iio: mxs-lradc: fix divider

All channels' single measurement are happening on CH 0. So enabling / disabling
the divider once is not enough, because it has impact on all channels.

Set only a flag, then check this on each measurement, and enable / disable the
divider as required.
Signed-off-by: NRobert Hodaszi <robert.hodaszi@digi.com>
Cc: Stable@vger.kernel.org
Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

drivers/staging/iio/adc/mxs-lradc.c

@@ -846,6 +846,14 @@ static int mxs_lradc_read_single(struct iio_dev *iio_dev, int chan, int *val)
 			LRADC_CTRL1);
 	mxs_lradc_reg_clear(lradc, 0xff, LRADC_CTRL0);
 
+	/* Enable / disable the divider per requirement */
+	if (test_bit(chan, &lradc->is_divided))
+		mxs_lradc_reg_set(lradc, 1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET,
+			LRADC_CTRL2);
+	else
+		mxs_lradc_reg_clear(lradc,
+			1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET, LRADC_CTRL2);
+
 	/* Clean the slot's previous content, then set new one. */
 	mxs_lradc_reg_clear(lradc, LRADC_CTRL4_LRADCSELECT_MASK(0),
 			LRADC_CTRL4);
@@ -961,15 +969,11 @@ static int mxs_lradc_write_raw(struct iio_dev *iio_dev,
 		if (val == scale_avail[MXS_LRADC_DIV_DISABLED].integer &&
 		    val2 == scale_avail[MXS_LRADC_DIV_DISABLED].nano) {
 			/* divider by two disabled */
-			writel(1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET,
-			       lradc->base + LRADC_CTRL2 + STMP_OFFSET_REG_CLR);
 			clear_bit(chan->channel, &lradc->is_divided);
 			ret = 0;
 		} else if (val == scale_avail[MXS_LRADC_DIV_ENABLED].integer &&
 			   val2 == scale_avail[MXS_LRADC_DIV_ENABLED].nano) {
 			/* divider by two enabled */
-			writel(1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET,
-			       lradc->base + LRADC_CTRL2 + STMP_OFFSET_REG_SET);
 			set_bit(chan->channel, &lradc->is_divided);
 			ret = 0;
 		}