbuild.asm
header-y += hwcap.h
generic-y += auxvec.h
generic-y += bitsperlong.h
......
arch/arm/include/asm/hwcap.h
浏览文件 @ 1e91adf7
#ifndef __ASMARM_HWCAP_H
#define __ASMARM_HWCAP_H
/*
* HWCAP flags - for elf_hwcap (in kernel) and AT_HWCAP
*/
#define HWCAP_SWP (1 << 0)
#define HWCAP_HALF (1 << 1)
#define HWCAP_THUMB (1 << 2)
#define HWCAP_26BIT (1 << 3) /* Play it safe */
#define HWCAP_FAST_MULT (1 << 4)
#define HWCAP_FPA (1 << 5)
#define HWCAP_VFP (1 << 6)
#define HWCAP_EDSP (1 << 7)
#define HWCAP_JAVA (1 << 8)
#define HWCAP_IWMMXT (1 << 9)
#define HWCAP_CRUNCH (1 << 10)
#define HWCAP_THUMBEE (1 << 11)
#define HWCAP_NEON (1 << 12)
#define HWCAP_VFPv3 (1 << 13)
#define HWCAP_VFPv3D16 (1 << 14)
#define HWCAP_TLS (1 << 15)
#define HWCAP_VFPv4 (1 << 16)
#define HWCAP_IDIVA (1 << 17)
#define HWCAP_IDIVT (1 << 18)
#define HWCAP_IDIV (HWCAP_IDIVA | HWCAP_IDIVT)
#include <uapi/asm/hwcap.h>
#if defined(__KERNEL__)
#if !defined(__ASSEMBLY__)
/*
* This yields a mask that user programs can use to figure out what
......@@ -35,5 +12,3 @@
extern unsigned int elf_hwcap;
#endif
#endif
#endif
arch/arm/include/asm/module.h
浏览文件 @ 1e91adf7
#ifndef _ASM_ARM_MODULE_H
#define _ASM_ARM_MODULE_H
#define Elf_Shdr Elf32_Shdr
#define Elf_Sym Elf32_Sym
#define Elf_Ehdr Elf32_Ehdr
#include <asm-generic/module.h>
struct unwind_table;
......@@ -16,13 +14,11 @@ enum {
ARM_SEC_DEVEXIT,
ARM_SEC_MAX,
};
#endif
struct mod_arch_specific {
#ifdef CONFIG_ARM_UNWIND
struct unwind_table *unwind[ARM_SEC_MAX];
#endif
};
#endif
/*
* Add the ARM architecture version to the version magic string
......
arch/arm/include/asm/ptrace.h
浏览文件 @ 1e91adf7
......@@ -10,133 +10,12 @@
#ifndef __ASM_ARM_PTRACE_H
#define __ASM_ARM_PTRACE_H
#include <asm/hwcap.h>
#define PTRACE_GETREGS 12
#define PTRACE_SETREGS 13
#define PTRACE_GETFPREGS 14
#define PTRACE_SETFPREGS 15
/* PTRACE_ATTACH is 16 */
/* PTRACE_DETACH is 17 */
#define PTRACE_GETWMMXREGS 18
#define PTRACE_SETWMMXREGS 19
/* 20 is unused */
#define PTRACE_OLDSETOPTIONS 21
#define PTRACE_GET_THREAD_AREA 22
#define PTRACE_SET_SYSCALL 23
/* PTRACE_SYSCALL is 24 */
#define PTRACE_GETCRUNCHREGS 25
#define PTRACE_SETCRUNCHREGS 26
#define PTRACE_GETVFPREGS 27
#define PTRACE_SETVFPREGS 28
#define PTRACE_GETHBPREGS 29
#define PTRACE_SETHBPREGS 30
/*
* PSR bits
*/
#define USR26_MODE 0x00000000
#define FIQ26_MODE 0x00000001
#define IRQ26_MODE 0x00000002
#define SVC26_MODE 0x00000003
#define USR_MODE 0x00000010
#define FIQ_MODE 0x00000011
#define IRQ_MODE 0x00000012
#define SVC_MODE 0x00000013
#define ABT_MODE 0x00000017
#define HYP_MODE 0x0000001a
#define UND_MODE 0x0000001b
#define SYSTEM_MODE 0x0000001f
#define MODE32_BIT 0x00000010
#define MODE_MASK 0x0000001f
#define PSR_T_BIT 0x00000020
#define PSR_F_BIT 0x00000040
#define PSR_I_BIT 0x00000080
#define PSR_A_BIT 0x00000100
#define PSR_E_BIT 0x00000200
#define PSR_J_BIT 0x01000000
#define PSR_Q_BIT 0x08000000
#define PSR_V_BIT 0x10000000
#define PSR_C_BIT 0x20000000
#define PSR_Z_BIT 0x40000000
#define PSR_N_BIT 0x80000000
/*
* Groups of PSR bits
*/
#define PSR_f 0xff000000 /* Flags */
#define PSR_s 0x00ff0000 /* Status */
#define PSR_x 0x0000ff00 /* Extension */
#define PSR_c 0x000000ff /* Control */
/*
* ARMv7 groups of PSR bits
*/
#define APSR_MASK 0xf80f0000 /* N, Z, C, V, Q and GE flags */
#define PSR_ISET_MASK 0x01000010 /* ISA state (J, T) mask */
#define PSR_IT_MASK 0x0600fc00 /* If-Then execution state mask */
#define PSR_ENDIAN_MASK 0x00000200 /* Endianness state mask */
/*
* Default endianness state
*/
#ifdef CONFIG_CPU_ENDIAN_BE8
#define PSR_ENDSTATE PSR_E_BIT
#else
#define PSR_ENDSTATE 0
#endif
/*
* These are 'magic' values for PTRACE_PEEKUSR that return info about where a
* process is located in memory.
*/
#define PT_TEXT_ADDR 0x10000
#define PT_DATA_ADDR 0x10004
#define PT_TEXT_END_ADDR 0x10008
#include <uapi/asm/ptrace.h>
#ifndef __ASSEMBLY__
/*
* This struct defines the way the registers are stored on the
* stack during a system call. Note that sizeof(struct pt_regs)
* has to be a multiple of 8.
*/
#ifndef __KERNEL__
struct pt_regs {
long uregs[18];
};
#else /* __KERNEL__ */
struct pt_regs {
unsigned long uregs[18];
};
#endif /* __KERNEL__ */
#define ARM_cpsr uregs[16]
#define ARM_pc uregs[15]
#define ARM_lr uregs[14]
#define ARM_sp uregs[13]
#define ARM_ip uregs[12]
#define ARM_fp uregs[11]
#define ARM_r10 uregs[10]
#define ARM_r9 uregs[9]
#define ARM_r8 uregs[8]
#define ARM_r7 uregs[7]
#define ARM_r6 uregs[6]
#define ARM_r5 uregs[5]
#define ARM_r4 uregs[4]
#define ARM_r3 uregs[3]
#define ARM_r2 uregs[2]
#define ARM_r1 uregs[1]
#define ARM_r0 uregs[0]
#define ARM_ORIG_r0 uregs[17]
/*
* The size of the user-visible VFP state as seen by PTRACE_GET/SETVFPREGS
* and core dumps.
*/
#define ARM_VFPREGS_SIZE ( 32 * 8 /*fpregs*/ + 4 /*fpscr*/ )
#ifdef __KERNEL__
#define user_mode(regs) \
(((regs)->ARM_cpsr & 0xf) == 0)
......@@ -260,9 +139,5 @@ static inline unsigned long user_stack_pointer(struct pt_regs *regs)
(struct pt_regs *)((sp | (THREAD_SIZE - 1)) - 7) - 1; \
})
#endif /* __KERNEL__ */
#endif /* __ASSEMBLY__ */
#endif
arch/arm/include/asm/setup.h
浏览文件 @ 1e91adf7
......@@ -14,176 +14,8 @@
#ifndef __ASMARM_SETUP_H
#define __ASMARM_SETUP_H
#include <linux/types.h>
#include <uapi/asm/setup.h>
#define COMMAND_LINE_SIZE 1024
/* The list ends with an ATAG_NONE node. */
#define ATAG_NONE 0x00000000
struct tag_header {
__u32 size;
__u32 tag;
};
/* The list must start with an ATAG_CORE node */
#define ATAG_CORE 0x54410001
struct tag_core {
__u32 flags; /* bit 0 = read-only */
__u32 pagesize;
__u32 rootdev;
};
/* it is allowed to have multiple ATAG_MEM nodes */
#define ATAG_MEM 0x54410002
struct tag_mem32 {
__u32 size;
__u32 start; /* physical start address */
};
/* VGA text type displays */
#define ATAG_VIDEOTEXT 0x54410003
struct tag_videotext {
__u8 x;
__u8 y;
__u16 video_page;
__u8 video_mode;
__u8 video_cols;
__u16 video_ega_bx;
__u8 video_lines;
__u8 video_isvga;
__u16 video_points;
};
/* describes how the ramdisk will be used in kernel */
#define ATAG_RAMDISK 0x54410004
struct tag_ramdisk {
__u32 flags; /* bit 0 = load, bit 1 = prompt */
__u32 size; /* decompressed ramdisk size in _kilo_ bytes */
__u32 start; /* starting block of floppy-based RAM disk image */
};
/* describes where the compressed ramdisk image lives (virtual address) */
/*
* this one accidentally used virtual addresses - as such,
* it's deprecated.
*/
#define ATAG_INITRD 0x54410005
/* describes where the compressed ramdisk image lives (physical address) */
#define ATAG_INITRD2 0x54420005
struct tag_initrd {
__u32 start; /* physical start address */
__u32 size; /* size of compressed ramdisk image in bytes */
};
/* board serial number. "64 bits should be enough for everybody" */
#define ATAG_SERIAL 0x54410006
struct tag_serialnr {
__u32 low;
__u32 high;
};
/* board revision */
#define ATAG_REVISION 0x54410007
struct tag_revision {
__u32 rev;
};
/* initial values for vesafb-type framebuffers. see struct screen_info
* in include/linux/tty.h
*/
#define ATAG_VIDEOLFB 0x54410008
struct tag_videolfb {
__u16 lfb_width;
__u16 lfb_height;
__u16 lfb_depth;
__u16 lfb_linelength;
__u32 lfb_base;
__u32 lfb_size;
__u8 red_size;
__u8 red_pos;
__u8 green_size;
__u8 green_pos;
__u8 blue_size;
__u8 blue_pos;
__u8 rsvd_size;
__u8 rsvd_pos;
};
/* command line: \0 terminated string */
#define ATAG_CMDLINE 0x54410009
struct tag_cmdline {
char cmdline[1]; /* this is the minimum size */
};
/* acorn RiscPC specific information */
#define ATAG_ACORN 0x41000101
struct tag_acorn {
__u32 memc_control_reg;
__u32 vram_pages;
__u8 sounddefault;
__u8 adfsdrives;
};
/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */
#define ATAG_MEMCLK 0x41000402
struct tag_memclk {
__u32 fmemclk;
};
struct tag {
struct tag_header hdr;
union {
struct tag_core core;
struct tag_mem32 mem;
struct tag_videotext videotext;
struct tag_ramdisk ramdisk;
struct tag_initrd initrd;
struct tag_serialnr serialnr;
struct tag_revision revision;
struct tag_videolfb videolfb;
struct tag_cmdline cmdline;
/*
* Acorn specific
*/
struct tag_acorn acorn;
/*
* DC21285 specific
*/
struct tag_memclk memclk;
} u;
};
struct tagtable {
__u32 tag;
int (*parse)(const struct tag *);
};
#define tag_member_present(tag,member) \
((unsigned long)(&((struct tag *)0L)->member + 1) \
<= (tag)->hdr.size * 4)
#define tag_next(t) ((struct tag *)((__u32 *)(t) + (t)->hdr.size))
#define tag_size(type) ((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
#define for_each_tag(t,base) \
for (t = base; t->hdr.size; t = tag_next(t))
#ifdef __KERNEL__
#define __tag __used __attribute__((__section__(".taglist.init")))
#define __tagtable(tag, fn) \
......@@ -221,6 +53,4 @@ extern int arm_add_memory(phys_addr_t start, phys_addr_t size);
extern void early_print(const char *str, ...);
extern void dump_machine_table(void);
#endif /* __KERNEL__ */
#endif
arch/arm/include/asm/signal.h
浏览文件 @ 1e91adf7
#ifndef _ASMARM_SIGNAL_H
#define _ASMARM_SIGNAL_H
#include <linux/types.h>
#include <uapi/asm/signal.h>
/* Avoid too many header ordering problems. */
struct siginfo;
#ifdef __KERNEL__
/* Most things should be clean enough to redefine this at will, if care
is taken to make libc match. */
......@@ -20,100 +16,6 @@ typedef struct {
unsigned long sig[_NSIG_WORDS];
} sigset_t;
#else
/* Here we must cater to libcs that poke about in kernel headers. */
#define NSIG 32
typedef unsigned long sigset_t;
#endif /* __KERNEL__ */
#define SIGHUP 1
#define SIGINT 2
#define SIGQUIT 3
#define SIGILL 4
#define SIGTRAP 5
#define SIGABRT 6
#define SIGIOT 6
#define SIGBUS 7
#define SIGFPE 8
#define SIGKILL 9
#define SIGUSR1 10
#define SIGSEGV 11
#define SIGUSR2 12
#define SIGPIPE 13
#define SIGALRM 14
#define SIGTERM 15
#define SIGSTKFLT 16
#define SIGCHLD 17
#define SIGCONT 18
#define SIGSTOP 19
#define SIGTSTP 20
#define SIGTTIN 21
#define SIGTTOU 22
#define SIGURG 23
#define SIGXCPU 24
#define SIGXFSZ 25
#define SIGVTALRM 26
#define SIGPROF 27
#define SIGWINCH 28
#define SIGIO 29
#define SIGPOLL SIGIO
/*
#define SIGLOST 29
*/
#define SIGPWR 30
#define SIGSYS 31
#define SIGUNUSED 31
/* These should not be considered constants from userland. */
#define SIGRTMIN 32
#define SIGRTMAX _NSIG
#define SIGSWI 32
/*
* SA_FLAGS values:
*
* SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
* SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
* SA_SIGINFO deliver the signal with SIGINFO structs
* SA_THIRTYTWO delivers the signal in 32-bit mode, even if the task
* is running in 26-bit.
* SA_ONSTACK allows alternate signal stacks (see sigaltstack(2)).
* SA_RESTART flag to get restarting signals (which were the default long ago)
* SA_NODEFER prevents the current signal from being masked in the handler.
* SA_RESETHAND clears the handler when the signal is delivered.
*
* SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
* Unix names RESETHAND and NODEFER respectively.
*/
#define SA_NOCLDSTOP 0x00000001
#define SA_NOCLDWAIT 0x00000002
#define SA_SIGINFO 0x00000004
#define SA_THIRTYTWO 0x02000000
#define SA_RESTORER 0x04000000
#define SA_ONSTACK 0x08000000
#define SA_RESTART 0x10000000
#define SA_NODEFER 0x40000000
#define SA_RESETHAND 0x80000000
#define SA_NOMASK SA_NODEFER
#define SA_ONESHOT SA_RESETHAND
/*
* sigaltstack controls
*/
#define SS_ONSTACK 1
#define SS_DISABLE 2
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192
#include <asm-generic/signal-defs.h>
#ifdef __KERNEL__
struct old_sigaction {
__sighandler_t sa_handler;
old_sigset_t sa_mask;
......@@ -132,33 +34,6 @@ struct k_sigaction {
struct sigaction sa;
};
#else
/* Here we must cater to libcs that poke about in kernel headers. */
struct sigaction {
union {
__sighandler_t _sa_handler;
void (*_sa_sigaction)(int, struct siginfo *, void *);
} _u;
sigset_t sa_mask;
unsigned long sa_flags;
void (*sa_restorer)(void);
};
#define sa_handler _u._sa_handler
#define sa_sigaction _u._sa_sigaction
#endif /* __KERNEL__ */
typedef struct sigaltstack {
void __user *ss_sp;
int ss_flags;
size_t ss_size;
} stack_t;
#ifdef __KERNEL__
#include <asm/sigcontext.h>
#define ptrace_signal_deliver(regs, cookie) do { } while (0)
#endif
#endif
arch/arm/include/asm/swab.h
浏览文件 @ 1e91adf7
......@@ -15,14 +15,8 @@
#ifndef __ASM_ARM_SWAB_H
#define __ASM_ARM_SWAB_H
#include <linux/compiler.h>
#include <linux/types.h>
#include <uapi/asm/swab.h>
#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
# define __SWAB_64_THRU_32__
#endif
#if defined(__KERNEL__)
#if __LINUX_ARM_ARCH__ >= 6
static inline __attribute_const__ __u32 __arch_swahb32(__u32 x)
......@@ -42,32 +36,3 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
#endif
#endif
#if !defined(__KERNEL__) || __LINUX_ARM_ARCH__ < 6
static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
{
__u32 t;
#ifndef __thumb__
if (!__builtin_constant_p(x)) {
/*
* The compiler needs a bit of a hint here to always do the
* right thing and not screw it up to different degrees
* depending on the gcc version.
*/
asm ("eor\t%0, %1, %1, ror #16" : "=r" (t) : "r" (x));
} else
#endif
t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */
x = (x << 24) | (x >> 8); /* mov r0,r0,ror #8 */
t &= ~0x00FF0000; /* bic r1,r1,#0x00FF0000 */
x ^= (t >> 8); /* eor r0,r0,r1,lsr #8 */
return x;
}
#define __arch_swab32 __arch_swab32
#endif
#endif
arch/arm/include/asm/unistd.h
浏览文件 @ 1e91adf7
......@@ -13,447 +13,10 @@
#ifndef __ASM_ARM_UNISTD_H
#define __ASM_ARM_UNISTD_H
#define __NR_OABI_SYSCALL_BASE 0x900000
#include <uapi/asm/unistd.h>
#if defined(__thumb__) || defined(__ARM_EABI__)
#define __NR_SYSCALL_BASE 0
#else
#define __NR_SYSCALL_BASE __NR_OABI_SYSCALL_BASE
#endif
/*
* This file contains the system call numbers.
*/
#define __NR_restart_syscall (__NR_SYSCALL_BASE+ 0)
#define __NR_exit (__NR_SYSCALL_BASE+ 1)
#define __NR_fork (__NR_SYSCALL_BASE+ 2)
#define __NR_read (__NR_SYSCALL_BASE+ 3)
#define __NR_write (__NR_SYSCALL_BASE+ 4)
#define __NR_open (__NR_SYSCALL_BASE+ 5)
#define __NR_close (__NR_SYSCALL_BASE+ 6)
/* 7 was sys_waitpid */
#define __NR_creat (__NR_SYSCALL_BASE+ 8)
#define __NR_link (__NR_SYSCALL_BASE+ 9)
#define __NR_unlink (__NR_SYSCALL_BASE+ 10)
#define __NR_execve (__NR_SYSCALL_BASE+ 11)
#define __NR_chdir (__NR_SYSCALL_BASE+ 12)
#define __NR_time (__NR_SYSCALL_BASE+ 13)
#define __NR_mknod (__NR_SYSCALL_BASE+ 14)
#define __NR_chmod (__NR_SYSCALL_BASE+ 15)
#define __NR_lchown (__NR_SYSCALL_BASE+ 16)
/* 17 was sys_break */
/* 18 was sys_stat */
#define __NR_lseek (__NR_SYSCALL_BASE+ 19)
#define __NR_getpid (__NR_SYSCALL_BASE+ 20)
#define __NR_mount (__NR_SYSCALL_BASE+ 21)
#define __NR_umount (__NR_SYSCALL_BASE+ 22)
#define __NR_setuid (__NR_SYSCALL_BASE+ 23)
#define __NR_getuid (__NR_SYSCALL_BASE+ 24)
#define __NR_stime (__NR_SYSCALL_BASE+ 25)
#define __NR_ptrace (__NR_SYSCALL_BASE+ 26)
#define __NR_alarm (__NR_SYSCALL_BASE+ 27)
/* 28 was sys_fstat */
#define __NR_pause (__NR_SYSCALL_BASE+ 29)
#define __NR_utime (__NR_SYSCALL_BASE+ 30)
/* 31 was sys_stty */
/* 32 was sys_gtty */
#define __NR_access (__NR_SYSCALL_BASE+ 33)
#define __NR_nice (__NR_SYSCALL_BASE+ 34)
/* 35 was sys_ftime */
#define __NR_sync (__NR_SYSCALL_BASE+ 36)
#define __NR_kill (__NR_SYSCALL_BASE+ 37)
#define __NR_rename (__NR_SYSCALL_BASE+ 38)
#define __NR_mkdir (__NR_SYSCALL_BASE+ 39)
#define __NR_rmdir (__NR_SYSCALL_BASE+ 40)
#define __NR_dup (__NR_SYSCALL_BASE+ 41)
#define __NR_pipe (__NR_SYSCALL_BASE+ 42)
#define __NR_times (__NR_SYSCALL_BASE+ 43)
/* 44 was sys_prof */
#define __NR_brk (__NR_SYSCALL_BASE+ 45)
#define __NR_setgid (__NR_SYSCALL_BASE+ 46)
#define __NR_getgid (__NR_SYSCALL_BASE+ 47)
/* 48 was sys_signal */
#define __NR_geteuid (__NR_SYSCALL_BASE+ 49)
#define __NR_getegid (__NR_SYSCALL_BASE+ 50)
#define __NR_acct (__NR_SYSCALL_BASE+ 51)
#define __NR_umount2 (__NR_SYSCALL_BASE+ 52)
/* 53 was sys_lock */
#define __NR_ioctl (__NR_SYSCALL_BASE+ 54)
#define __NR_fcntl (__NR_SYSCALL_BASE+ 55)
/* 56 was sys_mpx */
#define __NR_setpgid (__NR_SYSCALL_BASE+ 57)
/* 58 was sys_ulimit */
/* 59 was sys_olduname */
#define __NR_umask (__NR_SYSCALL_BASE+ 60)
#define __NR_chroot (__NR_SYSCALL_BASE+ 61)
#define __NR_ustat (__NR_SYSCALL_BASE+ 62)
#define __NR_dup2 (__NR_SYSCALL_BASE+ 63)
#define __NR_getppid (__NR_SYSCALL_BASE+ 64)
#define __NR_getpgrp (__NR_SYSCALL_BASE+ 65)
#define __NR_setsid (__NR_SYSCALL_BASE+ 66)
#define __NR_sigaction (__NR_SYSCALL_BASE+ 67)
/* 68 was sys_sgetmask */
/* 69 was sys_ssetmask */
#define __NR_setreuid (__NR_SYSCALL_BASE+ 70)
#define __NR_setregid (__NR_SYSCALL_BASE+ 71)
#define __NR_sigsuspend (__NR_SYSCALL_BASE+ 72)
#define __NR_sigpending (__NR_SYSCALL_BASE+ 73)
#define __NR_sethostname (__NR_SYSCALL_BASE+ 74)
#define __NR_setrlimit (__NR_SYSCALL_BASE+ 75)
#define __NR_getrlimit (__NR_SYSCALL_BASE+ 76) /* Back compat 2GB limited rlimit */
#define __NR_getrusage (__NR_SYSCALL_BASE+ 77)
#define __NR_gettimeofday (__NR_SYSCALL_BASE+ 78)
#define __NR_settimeofday (__NR_SYSCALL_BASE+ 79)
#define __NR_getgroups (__NR_SYSCALL_BASE+ 80)
#define __NR_setgroups (__NR_SYSCALL_BASE+ 81)
#define __NR_select (__NR_SYSCALL_BASE+ 82)
#define __NR_symlink (__NR_SYSCALL_BASE+ 83)
/* 84 was sys_lstat */
#define __NR_readlink (__NR_SYSCALL_BASE+ 85)
#define __NR_uselib (__NR_SYSCALL_BASE+ 86)
#define __NR_swapon (__NR_SYSCALL_BASE+ 87)
#define __NR_reboot (__NR_SYSCALL_BASE+ 88)
#define __NR_readdir (__NR_SYSCALL_BASE+ 89)
#define __NR_mmap (__NR_SYSCALL_BASE+ 90)
#define __NR_munmap (__NR_SYSCALL_BASE+ 91)
#define __NR_truncate (__NR_SYSCALL_BASE+ 92)
#define __NR_ftruncate (__NR_SYSCALL_BASE+ 93)
#define __NR_fchmod (__NR_SYSCALL_BASE+ 94)
#define __NR_fchown (__NR_SYSCALL_BASE+ 95)
#define __NR_getpriority (__NR_SYSCALL_BASE+ 96)
#define __NR_setpriority (__NR_SYSCALL_BASE+ 97)
/* 98 was sys_profil */
#define __NR_statfs (__NR_SYSCALL_BASE+ 99)
#define __NR_fstatfs (__NR_SYSCALL_BASE+100)
/* 101 was sys_ioperm */
#define __NR_socketcall (__NR_SYSCALL_BASE+102)
#define __NR_syslog (__NR_SYSCALL_BASE+103)
#define __NR_setitimer (__NR_SYSCALL_BASE+104)
#define __NR_getitimer (__NR_SYSCALL_BASE+105)
#define __NR_stat (__NR_SYSCALL_BASE+106)
#define __NR_lstat (__NR_SYSCALL_BASE+107)
#define __NR_fstat (__NR_SYSCALL_BASE+108)
/* 109 was sys_uname */
/* 110 was sys_iopl */
#define __NR_vhangup (__NR_SYSCALL_BASE+111)
/* 112 was sys_idle */
#define __NR_syscall (__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */
#define __NR_wait4 (__NR_SYSCALL_BASE+114)
#define __NR_swapoff (__NR_SYSCALL_BASE+115)
#define __NR_sysinfo (__NR_SYSCALL_BASE+116)
#define __NR_ipc (__NR_SYSCALL_BASE+117)
#define __NR_fsync (__NR_SYSCALL_BASE+118)
#define __NR_sigreturn (__NR_SYSCALL_BASE+119)
#define __NR_clone (__NR_SYSCALL_BASE+120)
#define __NR_setdomainname (__NR_SYSCALL_BASE+121)
#define __NR_uname (__NR_SYSCALL_BASE+122)
/* 123 was sys_modify_ldt */
#define __NR_adjtimex (__NR_SYSCALL_BASE+124)
#define __NR_mprotect (__NR_SYSCALL_BASE+125)
#define __NR_sigprocmask (__NR_SYSCALL_BASE+126)
/* 127 was sys_create_module */
#define __NR_init_module (__NR_SYSCALL_BASE+128)
#define __NR_delete_module (__NR_SYSCALL_BASE+129)
/* 130 was sys_get_kernel_syms */
#define __NR_quotactl (__NR_SYSCALL_BASE+131)
#define __NR_getpgid (__NR_SYSCALL_BASE+132)
#define __NR_fchdir (__NR_SYSCALL_BASE+133)
#define __NR_bdflush (__NR_SYSCALL_BASE+134)
#define __NR_sysfs (__NR_SYSCALL_BASE+135)
#define __NR_personality (__NR_SYSCALL_BASE+136)
/* 137 was sys_afs_syscall */
#define __NR_setfsuid (__NR_SYSCALL_BASE+138)
#define __NR_setfsgid (__NR_SYSCALL_BASE+139)
#define __NR__llseek (__NR_SYSCALL_BASE+140)
#define __NR_getdents (__NR_SYSCALL_BASE+141)
#define __NR__newselect (__NR_SYSCALL_BASE+142)
#define __NR_flock (__NR_SYSCALL_BASE+143)
#define __NR_msync (__NR_SYSCALL_BASE+144)
#define __NR_readv (__NR_SYSCALL_BASE+145)
#define __NR_writev (__NR_SYSCALL_BASE+146)
#define __NR_getsid (__NR_SYSCALL_BASE+147)
#define __NR_fdatasync (__NR_SYSCALL_BASE+148)
#define __NR__sysctl (__NR_SYSCALL_BASE+149)
#define __NR_mlock (__NR_SYSCALL_BASE+150)
#define __NR_munlock (__NR_SYSCALL_BASE+151)
#define __NR_mlockall (__NR_SYSCALL_BASE+152)
#define __NR_munlockall (__NR_SYSCALL_BASE+153)
#define __NR_sched_setparam (__NR_SYSCALL_BASE+154)
#define __NR_sched_getparam (__NR_SYSCALL_BASE+155)
#define __NR_sched_setscheduler (__NR_SYSCALL_BASE+156)
#define __NR_sched_getscheduler (__NR_SYSCALL_BASE+157)
#define __NR_sched_yield (__NR_SYSCALL_BASE+158)
#define __NR_sched_get_priority_max (__NR_SYSCALL_BASE+159)
#define __NR_sched_get_priority_min (__NR_SYSCALL_BASE+160)
#define __NR_sched_rr_get_interval (__NR_SYSCALL_BASE+161)
#define __NR_nanosleep (__NR_SYSCALL_BASE+162)
#define __NR_mremap (__NR_SYSCALL_BASE+163)
#define __NR_setresuid (__NR_SYSCALL_BASE+164)
#define __NR_getresuid (__NR_SYSCALL_BASE+165)
/* 166 was sys_vm86 */
/* 167 was sys_query_module */
#define __NR_poll (__NR_SYSCALL_BASE+168)
#define __NR_nfsservctl (__NR_SYSCALL_BASE+169)
#define __NR_setresgid (__NR_SYSCALL_BASE+170)
#define __NR_getresgid (__NR_SYSCALL_BASE+171)
#define __NR_prctl (__NR_SYSCALL_BASE+172)
#define __NR_rt_sigreturn (__NR_SYSCALL_BASE+173)
#define __NR_rt_sigaction (__NR_SYSCALL_BASE+174)
#define __NR_rt_sigprocmask (__NR_SYSCALL_BASE+175)
#define __NR_rt_sigpending (__NR_SYSCALL_BASE+176)
#define __NR_rt_sigtimedwait (__NR_SYSCALL_BASE+177)
#define __NR_rt_sigqueueinfo (__NR_SYSCALL_BASE+178)
#define __NR_rt_sigsuspend (__NR_SYSCALL_BASE+179)
#define __NR_pread64 (__NR_SYSCALL_BASE+180)
#define __NR_pwrite64 (__NR_SYSCALL_BASE+181)
#define __NR_chown (__NR_SYSCALL_BASE+182)
#define __NR_getcwd (__NR_SYSCALL_BASE+183)
#define __NR_capget (__NR_SYSCALL_BASE+184)
#define __NR_capset (__NR_SYSCALL_BASE+185)
#define __NR_sigaltstack (__NR_SYSCALL_BASE+186)
#define __NR_sendfile (__NR_SYSCALL_BASE+187)
/* 188 reserved */
/* 189 reserved */
#define __NR_vfork (__NR_SYSCALL_BASE+190)
#define __NR_ugetrlimit (__NR_SYSCALL_BASE+191) /* SuS compliant getrlimit */
#define __NR_mmap2 (__NR_SYSCALL_BASE+192)
#define __NR_truncate64 (__NR_SYSCALL_BASE+193)
#define __NR_ftruncate64 (__NR_SYSCALL_BASE+194)
#define __NR_stat64 (__NR_SYSCALL_BASE+195)
#define __NR_lstat64 (__NR_SYSCALL_BASE+196)
#define __NR_fstat64 (__NR_SYSCALL_BASE+197)
#define __NR_lchown32 (__NR_SYSCALL_BASE+198)
#define __NR_getuid32 (__NR_SYSCALL_BASE+199)
#define __NR_getgid32 (__NR_SYSCALL_BASE+200)
#define __NR_geteuid32 (__NR_SYSCALL_BASE+201)
#define __NR_getegid32 (__NR_SYSCALL_BASE+202)
#define __NR_setreuid32 (__NR_SYSCALL_BASE+203)
#define __NR_setregid32 (__NR_SYSCALL_BASE+204)
#define __NR_getgroups32 (__NR_SYSCALL_BASE+205)
#define __NR_setgroups32 (__NR_SYSCALL_BASE+206)
#define __NR_fchown32 (__NR_SYSCALL_BASE+207)
#define __NR_setresuid32 (__NR_SYSCALL_BASE+208)
#define __NR_getresuid32 (__NR_SYSCALL_BASE+209)
#define __NR_setresgid32 (__NR_SYSCALL_BASE+210)
#define __NR_getresgid32 (__NR_SYSCALL_BASE+211)
#define __NR_chown32 (__NR_SYSCALL_BASE+212)
#define __NR_setuid32 (__NR_SYSCALL_BASE+213)
#define __NR_setgid32 (__NR_SYSCALL_BASE+214)
#define __NR_setfsuid32 (__NR_SYSCALL_BASE+215)
#define __NR_setfsgid32 (__NR_SYSCALL_BASE+216)
#define __NR_getdents64 (__NR_SYSCALL_BASE+217)
#define __NR_pivot_root (__NR_SYSCALL_BASE+218)
#define __NR_mincore (__NR_SYSCALL_BASE+219)
#define __NR_madvise (__NR_SYSCALL_BASE+220)
#define __NR_fcntl64 (__NR_SYSCALL_BASE+221)
/* 222 for tux */
/* 223 is unused */
#define __NR_gettid (__NR_SYSCALL_BASE+224)
#define __NR_readahead (__NR_SYSCALL_BASE+225)
#define __NR_setxattr (__NR_SYSCALL_BASE+226)
#define __NR_lsetxattr (__NR_SYSCALL_BASE+227)
#define __NR_fsetxattr (__NR_SYSCALL_BASE+228)
#define __NR_getxattr (__NR_SYSCALL_BASE+229)
#define __NR_lgetxattr (__NR_SYSCALL_BASE+230)
#define __NR_fgetxattr (__NR_SYSCALL_BASE+231)
#define __NR_listxattr (__NR_SYSCALL_BASE+232)
#define __NR_llistxattr (__NR_SYSCALL_BASE+233)
#define __NR_flistxattr (__NR_SYSCALL_BASE+234)
#define __NR_removexattr (__NR_SYSCALL_BASE+235)
#define __NR_lremovexattr (__NR_SYSCALL_BASE+236)
#define __NR_fremovexattr (__NR_SYSCALL_BASE+237)
#define __NR_tkill (__NR_SYSCALL_BASE+238)
#define __NR_sendfile64 (__NR_SYSCALL_BASE+239)
#define __NR_futex (__NR_SYSCALL_BASE+240)
#define __NR_sched_setaffinity (__NR_SYSCALL_BASE+241)
#define __NR_sched_getaffinity (__NR_SYSCALL_BASE+242)
#define __NR_io_setup (__NR_SYSCALL_BASE+243)
#define __NR_io_destroy (__NR_SYSCALL_BASE+244)
#define __NR_io_getevents (__NR_SYSCALL_BASE+245)
#define __NR_io_submit (__NR_SYSCALL_BASE+246)
#define __NR_io_cancel (__NR_SYSCALL_BASE+247)
#define __NR_exit_group (__NR_SYSCALL_BASE+248)
#define __NR_lookup_dcookie (__NR_SYSCALL_BASE+249)
#define __NR_epoll_create (__NR_SYSCALL_BASE+250)
#define __NR_epoll_ctl (__NR_SYSCALL_BASE+251)
#define __NR_epoll_wait (__NR_SYSCALL_BASE+252)
#define __NR_remap_file_pages (__NR_SYSCALL_BASE+253)
/* 254 for set_thread_area */
/* 255 for get_thread_area */
#define __NR_set_tid_address (__NR_SYSCALL_BASE+256)
#define __NR_timer_create (__NR_SYSCALL_BASE+257)
#define __NR_timer_settime (__NR_SYSCALL_BASE+258)
#define __NR_timer_gettime (__NR_SYSCALL_BASE+259)
#define __NR_timer_getoverrun (__NR_SYSCALL_BASE+260)
#define __NR_timer_delete (__NR_SYSCALL_BASE+261)
#define __NR_clock_settime (__NR_SYSCALL_BASE+262)
#define __NR_clock_gettime (__NR_SYSCALL_BASE+263)
#define __NR_clock_getres (__NR_SYSCALL_BASE+264)
#define __NR_clock_nanosleep (__NR_SYSCALL_BASE+265)
#define __NR_statfs64 (__NR_SYSCALL_BASE+266)
#define __NR_fstatfs64 (__NR_SYSCALL_BASE+267)
#define __NR_tgkill (__NR_SYSCALL_BASE+268)
#define __NR_utimes (__NR_SYSCALL_BASE+269)
#define __NR_arm_fadvise64_64 (__NR_SYSCALL_BASE+270)
#define __NR_pciconfig_iobase (__NR_SYSCALL_BASE+271)
#define __NR_pciconfig_read (__NR_SYSCALL_BASE+272)
#define __NR_pciconfig_write (__NR_SYSCALL_BASE+273)
#define __NR_mq_open (__NR_SYSCALL_BASE+274)
#define __NR_mq_unlink (__NR_SYSCALL_BASE+275)
#define __NR_mq_timedsend (__NR_SYSCALL_BASE+276)
#define __NR_mq_timedreceive (__NR_SYSCALL_BASE+277)
#define __NR_mq_notify (__NR_SYSCALL_BASE+278)
#define __NR_mq_getsetattr (__NR_SYSCALL_BASE+279)
#define __NR_waitid (__NR_SYSCALL_BASE+280)
#define __NR_socket (__NR_SYSCALL_BASE+281)
#define __NR_bind (__NR_SYSCALL_BASE+282)
#define __NR_connect (__NR_SYSCALL_BASE+283)
#define __NR_listen (__NR_SYSCALL_BASE+284)
#define __NR_accept (__NR_SYSCALL_BASE+285)
#define __NR_getsockname (__NR_SYSCALL_BASE+286)
#define __NR_getpeername (__NR_SYSCALL_BASE+287)
#define __NR_socketpair (__NR_SYSCALL_BASE+288)
#define __NR_send (__NR_SYSCALL_BASE+289)
#define __NR_sendto (__NR_SYSCALL_BASE+290)
#define __NR_recv (__NR_SYSCALL_BASE+291)
#define __NR_recvfrom (__NR_SYSCALL_BASE+292)
#define __NR_shutdown (__NR_SYSCALL_BASE+293)
#define __NR_setsockopt (__NR_SYSCALL_BASE+294)
#define __NR_getsockopt (__NR_SYSCALL_BASE+295)
#define __NR_sendmsg (__NR_SYSCALL_BASE+296)
#define __NR_recvmsg (__NR_SYSCALL_BASE+297)
#define __NR_semop (__NR_SYSCALL_BASE+298)
#define __NR_semget (__NR_SYSCALL_BASE+299)
#define __NR_semctl (__NR_SYSCALL_BASE+300)
#define __NR_msgsnd (__NR_SYSCALL_BASE+301)
#define __NR_msgrcv (__NR_SYSCALL_BASE+302)
#define __NR_msgget (__NR_SYSCALL_BASE+303)
#define __NR_msgctl (__NR_SYSCALL_BASE+304)
#define __NR_shmat (__NR_SYSCALL_BASE+305)
#define __NR_shmdt (__NR_SYSCALL_BASE+306)
#define __NR_shmget (__NR_SYSCALL_BASE+307)
#define __NR_shmctl (__NR_SYSCALL_BASE+308)
#define __NR_add_key (__NR_SYSCALL_BASE+309)
#define __NR_request_key (__NR_SYSCALL_BASE+310)
#define __NR_keyctl (__NR_SYSCALL_BASE+311)
#define __NR_semtimedop (__NR_SYSCALL_BASE+312)
#define __NR_vserver (__NR_SYSCALL_BASE+313)
#define __NR_ioprio_set (__NR_SYSCALL_BASE+314)
#define __NR_ioprio_get (__NR_SYSCALL_BASE+315)
#define __NR_inotify_init (__NR_SYSCALL_BASE+316)
#define __NR_inotify_add_watch (__NR_SYSCALL_BASE+317)
#define __NR_inotify_rm_watch (__NR_SYSCALL_BASE+318)
#define __NR_mbind (__NR_SYSCALL_BASE+319)
#define __NR_get_mempolicy (__NR_SYSCALL_BASE+320)
#define __NR_set_mempolicy (__NR_SYSCALL_BASE+321)
#define __NR_openat (__NR_SYSCALL_BASE+322)
#define __NR_mkdirat (__NR_SYSCALL_BASE+323)
#define __NR_mknodat (__NR_SYSCALL_BASE+324)
#define __NR_fchownat (__NR_SYSCALL_BASE+325)
#define __NR_futimesat (__NR_SYSCALL_BASE+326)
#define __NR_fstatat64 (__NR_SYSCALL_BASE+327)
#define __NR_unlinkat (__NR_SYSCALL_BASE+328)
#define __NR_renameat (__NR_SYSCALL_BASE+329)
#define __NR_linkat (__NR_SYSCALL_BASE+330)
#define __NR_symlinkat (__NR_SYSCALL_BASE+331)
#define __NR_readlinkat (__NR_SYSCALL_BASE+332)
#define __NR_fchmodat (__NR_SYSCALL_BASE+333)
#define __NR_faccessat (__NR_SYSCALL_BASE+334)
#define __NR_pselect6 (__NR_SYSCALL_BASE+335)
#define __NR_ppoll (__NR_SYSCALL_BASE+336)
#define __NR_unshare (__NR_SYSCALL_BASE+337)
#define __NR_set_robust_list (__NR_SYSCALL_BASE+338)
#define __NR_get_robust_list (__NR_SYSCALL_BASE+339)
#define __NR_splice (__NR_SYSCALL_BASE+340)
#define __NR_arm_sync_file_range (__NR_SYSCALL_BASE+341)
#define __NR_sync_file_range2 __NR_arm_sync_file_range
#define __NR_tee (__NR_SYSCALL_BASE+342)
#define __NR_vmsplice (__NR_SYSCALL_BASE+343)
#define __NR_move_pages (__NR_SYSCALL_BASE+344)
#define __NR_getcpu (__NR_SYSCALL_BASE+345)
#define __NR_epoll_pwait (__NR_SYSCALL_BASE+346)
#define __NR_kexec_load (__NR_SYSCALL_BASE+347)
#define __NR_utimensat (__NR_SYSCALL_BASE+348)
#define __NR_signalfd (__NR_SYSCALL_BASE+349)
#define __NR_timerfd_create (__NR_SYSCALL_BASE+350)
#define __NR_eventfd (__NR_SYSCALL_BASE+351)
#define __NR_fallocate (__NR_SYSCALL_BASE+352)
#define __NR_timerfd_settime (__NR_SYSCALL_BASE+353)
#define __NR_timerfd_gettime (__NR_SYSCALL_BASE+354)
#define __NR_signalfd4 (__NR_SYSCALL_BASE+355)
#define __NR_eventfd2 (__NR_SYSCALL_BASE+356)
#define __NR_epoll_create1 (__NR_SYSCALL_BASE+357)
#define __NR_dup3 (__NR_SYSCALL_BASE+358)
#define __NR_pipe2 (__NR_SYSCALL_BASE+359)
#define __NR_inotify_init1 (__NR_SYSCALL_BASE+360)
#define __NR_preadv (__NR_SYSCALL_BASE+361)
#define __NR_pwritev (__NR_SYSCALL_BASE+362)
#define __NR_rt_tgsigqueueinfo (__NR_SYSCALL_BASE+363)
#define __NR_perf_event_open (__NR_SYSCALL_BASE+364)
#define __NR_recvmmsg (__NR_SYSCALL_BASE+365)
#define __NR_accept4 (__NR_SYSCALL_BASE+366)
#define __NR_fanotify_init (__NR_SYSCALL_BASE+367)
#define __NR_fanotify_mark (__NR_SYSCALL_BASE+368)
#define __NR_prlimit64 (__NR_SYSCALL_BASE+369)
#define __NR_name_to_handle_at (__NR_SYSCALL_BASE+370)
#define __NR_open_by_handle_at (__NR_SYSCALL_BASE+371)
#define __NR_clock_adjtime (__NR_SYSCALL_BASE+372)
#define __NR_syncfs (__NR_SYSCALL_BASE+373)
#define __NR_sendmmsg (__NR_SYSCALL_BASE+374)
#define __NR_setns (__NR_SYSCALL_BASE+375)
#define __NR_process_vm_readv (__NR_SYSCALL_BASE+376)
#define __NR_process_vm_writev (__NR_SYSCALL_BASE+377)
/* 378 for kcmp */
/*
* This may need to be greater than __NR_last_syscall+1 in order to
* account for the padding in the syscall table
*/
#ifdef __KERNEL__
#define __NR_syscalls (380)
#endif /* __KERNEL__ */
/*
* The following SWIs are ARM private.
*/
#define __ARM_NR_BASE (__NR_SYSCALL_BASE+0x0f0000)
#define __ARM_NR_breakpoint (__ARM_NR_BASE+1)
#define __ARM_NR_cacheflush (__ARM_NR_BASE+2)
#define __ARM_NR_usr26 (__ARM_NR_BASE+3)
#define __ARM_NR_usr32 (__ARM_NR_BASE+4)
#define __ARM_NR_set_tls (__ARM_NR_BASE+5)
/*
* *NOTE*: This is a ghost syscall private to the kernel. Only the
* __kuser_cmpxchg code in entry-armv.S should be aware of its
* existence. Don't ever use this from user code.
*/
#ifdef __KERNEL__
#define __ARM_NR_cmpxchg (__ARM_NR_BASE+0x00fff0)
#endif
/*
* The following syscalls are obsolete and no longer available for EABI.
*/
#if !defined(__KERNEL__)
#if defined(__ARM_EABI__)
#undef __NR_time
#undef __NR_umount
#undef __NR_stime
#undef __NR_alarm
#undef __NR_utime
#undef __NR_getrlimit
#undef __NR_select
#undef __NR_readdir
#undef __NR_mmap
#undef __NR_socketcall
#undef __NR_syscall
#undef __NR_ipc
#endif
#endif
#ifdef __KERNEL__
#define __ARCH_WANT_STAT64
#define __ARCH_WANT_SYS_GETHOSTNAME
......@@ -495,5 +58,4 @@
#define __IGNORE_migrate_pages
#define __IGNORE_kcmp
#endif /* __KERNEL__ */
#endif /* __ASM_ARM_UNISTD_H */
arch/arm/include/uapi/asm/Kbuild
浏览文件 @ 1e91adf7
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
header-y += a.out.h
header-y += byteorder.h
header-y += fcntl.h
header-y += hwcap.h
header-y += ioctls.h
header-y += kvm_para.h
header-y += mman.h
header-y += posix_types.h
header-y += ptrace.h
header-y += setup.h
header-y += sigcontext.h
header-y += signal.h
header-y += stat.h
header-y += statfs.h
header-y += swab.h
header-y += unistd.h
arch/arm/include/uapi/asm/hwcap.h 0 → 100644
浏览文件 @ 1e91adf7
#ifndef _UAPI__ASMARM_HWCAP_H
#define _UAPI__ASMARM_HWCAP_H
/*
* HWCAP flags - for elf_hwcap (in kernel) and AT_HWCAP
*/
#define HWCAP_SWP (1 << 0)
#define HWCAP_HALF (1 << 1)
#define HWCAP_THUMB (1 << 2)
#define HWCAP_26BIT (1 << 3) /* Play it safe */
#define HWCAP_FAST_MULT (1 << 4)
#define HWCAP_FPA (1 << 5)
#define HWCAP_VFP (1 << 6)
#define HWCAP_EDSP (1 << 7)
#define HWCAP_JAVA (1 << 8)
#define HWCAP_IWMMXT (1 << 9)
#define HWCAP_CRUNCH (1 << 10)
#define HWCAP_THUMBEE (1 << 11)
#define HWCAP_NEON (1 << 12)
#define HWCAP_VFPv3 (1 << 13)
#define HWCAP_VFPv3D16 (1 << 14)
#define HWCAP_TLS (1 << 15)
#define HWCAP_VFPv4 (1 << 16)
#define HWCAP_IDIVA (1 << 17)
#define HWCAP_IDIVT (1 << 18)
#define HWCAP_IDIV (HWCAP_IDIVA | HWCAP_IDIVT)
#endif /* _UAPI__ASMARM_HWCAP_H */
arch/arm/include/uapi/asm/ptrace.h 0 → 100644
浏览文件 @ 1e91adf7
/*
* arch/arm/include/asm/ptrace.h
*
* Copyright (C) 1996-2003 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _UAPI__ASM_ARM_PTRACE_H
#define _UAPI__ASM_ARM_PTRACE_H
#include <asm/hwcap.h>
#define PTRACE_GETREGS 12
#define PTRACE_SETREGS 13
#define PTRACE_GETFPREGS 14
#define PTRACE_SETFPREGS 15
/* PTRACE_ATTACH is 16 */
/* PTRACE_DETACH is 17 */
#define PTRACE_GETWMMXREGS 18
#define PTRACE_SETWMMXREGS 19
/* 20 is unused */
#define PTRACE_OLDSETOPTIONS 21
#define PTRACE_GET_THREAD_AREA 22
#define PTRACE_SET_SYSCALL 23
/* PTRACE_SYSCALL is 24 */
#define PTRACE_GETCRUNCHREGS 25
#define PTRACE_SETCRUNCHREGS 26
#define PTRACE_GETVFPREGS 27
#define PTRACE_SETVFPREGS 28
#define PTRACE_GETHBPREGS 29
#define PTRACE_SETHBPREGS 30
/*
* PSR bits
*/
#define USR26_MODE 0x00000000
#define FIQ26_MODE 0x00000001
#define IRQ26_MODE 0x00000002
#define SVC26_MODE 0x00000003
#define USR_MODE 0x00000010
#define FIQ_MODE 0x00000011
#define IRQ_MODE 0x00000012
#define SVC_MODE 0x00000013
#define ABT_MODE 0x00000017
#define HYP_MODE 0x0000001a
#define UND_MODE 0x0000001b
#define SYSTEM_MODE 0x0000001f
#define MODE32_BIT 0x00000010
#define MODE_MASK 0x0000001f
#define PSR_T_BIT 0x00000020
#define PSR_F_BIT 0x00000040
#define PSR_I_BIT 0x00000080
#define PSR_A_BIT 0x00000100
#define PSR_E_BIT 0x00000200
#define PSR_J_BIT 0x01000000
#define PSR_Q_BIT 0x08000000
#define PSR_V_BIT 0x10000000
#define PSR_C_BIT 0x20000000
#define PSR_Z_BIT 0x40000000
#define PSR_N_BIT 0x80000000
/*
* Groups of PSR bits
*/
#define PSR_f 0xff000000 /* Flags */
#define PSR_s 0x00ff0000 /* Status */
#define PSR_x 0x0000ff00 /* Extension */
#define PSR_c 0x000000ff /* Control */
/*
* ARMv7 groups of PSR bits
*/
#define APSR_MASK 0xf80f0000 /* N, Z, C, V, Q and GE flags */
#define PSR_ISET_MASK 0x01000010 /* ISA state (J, T) mask */
#define PSR_IT_MASK 0x0600fc00 /* If-Then execution state mask */
#define PSR_ENDIAN_MASK 0x00000200 /* Endianness state mask */
/*
* Default endianness state
*/
#ifdef CONFIG_CPU_ENDIAN_BE8
#define PSR_ENDSTATE PSR_E_BIT
#else
#define PSR_ENDSTATE 0
#endif
/*
* These are 'magic' values for PTRACE_PEEKUSR that return info about where a
* process is located in memory.
*/
#define PT_TEXT_ADDR 0x10000
#define PT_DATA_ADDR 0x10004
#define PT_TEXT_END_ADDR 0x10008
#ifndef __ASSEMBLY__
/*
* This struct defines the way the registers are stored on the
* stack during a system call. Note that sizeof(struct pt_regs)
* has to be a multiple of 8.
*/
#ifndef __KERNEL__
struct pt_regs {
long uregs[18];
};
#endif /* __KERNEL__ */
#define ARM_cpsr uregs[16]
#define ARM_pc uregs[15]
#define ARM_lr uregs[14]
#define ARM_sp uregs[13]
#define ARM_ip uregs[12]
#define ARM_fp uregs[11]
#define ARM_r10 uregs[10]
#define ARM_r9 uregs[9]
#define ARM_r8 uregs[8]
#define ARM_r7 uregs[7]
#define ARM_r6 uregs[6]
#define ARM_r5 uregs[5]
#define ARM_r4 uregs[4]
#define ARM_r3 uregs[3]
#define ARM_r2 uregs[2]
#define ARM_r1 uregs[1]
#define ARM_r0 uregs[0]
#define ARM_ORIG_r0 uregs[17]
/*
* The size of the user-visible VFP state as seen by PTRACE_GET/SETVFPREGS
* and core dumps.
*/
#define ARM_VFPREGS_SIZE ( 32 * 8 /*fpregs*/ + 4 /*fpscr*/ )
#endif /* __ASSEMBLY__ */
#endif /* _UAPI__ASM_ARM_PTRACE_H */
arch/arm/include/uapi/asm/setup.h 0 → 100644
浏览文件 @ 1e91adf7
/*
* linux/include/asm/setup.h
*
* Copyright (C) 1997-1999 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Structure passed to kernel to tell it about the
* hardware it's running on. See Documentation/arm/Setup
* for more info.
*/
#ifndef _UAPI__ASMARM_SETUP_H
#define _UAPI__ASMARM_SETUP_H
#include <linux/types.h>
#define COMMAND_LINE_SIZE 1024
/* The list ends with an ATAG_NONE node. */
#define ATAG_NONE 0x00000000
struct tag_header {
__u32 size;
__u32 tag;
};
/* The list must start with an ATAG_CORE node */
#define ATAG_CORE 0x54410001
struct tag_core {
__u32 flags; /* bit 0 = read-only */
__u32 pagesize;
__u32 rootdev;
};
/* it is allowed to have multiple ATAG_MEM nodes */
#define ATAG_MEM 0x54410002
struct tag_mem32 {
__u32 size;
__u32 start; /* physical start address */
};
/* VGA text type displays */
#define ATAG_VIDEOTEXT 0x54410003
struct tag_videotext {
__u8 x;
__u8 y;
__u16 video_page;
__u8 video_mode;
__u8 video_cols;
__u16 video_ega_bx;
__u8 video_lines;
__u8 video_isvga;
__u16 video_points;
};
/* describes how the ramdisk will be used in kernel */
#define ATAG_RAMDISK 0x54410004
struct tag_ramdisk {
__u32 flags; /* bit 0 = load, bit 1 = prompt */
__u32 size; /* decompressed ramdisk size in _kilo_ bytes */
__u32 start; /* starting block of floppy-based RAM disk image */
};
/* describes where the compressed ramdisk image lives (virtual address) */
/*
* this one accidentally used virtual addresses - as such,
* it's deprecated.
*/
#define ATAG_INITRD 0x54410005
/* describes where the compressed ramdisk image lives (physical address) */
#define ATAG_INITRD2 0x54420005
struct tag_initrd {
__u32 start; /* physical start address */
__u32 size; /* size of compressed ramdisk image in bytes */
};
/* board serial number. "64 bits should be enough for everybody" */
#define ATAG_SERIAL 0x54410006
struct tag_serialnr {
__u32 low;
__u32 high;
};
/* board revision */
#define ATAG_REVISION 0x54410007
struct tag_revision {
__u32 rev;
};
/* initial values for vesafb-type framebuffers. see struct screen_info
* in include/linux/tty.h
*/
#define ATAG_VIDEOLFB 0x54410008
struct tag_videolfb {
__u16 lfb_width;
__u16 lfb_height;
__u16 lfb_depth;
__u16 lfb_linelength;
__u32 lfb_base;
__u32 lfb_size;
__u8 red_size;
__u8 red_pos;
__u8 green_size;
__u8 green_pos;
__u8 blue_size;
__u8 blue_pos;
__u8 rsvd_size;
__u8 rsvd_pos;
};
/* command line: \0 terminated string */
#define ATAG_CMDLINE 0x54410009
struct tag_cmdline {
char cmdline[1]; /* this is the minimum size */
};
/* acorn RiscPC specific information */
#define ATAG_ACORN 0x41000101
struct tag_acorn {
__u32 memc_control_reg;
__u32 vram_pages;
__u8 sounddefault;
__u8 adfsdrives;
};
/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */
#define ATAG_MEMCLK 0x41000402
struct tag_memclk {
__u32 fmemclk;
};
struct tag {
struct tag_header hdr;
union {
struct tag_core core;
struct tag_mem32 mem;
struct tag_videotext videotext;
struct tag_ramdisk ramdisk;
struct tag_initrd initrd;
struct tag_serialnr serialnr;
struct tag_revision revision;
struct tag_videolfb videolfb;
struct tag_cmdline cmdline;
/*
* Acorn specific
*/
struct tag_acorn acorn;
/*
* DC21285 specific
*/
struct tag_memclk memclk;
} u;
};
struct tagtable {
__u32 tag;
int (*parse)(const struct tag *);
};
#define tag_member_present(tag,member) \
((unsigned long)(&((struct tag *)0L)->member + 1) \
<= (tag)->hdr.size * 4)
#define tag_next(t) ((struct tag *)((__u32 *)(t) + (t)->hdr.size))
#define tag_size(type) ((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
#define for_each_tag(t,base) \
for (t = base; t->hdr.size; t = tag_next(t))
#endif /* _UAPI__ASMARM_SETUP_H */
arch/arm/include/uapi/asm/signal.h 0 → 100644
浏览文件 @ 1e91adf7
#ifndef _UAPI_ASMARM_SIGNAL_H
#define _UAPI_ASMARM_SIGNAL_H
#include <linux/types.h>
/* Avoid too many header ordering problems. */
struct siginfo;
#ifndef __KERNEL__
/* Here we must cater to libcs that poke about in kernel headers. */
#define NSIG 32
typedef unsigned long sigset_t;
#endif /* __KERNEL__ */
#define SIGHUP 1
#define SIGINT 2
#define SIGQUIT 3
#define SIGILL 4
#define SIGTRAP 5
#define SIGABRT 6
#define SIGIOT 6
#define SIGBUS 7
#define SIGFPE 8
#define SIGKILL 9
#define SIGUSR1 10
#define SIGSEGV 11
#define SIGUSR2 12
#define SIGPIPE 13
#define SIGALRM 14
#define SIGTERM 15
#define SIGSTKFLT 16
#define SIGCHLD 17
#define SIGCONT 18
#define SIGSTOP 19
#define SIGTSTP 20
#define SIGTTIN 21
#define SIGTTOU 22
#define SIGURG 23
#define SIGXCPU 24
#define SIGXFSZ 25
#define SIGVTALRM 26
#define SIGPROF 27
#define SIGWINCH 28
#define SIGIO 29
#define SIGPOLL SIGIO
/*
#define SIGLOST 29
*/
#define SIGPWR 30
#define SIGSYS 31
#define SIGUNUSED 31
/* These should not be considered constants from userland. */
#define SIGRTMIN 32
#define SIGRTMAX _NSIG
#define SIGSWI 32
/*
* SA_FLAGS values:
*
* SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
* SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
* SA_SIGINFO deliver the signal with SIGINFO structs
* SA_THIRTYTWO delivers the signal in 32-bit mode, even if the task
* is running in 26-bit.
* SA_ONSTACK allows alternate signal stacks (see sigaltstack(2)).
* SA_RESTART flag to get restarting signals (which were the default long ago)
* SA_NODEFER prevents the current signal from being masked in the handler.
* SA_RESETHAND clears the handler when the signal is delivered.
*
* SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
* Unix names RESETHAND and NODEFER respectively.
*/
#define SA_NOCLDSTOP 0x00000001
#define SA_NOCLDWAIT 0x00000002
#define SA_SIGINFO 0x00000004
#define SA_THIRTYTWO 0x02000000
#define SA_RESTORER 0x04000000
#define SA_ONSTACK 0x08000000
#define SA_RESTART 0x10000000
#define SA_NODEFER 0x40000000
#define SA_RESETHAND 0x80000000
#define SA_NOMASK SA_NODEFER
#define SA_ONESHOT SA_RESETHAND
/*
* sigaltstack controls
*/
#define SS_ONSTACK 1
#define SS_DISABLE 2
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192
#include <asm-generic/signal-defs.h>
#ifndef __KERNEL__
/* Here we must cater to libcs that poke about in kernel headers. */
struct sigaction {
union {
__sighandler_t _sa_handler;
void (*_sa_sigaction)(int, struct siginfo *, void *);
} _u;
sigset_t sa_mask;
unsigned long sa_flags;
void (*sa_restorer)(void);
};
#define sa_handler _u._sa_handler
#define sa_sigaction _u._sa_sigaction
#endif /* __KERNEL__ */
typedef struct sigaltstack {
void __user *ss_sp;
int ss_flags;
size_t ss_size;
} stack_t;
#endif /* _UAPI_ASMARM_SIGNAL_H */
arch/arm/include/uapi/asm/swab.h 0 → 100644
浏览文件 @ 1e91adf7
/*
* arch/arm/include/asm/byteorder.h
*
* ARM Endian-ness. In little endian mode, the data bus is connected such
* that byte accesses appear as:
* 0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31
* and word accesses (data or instruction) appear as:
* d0...d31
*
* When in big endian mode, byte accesses appear as:
* 0 = d24...d31, 1 = d16...d23, 2 = d8...d15, 3 = d0...d7
* and word accesses (data or instruction) appear as:
* d0...d31
*/
#ifndef _UAPI__ASM_ARM_SWAB_H
#define _UAPI__ASM_ARM_SWAB_H
#include <linux/compiler.h>
#include <linux/types.h>
#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
# define __SWAB_64_THRU_32__
#endif
#if !defined(__KERNEL__) || __LINUX_ARM_ARCH__ < 6
static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
{
__u32 t;
#ifndef __thumb__
if (!__builtin_constant_p(x)) {
/*
* The compiler needs a bit of a hint here to always do the
* right thing and not screw it up to different degrees
* depending on the gcc version.
*/
asm ("eor\t%0, %1, %1, ror #16" : "=r" (t) : "r" (x));
} else
#endif
t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */
x = (x << 24) | (x >> 8); /* mov r0,r0,ror #8 */
t &= ~0x00FF0000; /* bic r1,r1,#0x00FF0000 */
x ^= (t >> 8); /* eor r0,r0,r1,lsr #8 */
return x;
}
#define __arch_swab32 __arch_swab32
#endif
#endif /* _UAPI__ASM_ARM_SWAB_H */
arch/arm/include/uapi/asm/unistd.h 0 → 100644
浏览文件 @ 1e91adf7
/*
* arch/arm/include/asm/unistd.h
*
* Copyright (C) 2001-2005 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Please forward _all_ changes to this file to rmk@arm.linux.org.uk,
* no matter what the change is. Thanks!
*/
#ifndef _UAPI__ASM_ARM_UNISTD_H
#define _UAPI__ASM_ARM_UNISTD_H
#define __NR_OABI_SYSCALL_BASE 0x900000
#if defined(__thumb__) || defined(__ARM_EABI__)
#define __NR_SYSCALL_BASE 0
#else
#define __NR_SYSCALL_BASE __NR_OABI_SYSCALL_BASE
#endif
/*
* This file contains the system call numbers.
*/
#define __NR_restart_syscall (__NR_SYSCALL_BASE+ 0)
#define __NR_exit (__NR_SYSCALL_BASE+ 1)
#define __NR_fork (__NR_SYSCALL_BASE+ 2)
#define __NR_read (__NR_SYSCALL_BASE+ 3)
#define __NR_write (__NR_SYSCALL_BASE+ 4)
#define __NR_open (__NR_SYSCALL_BASE+ 5)
#define __NR_close (__NR_SYSCALL_BASE+ 6)
/* 7 was sys_waitpid */
#define __NR_creat (__NR_SYSCALL_BASE+ 8)
#define __NR_link (__NR_SYSCALL_BASE+ 9)
#define __NR_unlink (__NR_SYSCALL_BASE+ 10)
#define __NR_execve (__NR_SYSCALL_BASE+ 11)
#define __NR_chdir (__NR_SYSCALL_BASE+ 12)
#define __NR_time (__NR_SYSCALL_BASE+ 13)
#define __NR_mknod (__NR_SYSCALL_BASE+ 14)
#define __NR_chmod (__NR_SYSCALL_BASE+ 15)
#define __NR_lchown (__NR_SYSCALL_BASE+ 16)
/* 17 was sys_break */
/* 18 was sys_stat */
#define __NR_lseek (__NR_SYSCALL_BASE+ 19)
#define __NR_getpid (__NR_SYSCALL_BASE+ 20)
#define __NR_mount (__NR_SYSCALL_BASE+ 21)
#define __NR_umount (__NR_SYSCALL_BASE+ 22)
#define __NR_setuid (__NR_SYSCALL_BASE+ 23)
#define __NR_getuid (__NR_SYSCALL_BASE+ 24)
#define __NR_stime (__NR_SYSCALL_BASE+ 25)
#define __NR_ptrace (__NR_SYSCALL_BASE+ 26)
#define __NR_alarm (__NR_SYSCALL_BASE+ 27)
/* 28 was sys_fstat */
#define __NR_pause (__NR_SYSCALL_BASE+ 29)
#define __NR_utime (__NR_SYSCALL_BASE+ 30)
/* 31 was sys_stty */
/* 32 was sys_gtty */
#define __NR_access (__NR_SYSCALL_BASE+ 33)
#define __NR_nice (__NR_SYSCALL_BASE+ 34)
/* 35 was sys_ftime */
#define __NR_sync (__NR_SYSCALL_BASE+ 36)
#define __NR_kill (__NR_SYSCALL_BASE+ 37)
#define __NR_rename (__NR_SYSCALL_BASE+ 38)
#define __NR_mkdir (__NR_SYSCALL_BASE+ 39)
#define __NR_rmdir (__NR_SYSCALL_BASE+ 40)
#define __NR_dup (__NR_SYSCALL_BASE+ 41)
#define __NR_pipe (__NR_SYSCALL_BASE+ 42)
#define __NR_times (__NR_SYSCALL_BASE+ 43)
/* 44 was sys_prof */
#define __NR_brk (__NR_SYSCALL_BASE+ 45)
#define __NR_setgid (__NR_SYSCALL_BASE+ 46)
#define __NR_getgid (__NR_SYSCALL_BASE+ 47)
/* 48 was sys_signal */
#define __NR_geteuid (__NR_SYSCALL_BASE+ 49)
#define __NR_getegid (__NR_SYSCALL_BASE+ 50)
#define __NR_acct (__NR_SYSCALL_BASE+ 51)
#define __NR_umount2 (__NR_SYSCALL_BASE+ 52)
/* 53 was sys_lock */
#define __NR_ioctl (__NR_SYSCALL_BASE+ 54)
#define __NR_fcntl (__NR_SYSCALL_BASE+ 55)
/* 56 was sys_mpx */
#define __NR_setpgid (__NR_SYSCALL_BASE+ 57)
/* 58 was sys_ulimit */
/* 59 was sys_olduname */
#define __NR_umask (__NR_SYSCALL_BASE+ 60)
#define __NR_chroot (__NR_SYSCALL_BASE+ 61)
#define __NR_ustat (__NR_SYSCALL_BASE+ 62)
#define __NR_dup2 (__NR_SYSCALL_BASE+ 63)
#define __NR_getppid (__NR_SYSCALL_BASE+ 64)
#define __NR_getpgrp (__NR_SYSCALL_BASE+ 65)
#define __NR_setsid (__NR_SYSCALL_BASE+ 66)
#define __NR_sigaction (__NR_SYSCALL_BASE+ 67)
/* 68 was sys_sgetmask */
/* 69 was sys_ssetmask */
#define __NR_setreuid (__NR_SYSCALL_BASE+ 70)
#define __NR_setregid (__NR_SYSCALL_BASE+ 71)
#define __NR_sigsuspend (__NR_SYSCALL_BASE+ 72)
#define __NR_sigpending (__NR_SYSCALL_BASE+ 73)
#define __NR_sethostname (__NR_SYSCALL_BASE+ 74)
#define __NR_setrlimit (__NR_SYSCALL_BASE+ 75)
#define __NR_getrlimit (__NR_SYSCALL_BASE+ 76) /* Back compat 2GB limited rlimit */
#define __NR_getrusage (__NR_SYSCALL_BASE+ 77)
#define __NR_gettimeofday (__NR_SYSCALL_BASE+ 78)
#define __NR_settimeofday (__NR_SYSCALL_BASE+ 79)
#define __NR_getgroups (__NR_SYSCALL_BASE+ 80)
#define __NR_setgroups (__NR_SYSCALL_BASE+ 81)
#define __NR_select (__NR_SYSCALL_BASE+ 82)
#define __NR_symlink (__NR_SYSCALL_BASE+ 83)
/* 84 was sys_lstat */
#define __NR_readlink (__NR_SYSCALL_BASE+ 85)
#define __NR_uselib (__NR_SYSCALL_BASE+ 86)
#define __NR_swapon (__NR_SYSCALL_BASE+ 87)
#define __NR_reboot (__NR_SYSCALL_BASE+ 88)
#define __NR_readdir (__NR_SYSCALL_BASE+ 89)
#define __NR_mmap (__NR_SYSCALL_BASE+ 90)
#define __NR_munmap (__NR_SYSCALL_BASE+ 91)
#define __NR_truncate (__NR_SYSCALL_BASE+ 92)
#define __NR_ftruncate (__NR_SYSCALL_BASE+ 93)
#define __NR_fchmod (__NR_SYSCALL_BASE+ 94)
#define __NR_fchown (__NR_SYSCALL_BASE+ 95)
#define __NR_getpriority (__NR_SYSCALL_BASE+ 96)
#define __NR_setpriority (__NR_SYSCALL_BASE+ 97)
/* 98 was sys_profil */
#define __NR_statfs (__NR_SYSCALL_BASE+ 99)
#define __NR_fstatfs (__NR_SYSCALL_BASE+100)
/* 101 was sys_ioperm */
#define __NR_socketcall (__NR_SYSCALL_BASE+102)
#define __NR_syslog (__NR_SYSCALL_BASE+103)
#define __NR_setitimer (__NR_SYSCALL_BASE+104)
#define __NR_getitimer (__NR_SYSCALL_BASE+105)
#define __NR_stat (__NR_SYSCALL_BASE+106)
#define __NR_lstat (__NR_SYSCALL_BASE+107)
#define __NR_fstat (__NR_SYSCALL_BASE+108)
/* 109 was sys_uname */
/* 110 was sys_iopl */
#define __NR_vhangup (__NR_SYSCALL_BASE+111)
/* 112 was sys_idle */
#define __NR_syscall (__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */
#define __NR_wait4 (__NR_SYSCALL_BASE+114)
#define __NR_swapoff (__NR_SYSCALL_BASE+115)
#define __NR_sysinfo (__NR_SYSCALL_BASE+116)
#define __NR_ipc (__NR_SYSCALL_BASE+117)
#define __NR_fsync (__NR_SYSCALL_BASE+118)
#define __NR_sigreturn (__NR_SYSCALL_BASE+119)
#define __NR_clone (__NR_SYSCALL_BASE+120)
#define __NR_setdomainname (__NR_SYSCALL_BASE+121)
#define __NR_uname (__NR_SYSCALL_BASE+122)
/* 123 was sys_modify_ldt */
#define __NR_adjtimex (__NR_SYSCALL_BASE+124)
#define __NR_mprotect (__NR_SYSCALL_BASE+125)
#define __NR_sigprocmask (__NR_SYSCALL_BASE+126)
/* 127 was sys_create_module */
#define __NR_init_module (__NR_SYSCALL_BASE+128)
#define __NR_delete_module (__NR_SYSCALL_BASE+129)
/* 130 was sys_get_kernel_syms */
#define __NR_quotactl (__NR_SYSCALL_BASE+131)
#define __NR_getpgid (__NR_SYSCALL_BASE+132)
#define __NR_fchdir (__NR_SYSCALL_BASE+133)
#define __NR_bdflush (__NR_SYSCALL_BASE+134)
#define __NR_sysfs (__NR_SYSCALL_BASE+135)
#define __NR_personality (__NR_SYSCALL_BASE+136)
/* 137 was sys_afs_syscall */
#define __NR_setfsuid (__NR_SYSCALL_BASE+138)
#define __NR_setfsgid (__NR_SYSCALL_BASE+139)
#define __NR__llseek (__NR_SYSCALL_BASE+140)
#define __NR_getdents (__NR_SYSCALL_BASE+141)
#define __NR__newselect (__NR_SYSCALL_BASE+142)
#define __NR_flock (__NR_SYSCALL_BASE+143)
#define __NR_msync (__NR_SYSCALL_BASE+144)
#define __NR_readv (__NR_SYSCALL_BASE+145)
#define __NR_writev (__NR_SYSCALL_BASE+146)
#define __NR_getsid (__NR_SYSCALL_BASE+147)
#define __NR_fdatasync (__NR_SYSCALL_BASE+148)
#define __NR__sysctl (__NR_SYSCALL_BASE+149)
#define __NR_mlock (__NR_SYSCALL_BASE+150)
#define __NR_munlock (__NR_SYSCALL_BASE+151)
#define __NR_mlockall (__NR_SYSCALL_BASE+152)
#define __NR_munlockall (__NR_SYSCALL_BASE+153)
#define __NR_sched_setparam (__NR_SYSCALL_BASE+154)
#define __NR_sched_getparam (__NR_SYSCALL_BASE+155)
#define __NR_sched_setscheduler (__NR_SYSCALL_BASE+156)
#define __NR_sched_getscheduler (__NR_SYSCALL_BASE+157)
#define __NR_sched_yield (__NR_SYSCALL_BASE+158)
#define __NR_sched_get_priority_max (__NR_SYSCALL_BASE+159)
#define __NR_sched_get_priority_min (__NR_SYSCALL_BASE+160)
#define __NR_sched_rr_get_interval (__NR_SYSCALL_BASE+161)
#define __NR_nanosleep (__NR_SYSCALL_BASE+162)
#define __NR_mremap (__NR_SYSCALL_BASE+163)
#define __NR_setresuid (__NR_SYSCALL_BASE+164)
#define __NR_getresuid (__NR_SYSCALL_BASE+165)
/* 166 was sys_vm86 */
/* 167 was sys_query_module */
#define __NR_poll (__NR_SYSCALL_BASE+168)
#define __NR_nfsservctl (__NR_SYSCALL_BASE+169)
#define __NR_setresgid (__NR_SYSCALL_BASE+170)
#define __NR_getresgid (__NR_SYSCALL_BASE+171)
#define __NR_prctl (__NR_SYSCALL_BASE+172)
#define __NR_rt_sigreturn (__NR_SYSCALL_BASE+173)
#define __NR_rt_sigaction (__NR_SYSCALL_BASE+174)
#define __NR_rt_sigprocmask (__NR_SYSCALL_BASE+175)
#define __NR_rt_sigpending (__NR_SYSCALL_BASE+176)
#define __NR_rt_sigtimedwait (__NR_SYSCALL_BASE+177)
#define __NR_rt_sigqueueinfo (__NR_SYSCALL_BASE+178)
#define __NR_rt_sigsuspend (__NR_SYSCALL_BASE+179)
#define __NR_pread64 (__NR_SYSCALL_BASE+180)
#define __NR_pwrite64 (__NR_SYSCALL_BASE+181)
#define __NR_chown (__NR_SYSCALL_BASE+182)
#define __NR_getcwd (__NR_SYSCALL_BASE+183)
#define __NR_capget (__NR_SYSCALL_BASE+184)
#define __NR_capset (__NR_SYSCALL_BASE+185)
#define __NR_sigaltstack (__NR_SYSCALL_BASE+186)
#define __NR_sendfile (__NR_SYSCALL_BASE+187)
/* 188 reserved */
/* 189 reserved */
#define __NR_vfork (__NR_SYSCALL_BASE+190)
#define __NR_ugetrlimit (__NR_SYSCALL_BASE+191) /* SuS compliant getrlimit */
#define __NR_mmap2 (__NR_SYSCALL_BASE+192)
#define __NR_truncate64 (__NR_SYSCALL_BASE+193)
#define __NR_ftruncate64 (__NR_SYSCALL_BASE+194)
#define __NR_stat64 (__NR_SYSCALL_BASE+195)
#define __NR_lstat64 (__NR_SYSCALL_BASE+196)
#define __NR_fstat64 (__NR_SYSCALL_BASE+197)
#define __NR_lchown32 (__NR_SYSCALL_BASE+198)
#define __NR_getuid32 (__NR_SYSCALL_BASE+199)
#define __NR_getgid32 (__NR_SYSCALL_BASE+200)
#define __NR_geteuid32 (__NR_SYSCALL_BASE+201)
#define __NR_getegid32 (__NR_SYSCALL_BASE+202)
#define __NR_setreuid32 (__NR_SYSCALL_BASE+203)
#define __NR_setregid32 (__NR_SYSCALL_BASE+204)
#define __NR_getgroups32 (__NR_SYSCALL_BASE+205)
#define __NR_setgroups32 (__NR_SYSCALL_BASE+206)
#define __NR_fchown32 (__NR_SYSCALL_BASE+207)
#define __NR_setresuid32 (__NR_SYSCALL_BASE+208)
#define __NR_getresuid32 (__NR_SYSCALL_BASE+209)
#define __NR_setresgid32 (__NR_SYSCALL_BASE+210)
#define __NR_getresgid32 (__NR_SYSCALL_BASE+211)
#define __NR_chown32 (__NR_SYSCALL_BASE+212)
#define __NR_setuid32 (__NR_SYSCALL_BASE+213)
#define __NR_setgid32 (__NR_SYSCALL_BASE+214)
#define __NR_setfsuid32 (__NR_SYSCALL_BASE+215)
#define __NR_setfsgid32 (__NR_SYSCALL_BASE+216)
#define __NR_getdents64 (__NR_SYSCALL_BASE+217)
#define __NR_pivot_root (__NR_SYSCALL_BASE+218)
#define __NR_mincore (__NR_SYSCALL_BASE+219)
#define __NR_madvise (__NR_SYSCALL_BASE+220)
#define __NR_fcntl64 (__NR_SYSCALL_BASE+221)
/* 222 for tux */
/* 223 is unused */
#define __NR_gettid (__NR_SYSCALL_BASE+224)
#define __NR_readahead (__NR_SYSCALL_BASE+225)
#define __NR_setxattr (__NR_SYSCALL_BASE+226)
#define __NR_lsetxattr (__NR_SYSCALL_BASE+227)
#define __NR_fsetxattr (__NR_SYSCALL_BASE+228)
#define __NR_getxattr (__NR_SYSCALL_BASE+229)
#define __NR_lgetxattr (__NR_SYSCALL_BASE+230)
#define __NR_fgetxattr (__NR_SYSCALL_BASE+231)
#define __NR_listxattr (__NR_SYSCALL_BASE+232)
#define __NR_llistxattr (__NR_SYSCALL_BASE+233)
#define __NR_flistxattr (__NR_SYSCALL_BASE+234)
#define __NR_removexattr (__NR_SYSCALL_BASE+235)
#define __NR_lremovexattr (__NR_SYSCALL_BASE+236)
#define __NR_fremovexattr (__NR_SYSCALL_BASE+237)
#define __NR_tkill (__NR_SYSCALL_BASE+238)
#define __NR_sendfile64 (__NR_SYSCALL_BASE+239)
#define __NR_futex (__NR_SYSCALL_BASE+240)
#define __NR_sched_setaffinity (__NR_SYSCALL_BASE+241)
#define __NR_sched_getaffinity (__NR_SYSCALL_BASE+242)
#define __NR_io_setup (__NR_SYSCALL_BASE+243)
#define __NR_io_destroy (__NR_SYSCALL_BASE+244)
#define __NR_io_getevents (__NR_SYSCALL_BASE+245)
#define __NR_io_submit (__NR_SYSCALL_BASE+246)
#define __NR_io_cancel (__NR_SYSCALL_BASE+247)
#define __NR_exit_group (__NR_SYSCALL_BASE+248)
#define __NR_lookup_dcookie (__NR_SYSCALL_BASE+249)
#define __NR_epoll_create (__NR_SYSCALL_BASE+250)
#define __NR_epoll_ctl (__NR_SYSCALL_BASE+251)
#define __NR_epoll_wait (__NR_SYSCALL_BASE+252)
#define __NR_remap_file_pages (__NR_SYSCALL_BASE+253)
/* 254 for set_thread_area */
/* 255 for get_thread_area */
#define __NR_set_tid_address (__NR_SYSCALL_BASE+256)
#define __NR_timer_create (__NR_SYSCALL_BASE+257)
#define __NR_timer_settime (__NR_SYSCALL_BASE+258)
#define __NR_timer_gettime (__NR_SYSCALL_BASE+259)
#define __NR_timer_getoverrun (__NR_SYSCALL_BASE+260)
#define __NR_timer_delete (__NR_SYSCALL_BASE+261)
#define __NR_clock_settime (__NR_SYSCALL_BASE+262)
#define __NR_clock_gettime (__NR_SYSCALL_BASE+263)
#define __NR_clock_getres (__NR_SYSCALL_BASE+264)
#define __NR_clock_nanosleep (__NR_SYSCALL_BASE+265)
#define __NR_statfs64 (__NR_SYSCALL_BASE+266)
#define __NR_fstatfs64 (__NR_SYSCALL_BASE+267)
#define __NR_tgkill (__NR_SYSCALL_BASE+268)
#define __NR_utimes (__NR_SYSCALL_BASE+269)
#define __NR_arm_fadvise64_64 (__NR_SYSCALL_BASE+270)
#define __NR_pciconfig_iobase (__NR_SYSCALL_BASE+271)
#define __NR_pciconfig_read (__NR_SYSCALL_BASE+272)
#define __NR_pciconfig_write (__NR_SYSCALL_BASE+273)
#define __NR_mq_open (__NR_SYSCALL_BASE+274)
#define __NR_mq_unlink (__NR_SYSCALL_BASE+275)
#define __NR_mq_timedsend (__NR_SYSCALL_BASE+276)
#define __NR_mq_timedreceive (__NR_SYSCALL_BASE+277)
#define __NR_mq_notify (__NR_SYSCALL_BASE+278)
#define __NR_mq_getsetattr (__NR_SYSCALL_BASE+279)
#define __NR_waitid (__NR_SYSCALL_BASE+280)
#define __NR_socket (__NR_SYSCALL_BASE+281)
#define __NR_bind (__NR_SYSCALL_BASE+282)
#define __NR_connect (__NR_SYSCALL_BASE+283)
#define __NR_listen (__NR_SYSCALL_BASE+284)
#define __NR_accept (__NR_SYSCALL_BASE+285)
#define __NR_getsockname (__NR_SYSCALL_BASE+286)
#define __NR_getpeername (__NR_SYSCALL_BASE+287)
#define __NR_socketpair (__NR_SYSCALL_BASE+288)
#define __NR_send (__NR_SYSCALL_BASE+289)
#define __NR_sendto (__NR_SYSCALL_BASE+290)
#define __NR_recv (__NR_SYSCALL_BASE+291)
#define __NR_recvfrom (__NR_SYSCALL_BASE+292)
#define __NR_shutdown (__NR_SYSCALL_BASE+293)
#define __NR_setsockopt (__NR_SYSCALL_BASE+294)
#define __NR_getsockopt (__NR_SYSCALL_BASE+295)
#define __NR_sendmsg (__NR_SYSCALL_BASE+296)
#define __NR_recvmsg (__NR_SYSCALL_BASE+297)
#define __NR_semop (__NR_SYSCALL_BASE+298)
#define __NR_semget (__NR_SYSCALL_BASE+299)
#define __NR_semctl (__NR_SYSCALL_BASE+300)
#define __NR_msgsnd (__NR_SYSCALL_BASE+301)
#define __NR_msgrcv (__NR_SYSCALL_BASE+302)
#define __NR_msgget (__NR_SYSCALL_BASE+303)
#define __NR_msgctl (__NR_SYSCALL_BASE+304)
#define __NR_shmat (__NR_SYSCALL_BASE+305)
#define __NR_shmdt (__NR_SYSCALL_BASE+306)
#define __NR_shmget (__NR_SYSCALL_BASE+307)
#define __NR_shmctl (__NR_SYSCALL_BASE+308)
#define __NR_add_key (__NR_SYSCALL_BASE+309)
#define __NR_request_key (__NR_SYSCALL_BASE+310)
#define __NR_keyctl (__NR_SYSCALL_BASE+311)
#define __NR_semtimedop (__NR_SYSCALL_BASE+312)
#define __NR_vserver (__NR_SYSCALL_BASE+313)
#define __NR_ioprio_set (__NR_SYSCALL_BASE+314)
#define __NR_ioprio_get (__NR_SYSCALL_BASE+315)
#define __NR_inotify_init (__NR_SYSCALL_BASE+316)
#define __NR_inotify_add_watch (__NR_SYSCALL_BASE+317)
#define __NR_inotify_rm_watch (__NR_SYSCALL_BASE+318)
#define __NR_mbind (__NR_SYSCALL_BASE+319)
#define __NR_get_mempolicy (__NR_SYSCALL_BASE+320)
#define __NR_set_mempolicy (__NR_SYSCALL_BASE+321)
#define __NR_openat (__NR_SYSCALL_BASE+322)
#define __NR_mkdirat (__NR_SYSCALL_BASE+323)
#define __NR_mknodat (__NR_SYSCALL_BASE+324)
#define __NR_fchownat (__NR_SYSCALL_BASE+325)
#define __NR_futimesat (__NR_SYSCALL_BASE+326)
#define __NR_fstatat64 (__NR_SYSCALL_BASE+327)
#define __NR_unlinkat (__NR_SYSCALL_BASE+328)
#define __NR_renameat (__NR_SYSCALL_BASE+329)
#define __NR_linkat (__NR_SYSCALL_BASE+330)
#define __NR_symlinkat (__NR_SYSCALL_BASE+331)
#define __NR_readlinkat (__NR_SYSCALL_BASE+332)
#define __NR_fchmodat (__NR_SYSCALL_BASE+333)
#define __NR_faccessat (__NR_SYSCALL_BASE+334)
#define __NR_pselect6 (__NR_SYSCALL_BASE+335)
#define __NR_ppoll (__NR_SYSCALL_BASE+336)
#define __NR_unshare (__NR_SYSCALL_BASE+337)
#define __NR_set_robust_list (__NR_SYSCALL_BASE+338)
#define __NR_get_robust_list (__NR_SYSCALL_BASE+339)
#define __NR_splice (__NR_SYSCALL_BASE+340)
#define __NR_arm_sync_file_range (__NR_SYSCALL_BASE+341)
#define __NR_sync_file_range2 __NR_arm_sync_file_range
#define __NR_tee (__NR_SYSCALL_BASE+342)
#define __NR_vmsplice (__NR_SYSCALL_BASE+343)
#define __NR_move_pages (__NR_SYSCALL_BASE+344)
#define __NR_getcpu (__NR_SYSCALL_BASE+345)
#define __NR_epoll_pwait (__NR_SYSCALL_BASE+346)
#define __NR_kexec_load (__NR_SYSCALL_BASE+347)
#define __NR_utimensat (__NR_SYSCALL_BASE+348)
#define __NR_signalfd (__NR_SYSCALL_BASE+349)
#define __NR_timerfd_create (__NR_SYSCALL_BASE+350)
#define __NR_eventfd (__NR_SYSCALL_BASE+351)
#define __NR_fallocate (__NR_SYSCALL_BASE+352)
#define __NR_timerfd_settime (__NR_SYSCALL_BASE+353)
#define __NR_timerfd_gettime (__NR_SYSCALL_BASE+354)
#define __NR_signalfd4 (__NR_SYSCALL_BASE+355)
#define __NR_eventfd2 (__NR_SYSCALL_BASE+356)
#define __NR_epoll_create1 (__NR_SYSCALL_BASE+357)
#define __NR_dup3 (__NR_SYSCALL_BASE+358)
#define __NR_pipe2 (__NR_SYSCALL_BASE+359)
#define __NR_inotify_init1 (__NR_SYSCALL_BASE+360)
#define __NR_preadv (__NR_SYSCALL_BASE+361)
#define __NR_pwritev (__NR_SYSCALL_BASE+362)
#define __NR_rt_tgsigqueueinfo (__NR_SYSCALL_BASE+363)
#define __NR_perf_event_open (__NR_SYSCALL_BASE+364)
#define __NR_recvmmsg (__NR_SYSCALL_BASE+365)
#define __NR_accept4 (__NR_SYSCALL_BASE+366)
#define __NR_fanotify_init (__NR_SYSCALL_BASE+367)
#define __NR_fanotify_mark (__NR_SYSCALL_BASE+368)
#define __NR_prlimit64 (__NR_SYSCALL_BASE+369)
#define __NR_name_to_handle_at (__NR_SYSCALL_BASE+370)
#define __NR_open_by_handle_at (__NR_SYSCALL_BASE+371)
#define __NR_clock_adjtime (__NR_SYSCALL_BASE+372)
#define __NR_syncfs (__NR_SYSCALL_BASE+373)
#define __NR_sendmmsg (__NR_SYSCALL_BASE+374)
#define __NR_setns (__NR_SYSCALL_BASE+375)
#define __NR_process_vm_readv (__NR_SYSCALL_BASE+376)
#define __NR_process_vm_writev (__NR_SYSCALL_BASE+377)
/* 378 for kcmp */
/*
* This may need to be greater than __NR_last_syscall+1 in order to
* account for the padding in the syscall table
*/
/*
* The following SWIs are ARM private.
*/
#define __ARM_NR_BASE (__NR_SYSCALL_BASE+0x0f0000)
#define __ARM_NR_breakpoint (__ARM_NR_BASE+1)
#define __ARM_NR_cacheflush (__ARM_NR_BASE+2)
#define __ARM_NR_usr26 (__ARM_NR_BASE+3)
#define __ARM_NR_usr32 (__ARM_NR_BASE+4)
#define __ARM_NR_set_tls (__ARM_NR_BASE+5)
/*
* *NOTE*: This is a ghost syscall private to the kernel. Only the
* __kuser_cmpxchg code in entry-armv.S should be aware of its
* existence. Don't ever use this from user code.
*/
/*
* The following syscalls are obsolete and no longer available for EABI.
*/
#if !defined(__KERNEL__)
#if defined(__ARM_EABI__)
#undef __NR_time
#undef __NR_umount
#undef __NR_stime
#undef __NR_alarm
#undef __NR_utime
#undef __NR_getrlimit
#undef __NR_select
#undef __NR_readdir
#undef __NR_mmap
#undef __NR_socketcall
#undef __NR_syscall
#undef __NR_ipc
#endif
#endif
#endif /* _UAPI__ASM_ARM_UNISTD_H */
arch/arm/mach-at91/Kconfig
浏览文件 @ 1e91adf7
......@@ -19,8 +19,8 @@ config AT91_SAM9G45_RESET
config SOC_AT91SAM9
bool
select GENERIC_CLOCKEVENTS
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
menu "Atmel AT91 System-on-Chip"
......@@ -28,66 +28,66 @@ comment "Atmel AT91 Processor"
config SOC_AT91SAM9
bool
select AT91_SAM9_SMC
select AT91_SAM9_TIME
select CPU_ARM926T
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select AT91_SAM9_TIME
select AT91_SAM9_SMC
config SOC_AT91RM9200
bool "AT91RM9200"
select CPU_ARM920T
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select GENERIC_CLOCKEVENTS
select HAVE_AT91_DBGU0
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
config SOC_AT91SAM9260
bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select HAVE_NET_MACB
select SOC_AT91SAM9
help
Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
or AT91SAM9G20 SoC.
config SOC_AT91SAM9261
bool "AT91SAM9261 or AT91SAM9G10"
select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
select SOC_AT91SAM9
help
Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
config SOC_AT91SAM9263
bool "AT91SAM9263"
select SOC_AT91SAM9
select HAVE_AT91_DBGU1
select HAVE_FB_ATMEL
select HAVE_NET_MACB
select SOC_AT91SAM9
config SOC_AT91SAM9RL
bool "AT91SAM9RL"
select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
select SOC_AT91SAM9
config SOC_AT91SAM9G45
bool "AT91SAM9G45 or AT91SAM9M10 families"
select SOC_AT91SAM9
select HAVE_AT91_DBGU1
select HAVE_FB_ATMEL
select HAVE_NET_MACB
select SOC_AT91SAM9
help
Select this if you are using one of Atmel's AT91SAM9G45 family SoC.
This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
config SOC_AT91SAM9X5
bool "AT91SAM9x5 family"
select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
select HAVE_NET_MACB
select SOC_AT91SAM9
help
Select this if you are using one of Atmel's AT91SAM9x5 family SoC.
This means that your SAM9 name finishes with a '5' (except if it is
......@@ -97,9 +97,9 @@ config SOC_AT91SAM9X5
config SOC_AT91SAM9N12
bool "AT91SAM9N12 family"
select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
select SOC_AT91SAM9
help
Select this if you are using Atmel's AT91SAM9N12 SoC.
......@@ -144,9 +144,9 @@ config ARCH_AT91SAM9G45
config ARCH_AT91X40
bool "AT91x40"
depends on !MMU
select ARCH_USES_GETTIMEOFFSET
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select ARCH_USES_GETTIMEOFFSET
endchoice
......
arch/arm/mach-clps711x/Kconfig
浏览文件 @ 1e91adf7
......@@ -23,9 +23,9 @@ config ARCH_CLEP7312
config ARCH_EDB7211
bool "EDB7211"
select ISA
select ARCH_SPARSEMEM_ENABLE
select ARCH_SELECT_MEMORY_MODEL
select ARCH_SPARSEMEM_ENABLE
select ISA
help
Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211
evaluation board.
......
arch/arm/mach-davinci/Kconfig
浏览文件 @ 1e91adf7
......@@ -4,12 +4,12 @@ config AINTC
bool
config CP_INTC
select IRQ_DOMAIN
bool
select IRQ_DOMAIN
config ARCH_DAVINCI_DMx
select CPU_ARM926T
bool
select CPU_ARM926T
menu "TI DaVinci Implementations"
......@@ -32,19 +32,19 @@ config ARCH_DAVINCI_DM646x
config ARCH_DAVINCI_DA830
bool "DA830/OMAP-L137/AM17x based system"
select CP_INTC
select ARCH_DAVINCI_DA8XX
select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
select CP_INTC
config ARCH_DAVINCI_DA850
bool "DA850/OMAP-L138/AM18x based system"
select CP_INTC
select ARCH_DAVINCI_DA8XX
select ARCH_HAS_CPUFREQ
select CP_INTC
config ARCH_DAVINCI_DA8XX
select CPU_ARM926T
bool
select CPU_ARM926T
config ARCH_DAVINCI_DM365
bool "DaVinci 365 based system"
......@@ -52,9 +52,9 @@ config ARCH_DAVINCI_DM365
select ARCH_DAVINCI_DMx
config ARCH_DAVINCI_TNETV107X
bool "TNETV107X based system"
select CPU_V6
select CP_INTC
bool "TNETV107X based system"
comment "DaVinci Board Type"
......@@ -103,9 +103,9 @@ config MACH_DAVINCI_DM6467_EVM
bool "TI DM6467 EVM"
default ARCH_DAVINCI_DM646x
depends on ARCH_DAVINCI_DM646x
select MACH_DAVINCI_DM6467TEVM
select EEPROM_AT24
select I2C
select MACH_DAVINCI_DM6467TEVM
help
Configure this option to specify the whether the board used
for development is a DM6467 EVM
......@@ -127,8 +127,8 @@ config MACH_DAVINCI_DA830_EVM
bool "TI DA830/OMAP-L137/AM17x Reference Platform"
default ARCH_DAVINCI_DA830
depends on ARCH_DAVINCI_DA830
select GPIO_PCF857X
select EEPROM_AT24
select GPIO_PCF857X
select I2C
help
Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
......
arch/arm/mach-exynos/Kconfig
浏览文件 @ 1e91adf7
......@@ -31,11 +31,11 @@ config CPU_EXYNOS4210
bool "SAMSUNG EXYNOS4210"
default y
depends on ARCH_EXYNOS4
select SAMSUNG_DMADEV
select ARM_CPU_SUSPEND if PM
select PM_GENERIC_DOMAINS
select S5P_PM if PM
select S5P_SLEEP if PM
select PM_GENERIC_DOMAINS
select SAMSUNG_DMADEV
help
Enable EXYNOS4210 CPU support
......@@ -43,9 +43,9 @@ config SOC_EXYNOS4212
bool "SAMSUNG EXYNOS4212"
default y
depends on ARCH_EXYNOS4
select SAMSUNG_DMADEV
select S5P_PM if PM
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
help
Enable EXYNOS4212 SoC support
......@@ -61,9 +61,9 @@ config SOC_EXYNOS5250
bool "SAMSUNG EXYNOS5250"
default y
depends on ARCH_EXYNOS5
select SAMSUNG_DMADEV
select S5P_PM if PM
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
help
Enable EXYNOS5250 SoC support
......@@ -189,71 +189,71 @@ config MACH_SMDKC210
config MACH_SMDKV310
bool "SMDKV310"
select CPU_EXYNOS4210
select S5P_DEV_FIMD0
select EXYNOS4_DEV_AHCI
select EXYNOS4_DEV_USB_OHCI
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_KEYPAD
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select EXYNOS_DEV_DMA
select EXYNOS_DEV_DRM
select EXYNOS_DEV_SYSMMU
select S3C24XX_PWM
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select S3C_DEV_I2C1
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_FIMC3
select S5P_DEV_FIMD0
select S5P_DEV_G2D
select S5P_DEV_I2C_HDMIPHY
select S5P_DEV_JPEG
select S5P_DEV_MFC
select S5P_DEV_TV
select S5P_DEV_USB_EHCI
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_USB_HSOTG
select SAMSUNG_DEV_BACKLIGHT
select EXYNOS_DEV_DRM
select EXYNOS_DEV_SYSMMU
select EXYNOS4_DEV_AHCI
select SAMSUNG_DEV_KEYPAD
select EXYNOS_DEV_DMA
select SAMSUNG_DEV_PWM
select EXYNOS4_DEV_USB_OHCI
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_KEYPAD
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select S3C24XX_PWM
help
Machine support for Samsung SMDKV310
config MACH_ARMLEX4210
bool "ARMLEX4210"
select CPU_EXYNOS4210
select S3C_DEV_RTC
select S3C_DEV_WDT
select EXYNOS4_DEV_AHCI
select EXYNOS4_SETUP_SDHCI
select EXYNOS_DEV_DMA
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select EXYNOS4_DEV_AHCI
select EXYNOS_DEV_DMA
select EXYNOS4_SETUP_SDHCI
select S3C_DEV_RTC
select S3C_DEV_WDT
help
Machine support for Samsung ARMLEX4210 based on EXYNOS4210
config MACH_UNIVERSAL_C210
bool "Mobile UNIVERSAL_C210 Board"
select CPU_EXYNOS4210
select S5P_HRT
select CLKSRC_MMIO
select CPU_EXYNOS4210
select EXYNOS4_SETUP_FIMC
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select EXYNOS_DEV_DMA
select EXYNOS_DEV_DRM
select EXYNOS_DEV_SYSMMU
select HAVE_SCHED_CLOCK
select S5P_GPIO_INT
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_FIMC3
select S5P_DEV_G2D
select S5P_DEV_CSIS0
select S5P_DEV_JPEG
select S5P_DEV_FIMD0
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
......@@ -261,21 +261,21 @@ config MACH_UNIVERSAL_C210
select S3C_DEV_I2C3
select S3C_DEV_I2C5
select S3C_DEV_USB_HSOTG
select S5P_DEV_CSIS0
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_FIMC3
select S5P_DEV_FIMD0
select S5P_DEV_G2D
select S5P_DEV_I2C_HDMIPHY
select S5P_DEV_JPEG
select S5P_DEV_MFC
select S5P_DEV_ONENAND
select S5P_DEV_TV
select EXYNOS_DEV_SYSMMU
select EXYNOS_DEV_DMA
select EXYNOS_DEV_DRM
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_FIMC
select S5P_GPIO_INT
select S5P_HRT
select S5P_SETUP_MIPIPHY
select EXYNOS4_SETUP_USB_PHY
help
Machine support for Samsung Mobile Universal S5PC210 Reference
Board.
......@@ -283,10 +283,16 @@ config MACH_UNIVERSAL_C210
config MACH_NURI
bool "Mobile NURI Board"
select CPU_EXYNOS4210
select S5P_GPIO_INT
select S3C_DEV_WDT
select S3C_DEV_RTC
select S5P_DEV_FIMD0
select EXYNOS4_SETUP_FIMC
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_I2C6
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select EXYNOS_DEV_DMA
select EXYNOS_DEV_DRM
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
......@@ -294,41 +300,42 @@ config MACH_NURI
select S3C_DEV_I2C3
select S3C_DEV_I2C5
select S3C_DEV_I2C6
select S3C_DEV_RTC
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select S5P_DEV_CSIS0
select S5P_DEV_JPEG
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_FIMC3
select S5P_DEV_FIMD0
select S5P_DEV_G2D
select S5P_DEV_JPEG
select S5P_DEV_MFC
select S5P_DEV_USB_EHCI
select S5P_GPIO_INT
select S5P_SETUP_MIPIPHY
select EXYNOS_DEV_DMA
select EXYNOS_DEV_DRM
select EXYNOS4_SETUP_FIMC
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_I2C6
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select S5P_SETUP_MIPIPHY
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_PWM
help
Machine support for Samsung Mobile NURI Board.
config MACH_ORIGEN
bool "ORIGEN"
select CPU_EXYNOS4210
select S3C_DEV_RTC
select S3C_DEV_WDT
select EXYNOS4_DEV_USB_OHCI
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select EXYNOS_DEV_DMA
select EXYNOS_DEV_DRM
select EXYNOS_DEV_SYSMMU
select S3C24XX_PWM
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_RTC
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
......@@ -342,14 +349,6 @@ config MACH_ORIGEN
select S5P_DEV_USB_EHCI
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_PWM
select EXYNOS_DEV_DRM
select EXYNOS_DEV_SYSMMU
select EXYNOS_DEV_DMA
select EXYNOS4_DEV_USB_OHCI
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select S3C24XX_PWM
help
Machine support for ORIGEN based on Samsung EXYNOS4210
......@@ -357,7 +356,17 @@ comment "EXYNOS4212 Boards"
config MACH_SMDK4212
bool "SMDK4212"
select SOC_EXYNOS4212
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C7
select EXYNOS4_SETUP_KEYPAD
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select EXYNOS_DEV_DMA
select EXYNOS_DEV_DRM
select EXYNOS_DEV_SYSMMU
select S3C24XX_PWM
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_I2C1
......@@ -375,17 +384,7 @@ config MACH_SMDK4212
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
select EXYNOS_DEV_SYSMMU
select EXYNOS_DEV_DMA
select EXYNOS_DEV_DRM
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C7
select EXYNOS4_SETUP_KEYPAD
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select S3C24XX_PWM
select SOC_EXYNOS4212
help
Machine support for Samsung SMDK4212
......@@ -393,8 +392,8 @@ comment "EXYNOS4412 Boards"
config MACH_SMDK4412
bool "SMDK4412"
select SOC_EXYNOS4412
select MACH_SMDK4212
select SOC_EXYNOS4412
help
Machine support for Samsung SMDK4412
endif
......@@ -404,12 +403,12 @@ comment "Flattened Device Tree based board for EXYNOS SoCs"
config MACH_EXYNOS4_DT
bool "Samsung Exynos4 Machine using device tree"
depends on ARCH_EXYNOS4
select CPU_EXYNOS4210
select USE_OF
select ARM_AMBA
select CPU_EXYNOS4210
select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
select PINCTRL
select PINCTRL_EXYNOS4
select USE_OF
help
Machine support for Samsung Exynos4 machine with device tree enabled.
Select this if a fdt blob is available for the Exynos4 SoC based board.
......@@ -419,9 +418,9 @@ config MACH_EXYNOS4_DT
config MACH_EXYNOS5_DT
bool "SAMSUNG EXYNOS5 Machine using device tree"
depends on ARCH_EXYNOS5
select ARM_AMBA
select SOC_EXYNOS5250
select USE_OF
select ARM_AMBA
help
Machine support for Samsung EXYNOS5 machine with device tree enabled.
Select this if a fdt blob is available for the EXYNOS5 SoC based board.
......
arch/arm/mach-footbridge/Kconfig
浏览文件 @ 1e91adf7
......@@ -91,7 +91,7 @@ config FOOTBRIDGE_ADDIN
# EBSA285 board in either host or addin mode
config ARCH_EBSA285
select ARCH_MAY_HAVE_PC_FDC
bool
select ARCH_MAY_HAVE_PC_FDC
endif
arch/arm/mach-h720x/Kconfig
浏览文件 @ 1e91adf7
......@@ -12,9 +12,9 @@ config ARCH_H7201
config ARCH_H7202
bool "hms30c7202"
depends on ARCH_H720X
select CPU_H7202
select ZONE_DMA
depends on ARCH_H720X
help
Say Y here if you are using the Hynix HMS30C7202 Reference Board
......
arch/arm/mach-imx/Kconfig
浏览文件 @ 1e91adf7
......@@ -41,68 +41,68 @@ config SOC_IMX1
config SOC_IMX21
bool
select MACH_MX21
select CPU_ARM926T
select COMMON_CLK
select CPU_ARM926T
select IMX_HAVE_IOMUX_V1
select MACH_MX21
select MXC_AVIC
config SOC_IMX25
bool
select ARCH_MX25
select ARCH_MXC_IOMUX_V3
select COMMON_CLK
select CPU_ARM926T
select HAVE_CAN_FLEXCAN if CAN
select ARCH_MXC_IOMUX_V3
select MXC_AVIC
config SOC_IMX27
bool
select MACH_MX27
select CPU_ARM926T
select COMMON_CLK
select CPU_ARM926T
select IMX_HAVE_IOMUX_V1
select MACH_MX27
select MXC_AVIC
config SOC_IMX31
bool
select COMMON_CLK
select CPU_V6
select IMX_HAVE_PLATFORM_MXC_RNGA
select MXC_AVIC
select COMMON_CLK
select SMP_ON_UP if SMP
config SOC_IMX35
bool
select CPU_V6K
select ARCH_MXC_IOMUX_V3
select COMMON_CLK
select CPU_V6K
select HAVE_CAN_FLEXCAN if CAN
select HAVE_EPIT
select MXC_AVIC
select SMP_ON_UP if SMP
select HAVE_CAN_FLEXCAN if CAN
config SOC_IMX5
select CPU_V7
select MXC_TZIC
select COMMON_CLK
select ARCH_MXC_IOMUX_V3
bool
select ARCH_HAS_CPUFREQ
select ARCH_MX5
bool
select ARCH_MXC_IOMUX_V3
select COMMON_CLK
select CPU_V7
select MXC_TZIC
config SOC_IMX50
bool
select SOC_IMX5
select ARCH_MX50
select SOC_IMX5
config SOC_IMX51
bool
select SOC_IMX5
select ARCH_MX5
select ARCH_MX51
select PINCTRL
select PINCTRL_IMX51
select SOC_IMX5
if ARCH_IMX_V4_V5
......@@ -112,10 +112,10 @@ config MACH_MXLADS
config ARCH_MX1ADS
bool "MX1ADS platform"
select MACH_MXLADS
select SOC_IMX1
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select MACH_MXLADS
select SOC_IMX1
help
Say Y here if you are using Motorola MX1ADS/MXLADS boards
......@@ -127,9 +127,9 @@ config MACH_SCB9328
config MACH_APF9328
bool "APF9328"
select SOC_IMX1
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select SOC_IMX1
help
Say Yes here if you are using the Armadeus APF9328 development board
......@@ -137,11 +137,11 @@ comment "MX21 platforms:"
config MACH_MX21ADS
bool "MX21ADS platform"
select SOC_IMX21
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select SOC_IMX21
help
Include support for MX21ADS platform. This includes specific
configurations for the board and its peripherals.
......@@ -150,22 +150,21 @@ comment "MX25 platforms:"
config MACH_MX25_3DS
bool "Support MX25PDK (3DS) Platform"
select SOC_IMX25
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMXDI_RTC
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select SOC_IMX25
config MACH_EUKREA_CPUIMX25SD
bool "Support Eukrea CPUIMX25 Platform"
select SOC_IMX25
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
......@@ -177,6 +176,7 @@ config MACH_EUKREA_CPUIMX25SD
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select MXC_ULPI if USB_ULPI
select SOC_IMX25
choice
prompt "Baseboard"
......@@ -199,20 +199,19 @@ comment "MX27 platforms:"
config MACH_MX27ADS
bool "MX27ADS platform"
select SOC_IMX27
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
select SOC_IMX27
help
Include support for MX27ADS platform. This includes specific
configurations for the board and its peripherals.
config MACH_PCM038
bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
select SOC_IMX27
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
......@@ -221,6 +220,7 @@ config MACH_PCM038
select IMX_HAVE_PLATFORM_MXC_W1
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
select SOC_IMX27
help
Include support for phyCORE-i.MX27 (aka pcm038) platform. This
includes specific configurations for the module and its peripherals.
......@@ -242,7 +242,6 @@ endchoice
config MACH_CPUIMX27
bool "Eukrea CPUIMX27 module"
select SOC_IMX27
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
......@@ -251,6 +250,7 @@ config MACH_CPUIMX27
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
select MXC_ULPI if USB_ULPI
select SOC_IMX27
help
Include support for Eukrea CPUIMX27 platform. This includes
specific configurations for the module and its peripherals.
......@@ -292,7 +292,6 @@ endchoice
config MACH_MX27_3DS
bool "MX27PDK platform"
select SOC_IMX27
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_FB
......@@ -306,13 +305,13 @@ config MACH_MX27_3DS
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_DEBUG_BOARD
select MXC_ULPI if USB_ULPI
select SOC_IMX27
help
Include support for MX27PDK platform. This includes specific
configurations for the board and its peripherals.
config MACH_IMX27_VISSTRIM_M10
bool "Vista Silicon i.MX27 Visstrim_m10"
select SOC_IMX27
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
......@@ -321,6 +320,7 @@ config MACH_IMX27_VISSTRIM_M10
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select LEDS_GPIO_REGISTER
select SOC_IMX27
help
Include support for Visstrim_m10 platform and its different variants.
This includes specific configurations for the board and its
......@@ -328,16 +328,15 @@ config MACH_IMX27_VISSTRIM_M10
config MACH_IMX27LITE
bool "LogicPD MX27 LITEKIT platform"
select SOC_IMX27
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select SOC_IMX27
help
Include support for MX27 LITEKIT platform. This includes specific
configurations for the board and its peripherals.
config MACH_PCA100
bool "Phytec phyCARD-s (pca100)"
select SOC_IMX27
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_FB
......@@ -350,27 +349,28 @@ config MACH_PCA100
select IMX_HAVE_PLATFORM_MXC_W1
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
select SOC_IMX27
help
Include support for phyCARD-s (aka pca100) platform. This
includes specific configurations for the module and its peripherals.
config MACH_MXT_TD60
bool "Maxtrack i-MXT TD60"
select SOC_IMX27
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select SOC_IMX27
help
Include support for i-MXT (aka td60) platform. This
includes specific configurations for the module and its peripherals.
config MACH_IMX27IPCAM
bool "IMX27 IPCAM platform"
select SOC_IMX27
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_UART
select SOC_IMX27
help
Include support for IMX27 IPCAM platform. This includes specific
configurations for the board and its peripherals.
......@@ -390,11 +390,11 @@ comment "MX31 platforms:"
config MACH_MX31ADS
bool "Support MX31ADS platforms"
select SOC_IMX31
default y
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
default y
select SOC_IMX31
help
Include support for MX31ADS platform. This includes specific
configurations for the board and its peripherals.
......@@ -412,21 +412,19 @@ config MACH_MX31ADS_WM1133_EV1
config MACH_MX31LILLY
bool "Support MX31 LILLY-1131 platforms (INCO startec)"
select SOC_IMX31
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
select SOC_IMX31
help
Include support for mx31 based LILLY1131 modules. This includes
specific configurations for the board and its peripherals.
config MACH_MX31LITE
bool "Support MX31 LITEKIT (LogicPD)"
select SOC_IMX31
select MXC_ULPI if USB_ULPI
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
......@@ -435,13 +433,14 @@ config MACH_MX31LITE
select IMX_HAVE_PLATFORM_MXC_RTC
select IMX_HAVE_PLATFORM_SPI_IMX
select LEDS_GPIO_REGISTER
select MXC_ULPI if USB_ULPI
select SOC_IMX31
help
Include support for MX31 LITEKIT platform. This includes specific
configurations for the board and its peripherals.
config MACH_PCM037
bool "Support Phytec pcm037 (i.MX31) platforms"
select SOC_IMX31
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
......@@ -452,6 +451,7 @@ config MACH_PCM037
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
select MXC_ULPI if USB_ULPI
select SOC_IMX31
help
Include support for Phytec pcm037 platform. This includes
specific configurations for the board and its peripherals.
......@@ -468,8 +468,6 @@ config MACH_PCM037_EET
config MACH_MX31_3DS
bool "Support MX31PDK (3DS)"
select SOC_IMX31
select MXC_DEBUG_BOARD
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
......@@ -481,7 +479,9 @@ config MACH_MX31_3DS
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_DEBUG_BOARD
select MXC_ULPI if USB_ULPI
select SOC_IMX31
help
Include support for MX31PDK (3DS) platform. This includes specific
configurations for the board and its peripherals.
......@@ -497,7 +497,6 @@ config MACH_MX31_3DS_MXC_NAND_USE_BBT
config MACH_MX31MOBOARD
bool "Support mx31moboard platforms (EPFL Mobots group)"
select SOC_IMX31
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
......@@ -509,22 +508,22 @@ config MACH_MX31MOBOARD
select IMX_HAVE_PLATFORM_SPI_IMX
select LEDS_GPIO_REGISTER
select MXC_ULPI if USB_ULPI
select SOC_IMX31
help
Include support for mx31moboard platform. This includes specific
configurations for the board and its peripherals.
config MACH_QONG
bool "Support Dave/DENX QongEVB-LITE platform"
select SOC_IMX31
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_UART
select SOC_IMX31
help
Include support for Dave/DENX QongEVB-LITE platform. This includes
specific configurations for the board and its peripherals.
config MACH_ARMADILLO5X0
bool "Support Atmark Armadillo-500 Development Base Board"
select SOC_IMX31
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
......@@ -533,23 +532,24 @@ config MACH_ARMADILLO5X0
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select MXC_ULPI if USB_ULPI
select SOC_IMX31
help
Include support for Atmark Armadillo-500 platform. This includes
specific configurations for the board and its peripherals.
config MACH_KZM_ARM11_01
bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
select SOC_IMX31
select IMX_HAVE_PLATFORM_IMX_UART
select SOC_IMX31
help
Include support for KZM-ARM11-01. This includes specific
configurations for the board and its peripherals.
config MACH_BUG
bool "Support Buglabs BUGBase platform"
select SOC_IMX31
select IMX_HAVE_PLATFORM_IMX_UART
default y
select IMX_HAVE_PLATFORM_IMX_UART
select SOC_IMX31
help
Include support for BUGBase 1.3 platform. This includes specific
configurations for the board and its peripherals.
......@@ -565,7 +565,6 @@ comment "MX35 platforms:"
config MACH_PCM043
bool "Support Phytec pcm043 (i.MX35) platforms"
select SOC_IMX35
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
......@@ -577,14 +576,13 @@ config MACH_PCM043
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select MXC_ULPI if USB_ULPI
select SOC_IMX35
help
Include support for Phytec pcm043 platform. This includes
specific configurations for the board and its peripherals.
config MACH_MX35_3DS
bool "Support MX35PDK platform"
select SOC_IMX35
select MXC_DEBUG_BOARD
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_FB
......@@ -595,13 +593,14 @@ config MACH_MX35_3DS
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_RTC
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select MXC_DEBUG_BOARD
select SOC_IMX35
help
Include support for MX35PDK platform. This includes specific
configurations for the board and its peripherals.
config MACH_EUKREA_CPUIMX35SD
bool "Support Eukrea CPUIMX35 Platform"
select SOC_IMX35
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
......@@ -611,6 +610,7 @@ config MACH_EUKREA_CPUIMX35SD
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select MXC_ULPI if USB_ULPI
select SOC_IMX35
help
Include support for Eukrea CPUIMX35 platform. This includes
specific configurations for the board and its peripherals.
......@@ -635,16 +635,16 @@ endchoice
config MACH_VPR200
bool "Support VPR200 platform"
select SOC_IMX35
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select SOC_IMX35
help
Include support for VPR200 platform. This includes specific
configurations for the board and its peripherals.
......@@ -654,11 +654,11 @@ comment "i.MX5 platforms:"
config MACH_MX50_RDP
bool "Support MX50 reference design platform"
depends on BROKEN
select SOC_IMX50
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
select SOC_IMX50
help
Include support for MX50 reference design platform (RDP) board. This
includes specific configurations for the board and its peripherals.
......@@ -667,15 +667,14 @@ comment "i.MX51 machines:"
config MACH_IMX51_DT
bool "Support i.MX51 platforms from device tree"
select SOC_IMX51
select MACH_MX51_BABBAGE
select SOC_IMX51
help
Include support for Freescale i.MX51 based platforms
using the device tree for discovery
config MACH_MX51_BABBAGE
bool "Support MX51 BABBAGE platforms"
select SOC_IMX51
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
......@@ -683,6 +682,7 @@ config MACH_MX51_BABBAGE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
select SOC_IMX51
help
Include support for MX51 Babbage platform, also known as MX51EVK in
u-boot. This includes specific configurations for the board and its
......@@ -690,27 +690,27 @@ config MACH_MX51_BABBAGE
config MACH_MX51_3DS
bool "Support MX51PDK (3DS)"
select SOC_IMX51
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_DEBUG_BOARD
select SOC_IMX51
help
Include support for MX51PDK (3DS) platform. This includes specific
configurations for the board and its peripherals.
config MACH_EUKREA_CPUIMX51SD
bool "Support Eukrea CPUIMX51SD module"
select SOC_IMX51
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
select SOC_IMX51
help
Include support for Eukrea CPUIMX51SD platform. This includes
specific configurations for the module and its peripherals.
......@@ -736,12 +736,12 @@ comment "Device tree only"
config SOC_IMX53
bool "i.MX53 support"
select SOC_IMX5
select ARCH_MX5
select ARCH_MX53
select HAVE_CAN_FLEXCAN if CAN
select PINCTRL
select PINCTRL_IMX53
select SOC_IMX5
help
This enables support for Freescale i.MX53 processor.
......
arch/arm/mach-ixp4xx/Kconfig
浏览文件 @ 1e91adf7
......@@ -234,8 +234,8 @@ config IXP4XX_QMGR
config IXP4XX_NPE
tristate "IXP4xx Network Processor Engine support"
select HOTPLUG
select FW_LOADER
select HOTPLUG
help
This driver supports IXP4xx built-in network coprocessors
and is automatically selected by Ethernet and HSS drivers.
......
arch/arm/mach-mmp/Kconfig
浏览文件 @ 1e91adf7
......@@ -107,22 +107,22 @@ endmenu
config CPU_PXA168
bool
select CPU_MOHAWK
select COMMON_CLK
select CPU_MOHAWK
help
Select code specific to PXA168
config CPU_PXA910
bool
select CPU_MOHAWK
select COMMON_CLK
select CPU_MOHAWK
help
Select code specific to PXA910
config CPU_MMP2
bool
select CPU_PJ4
select COMMON_CLK
select CPU_PJ4
help
Select code specific to MMP2. MMP2 is ARMv7 compatible.
......
arch/arm/mach-msm/Kconfig
浏览文件 @ 1e91adf7
......@@ -10,35 +10,35 @@ choice
config ARCH_MSM7X00A
bool "MSM7x00A / MSM7x01A"
select MACH_TROUT if !MACH_HALIBUT
select ARCH_MSM_ARM11
select MSM_SMD
select MSM_SMD_PKG3
select CPU_V6
select GPIO_MSM_V1
select MACH_TROUT if !MACH_HALIBUT
select MSM_PROC_COMM
select MSM_SMD
select MSM_SMD_PKG3
config ARCH_MSM7X30
bool "MSM7x30"
select MACH_MSM7X30_SURF # if !
select ARCH_MSM_SCORPION
select MSM_SMD
select MSM_VIC
select CPU_V7
select MSM_GPIOMUX
select GPIO_MSM_V1
select MACH_MSM7X30_SURF # if !
select MSM_GPIOMUX
select MSM_PROC_COMM
select MSM_SMD
select MSM_VIC
config ARCH_QSD8X50
bool "QSD8X50"
select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5
select ARCH_MSM_SCORPION
select MSM_SMD
select MSM_VIC
select CPU_V7
select MSM_GPIOMUX
select GPIO_MSM_V1
select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5
select MSM_GPIOMUX
select MSM_PROC_COMM
select MSM_SMD
select MSM_VIC
endchoice
......@@ -47,10 +47,10 @@ config ARCH_MSM8X60
select ARCH_MSM_SCORPIONMP
select ARM_GIC
select CPU_V7
select MSM_V2_TLMM
select GPIO_MSM_V2
select MSM_GPIOMUX
select MSM_SCM if SMP
select MSM_V2_TLMM
select USE_OF
config ARCH_MSM8960
......@@ -58,9 +58,9 @@ config ARCH_MSM8960
select ARCH_MSM_SCORPIONMP
select ARM_GIC
select CPU_V7
select MSM_V2_TLMM
select MSM_GPIOMUX
select MSM_SCM if SMP
select MSM_V2_TLMM
select USE_OF
config MSM_HAS_DEBUG_UART_HS
......@@ -110,8 +110,8 @@ config MACH_QSD8X50_SURF
config MACH_QSD8X50A_ST1_5
depends on ARCH_QSD8X50
select MSM_SOC_REV_A
bool "QSD8x50A ST1.5"
select MSM_SOC_REV_A
help
Support for the Qualcomm ST1.5.
......
arch/arm/mach-nomadik/Kconfig
浏览文件 @ 1e91adf7
......@@ -4,8 +4,8 @@ menu "Nomadik boards"
config MACH_NOMADIK_8815NHK
bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
select NOMADIK_8815
select HAS_MTU
select NOMADIK_8815
endmenu
......@@ -16,7 +16,7 @@ config I2C_BITBANG_8815NHK
tristate "Driver for bit-bang busses found on the 8815 NHK"
depends on I2C && MACH_NOMADIK_8815NHK
depends on PINCTRL_NOMADIK
select I2C_ALGOBIT
default y
select I2C_ALGOBIT
endif
arch/arm/mach-omap1/Kconfig
浏览文件 @ 1e91adf7
......@@ -8,15 +8,15 @@ comment "OMAP Core Type"
config ARCH_OMAP730
depends on ARCH_OMAP1
bool "OMAP730 Based System"
select ARCH_OMAP_OTG
select CPU_ARM926T
select OMAP_MPU_TIMER
select ARCH_OMAP_OTG
config ARCH_OMAP850
depends on ARCH_OMAP1
bool "OMAP850 Based System"
select CPU_ARM926T
select ARCH_OMAP_OTG
select CPU_ARM926T
config ARCH_OMAP15XX
depends on ARCH_OMAP1
......@@ -28,8 +28,8 @@ config ARCH_OMAP15XX
config ARCH_OMAP16XX
depends on ARCH_OMAP1
bool "OMAP16xx Based System"
select CPU_ARM926T
select ARCH_OMAP_OTG
select CPU_ARM926T
comment "OMAP Board Type"
depends on ARCH_OMAP1
......@@ -132,8 +132,8 @@ config MACH_OMAP_PALMTT
config MACH_SX1
bool "Siemens SX1"
select I2C
depends on ARCH_OMAP1 && ARCH_OMAP15XX
select I2C
help
Support for the Siemens SX1 phone. To boot the kernel,
you'll need a SX1 compatible bootloader; check out
......
arch/arm/mach-omap2/Kconfig
浏览文件 @ 1e91adf7
......@@ -6,19 +6,19 @@ config ARCH_OMAP2PLUS_TYPICAL
bool "Typical OMAP configuration"
default y
select AEABI
select REGULATOR
select PM_RUNTIME
select VFP
select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
select SERIAL_OMAP
select SERIAL_OMAP_CONSOLE
select HIGHMEM
select I2C
select I2C_OMAP
select MENELAUS if ARCH_OMAP2
select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
select PINCTRL
select PM_RUNTIME
select REGULATOR
select SERIAL_OMAP
select SERIAL_OMAP_CONSOLE
select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
select HIGHMEM
select PINCTRL
select VFP
help
Compile a kernel suitable for booting most boards
......@@ -40,44 +40,44 @@ config ARCH_OMAP3
bool "TI OMAP3"
depends on ARCH_OMAP2PLUS
default y
select CPU_V7
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select ARCH_HAS_OPP
select PM_RUNTIME if CPU_IDLE
select PM_OPP if PM
select ARM_CPU_SUSPEND if PM
select CPU_V7
select MULTI_IRQ_HANDLER
select SOC_HAS_OMAP2_SDRC
select OMAP_INTERCONNECT
select PM_OPP if PM
select PM_RUNTIME if CPU_IDLE
select SOC_HAS_OMAP2_SDRC
select USB_ARCH_HAS_EHCI if USB_SUPPORT
config ARCH_OMAP4
bool "TI OMAP4"
default y
depends on ARCH_OMAP2PLUS
select ARCH_HAS_OPP
select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
select ARM_CPU_SUSPEND if PM
select ARM_ERRATA_720789
select ARM_GIC
select CACHE_L2X0
select CPU_V7
select ARM_GIC
select HAVE_SMP
select LOCAL_TIMERS if SMP
select OMAP_INTERCONNECT
select PL310_ERRATA_588369
select PL310_ERRATA_727915
select ARM_ERRATA_720789
select ARCH_HAS_OPP
select PM_RUNTIME if CPU_IDLE
select PM_OPP if PM
select PM_RUNTIME if CPU_IDLE
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select ARM_CPU_SUSPEND if PM
select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
select OMAP_INTERCONNECT
config SOC_OMAP5
bool "TI OMAP5"
select CPU_V7
select ARM_ARCH_TIMER
select ARM_CPU_SUSPEND if PM
select ARM_GIC
select CPU_V7
select HAVE_SMP
select ARM_CPU_SUSPEND if PM
select SOC_HAS_REALTIME_COUNTER
select ARM_ARCH_TIMER
comment "OMAP Core Type"
depends on ARCH_OMAP2
......@@ -109,8 +109,8 @@ config SOC_TI81XX
config SOC_AM33XX
bool "AM33XX support"
default y
select CPU_V7
select ARM_CPU_SUSPEND if PM
select CPU_V7
select MULTI_IRQ_HANDLER
config OMAP_PACKAGE_ZAF
......@@ -157,8 +157,8 @@ config MACH_OMAP_H4
bool "OMAP 2420 H4 board"
depends on SOC_OMAP2420
default y
select OMAP_PACKAGE_ZAF
select OMAP_DEBUG_DEVICES
select OMAP_PACKAGE_ZAF
config MACH_OMAP_APOLLON
bool "OMAP 2420 Apollon board"
......@@ -193,8 +193,8 @@ config MACH_OMAP_LDP
config MACH_OMAP3530_LV_SOM
bool "OMAP3 Logic 3530 LV SOM board"
depends on ARCH_OMAP3
select OMAP_PACKAGE_CBB
default y
select OMAP_PACKAGE_CBB
help
Support for the LogicPD OMAP3530 SOM Development kit
for full description please see the products webpage at
......@@ -203,8 +203,8 @@ config MACH_OMAP3530_LV_SOM
config MACH_OMAP3_TORPEDO
bool "OMAP3 Logic 35x Torpedo board"
depends on ARCH_OMAP3
select OMAP_PACKAGE_CBB
default y
select OMAP_PACKAGE_CBB
help
Support for the LogicPD OMAP35x Torpedo Development kit
for full description please see the products webpage at
......@@ -265,17 +265,17 @@ config MACH_NOKIA_N8X0
bool "Nokia N800/N810"
depends on SOC_OMAP2420
default y
select OMAP_PACKAGE_ZAC
select MACH_NOKIA_N800
select MACH_NOKIA_N810
select MACH_NOKIA_N810_WIMAX
select OMAP_PACKAGE_ZAC
config MACH_NOKIA_RM680
bool "Nokia RM-680/696 board"
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBB
select MACH_NOKIA_RM696
select OMAP_PACKAGE_CBB
config MACH_NOKIA_RX51
bool "Nokia RX-51 board"
......@@ -288,20 +288,20 @@ config MACH_OMAP_ZOOM2
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SERIAL_8250
select SERIAL_CORE_CONSOLE
select SERIAL_8250_CONSOLE
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SERIAL_CORE_CONSOLE
config MACH_OMAP_ZOOM3
bool "OMAP3630 Zoom3 board"
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBP
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SERIAL_8250
select SERIAL_CORE_CONSOLE
select SERIAL_8250_CONSOLE
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SERIAL_CORE_CONSOLE
config MACH_CM_T35
bool "CompuLab CM-T35/CM-T3730 modules"
......@@ -329,8 +329,8 @@ config MACH_IGEP0030
bool "IGEP OMAP3 module"
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBB
select MACH_IGEP0020
select OMAP_PACKAGE_CBB
config MACH_SBC3530
bool "OMAP3 SBC STALKER board"
......
arch/arm/mach-prima2/Kconfig
浏览文件 @ 1e91adf7
......@@ -6,8 +6,8 @@ config ARCH_PRIMA2
bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
default y
select CPU_V7
select ZONE_DMA
select SIRF_IRQ
select ZONE_DMA
help
Support for CSR SiRFSoC ARM Cortex A9 Platform
......
arch/arm/mach-pxa/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/arm/mach-realview/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/arm/mach-s3c2412/Kconfig
浏览文件 @ 1e91adf7
......@@ -7,7 +7,7 @@
config S3C2412_CPUFREQ
bool
depends on CPU_FREQ_S3C24XX && CPU_S3C2412
select S3C2412_IOTIMING
default y
select S3C2412_IOTIMING
help
CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
arch/arm/mach-s3c2440/Kconfig
浏览文件 @ 1e91adf7
......@@ -5,8 +5,8 @@
config S3C2440_CPUFREQ
bool "S3C2440/S3C2442 CPU Frequency scaling support"
depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
select S3C2410_CPUFREQ_UTILS
default y
select S3C2410_CPUFREQ_UTILS
help
CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
......
arch/arm/mach-s3c24xx/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/arm/mach-s3c64xx/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/arm/mach-s5p64x0/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/arm/mach-s5pc100/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/arm/mach-s5pv210/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/arm/mach-sa1100/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/arm/mach-shmobile/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/arm/mach-tegra/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/arm/mach-u300/Kconfig
浏览文件 @ 1e91adf7
......@@ -7,8 +7,8 @@ comment "ST-Ericsson Mobile Platform Products"
config MACH_U300
bool "U300"
select PINCTRL
select PINCTRL_U300
select PINCTRL_COH901
select PINCTRL_U300
comment "ST-Ericsson U300/U335 Feature Selections"
......
arch/arm/mach-ux500/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/arm/mach-versatile/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/arm/mm/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/arm/plat-mxc/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/arm/plat-mxc/devices/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/arm/plat-nomadik/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/arm/plat-omap/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/arm/plat-s3c24xx/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/arm/plat-samsung/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/arm/plat-spear/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/avr32/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/avr32/include/asm/module.h
浏览文件 @ 1e91adf7
此差异已折叠。
arch/blackfin/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/blackfin/include/asm/module.h
浏览文件 @ 1e91adf7
此差异已折叠。
arch/c6x/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/c6x/include/asm/module.h
浏览文件 @ 1e91adf7
此差异已折叠。
arch/cris/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/cris/include/asm/Kbuild
浏览文件 @ 1e91adf7
......@@ -10,3 +10,4 @@ header-y += sync_serial.h
generic-y += clkdev.h
generic-y += exec.h
generic-y += module.h
arch/cris/include/asm/module.h 已删除 100644 → 0
浏览文件 @ d40ce170
此差异已折叠。
arch/frv/include/asm/module.h
浏览文件 @ 1e91adf7
此差异已折叠。
arch/h8300/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/h8300/include/asm/Kbuild
浏览文件 @ 1e91adf7
此差异已折叠。
arch/h8300/include/asm/module.h 已删除 100644 → 0
浏览文件 @ d40ce170
此差异已折叠。
arch/hexagon/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/ia64/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/ia64/include/asm/module.h
浏览文件 @ 1e91adf7
此差异已折叠。
arch/m32r/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/m32r/include/asm/Kbuild
浏览文件 @ 1e91adf7
此差异已折叠。
arch/m32r/include/asm/module.h 已删除 100644 → 0
浏览文件 @ d40ce170
此差异已折叠。
arch/m32r/kernel/module.c
浏览文件 @ 1e91adf7
此差异已折叠。
arch/m68k/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/m68k/include/asm/module.h
浏览文件 @ 1e91adf7
此差异已折叠。
arch/microblaze/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/alchemy/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/alchemy/Platform
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/alchemy/devboards/db1235.c 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/alchemy/devboards/pb1100.c 已删除 100644 → 0
浏览文件 @ d40ce170
此差异已折叠。
arch/mips/alchemy/devboards/pb1500.c 已删除 100644 → 0
浏览文件 @ d40ce170
此差异已折叠。
arch/mips/alchemy/devboards/pb1550.c 已删除 100644 → 0
浏览文件 @ d40ce170
此差异已折叠。
arch/mips/configs/db1200_defconfig 已删除 100644 → 0
浏览文件 @ d40ce170
此差异已折叠。
arch/mips/configs/db1235_defconfig 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/configs/db1300_defconfig 已删除 100644 → 0
浏览文件 @ d40ce170
此差异已折叠。
arch/mips/configs/db1550_defconfig 已删除 100644 → 0
浏览文件 @ d40ce170
此差异已折叠。
arch/mips/configs/pb1100_defconfig 已删除 100644 → 0
浏览文件 @ d40ce170
此差异已折叠。
arch/mips/configs/pb1500_defconfig 已删除 100644 → 0
浏览文件 @ d40ce170
此差异已折叠。
arch/mips/configs/pb1550_defconfig 已删除 100644 → 0
浏览文件 @ d40ce170
此差异已折叠。
arch/mips/include/asm/Kbuild
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/include/asm/atomic.h
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/include/asm/cpu.h
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/include/asm/errno.h
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/include/asm/kspd.h
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/include/asm/mipsregs.h
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/include/asm/module.h
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/include/asm/pgtable-64.h
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/include/asm/ptrace.h
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/include/asm/setup.h
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/include/asm/sigcontext.h
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/include/asm/siginfo.h
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/include/asm/signal.h
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/include/asm/socket.h
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/include/asm/termios.h
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/include/asm/types.h
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/include/asm/unistd.h
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/include/uapi/asm/Kbuild
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/include/uapi/asm/errno.h 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/include/uapi/asm/ptrace.h 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/include/uapi/asm/setup.h 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/include/uapi/asm/sigcontext.h 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/include/uapi/asm/siginfo.h 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/include/uapi/asm/signal.h 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/include/uapi/asm/socket.h 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/include/uapi/asm/termios.h 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/include/uapi/asm/types.h 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/include/uapi/asm/unistd.h 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/kernel/Makefile
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/kernel/asm-offsets.c
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/kernel/cpu-probe.c
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/kernel/kspd.c 已删除 100644 → 0
浏览文件 @ d40ce170
此差异已折叠。
arch/mips/kernel/module-rela.c 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/kernel/module.c
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/kernel/proc.c
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/kernel/vmlinux.lds.S
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/kernel/vpe.c
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/mm/init.c
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/mm/pgtable-64.c
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/mm/tlbex.c
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/pci/fixup-malta.c
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mips/sni/a20r.c
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mn10300/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/mn10300/include/asm/module.h
浏览文件 @ 1e91adf7
此差异已折叠。
arch/openrisc/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/parisc/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/parisc/include/asm/module.h
浏览文件 @ 1e91adf7
此差异已折叠。
arch/powerpc/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/powerpc/include/asm/module.h
浏览文件 @ 1e91adf7
此差异已折叠。
arch/s390/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/s390/include/asm/module.h
浏览文件 @ 1e91adf7
此差异已折叠。
arch/score/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/score/include/asm/module.h
浏览文件 @ 1e91adf7
此差异已折叠。
arch/score/kernel/module.c
浏览文件 @ 1e91adf7
此差异已折叠。
arch/sh/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/sh/include/asm/module.h
浏览文件 @ 1e91adf7
此差异已折叠。
arch/sparc/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/sparc/include/asm/Kbuild
浏览文件 @ 1e91adf7
此差异已折叠。
arch/sparc/include/asm/module.h 已删除 100644 → 0
浏览文件 @ d40ce170
此差异已折叠。
arch/tile/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/unicore32/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/x86/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/x86/boot/Makefile
浏览文件 @ 1e91adf7
此差异已折叠。
arch/x86/um/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
arch/xtensa/include/asm/module.h
浏览文件 @ 1e91adf7
此差异已折叠。
crypto/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
crypto/Makefile
浏览文件 @ 1e91adf7
此差异已折叠。
crypto/asymmetric_keys/.gitignore 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
crypto/asymmetric_keys/Kconfig 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
crypto/asymmetric_keys/Makefile 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
crypto/asymmetric_keys/asymmetric_keys.h 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
crypto/asymmetric_keys/asymmetric_type.c 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
crypto/asymmetric_keys/public_key.c 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
crypto/asymmetric_keys/public_key.h 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
crypto/asymmetric_keys/rsa.c 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
crypto/asymmetric_keys/signature.c 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
crypto/asymmetric_keys/x509.asn1 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
crypto/asymmetric_keys/x509_cert_parser.c 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
crypto/asymmetric_keys/x509_parser.h 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
crypto/asymmetric_keys/x509_public_key.c 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
crypto/asymmetric_keys/x509_rsakey.asn1 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
fs/cifs/cifs_spnego.c
浏览文件 @ 1e91adf7
此差异已折叠。
fs/cifs/cifsacl.c
浏览文件 @ 1e91adf7
此差异已折叠。
include/asm-generic/bitops/count_zeros.h 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
include/asm-generic/module.h
浏览文件 @ 1e91adf7
此差异已折叠。
include/asm-generic/vmlinux.lds.h
浏览文件 @ 1e91adf7
此差异已折叠。
include/crypto/public_key.h 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
include/keys/asymmetric-parser.h 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
include/keys/asymmetric-subtype.h 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
include/keys/asymmetric-type.h 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
include/keys/user-type.h
浏览文件 @ 1e91adf7
此差异已折叠。
include/linux/asn1.h 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
include/linux/asn1_ber_bytecode.h 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
include/linux/asn1_decoder.h 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
include/linux/key-type.h
浏览文件 @ 1e91adf7
此差异已折叠。
include/linux/module.h
浏览文件 @ 1e91adf7
此差异已折叠。
include/linux/moduleloader.h
浏览文件 @ 1e91adf7
此差异已折叠。
include/linux/mpi.h
浏览文件 @ 1e91adf7
此差异已折叠。
include/linux/oid_registry.h 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
init/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
kernel/Makefile
浏览文件 @ 1e91adf7
此差异已折叠。
kernel/modsign_pubkey.c 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
kernel/module-internal.h 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
kernel/module.c
浏览文件 @ 1e91adf7
此差异已折叠。
kernel/module_signing.c 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
lib/.gitignore
浏览文件 @ 1e91adf7
此差异已折叠。
lib/Kconfig
浏览文件 @ 1e91adf7
此差异已折叠。
lib/Makefile
浏览文件 @ 1e91adf7
此差异已折叠。
lib/asn1_decoder.c 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
lib/build_OID_registry 0 → 100755
浏览文件 @ 1e91adf7
此差异已折叠。
lib/mpi/Makefile
浏览文件 @ 1e91adf7
此差异已折叠。
lib/mpi/longlong.h
浏览文件 @ 1e91adf7
此差异已折叠。
lib/mpi/mpi-bit.c
浏览文件 @ 1e91adf7
此差异已折叠。
lib/mpi/mpi-cmp.c 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
lib/mpi/mpi-pow.c
浏览文件 @ 1e91adf7
此差异已折叠。
lib/mpi/mpicoder.c
浏览文件 @ 1e91adf7
此差异已折叠。
lib/oid_registry.c 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
net/ceph/crypto.c
浏览文件 @ 1e91adf7
此差异已折叠。
net/dns_resolver/dns_key.c
浏览文件 @ 1e91adf7
此差异已折叠。
net/rxrpc/ar-key.c
浏览文件 @ 1e91adf7
此差异已折叠。
scripts/.gitignore
浏览文件 @ 1e91adf7
此差异已折叠。
scripts/Makefile
浏览文件 @ 1e91adf7
此差异已折叠。
scripts/Makefile.build
浏览文件 @ 1e91adf7
此差异已折叠。
scripts/Makefile.modpost
浏览文件 @ 1e91adf7
此差异已折叠。
scripts/asn1_compiler.c 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
scripts/sign-file 0 → 100644
浏览文件 @ 1e91adf7
此差异已折叠。
scripts/x509keyid 0 → 100755
浏览文件 @ 1e91adf7
此差异已折叠。
security/keys/key.c
浏览文件 @ 1e91adf7
此差异已折叠。
security/keys/keyctl.c
浏览文件 @ 1e91adf7
此差异已折叠。
security/keys/keyring.c
浏览文件 @ 1e91adf7
此差异已折叠。
security/keys/request_key_auth.c
浏览文件 @ 1e91adf7
此差异已折叠。
security/keys/trusted.c
浏览文件 @ 1e91adf7
此差异已折叠。
security/keys/user_defined.c
浏览文件 @ 1e91adf7
此差异已折叠。
tools/perf/Makefile
浏览文件 @ 1e91adf7
此差异已折叠。
tools/perf/perf.h
浏览文件 @ 1e91adf7
此差异已折叠。
tools/perf/util/evsel.c
浏览文件 @ 1e91adf7
此差异已折叠。
tools/perf/util/evsel.h
浏览文件 @ 1e91adf7
此差异已折叠。
tools/perf/util/header.h
浏览文件 @ 1e91adf7
此差异已折叠。
tools/perf/util/parse-events.h
浏览文件 @ 1e91adf7
此差异已折叠。
tools/perf/util/pmu.h
浏览文件 @ 1e91adf7
此差异已折叠。
tools/perf/util/session.h
浏览文件 @ 1e91adf7
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或