usb: interface authorization: Introduces the default interface authorization

Interfaces are allowed per default.
This can disabled or enabled (again) by writing 0 or 1 to
/sys/bus/usb/devices/usbX/interface_authorized_default
Signed-off-by: NStefan Koch <skoch@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/core/hcd.c

@@ -882,9 +882,53 @@ static ssize_t authorized_default_store(struct device *dev,
 }
 static DEVICE_ATTR_RW(authorized_default);
 
+/*
+ * interface_authorized_default_show - show default authorization status
+ * for USB interfaces
+ *
+ * note: interface_authorized_default is the default value
+ *       for initializing the authorized attribute of interfaces
+ */
+static ssize_t interface_authorized_default_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct usb_device *usb_dev = to_usb_device(dev);
+	struct usb_hcd *hcd = bus_to_hcd(usb_dev->bus);
+
+	return sprintf(buf, "%u\n", !!HCD_INTF_AUTHORIZED(hcd));
+}
+
+/*
+ * interface_authorized_default_store - store default authorization status
+ * for USB interfaces
+ *
+ * note: interface_authorized_default is the default value
+ *       for initializing the authorized attribute of interfaces
+ */
+static ssize_t interface_authorized_default_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct usb_device *usb_dev = to_usb_device(dev);
+	struct usb_hcd *hcd = bus_to_hcd(usb_dev->bus);
+	int rc = count;
+	bool val;
+
+	if (strtobool(buf, &val) != 0)
+		return -EINVAL;
+
+	if (val)
+		set_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags);
+	else
+		clear_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags);
+
+	return rc;
+}
+static DEVICE_ATTR_RW(interface_authorized_default);
+
 /* Group all the USB bus attributes */
 static struct attribute *usb_bus_attrs[] = {
 		&dev_attr_authorized_default.attr,
+		&dev_attr_interface_authorized_default.attr,
 		NULL,
 };
 
@@ -2682,6 +2726,9 @@ int usb_add_hcd(struct usb_hcd *hcd,
 		hcd->authorized_default = authorized_default;
 	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 
+	/* per default all interfaces are authorized */
+	set_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags);
+
 	/* HC is in reset state, but accessible.  Now do the one-time init,
 	 * bottom up so that hcds can customize the root hubs before hub_wq
 	 * starts talking to them.  (Note, bus id is assigned early too.)

drivers/usb/core/message.c

@@ -1807,6 +1807,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
 		intfc = cp->intf_cache[i];
 		intf->altsetting = intfc->altsetting;
 		intf->num_altsetting = intfc->num_altsetting;
+		intf->authorized = !!HCD_INTF_AUTHORIZED(hcd);
 		kref_get(&intfc->ref);
 
 		alt = usb_altnum_to_altsetting(intf, 0);

include/linux/usb/hcd.h

@@ -120,6 +120,7 @@ struct usb_hcd {
 #define HCD_FLAG_WAKEUP_PENDING		4	/* root hub is resuming? */
 #define HCD_FLAG_RH_RUNNING		5	/* root hub is running? */
 #define HCD_FLAG_DEAD			6	/* controller has died? */
+#define HCD_FLAG_INTF_AUTHORIZED	7	/* authorize interfaces? */
 
 	/* The flags can be tested using these macros; they are likely to
 	 * be slightly faster than test_bit().
@@ -131,6 +132,14 @@ struct usb_hcd {
 #define HCD_RH_RUNNING(hcd)	((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING))
 #define HCD_DEAD(hcd)		((hcd)->flags & (1U << HCD_FLAG_DEAD))
 
+	/*
+	 * Specifies if interfaces are authorized by default
+	 * or they require explicit user space authorization; this bit is
+	 * settable through /sys/class/usb_host/X/interface_authorized_default
+	 */
+#define HCD_INTF_AUTHORIZED(hcd) \
+	((hcd)->flags & (1U << HCD_FLAG_INTF_AUTHORIZED))
+
 	/* Flags that get set only during HCD registration or removal. */
 	unsigned		rh_registered:1;/* is root hub registered? */
 	unsigned		rh_pollable:1;	/* may we poll the root hub? */