提交 1b0e372d 编写于 作者: D Daniel J Blueman 提交者: Takashi Iwai

ALSA: hda - Fix beep frequency on IDT 92HD73xx and 92HD71Bxx codecs

Fix HDA beep frequency on IDT 92HD73xx and 92HD71Bxx codecs.
These codecs use the standard beep frequency calculation although the
datasheet says it's linear frequency.

Other IDT/STAC codecs might have the same problem.  They should be
fixed individually later.
Signed-off-by: NDaniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 ea87d1c4
......@@ -202,6 +202,7 @@ struct sigmatel_spec {
unsigned int spdif_mute: 1;
unsigned int check_volume_offset:1;
unsigned int auto_mic:1;
unsigned int linear_tone_beep:1;
/* gpio lines */
unsigned int eapd_mask;
......@@ -3802,7 +3803,7 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out
return err;
if (codec->beep) {
/* IDT/STAC codecs have linear beep tone parameter */
codec->beep->linear_tone = 1;
codec->beep->linear_tone = spec->linear_tone_beep;
/* if no beep switch is available, make its own one */
caps = query_amp_caps(codec, nid, HDA_OUTPUT);
if (!(caps & AC_AMPCAP_MUTE)) {
......@@ -5005,6 +5006,7 @@ static int patch_stac9200(struct hda_codec *codec)
codec->no_trigger_sense = 1;
codec->spec = spec;
spec->linear_tone_beep = 1;
spec->num_pins = ARRAY_SIZE(stac9200_pin_nids);
spec->pin_nids = stac9200_pin_nids;
spec->board_config = snd_hda_check_board_config(codec, STAC_9200_MODELS,
......@@ -5068,6 +5070,7 @@ static int patch_stac925x(struct hda_codec *codec)
codec->no_trigger_sense = 1;
codec->spec = spec;
spec->linear_tone_beep = 1;
spec->num_pins = ARRAY_SIZE(stac925x_pin_nids);
spec->pin_nids = stac925x_pin_nids;
......@@ -5153,6 +5156,7 @@ static int patch_stac92hd73xx(struct hda_codec *codec)
codec->no_trigger_sense = 1;
codec->spec = spec;
spec->linear_tone_beep = 0;
codec->slave_dig_outs = stac92hd73xx_slave_dig_outs;
spec->num_pins = ARRAY_SIZE(stac92hd73xx_pin_nids);
spec->pin_nids = stac92hd73xx_pin_nids;
......@@ -5300,6 +5304,7 @@ static int patch_stac92hd83xxx(struct hda_codec *codec)
codec->no_trigger_sense = 1;
codec->spec = spec;
spec->linear_tone_beep = 1;
codec->slave_dig_outs = stac92hd83xxx_slave_dig_outs;
spec->digbeep_nid = 0x21;
spec->mux_nids = stac92hd83xxx_mux_nids;
......@@ -5522,6 +5527,7 @@ static int patch_stac92hd71bxx(struct hda_codec *codec)
codec->no_trigger_sense = 1;
codec->spec = spec;
spec->linear_tone_beep = 0;
codec->patch_ops = stac92xx_patch_ops;
spec->num_pins = STAC92HD71BXX_NUM_PINS;
switch (codec->vendor_id) {
......@@ -5779,6 +5785,7 @@ static int patch_stac922x(struct hda_codec *codec)
codec->no_trigger_sense = 1;
codec->spec = spec;
spec->linear_tone_beep = 1;
spec->num_pins = ARRAY_SIZE(stac922x_pin_nids);
spec->pin_nids = stac922x_pin_nids;
spec->board_config = snd_hda_check_board_config(codec, STAC_922X_MODELS,
......@@ -5883,6 +5890,7 @@ static int patch_stac927x(struct hda_codec *codec)
codec->no_trigger_sense = 1;
codec->spec = spec;
spec->linear_tone_beep = 1;
codec->slave_dig_outs = stac927x_slave_dig_outs;
spec->num_pins = ARRAY_SIZE(stac927x_pin_nids);
spec->pin_nids = stac927x_pin_nids;
......@@ -6018,6 +6026,7 @@ static int patch_stac9205(struct hda_codec *codec)
codec->no_trigger_sense = 1;
codec->spec = spec;
spec->linear_tone_beep = 1;
spec->num_pins = ARRAY_SIZE(stac9205_pin_nids);
spec->pin_nids = stac9205_pin_nids;
spec->board_config = snd_hda_check_board_config(codec, STAC_9205_MODELS,
......@@ -6174,6 +6183,7 @@ static int patch_stac9872(struct hda_codec *codec)
return -ENOMEM;
codec->no_trigger_sense = 1;
codec->spec = spec;
spec->linear_tone_beep = 1;
spec->num_pins = ARRAY_SIZE(stac9872_pin_nids);
spec->pin_nids = stac9872_pin_nids;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册