mmc: dw_mmc: Support SDIO interrupts for all slots

The Patch adds the support for SDIO interrupts for all slots.
It includes enabling of SDIO interrupts through dw_mci_enable_sdio_irq
and the handling of the slot specific interrupts in the Interrupt Service
Routine.
Signed-off-by: NShashidhar Hiremath <shashidharh@vayavyalabs.com>
Acked-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NChris Ball <cjb@laptop.org>

drivers/mmc/host/dw_mmc.c

@@ -764,11 +764,29 @@ static int dw_mci_get_cd(struct mmc_host *mmc)
 	return present;
 }
 
+static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb)
+{
+	struct dw_mci_slot *slot = mmc_priv(mmc);
+	struct dw_mci *host = slot->host;
+	u32 int_mask;
+
+	/* Enable/disable Slot Specific SDIO interrupt */
+	int_mask = mci_readl(host, INTMASK);
+	if (enb) {
+		mci_writel(host, INTMASK,
+			   (int_mask | (1 << SDMMC_INT_SDIO(slot->id))));
+	} else {
+		mci_writel(host, INTMASK,
+			   (int_mask & ~(1 << SDMMC_INT_SDIO(slot->id))));
+	}
+}
+
 static const struct mmc_host_ops dw_mci_ops = {
-	.request	= dw_mci_request,
-	.set_ios	= dw_mci_set_ios,
-	.get_ro		= dw_mci_get_ro,
-	.get_cd		= dw_mci_get_cd,
+	.request		= dw_mci_request,
+	.set_ios		= dw_mci_set_ios,
+	.get_ro			= dw_mci_get_ro,
+	.get_cd			= dw_mci_get_cd,
+	.enable_sdio_irq	= dw_mci_enable_sdio_irq,
 };
 
 static void dw_mci_request_end(struct dw_mci *host, struct mmc_request *mrq)
@@ -1406,6 +1424,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
 	struct dw_mci *host = dev_id;
 	u32 status, pending;
 	unsigned int pass_count = 0;
+	int i;
 
 	do {
 		status = mci_readl(host, RINTSTS);
@@ -1477,6 +1496,15 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
 			queue_work(dw_mci_card_workqueue, &host->card_work);
 		}
 
+		/* Handle SDIO Interrupts */
+		for (i = 0; i < host->num_slots; i++) {
+			struct dw_mci_slot *slot = host->slot[i];
+			if (pending & SDMMC_INT_SDIO(i)) {
+				mci_writel(host, RINTSTS, SDMMC_INT_SDIO(i));
+				mmc_signal_sdio_irq(slot->mmc);
+			}
+		}
+
 	} while (pass_count++ < 5);
 
 #ifdef CONFIG_MMC_DW_IDMAC

drivers/mmc/host/dw_mmc.h

@@ -82,7 +82,7 @@
 #define SDMMC_CTYPE_4BIT		BIT(0)
 #define SDMMC_CTYPE_1BIT		0
 /* Interrupt status & mask register defines */
-#define SDMMC_INT_SDIO			BIT(16)
+#define SDMMC_INT_SDIO(n)		BIT(16 + (n))
 #define SDMMC_INT_EBE			BIT(15)
 #define SDMMC_INT_ACD			BIT(14)
 #define SDMMC_INT_SBE			BIT(13)