提交 19f3fa24 编写于 作者: S Stanislaw Gruszka 提交者: John W. Linville

rt2800: limit TX_PWR_CFG_ values to 0xc

Based on AsicAdjustTxPower function from vendor driver
(2011_0719_RT3070_RT3370_RT5370_RT5372_Linux_STA_V2.5.0.3_DPO)
limit per rate TX power values we program into TX_PWR_CFG_ registers.

Note that on some configurations (devices/rates) is allowed to use
bigger values than 0xc, but we use safe maximum value for now. Further
work need to be done to allow use bigger values than 0xc.
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Acked-by: NGertjan van Wingerde <gwingerde@gmail.com>
Acked-by: NIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 cee2c731
无相关合并请求
......@@ -2563,7 +2563,8 @@ static u8 rt2800_compensate_txpower(struct rt2x00_dev *rt2x00dev, int is_rate_b,
} else
reg_limit = 0;
return txpower + delta - reg_limit;
txpower = max(0, txpower + delta - reg_limit);
return min_t(u8, txpower, 0xc);
}
static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册
反馈
建议
客服 返回
顶部