net: dsa: Call dsa_untag_bridge_pvid() from dsa_switch_rcv()

When a DSA switch driver needs to call dsa_untag_bridge_pvid(), it can
set dsa_switch::untag_brige_pvid to indicate this is necessary.

This is a pre-requisite to making sure that we are always calling
dsa_untag_bridge_pvid() after eth_type_trans() has been called.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

include/net/dsa.h

@@ -308,6 +308,14 @@ struct dsa_switch {
 	 */
 	bool			configure_vlan_while_not_filtering;
 
+	/* If the switch driver always programs the CPU port as egress tagged
+	 * despite the VLAN configuration indicating otherwise, then setting
+	 * @untag_bridge_pvid will force the DSA receive path to pop the bridge's
+	 * default_pvid VLAN tagged frames to offer a consistent behavior
+	 * between a vlan_filtering=0 and vlan_filtering=1 bridge device.
+	 */
+	bool			untag_bridge_pvid;
+
 	/* In case vlan_filtering_is_global is set, the VLAN awareness state
 	 * should be retrieved from here and not from the per-port settings.
 	 */

net/dsa/dsa.c

@@ -225,6 +225,15 @@ static int dsa_switch_rcv(struct sk_buff *skb, struct net_device *dev,
 	skb->pkt_type = PACKET_HOST;
 	skb->protocol = eth_type_trans(skb, skb->dev);
 
+	if (unlikely(cpu_dp->ds->untag_bridge_pvid)) {
+		nskb = dsa_untag_bridge_pvid(skb);
+		if (!nskb) {
+			kfree_skb(skb);
+			return 0;
+		}
+		skb = nskb;
+	}
+
 	s = this_cpu_ptr(p->stats64);
 	u64_stats_update_begin(&s->syncp);
 	s->rx_packets++;