提交 19bcd6c6 编写于 作者: T Timur Tabi 提交者: David S. Miller

net/freescale: do not export any functions from fsl_pq_mdio.c

None of the functions in fsl_pq_mdio.c are used by any other source file,
so there's no point in exporting them.  Merge the header file into the
source file, make all the functions static, remove any EXPORT_SYMBOL
statements, and delete any #include "fsl_pq_mdio.h" statements.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 522609f2
......@@ -45,7 +45,31 @@
#include <asm/ucc.h>
#include "gianfar.h"
#include "fsl_pq_mdio.h"
#define MIIMIND_BUSY 0x00000001
#define MIIMIND_NOTVALID 0x00000004
#define MIIMCFG_INIT_VALUE 0x00000007
#define MIIMCFG_RESET 0x80000000
#define MII_READ_COMMAND 0x00000001
struct fsl_pq_mdio {
u8 res1[16];
u32 ieventm; /* MDIO Interrupt event register (for etsec2)*/
u32 imaskm; /* MDIO Interrupt mask register (for etsec2)*/
u8 res2[4];
u32 emapm; /* MDIO Event mapping register (for etsec2)*/
u8 res3[1280];
u32 miimcfg; /* MII management configuration reg */
u32 miimcom; /* MII management command reg */
u32 miimadd; /* MII management address reg */
u32 miimcon; /* MII management control reg */
u32 miimstat; /* MII management status reg */
u32 miimind; /* MII management indication reg */
u8 res4[28];
u32 utbipar; /* TBI phy address reg (only on UCC) */
u8 res5[2728];
} __packed;
/* Number of microseconds to wait for an MII register to respond */
#define MII_TIMEOUT 1000
......@@ -64,7 +88,7 @@ struct fsl_pq_mdio_priv {
* the local mdio pins, which may not be the same as system mdio bus, used for
* controlling the external PHYs, for example.
*/
int fsl_pq_local_mdio_write(struct fsl_pq_mdio __iomem *regs, int mii_id,
static int fsl_pq_local_mdio_write(struct fsl_pq_mdio __iomem *regs, int mii_id,
int regnum, u16 value)
{
u32 status;
......@@ -92,7 +116,7 @@ int fsl_pq_local_mdio_write(struct fsl_pq_mdio __iomem *regs, int mii_id,
* and are always tied to the local mdio pins, which may not be the
* same as system mdio bus, used for controlling the external PHYs, for eg.
*/
int fsl_pq_local_mdio_read(struct fsl_pq_mdio __iomem *regs,
static int fsl_pq_local_mdio_read(struct fsl_pq_mdio __iomem *regs,
int mii_id, int regnum)
{
u16 value;
......@@ -129,7 +153,8 @@ static struct fsl_pq_mdio __iomem *fsl_pq_mdio_get_regs(struct mii_bus *bus)
* Write value to the PHY at mii_id at register regnum,
* on the bus, waiting until the write is done before returning.
*/
int fsl_pq_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
static int fsl_pq_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
u16 value)
{
struct fsl_pq_mdio __iomem *regs = fsl_pq_mdio_get_regs(bus);
......@@ -141,7 +166,7 @@ int fsl_pq_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
* Read the bus for PHY at addr mii_id, register regnum, and
* return the value. Clears miimcom first.
*/
int fsl_pq_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
static int fsl_pq_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
{
struct fsl_pq_mdio __iomem *regs = fsl_pq_mdio_get_regs(bus);
......@@ -178,7 +203,7 @@ static int fsl_pq_mdio_reset(struct mii_bus *bus)
return 0;
}
void fsl_pq_mdio_bus_name(char *name, struct device_node *np)
static void fsl_pq_mdio_bus_name(char *name, struct device_node *np)
{
const u32 *addr;
u64 taddr = OF_BAD_ADDR;
......@@ -190,7 +215,6 @@ void fsl_pq_mdio_bus_name(char *name, struct device_node *np)
snprintf(name, MII_BUS_ID_SIZE, "%s@%llx", np->name,
(unsigned long long)taddr);
}
EXPORT_SYMBOL_GPL(fsl_pq_mdio_bus_name);
static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs, struct device_node *np)
......
/*
* Freescale PowerQUICC MDIO Driver -- MII Management Bus Implementation
* Driver for the MDIO bus controller on Freescale PowerQUICC processors
*
* Author: Andy Fleming
* Modifier: Sandeep Gopalpet
*
* Copyright 2002-2004, 2008-2009 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifndef __FSL_PQ_MDIO_H
#define __FSL_PQ_MDIO_H
#define MIIMIND_BUSY 0x00000001
#define MIIMIND_NOTVALID 0x00000004
#define MIIMCFG_INIT_VALUE 0x00000007
#define MIIMCFG_RESET 0x80000000
#define MII_READ_COMMAND 0x00000001
struct fsl_pq_mdio {
u8 res1[16];
u32 ieventm; /* MDIO Interrupt event register (for etsec2)*/
u32 imaskm; /* MDIO Interrupt mask register (for etsec2)*/
u8 res2[4];
u32 emapm; /* MDIO Event mapping register (for etsec2)*/
u8 res3[1280];
u32 miimcfg; /* MII management configuration reg */
u32 miimcom; /* MII management command reg */
u32 miimadd; /* MII management address reg */
u32 miimcon; /* MII management control reg */
u32 miimstat; /* MII management status reg */
u32 miimind; /* MII management indication reg */
u8 reserved[28]; /* Space holder */
u32 utbipar; /* TBI phy address reg (only on UCC) */
u8 res4[2728];
} __packed;
int fsl_pq_mdio_read(struct mii_bus *bus, int mii_id, int regnum);
int fsl_pq_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value);
int fsl_pq_local_mdio_write(struct fsl_pq_mdio __iomem *regs, int mii_id,
int regnum, u16 value);
int fsl_pq_local_mdio_read(struct fsl_pq_mdio __iomem *regs, int mii_id, int regnum);
int __init fsl_pq_mdio_init(void);
void fsl_pq_mdio_exit(void);
void fsl_pq_mdio_bus_name(char *name, struct device_node *np);
#endif /* FSL_PQ_MDIO_H */
......@@ -100,7 +100,6 @@
#include <linux/of_net.h>
#include "gianfar.h"
#include "fsl_pq_mdio.h"
#define TX_TIMEOUT (1*HZ)
......
......@@ -42,7 +42,6 @@
#include <asm/machdep.h>
#include "ucc_geth.h"
#include "fsl_pq_mdio.h"
#undef DEBUG
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册