Merge branch 'drm-intel-fixes' into drm-intel-next

Conflicts:
	drivers/gpu/drm/i915/i915_gem.c
	drivers/gpu/drm/i915/intel_dp.c

drivers/gpu/drm/i915/i915_gem.c

@@ -3356,9 +3356,24 @@ i915_gem_busy_ioctl(struct drm_device *dev, void *data,
 		 * use this buffer rather sooner than later, so issuing the required
 		 * flush earlier is beneficial.
 		 */
-		if (obj->base.write_domain & I915_GEM_GPU_DOMAINS)
+		if (obj->base.write_domain & I915_GEM_GPU_DOMAINS) {
 			i915_gem_flush_ring(dev, obj->ring,
 					    0, obj->base.write_domain);
+		} else if (obj->ring->outstanding_lazy_request ==
+			   obj->last_rendering_seqno) {
+			struct drm_i915_gem_request *request;
+
+			/* This ring is not being cleared by active usage,
+			 * so emit a request to do so.
+			 */
+			request = kzalloc(sizeof(*request), GFP_KERNEL);
+			if (request)
+				ret = i915_add_request(dev,
+						       NULL, request,
+						       obj->ring);
+			else
+				ret = -ENOMEM;
+		}
 
 		/* Update the active list for the hardware's current position.
 		 * Otherwise this only updates on a delayed timer or when irqs

drivers/gpu/drm/i915/intel_dp.c

@@ -1376,6 +1376,9 @@ intel_dp_link_down(struct intel_dp *intel_dp)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	uint32_t DP = intel_dp->DP;
 
+	if ((I915_READ(intel_dp->output_reg) & DP_PORT_EN) == 0)
+		return;
+
 	DRM_DEBUG_KMS("\n");
 
 	if (is_edp(intel_dp)) {
@@ -1399,9 +1402,9 @@ intel_dp_link_down(struct intel_dp *intel_dp)
 	if (is_edp(intel_dp))
 		DP |= DP_LINK_TRAIN_OFF;
 
-	if (!HAS_PCH_CPT(dev) && (DP & DP_PIPEB_SELECT)) {
+	if (!HAS_PCH_CPT(dev) &&
+	    I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) {
 		struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.base.crtc);
-
 		/* Hardware workaround: leaving our transcoder select
 		 * set to transcoder B while it's off will prevent the
 		 * corresponding HDMI output on transcoder A.

drivers/gpu/drm/i915/intel_lvds.c

@@ -68,7 +68,7 @@ static struct intel_lvds *intel_attached_lvds(struct drm_connector *connector)
 /**
  * Sets the power state for the panel.
  */
-static void intel_lvds_set_power(struct intel_lvds *intel_lvds, bool on)
+static void intel_lvds_enable(struct intel_lvds *intel_lvds)
 {
 	struct drm_device *dev = intel_lvds->base.base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -82,26 +82,61 @@ static void intel_lvds_set_power(struct intel_lvds *intel_lvds, bool on)
 		lvds_reg = LVDS;
 	}
 
-	if (on) {
-		I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN);
-		I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
-		intel_panel_set_backlight(dev, dev_priv->backlight_level);
-	} else {
-		dev_priv->backlight_level = intel_panel_get_backlight(dev);
-
-		intel_panel_set_backlight(dev, 0);
-		I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON);
+	I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN);
 
-		if (intel_lvds->pfit_control) {
-			if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000))
-				DRM_ERROR("timed out waiting for panel to power off\n");
-			I915_WRITE(PFIT_CONTROL, 0);
-			intel_lvds->pfit_control = 0;
+	if (intel_lvds->pfit_dirty) {
+		/*
+		 * Enable automatic panel scaling so that non-native modes
+		 * fill the screen.  The panel fitter should only be
+		 * adjusted whilst the pipe is disabled, according to
+		 * register description and PRM.
+		 */
+		DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n",
+			      intel_lvds->pfit_control,
+			      intel_lvds->pfit_pgm_ratios);
+		if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000)) {
+			DRM_ERROR("timed out waiting for panel to power off\n");
+		} else {
+			I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios);
+			I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control);
 			intel_lvds->pfit_dirty = false;
 		}
+	}
+
+	I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
+	POSTING_READ(lvds_reg);
+
+	intel_panel_set_backlight(dev, dev_priv->backlight_level);
+}
 
-		I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN);
+static void intel_lvds_disable(struct intel_lvds *intel_lvds)
+{
+	struct drm_device *dev = intel_lvds->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 ctl_reg, lvds_reg;
+
+	if (HAS_PCH_SPLIT(dev)) {
+		ctl_reg = PCH_PP_CONTROL;
+		lvds_reg = PCH_LVDS;
+	} else {
+		ctl_reg = PP_CONTROL;
+		lvds_reg = LVDS;
+	}
+
+	dev_priv->backlight_level = intel_panel_get_backlight(dev);
+	intel_panel_set_backlight(dev, 0);
+
+	I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON);
+
+	if (intel_lvds->pfit_control) {
+		if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000))
+			DRM_ERROR("timed out waiting for panel to power off\n");
+
+		I915_WRITE(PFIT_CONTROL, 0);
+		intel_lvds->pfit_dirty = true;
 	}
+
+	I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN);
 	POSTING_READ(lvds_reg);
 }
 
@@ -110,9 +145,9 @@ static void intel_lvds_dpms(struct drm_encoder *encoder, int mode)
 	struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
 
 	if (mode == DRM_MODE_DPMS_ON)
-		intel_lvds_set_power(intel_lvds, true);
+		intel_lvds_enable(intel_lvds);
 	else
-		intel_lvds_set_power(intel_lvds, false);
+		intel_lvds_disable(intel_lvds);
 
 	/* XXX: We never power down the LVDS pairs. */
 }
@@ -414,43 +449,18 @@ static void intel_lvds_commit(struct drm_encoder *encoder)
 	/* Always do a full power on as we do not know what state
 	 * we were left in.
 	 */
-	intel_lvds_set_power(intel_lvds, true);
+	intel_lvds_enable(intel_lvds);
 }
 
 static void intel_lvds_mode_set(struct drm_encoder *encoder,
 				struct drm_display_mode *mode,
 				struct drm_display_mode *adjusted_mode)
 {
-	struct drm_device *dev = encoder->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
-
 	/*
 	 * The LVDS pin pair will already have been turned on in the
 	 * intel_crtc_mode_set since it has a large impact on the DPLL
 	 * settings.
 	 */
-
-	if (HAS_PCH_SPLIT(dev))
-		return;
-
-	if (!intel_lvds->pfit_dirty)
-		return;
-
-	/*
-	 * Enable automatic panel scaling so that non-native modes fill the
-	 * screen.  Should be enabled before the pipe is enabled, according to
-	 * register description and PRM.
-	 */
-	DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n",
-		      intel_lvds->pfit_control,
-		      intel_lvds->pfit_pgm_ratios);
-	if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000))
-		DRM_ERROR("timed out waiting for panel to power off\n");
-
-	I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios);
-	I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control);
-	intel_lvds->pfit_dirty = false;
 }
 
 /**

drivers/gpu/drm/i915/intel_ringbuffer.c

@@ -157,23 +157,25 @@ static int init_ring_common(struct intel_ring_buffer *ring)
 
 	/* G45 ring initialization fails to reset head to zero */
 	if (head != 0) {
-		DRM_ERROR("%s head not reset to zero "
-				"ctl %08x head %08x tail %08x start %08x\n",
-				ring->name,
-				I915_READ_CTL(ring),
-				I915_READ_HEAD(ring),
-				I915_READ_TAIL(ring),
-				I915_READ_START(ring));
+		DRM_DEBUG_KMS("%s head not reset to zero "
+			      "ctl %08x head %08x tail %08x start %08x\n",
+			      ring->name,
+			      I915_READ_CTL(ring),
+			      I915_READ_HEAD(ring),
+			      I915_READ_TAIL(ring),
+			      I915_READ_START(ring));
 
 		I915_WRITE_HEAD(ring, 0);
 
-		DRM_ERROR("%s head forced to zero "
-				"ctl %08x head %08x tail %08x start %08x\n",
-				ring->name,
-				I915_READ_CTL(ring),
-				I915_READ_HEAD(ring),
-				I915_READ_TAIL(ring),
-				I915_READ_START(ring));
+		if (I915_READ_HEAD(ring) & HEAD_ADDR) {
+			DRM_ERROR("failed to set %s head to zero "
+				  "ctl %08x head %08x tail %08x start %08x\n",
+				  ring->name,
+				  I915_READ_CTL(ring),
+				  I915_READ_HEAD(ring),
+				  I915_READ_TAIL(ring),
+				  I915_READ_START(ring));
+		}
 	}
 
 	I915_WRITE_CTL(ring,