rt2x00: rt2800: use correct txop value in tx descriptor

rt2800 devices use a different enumeration to specify what IFS values should
be used on frame transmission compared to the other rt2x00 devices. Hence,
create a new enum called txop that contains the valid values.

Furthermore use the appropriate txop values as found in the ralink drivers:
- TXOP_BACKOFF for management frames
- TXOP_SIFS for subsequent fragments in a burst
- TXOP_HTTXOP for all data frames
Signed-off-by: NHelmut Schaa <helmut.schaa@googlemail.com>
Acked-by: NIvo van Doorn <IvDoorn@gmail.com>
Acked-by: NGertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/rt2x00/rt2800pci.c

@@ -643,7 +643,7 @@ static int rt2800pci_write_tx_data(struct queue_entry* entry,
 	rt2x00_set_field32(&word, TXWI_W0_AMPDU,
 			   test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags));
 	rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density);
-	rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->ifs);
+	rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->txop);
 	rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs);
 	rt2x00_set_field32(&word, TXWI_W0_BW,
 			   test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags));

drivers/net/wireless/rt2x00/rt2800usb.c

@@ -417,7 +417,7 @@ static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field32(&word, TXWI_W0_AMPDU,
 			   test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags));
 	rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density);
-	rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->ifs);
+	rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->txop);
 	rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs);
 	rt2x00_set_field32(&word, TXWI_W0_BW,
 			   test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags));

drivers/net/wireless/rt2x00/rt2x00ht.c

@@ -35,6 +35,7 @@ void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
 {
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
 	struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0];
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data;
 
 	if (tx_info->control.sta)
 		txdesc->mpdu_density =
@@ -66,4 +67,20 @@ void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
 		__set_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags);
 	if (txrate->flags & IEEE80211_TX_RC_SHORT_GI)
 		__set_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags);
+
+	/*
+	 * Determine IFS values
+	 * - Use TXOP_BACKOFF for management frames
+	 * - Use TXOP_SIFS for fragment bursts
+	 * - Use TXOP_HTTXOP for everything else
+	 *
+	 * Note: rt2800 devices won't use CTS protection (if used)
+	 * for frames not transmitted with TXOP_HTTXOP
+	 */
+	if (ieee80211_is_mgmt(hdr->frame_control))
+		txdesc->txop = TXOP_BACKOFF;
+	else if (!(tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT))
+		txdesc->txop = TXOP_SIFS;
+	else
+		txdesc->txop = TXOP_HTTXOP;
 }

drivers/net/wireless/rt2x00/rt2x00queue.h

@@ -299,6 +299,7 @@ enum txentry_desc_flags {
  * @retry_limit: Max number of retries.
  * @aifs: AIFS value.
  * @ifs: IFS value.
+ * @txop: IFS value for 11n capable chips.
  * @cw_min: cwmin value.
  * @cw_max: cwmax value.
  * @cipher: Cipher type used for encryption.
@@ -328,6 +329,7 @@ struct txentry_desc {
 	short retry_limit;
 	short aifs;
 	short ifs;
+	short txop;
 	short cw_min;
 	short cw_max;
 

drivers/net/wireless/rt2x00/rt2x00reg.h

@@ -100,6 +100,16 @@ enum ifs {
 	IFS_NONE = 3,
 };
 
+/*
+ * IFS backoff values for HT devices
+ */
+enum txop {
+	TXOP_HTTXOP = 0,
+	TXOP_PIFS = 1,
+	TXOP_SIFS = 2,
+	TXOP_BACKOFF = 3,
+};
+
 /*
  * Cipher types for hardware encryption
  */