提交 1ca65175 编写于 作者: M Mark Brown

ASoC: cs4270: Convert to direct regmap API usage

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NTimur Tabi <timur@freescale.com>
上级 b61d6d40
......@@ -112,14 +112,15 @@
* This array contains the power-on default values of the registers, with the
* exception of the "CHIPID" register (01h). The lower four bits of that
* register contain the hardware revision, so it is treated as volatile.
*
* Also note that on the CS4270, the first readable register is 1, but ASoC
* assumes the first register is 0. Therfore, the array must have an entry for
* register 0, but we use cs4270_reg_is_readable() to tell ASoC that it can't
* be read.
*/
static const u8 cs4270_default_reg_cache[CS4270_LASTREG + 1] = {
0x00, 0x00, 0x00, 0x30, 0x00, 0x60, 0x20, 0x00, 0x00
static const struct reg_default cs4270_reg_defaults[] = {
{ 2, 0x00 },
{ 3, 0x30 },
{ 4, 0x00 },
{ 5, 0x60 },
{ 6, 0x20 },
{ 7, 0x00 },
{ 8, 0x00 },
};
static const char *supply_names[] = {
......@@ -128,7 +129,7 @@ static const char *supply_names[] = {
/* Private data for the CS4270 */
struct cs4270_private {
enum snd_soc_control_type control_type;
struct regmap *regmap;
unsigned int mclk; /* Input frequency of the MCLK pin */
unsigned int mode; /* The mode (I2S or left-justified) */
unsigned int slave_mode;
......@@ -193,12 +194,12 @@ static struct cs4270_mode_ratios cs4270_mode_ratios[] = {
/* The number of MCLK/LRCK ratios supported by the CS4270 */
#define NUM_MCLK_RATIOS ARRAY_SIZE(cs4270_mode_ratios)
static int cs4270_reg_is_readable(struct snd_soc_codec *codec, unsigned int reg)
static bool cs4270_reg_is_readable(struct device *dev, unsigned int reg)
{
return (reg >= CS4270_FIRSTREG) && (reg <= CS4270_LASTREG);
}
static int cs4270_reg_is_volatile(struct snd_soc_codec *codec, unsigned int reg)
static bool cs4270_reg_is_volatile(struct device *dev, unsigned int reg)
{
/* Unreadable registers are considered volatile */
if ((reg < CS4270_FIRSTREG) || (reg > CS4270_LASTREG))
......@@ -492,7 +493,7 @@ static int cs4270_probe(struct snd_soc_codec *codec)
/* Tell ASoC what kind of I/O to use to read the registers. ASoC will
* then do the I2C transactions itself.
*/
ret = snd_soc_codec_set_cache_io(codec, 8, 8, cs4270->control_type);
ret = snd_soc_codec_set_cache_io(codec, 8, 8, SND_SOC_REGMAP);
if (ret < 0) {
dev_err(codec->dev, "failed to set cache I/O (ret=%i)\n", ret);
return ret;
......@@ -587,7 +588,7 @@ static int cs4270_soc_resume(struct snd_soc_codec *codec)
ndelay(500);
/* first restore the entire register cache ... */
snd_soc_cache_sync(codec);
regcache_sync(cs4270->regmap);
/* ... then disable the power-down bits */
reg = snd_soc_read(codec, CS4270_PWRCTL);
......@@ -611,11 +612,6 @@ static const struct snd_soc_codec_driver soc_codec_device_cs4270 = {
.controls = cs4270_snd_controls,
.num_controls = ARRAY_SIZE(cs4270_snd_controls),
.volatile_register = cs4270_reg_is_volatile,
.readable_register = cs4270_reg_is_readable,
.reg_cache_size = CS4270_LASTREG + 1,
.reg_word_size = sizeof(u8),
.reg_cache_default = cs4270_default_reg_cache,
};
/*
......@@ -627,6 +623,18 @@ static const struct of_device_id cs4270_of_match[] = {
};
MODULE_DEVICE_TABLE(of, cs4270_of_match);
static const struct regmap_config cs4270_regmap = {
.reg_bits = 8,
.val_bits = 8,
.max_register = CS4270_LASTREG,
.reg_defaults = cs4270_reg_defaults,
.num_reg_defaults = ARRAY_SIZE(cs4270_reg_defaults),
.cache_type = REGCACHE_RBTREE,
.readable_reg = cs4270_reg_is_readable,
.volatile_reg = cs4270_reg_is_volatile,
};
/**
* cs4270_i2c_probe - initialize the I2C interface of the CS4270
* @i2c_client: the I2C client object
......@@ -640,6 +648,7 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client,
{
struct device_node *np = i2c_client->dev.of_node;
struct cs4270_private *cs4270;
unsigned int val;
int ret, i;
cs4270 = devm_kzalloc(&i2c_client->dev, sizeof(struct cs4270_private),
......@@ -674,16 +683,19 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client,
}
}
/* Verify that we have a CS4270 */
cs4270->regmap = devm_regmap_init_i2c(i2c_client, &cs4270_regmap);
if (IS_ERR(cs4270->regmap))
return PTR_ERR(cs4270->regmap);
ret = i2c_smbus_read_byte_data(i2c_client, CS4270_CHIPID);
/* Verify that we have a CS4270 */
ret = regmap_read(cs4270->regmap, CS4270_CHIPID, &val);
if (ret < 0) {
dev_err(&i2c_client->dev, "failed to read i2c at addr %X\n",
i2c_client->addr);
return ret;
}
/* The top four bits of the chip ID should be 1100. */
if ((ret & 0xF0) != 0xC0) {
if ((val & 0xF0) != 0xC0) {
dev_err(&i2c_client->dev, "device at addr %X is not a CS4270\n",
i2c_client->addr);
return -ENODEV;
......@@ -691,10 +703,9 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client,
dev_info(&i2c_client->dev, "found device at i2c address %X\n",
i2c_client->addr);
dev_info(&i2c_client->dev, "hardware revision %X\n", ret & 0xF);
dev_info(&i2c_client->dev, "hardware revision %X\n", val & 0xF);
i2c_set_clientdata(i2c_client, cs4270);
cs4270->control_type = SND_SOC_I2C;
ret = snd_soc_register_codec(&i2c_client->dev,
&soc_codec_device_cs4270, &cs4270_dai, 1);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册