PCI: layerscape: Add LS1046a support

Add support for the LS1046a PCIe controller.  This device has a different
LUT_DBG offset, so add "lut_dbg" to ls_pcie_drvdata to
describe this difference.

[bhelgaas: changelog, remove now-unused PCIE_LUT_DBG]
Signed-off-by: NMingkai Hu <mingkai.hu@nxp.com>
Signed-off-by: NMinghuan Lian <Minghuan.Lian@nxp.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Documentation/devicetree/bindings/pci/layerscape-pci.txt

@@ -15,6 +15,7 @@ Required properties:
 - compatible: should contain the platform identifier such as:
         "fsl,ls1021a-pcie", "snps,dw-pcie"
         "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie"
+        "fsl,ls1046a-pcie"
 - reg: base addresses and lengths of the PCIe controller
 - interrupts: A list of interrupt outputs of the controller. Must contain an
   entry for each entry in the interrupt-names property.

drivers/pci/host/pci-layerscape.c

@@ -35,12 +35,10 @@
 #define PCIE_STRFMR1		0x71c /* Symbol Timer & Filter Mask Register1 */
 #define PCIE_DBI_RO_WR_EN	0x8bc /* DBI Read-Only Write Enable Register */
 
-/* PEX LUT registers */
-#define PCIE_LUT_DBG		0x7FC /* PEX LUT Debug Register */
-
 struct ls_pcie_drvdata {
 	u32 lut_offset;
 	u32 ltssm_shift;
+	u32 lut_dbg;
 	struct pcie_host_ops *ops;
 };
 
@@ -134,7 +132,7 @@ static int ls_pcie_link_up(struct pcie_port *pp)
 	struct ls_pcie *pcie = to_ls_pcie(pp);
 	u32 state;
 
-	state = (ioread32(pcie->lut + PCIE_LUT_DBG) >>
+	state = (ioread32(pcie->lut + pcie->drvdata->lut_dbg) >>
 		 pcie->drvdata->ltssm_shift) &
 		 LTSSM_STATE_MASK;
 
@@ -196,18 +194,28 @@ static struct ls_pcie_drvdata ls1021_drvdata = {
 static struct ls_pcie_drvdata ls1043_drvdata = {
 	.lut_offset = 0x10000,
 	.ltssm_shift = 24,
+	.lut_dbg = 0x7fc,
+	.ops = &ls_pcie_host_ops,
+};
+
+static struct ls_pcie_drvdata ls1046_drvdata = {
+	.lut_offset = 0x80000,
+	.ltssm_shift = 24,
+	.lut_dbg = 0x407fc,
 	.ops = &ls_pcie_host_ops,
 };
 
 static struct ls_pcie_drvdata ls2080_drvdata = {
 	.lut_offset = 0x80000,
 	.ltssm_shift = 0,
+	.lut_dbg = 0x7fc,
 	.ops = &ls_pcie_host_ops,
 };
 
 static const struct of_device_id ls_pcie_of_match[] = {
 	{ .compatible = "fsl,ls1021a-pcie", .data = &ls1021_drvdata },
 	{ .compatible = "fsl,ls1043a-pcie", .data = &ls1043_drvdata },
+	{ .compatible = "fsl,ls1046a-pcie", .data = &ls1046_drvdata },
 	{ .compatible = "fsl,ls2080a-pcie", .data = &ls2080_drvdata },
 	{ .compatible = "fsl,ls2085a-pcie", .data = &ls2080_drvdata },
 	{ },