提交 1dc9d289 编写于 作者: A Alexandre TORGUE 提交者: Linus Walleij

pinctrl: stm32: add possibility to use gpio-ranges to declare bank range

Use device tree entries to declare gpio range. It will allow to use
no contiguous gpio bank and holes inside a bank.
Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
上级 5715092a
......@@ -71,6 +71,7 @@ struct stm32_gpio_bank {
struct pinctrl_gpio_range range;
struct fwnode_handle *fwnode;
struct irq_domain *domain;
u32 bank_nr;
};
struct stm32_pinctrl {
......@@ -138,6 +139,17 @@ static inline void __stm32_gpio_set(struct stm32_gpio_bank *bank,
static int stm32_gpio_request(struct gpio_chip *chip, unsigned offset)
{
struct stm32_gpio_bank *bank = gpiochip_get_data(chip);
struct stm32_pinctrl *pctl = dev_get_drvdata(bank->gpio_chip.parent);
struct pinctrl_gpio_range *range;
int pin = offset + (bank->bank_nr * STM32_GPIO_PINS_PER_BANK);
range = pinctrl_find_gpio_range_from_pin_nolock(pctl->pctl_dev, pin);
if (!range) {
dev_err(pctl->dev, "pin %d not in range.\n", pin);
return -EINVAL;
}
return pinctrl_request_gpio(chip->base + offset);
}
......@@ -235,7 +247,7 @@ static void stm32_gpio_domain_activate(struct irq_domain *d,
struct stm32_gpio_bank *bank = d->host_data;
struct stm32_pinctrl *pctl = dev_get_drvdata(bank->gpio_chip.parent);
regmap_field_write(pctl->irqmux[irq_data->hwirq], bank->range.id);
regmap_field_write(pctl->irqmux[irq_data->hwirq], bank->bank_nr);
gpiochip_lock_as_irq(&bank->gpio_chip, irq_data->hwirq);
}
......@@ -589,7 +601,7 @@ static int stm32_pmx_set_mux(struct pinctrl_dev *pctldev,
}
range = pinctrl_find_gpio_range_from_pin(pctldev, g->pin);
bank = gpio_range_to_bank(range);
bank = gpiochip_get_data(range->gc);
pin = stm32_gpio_pin(g->pin);
mode = stm32_gpio_get_mode(function);
......@@ -604,7 +616,7 @@ static int stm32_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range, unsigned gpio,
bool input)
{
struct stm32_gpio_bank *bank = gpio_range_to_bank(range);
struct stm32_gpio_bank *bank = gpiochip_get_data(range->gc);
int pin = stm32_gpio_pin(gpio);
stm32_pmx_set_mode(bank, pin, !input, 0);
......@@ -762,7 +774,7 @@ static int stm32_pconf_parse_conf(struct pinctrl_dev *pctldev,
int offset, ret = 0;
range = pinctrl_find_gpio_range_from_pin(pctldev, pin);
bank = gpio_range_to_bank(range);
bank = gpiochip_get_data(range->gc);
offset = stm32_gpio_pin(pin);
switch (param) {
......@@ -843,7 +855,7 @@ static void stm32_pconf_dbg_show(struct pinctrl_dev *pctldev,
bool val;
range = pinctrl_find_gpio_range_from_pin_nolock(pctldev, pin);
bank = gpio_range_to_bank(range);
bank = gpiochip_get_data(range->gc);
offset = stm32_gpio_pin(pin);
stm32_pmx_get_mode(bank, offset, &mode, &alt);
......@@ -898,13 +910,14 @@ static const struct pinconf_ops stm32_pconf_ops = {
static int stm32_gpiolib_register_bank(struct stm32_pinctrl *pctl,
struct device_node *np)
{
int bank_nr = pctl->nbanks;
struct stm32_gpio_bank *bank = &pctl->banks[bank_nr];
struct stm32_gpio_bank *bank = &pctl->banks[pctl->nbanks];
struct pinctrl_gpio_range *range = &bank->range;
struct of_phandle_args args;
struct device *dev = pctl->dev;
struct resource res;
struct reset_control *rstc;
int err, npins;
int npins = STM32_GPIO_PINS_PER_BANK;
int bank_nr, err;
rstc = of_reset_control_get(np, NULL);
if (!IS_ERR(rstc))
......@@ -929,28 +942,33 @@ static int stm32_gpiolib_register_bank(struct stm32_pinctrl *pctl,
return err;
}
npins = pctl->match_data->npins;
npins -= bank_nr * STM32_GPIO_PINS_PER_BANK;
if (npins < 0)
return -EINVAL;
else if (npins > STM32_GPIO_PINS_PER_BANK)
npins = STM32_GPIO_PINS_PER_BANK;
bank->gpio_chip = stm32_gpio_template;
of_property_read_string(np, "st,bank-name", &bank->gpio_chip.label);
if (!of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, 0, &args)) {
bank_nr = args.args[1] / STM32_GPIO_PINS_PER_BANK;
bank->gpio_chip.base = args.args[1];
} else {
bank_nr = pctl->nbanks;
bank->gpio_chip.base = bank_nr * STM32_GPIO_PINS_PER_BANK;
range->name = bank->gpio_chip.label;
range->id = bank_nr;
range->pin_base = range->id * STM32_GPIO_PINS_PER_BANK;
range->base = range->id * STM32_GPIO_PINS_PER_BANK;
range->npins = npins;
range->gc = &bank->gpio_chip;
pinctrl_add_gpio_range(pctl->pctl_dev,
&pctl->banks[bank_nr].range);
}
bank->gpio_chip.base = bank_nr * STM32_GPIO_PINS_PER_BANK;
bank->gpio_chip.ngpio = npins;
bank->gpio_chip.of_node = np;
bank->gpio_chip.parent = dev;
bank->bank_nr = bank_nr;
spin_lock_init(&bank->lock);
of_property_read_string(np, "st,bank-name", &range->name);
bank->gpio_chip.label = range->name;
range->id = bank_nr;
range->pin_base = range->base = range->id * STM32_GPIO_PINS_PER_BANK;
range->npins = bank->gpio_chip.ngpio;
range->gc = &bank->gpio_chip;
/* create irq hierarchical domain */
bank->fwnode = of_node_to_fwnode(np);
......@@ -967,7 +985,7 @@ static int stm32_gpiolib_register_bank(struct stm32_pinctrl *pctl,
return err;
}
dev_info(dev, "%s bank added\n", range->name);
dev_info(dev, "%s bank added\n", bank->gpio_chip.label);
return 0;
}
......@@ -1086,30 +1104,6 @@ int stm32_pctl_probe(struct platform_device *pdev)
return ret;
}
for_each_child_of_node(np, child)
if (of_property_read_bool(child, "gpio-controller"))
banks++;
if (!banks) {
dev_err(dev, "at least one GPIO bank is required\n");
return -EINVAL;
}
pctl->banks = devm_kcalloc(dev, banks, sizeof(*pctl->banks),
GFP_KERNEL);
if (!pctl->banks)
return -ENOMEM;
for_each_child_of_node(np, child) {
if (of_property_read_bool(child, "gpio-controller")) {
ret = stm32_gpiolib_register_bank(pctl, child);
if (ret)
return ret;
pctl->nbanks++;
}
}
pins = devm_kcalloc(&pdev->dev, pctl->match_data->npins, sizeof(*pins),
GFP_KERNEL);
if (!pins)
......@@ -1129,13 +1123,34 @@ int stm32_pctl_probe(struct platform_device *pdev)
pctl->pctl_dev = devm_pinctrl_register(&pdev->dev, &pctl->pctl_desc,
pctl);
if (IS_ERR(pctl->pctl_dev)) {
dev_err(&pdev->dev, "Failed pinctrl registration\n");
return PTR_ERR(pctl->pctl_dev);
}
for (i = 0; i < pctl->nbanks; i++)
pinctrl_add_gpio_range(pctl->pctl_dev, &pctl->banks[i].range);
for_each_child_of_node(np, child)
if (of_property_read_bool(child, "gpio-controller"))
banks++;
if (!banks) {
dev_err(dev, "at least one GPIO bank is required\n");
return -EINVAL;
}
pctl->banks = devm_kcalloc(dev, banks, sizeof(*pctl->banks),
GFP_KERNEL);
if (!pctl->banks)
return -ENOMEM;
for_each_child_of_node(np, child) {
if (of_property_read_bool(child, "gpio-controller")) {
ret = stm32_gpiolib_register_bank(pctl, child);
if (ret)
return ret;
pctl->nbanks++;
}
}
dev_info(dev, "Pinctrl STM32 initialized\n");
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册