提交 1dc5c2cf 编写于 作者: J John Crispin 提交者: Ralf Baechle

MIPS: ralink: add support for MT7620n

This is the small version of MT7620a.
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/8030/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 a097b13c
...@@ -25,11 +25,8 @@ ...@@ -25,11 +25,8 @@
#define SYSC_REG_CPLL_CONFIG0 0x54 #define SYSC_REG_CPLL_CONFIG0 0x54
#define SYSC_REG_CPLL_CONFIG1 0x58 #define SYSC_REG_CPLL_CONFIG1 0x58
#define MT7620N_CHIP_NAME0 0x33365452 #define MT7620_CHIP_NAME0 0x3637544d
#define MT7620N_CHIP_NAME1 0x20203235 #define MT7620_CHIP_NAME1 0x20203032
#define MT7620A_CHIP_NAME0 0x3637544d
#define MT7620A_CHIP_NAME1 0x20203032
#define SYSCFG0_XTAL_FREQ_SEL BIT(6) #define SYSCFG0_XTAL_FREQ_SEL BIT(6)
......
...@@ -277,6 +277,7 @@ void __init ralink_clk_init(void) ...@@ -277,6 +277,7 @@ void __init ralink_clk_init(void)
ralink_clk_add("10000500.uart", periph_rate); ralink_clk_add("10000500.uart", periph_rate);
ralink_clk_add("10000b00.spi", sys_rate); ralink_clk_add("10000b00.spi", sys_rate);
ralink_clk_add("10000c00.uartlite", periph_rate); ralink_clk_add("10000c00.uartlite", periph_rate);
ralink_clk_add("10180000.wmac", xtal_rate);
} }
void __init ralink_of_remap(void) void __init ralink_of_remap(void)
...@@ -298,22 +299,27 @@ void prom_soc_init(struct ralink_soc_info *soc_info) ...@@ -298,22 +299,27 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
u32 cfg0; u32 cfg0;
u32 pmu0; u32 pmu0;
u32 pmu1; u32 pmu1;
u32 bga;
n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0); n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1); n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
bga = (rev >> CHIP_REV_PKG_SHIFT) & CHIP_REV_PKG_MASK;
if (n0 == MT7620N_CHIP_NAME0 && n1 == MT7620N_CHIP_NAME1) { if (n0 != MT7620_CHIP_NAME0 || n1 != MT7620_CHIP_NAME1)
name = "MT7620N"; panic("mt7620: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
soc_info->compatible = "ralink,mt7620n-soc";
} else if (n0 == MT7620A_CHIP_NAME0 && n1 == MT7620A_CHIP_NAME1) { if (bga) {
name = "MT7620A"; name = "MT7620A";
soc_info->compatible = "ralink,mt7620a-soc"; soc_info->compatible = "ralink,mt7620a-soc";
} else { } else {
panic("mt7620: unknown SoC, n0:%08x n1:%08x", n0, n1); name = "MT7620N";
soc_info->compatible = "ralink,mt7620n-soc";
#ifdef CONFIG_PCI
panic("mt7620n is only supported for non pci kernels");
#endif
} }
rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN, snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
"Ralink %s ver:%u eco:%u", "Ralink %s ver:%u eco:%u",
name, name,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册