ARM: dts: use macros in clock bindings for exynos5420

The patch replaces magic numbers with macros defined in DT header
in exynos5420 clock bindings.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NTomasz Figa <t.figa@samsung.com>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Documentation/devicetree/bindings/clock/exynos5420-clock.txt

@@ -13,184 +13,12 @@ Required Properties:
 
 - #clock-cells: should be 1.
 
-The following is the list of clocks generated by the controller. Each clock is
-assigned an identifier and client nodes use this identifier to specify the
-clock which they consume.
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
 
-
-       [Core Clocks]
-
-  Clock			ID
-  ----------------------------
-
-  fin_pll		1
-
-  [Clock Gate for Special Clocks]
-
-  Clock			ID
-  ----------------------------
-  sclk_uart0		128
-  sclk_uart1		129
-  sclk_uart2		130
-  sclk_uart3		131
-  sclk_mmc0		132
-  sclk_mmc1		133
-  sclk_mmc2		134
-  sclk_spi0		135
-  sclk_spi1		136
-  sclk_spi2		137
-  sclk_i2s1		138
-  sclk_i2s2		139
-  sclk_pcm1		140
-  sclk_pcm2		141
-  sclk_spdif		142
-  sclk_hdmi		143
-  sclk_pixel		144
-  sclk_dp1		145
-  sclk_mipi1		146
-  sclk_fimd1		147
-  sclk_maudio0		148
-  sclk_maupcm0		149
-  sclk_usbd300		150
-  sclk_usbd301		151
-  sclk_usbphy300	152
-  sclk_usbphy301	153
-  sclk_unipro		154
-  sclk_pwm		155
-  sclk_gscl_wa		156
-  sclk_gscl_wb		157
-  sclk_hdmiphy		158
-
-   [Peripheral Clock Gates]
-
-  Clock			ID
-  ----------------------------
-
-  aclk66_peric		256
-  uart0			257
-  uart1			258
-  uart2			259
-  uart3			260
-  i2c0			261
-  i2c1			262
-  i2c2			263
-  i2c3			264
-  i2c4			265
-  i2c5			266
-  i2c6			267
-  i2c7			268
-  i2c_hdmi		269
-  tsadc			270
-  spi0			271
-  spi1			272
-  spi2			273
-  keyif			274
-  i2s1			275
-  i2s2			276
-  pcm1			277
-  pcm2			278
-  pwm			279
-  spdif			280
-  i2c8			281
-  i2c9			282
-  i2c10			283
-  aclk66_psgen		300
-  chipid		301
-  sysreg		302
-  tzpc0			303
-  tzpc1			304
-  tzpc2			305
-  tzpc3			306
-  tzpc4			307
-  tzpc5			308
-  tzpc6			309
-  tzpc7			310
-  tzpc8			311
-  tzpc9			312
-  hdmi_cec		313
-  seckey		314
-  mct			315
-  wdt			316
-  rtc			317
-  tmu			318
-  tmu_gpu		319
-  pclk66_gpio		330
-  aclk200_fsys2		350
-  mmc0			351
-  mmc1			352
-  mmc2			353
-  sromc			354
-  ufs			355
-  aclk200_fsys		360
-  tsi			361
-  pdma0			362
-  pdma1			363
-  rtic			364
-  usbh20		365
-  usbd300		366
-  usbd301		377
-  aclk400_mscl		380
-  mscl0			381
-  mscl1			382
-  mscl2			383
-  smmu_mscl0		384
-  smmu_mscl1		385
-  smmu_mscl2		386
-  aclk333		400
-  mfc			401
-  smmu_mfcl		402
-  smmu_mfcr		403
-  aclk200_disp1		410
-  dsim1			411
-  dp1			412
-  hdmi			413
-  aclk300_disp1		420
-  fimd1			421
-  smmu_fimd1		422
-  aclk166		430
-  mixer			431
-  aclk266		440
-  rotator		441
-  mdma1			442
-  smmu_rotator		443
-  smmu_mdma1		444
-  aclk300_jpeg		450
-  jpeg			451
-  jpeg2			452
-  smmu_jpeg		453
-  aclk300_gscl		460
-  smmu_gscl0		461
-  smmu_gscl1		462
-  gscl_wa		463
-  gscl_wb		464
-  gscl0			465
-  gscl1			466
-  clk_3aa		467
-  aclk266_g2d		470
-  sss			471
-  slim_sss		472
-  mdma0			473
-  aclk333_g2d		480
-  g2d			481
-  aclk333_432_gscl	490
-  smmu_3aa		491
-  smmu_fimcl0		492
-  smmu_fimcl1		493
-  smmu_fimcl3		494
-  fimc_lite3		495
-  aclk_g3d		500
-  g3d			501
-  smmu_mixer		502
-
-  Mux			ID
-  ----------------------------
-
-  mout_hdmi		640
-
-  Divider		ID
-  ----------------------------
-
-  dout_pixel		768
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5420.h header and can be used in device
+tree sources.
 
 Example 1: An example of a clock controller node is listed below.
 
@@ -208,6 +36,6 @@ Example 2: UART controller node that consumes the clock generated by the clock
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13820000 0x100>;
 		interrupts = <0 54 0>;
-		clocks = <&clock 259>, <&clock 130>;
+		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
 		clock-names = "uart", "clk_uart_baud0";
 	};

arch/arm/boot/dts/exynos5420.dtsi

@@ -13,6 +13,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <dt-bindings/clock/exynos5420.h>
 #include "exynos5.dtsi"
 #include "exynos5420-pinctrl.dtsi"
 
@@ -119,7 +120,8 @@
 		compatible = "samsung,exynos5420-audss-clock";
 		reg = <0x03810000 0x0C>;
 		#clock-cells = <1>;
-		clocks = <&clock 1>, <&clock 5>, <&clock 148>, <&clock 149>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
+			 <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
 		clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
 	};
 
@@ -127,7 +129,7 @@
 		compatible = "samsung,mfc-v7";
 		reg = <0x11000000 0x10000>;
 		interrupts = <0 96 0>;
-		clocks = <&clock 401>;
+		clocks = <&clock CLK_MFC>;
 		clock-names = "mfc";
 	};
 
@@ -137,7 +139,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x12200000 0x2000>;
-		clocks = <&clock 351>, <&clock 132>;
+		clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
 		clock-names = "biu", "ciu";
 		fifo-depth = <0x40>;
 		status = "disabled";
@@ -149,7 +151,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x12210000 0x2000>;
-		clocks = <&clock 352>, <&clock 133>;
+		clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
 		clock-names = "biu", "ciu";
 		fifo-depth = <0x40>;
 		status = "disabled";
@@ -161,7 +163,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x12220000 0x1000>;
-		clocks = <&clock 353>, <&clock 134>;
+		clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
 		clock-names = "biu", "ciu";
 		fifo-depth = <0x40>;
 		status = "disabled";
@@ -175,7 +177,7 @@
 		interrupt-parent = <&mct_map>;
 		interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
 				<8>, <9>, <10>, <11>;
-		clocks = <&clock 1>, <&clock 315>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
 		clock-names = "fin_pll", "mct";
 
 		mct_map: mct-map {
@@ -269,7 +271,7 @@
 	};
 
 	rtc@101E0000 {
-		clocks = <&clock 317>;
+		clocks = <&clock CLK_RTC>;
 		clock-names = "rtc";
 		status = "disabled";
 	};
@@ -296,7 +298,7 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121A0000 0x1000>;
 			interrupts = <0 34 0>;
-			clocks = <&clock 362>;
+			clocks = <&clock CLK_PDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
@@ -307,7 +309,7 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121B0000 0x1000>;
 			interrupts = <0 35 0>;
-			clocks = <&clock 363>;
+			clocks = <&clock CLK_PDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
@@ -318,7 +320,7 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x10800000 0x1000>;
 			interrupts = <0 33 0>;
-			clocks = <&clock 473>;
+			clocks = <&clock CLK_MDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
@@ -329,7 +331,7 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x11C10000 0x1000>;
 			interrupts = <0 124 0>;
-			clocks = <&clock 442>;
+			clocks = <&clock CLK_MDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
@@ -360,7 +362,7 @@
 		dmas = <&pdma1 12
 			&pdma1 11>;
 		dma-names = "tx", "rx";
-		clocks = <&clock 275>, <&clock 138>;
+		clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
 		clock-names = "iis", "i2s_opclk0";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s1_bus>;
@@ -373,7 +375,7 @@
 		dmas = <&pdma0 12
 			&pdma0 11>;
 		dma-names = "tx", "rx";
-		clocks = <&clock 276>, <&clock 139>;
+		clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
 		clock-names = "iis", "i2s_opclk0";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s2_bus>;
@@ -391,7 +393,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi0_bus>;
-		clocks = <&clock 271>, <&clock 135>;
+		clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
 		clock-names = "spi", "spi_busclk0";
 		status = "disabled";
 	};
@@ -407,7 +409,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi1_bus>;
-		clocks = <&clock 272>, <&clock 136>;
+		clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
 		clock-names = "spi", "spi_busclk0";
 		status = "disabled";
 	};
@@ -423,28 +425,28 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi2_bus>;
-		clocks = <&clock 273>, <&clock 137>;
+		clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
 		clock-names = "spi", "spi_busclk0";
 		status = "disabled";
 	};
 
 	serial@12C00000 {
-		clocks = <&clock 257>, <&clock 128>;
+		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	serial@12C10000 {
-		clocks = <&clock 258>, <&clock 129>;
+		clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	serial@12C20000 {
-		clocks = <&clock 259>, <&clock 130>;
+		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	serial@12C30000 {
-		clocks = <&clock 260>, <&clock 131>;
+		clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
@@ -453,7 +455,7 @@
 		reg = <0x12dd0000 0x100>;
 		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
 		#pwm-cells = <3>;
-		clocks = <&clock 279>;
+		clocks = <&clock CLK_PWM>;
 		clock-names = "timers";
 	};
 
@@ -464,7 +466,7 @@
 	};
 
 	dp-controller@145B0000 {
-		clocks = <&clock 412>;
+		clocks = <&clock CLK_DP1>;
 		clock-names = "dp";
 		phys = <&dp_phy>;
 		phy-names = "dp";
@@ -472,7 +474,7 @@
 
 	fimd@14400000 {
 		samsung,power-domain = <&disp_pd>;
-		clocks = <&clock 147>, <&clock 421>;
+		clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
 		clock-names = "sclk_fimd", "fimd";
 	};
 
@@ -480,7 +482,7 @@
 		compatible = "samsung,exynos-adc-v2";
 		reg = <0x12D10000 0x100>, <0x10040720 0x4>;
 		interrupts = <0 106 0>;
-		clocks = <&clock 270>;
+		clocks = <&clock CLK_TSADC>;
 		clock-names = "adc";
 		#io-channel-cells = <1>;
 		io-channel-ranges;
@@ -493,7 +495,7 @@
 		interrupts = <0 56 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 261>;
+		clocks = <&clock CLK_I2C0>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c0_bus>;
@@ -506,7 +508,7 @@
 		interrupts = <0 57 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 262>;
+		clocks = <&clock CLK_I2C1>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c1_bus>;
@@ -519,7 +521,7 @@
 		interrupts = <0 58 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 263>;
+		clocks = <&clock CLK_I2C2>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c2_bus>;
@@ -532,7 +534,7 @@
 		interrupts = <0 59 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 264>;
+		clocks = <&clock CLK_I2C3>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c3_bus>;
@@ -547,7 +549,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c4_hs_bus>;
-		clocks = <&clock 265>;
+		clocks = <&clock CLK_I2C4>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -560,7 +562,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c5_hs_bus>;
-		clocks = <&clock 266>;
+		clocks = <&clock CLK_I2C5>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -573,7 +575,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c6_hs_bus>;
-		clocks = <&clock 267>;
+		clocks = <&clock CLK_I2C6>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -586,7 +588,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c7_hs_bus>;
-		clocks = <&clock 268>;
+		clocks = <&clock CLK_I2C7>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -599,7 +601,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c8_hs_bus>;
-		clocks = <&clock 281>;
+		clocks = <&clock CLK_I2C8>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -612,7 +614,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c9_hs_bus>;
-		clocks = <&clock 282>;
+		clocks = <&clock CLK_I2C9>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -625,7 +627,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c10_hs_bus>;
-		clocks = <&clock 283>;
+		clocks = <&clock CLK_I2C10>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -634,8 +636,9 @@
 		compatible = "samsung,exynos4212-hdmi";
 		reg = <0x14530000 0x70000>;
 		interrupts = <0 95 0>;
-		clocks = <&clock 413>, <&clock 143>, <&clock 768>,
-			<&clock 158>, <&clock 640>;
+		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+			 <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
+			 <&clock CLK_MOUT_HDMI>;
 		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
 			"sclk_hdmiphy", "mout_hdmi";
 		status = "disabled";
@@ -645,7 +648,7 @@
 		compatible = "samsung,exynos5420-mixer";
 		reg = <0x14450000 0x10000>;
 		interrupts = <0 94 0>;
-		clocks = <&clock 431>, <&clock 143>;
+		clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
 		clock-names = "mixer", "sclk_hdmi";
 	};
 
@@ -653,7 +656,7 @@
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e00000 0x1000>;
 		interrupts = <0 85 0>;
-		clocks = <&clock 465>;
+		clocks = <&clock CLK_GSCL0>;
 		clock-names = "gscl";
 		samsung,power-domain = <&gsc_pd>;
 	};
@@ -662,7 +665,7 @@
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e10000 0x1000>;
 		interrupts = <0 86 0>;
-		clocks = <&clock 466>;
+		clocks = <&clock CLK_GSCL1>;
 		clock-names = "gscl";
 		samsung,power-domain = <&gsc_pd>;
 	};
@@ -676,7 +679,7 @@
 		compatible = "samsung,exynos5420-tmu";
 		reg = <0x10060000 0x100>;
 		interrupts = <0 65 0>;
-		clocks = <&clock 318>;
+		clocks = <&clock CLK_TMU>;
 		clock-names = "tmu_apbif";
 	};
 
@@ -684,7 +687,7 @@
 		compatible = "samsung,exynos5420-tmu";
 		reg = <0x10064000 0x100>;
 		interrupts = <0 183 0>;
-		clocks = <&clock 318>;
+		clocks = <&clock CLK_TMU>;
 		clock-names = "tmu_apbif";
 	};
 
@@ -692,7 +695,7 @@
 		compatible = "samsung,exynos5420-tmu-ext-triminfo";
 		reg = <0x10068000 0x100>, <0x1006c000 0x4>;
 		interrupts = <0 184 0>;
-		clocks = <&clock 318>, <&clock 318>;
+		clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
 		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
 	};
 
@@ -700,7 +703,7 @@
 		compatible = "samsung,exynos5420-tmu-ext-triminfo";
 		reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
 		interrupts = <0 185 0>;
-		clocks = <&clock 318>, <&clock 319>;
+		clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
 		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
 	};
 
@@ -708,7 +711,7 @@
 		compatible = "samsung,exynos5420-tmu-ext-triminfo";
 		reg = <0x100a0000 0x100>, <0x10068000 0x4>;
 		interrupts = <0 215 0>;
-		clocks = <&clock 319>, <&clock 318>;
+		clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
 		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
 	};
 
@@ -716,7 +719,7 @@
 		compatible = "samsung,exynos5420-wdt";
 		reg = <0x101D0000 0x100>;
 		interrupts = <0 42 0>;
-		clocks = <&clock 316>;
+		clocks = <&clock CLK_WDT>;
 		clock-names = "watchdog";
 		samsung,syscon-phandle = <&pmu_system_controller>;
         };