dt-bindings: i2c: brcmstb: Add BCM2711 BSC/AUTO-I2C binding

The HDMI blocks in the BCM2771 have an i2c controller to retrieve the
EDID. This block is split into two parts, the BSC and the AUTO_I2C,
lying in two separate register areas.

The AUTO_I2C block has a mailbox-like interface and will take away the
BSC control from the CPU if enabled. However, the BSC is the actually
the same controller than the one supported by the brcmstb driver, and
the AUTO_I2C doesn't really bring any immediate benefit.

We can model it in the DT as a single device with two register range,
which will allow us to use or or the other in the driver without
changing anything in the DT.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml

@@ -15,11 +15,21 @@ allOf:
 properties:
   compatible:
     enum:
+      - brcm,bcm2711-hdmi-i2c
       - brcm,brcmstb-i2c
       - brcm,brcmper-i2c
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: BSC register range
+      - description: Auto-I2C register range
+
+  reg-names:
+    items:
+      - const: bsc
+      - const: auto-i2c
 
   interrupts:
     maxItems: 1
@@ -45,6 +55,26 @@ required:
 
 unevaluatedProperties: false
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - brcm,bcm2711-hdmi-i2c
+
+then:
+  properties:
+    reg:
+      minItems: 2
+
+  required:
+    - reg-names
+
+else:
+  properties:
+    reg:
+      maxItems: 1
+
 examples:
   - |
       bsca: i2c@f0406200 {
@@ -56,4 +86,12 @@ examples:
           interrupt-names = "upg_bsca";
       };
 
+  - |
+      ddc0: i2c@7ef04500 {
+          compatible = "brcm,bcm2711-hdmi-i2c";
+          reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
+          reg-names = "bsc", "auto-i2c";
+          clock-frequency = <390000>;
+      };
+
 ...