Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 19530313 编写于 作者: L Linus Torvalds
浏览文件
操作

Merge tag 'kconfig-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild 

Pull Kconfig file consolidation from Masahiro Yamada:
 "Consolidation of bus (PCI, PCMCIA, EISA, RapidIO) config entries by
  Christoph Hellwig.

  Currently, every architecture that wants to provide common peripheral
  busses needs to add some boilerplate code and include the right
  Kconfig files. This series instead just selects the presence (when
  needed) and then handles everything in the bus-specific Kconfig file
  under drivers/"

* tag 'kconfig-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  pcmcia: remove per-arch PCMCIA config entry
  eisa: consolidate EISA Kconfig entry in drivers/eisa
  rapidio: consolidate RAPIDIO config entry in drivers/rapidio
  pcmcia: allow PCMCIA support independent of the architecture
  PCI: consolidate the PCI_SYSCALL symbol
  PCI: consolidate the PCI_DOMAINS and PCI_DOMAINS_GENERIC config options
  PCI: consolidate PCI config entry in drivers/pci
  MIPS: remove the HT_PCI config option
上级 769e4709 5cfc879c
隐藏空白更改
内联 并排
Showing with 287 addition and 641 deletion
arch/alpha/Kconfig
浏览文件 @ 19530313
......@@ -7,6 +7,9 @@ config ALPHA
select ARCH_NO_PREEMPT
select ARCH_NO_SG_CHAIN
select ARCH_USE_CMPXCHG_LOCKREF
select FORCE_PCI if !ALPHA_JENSEN
select PCI_DOMAINS if PCI
select PCI_SYSCALL if PCI
select HAVE_AOUT
select HAVE_IDE
select HAVE_OPROFILE
......@@ -16,6 +19,7 @@ config ALPHA
select NEED_SG_DMA_LENGTH
select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select GENERIC_PCI_IOMAP if PCI
select AUTO_IRQ_AFFINITY if SMP
select GENERIC_IRQ_SHOW
select ARCH_WANT_IPC_PARSE_VERSION
......@@ -126,11 +130,13 @@ choice
config ALPHA_GENERIC
bool "Generic"
depends on TTY
select HAVE_EISA
help
A generic kernel will run on all supported Alpha hardware.
config ALPHA_ALCOR
bool "Alcor/Alpha-XLT"
select HAVE_EISA
help
For systems using the Digital ALCOR chipset: 5 chips (4, 64-bit data
slices (Data Switch, DSW) - 208-pin PQFP and 1 control (Control, I/O
......@@ -203,6 +209,7 @@ config ALPHA_EIGER
config ALPHA_JENSEN
bool "Jensen"
depends on BROKEN
select HAVE_EISA
help
DEC PC 150 AXP (aka Jensen): This is a very old Digital system - one
of the first-generation Alpha systems. A number of these systems
......@@ -219,6 +226,7 @@ config ALPHA_LX164
config ALPHA_LYNX
bool "Lynx"
select HAVE_EISA
help
AlphaServer 2100A-based systems.
......@@ -229,6 +237,7 @@ config ALPHA_MARVEL
config ALPHA_MIATA
bool "Miata"
select HAVE_EISA
help
The Digital PersonalWorkStation (PWS 433a, 433au, 500a, 500au, 600a,
or 600au).
......@@ -248,6 +257,7 @@ config ALPHA_NONAME_CH
config ALPHA_NORITAKE
bool "Noritake"
select HAVE_EISA
help
AlphaServer 1000A, AlphaServer 600A, and AlphaServer 800-based
systems.
......@@ -260,6 +270,7 @@ config ALPHA_P2K
config ALPHA_RAWHIDE
bool "Rawhide"
select HAVE_EISA
help
AlphaServer 1200, AlphaServer 4000 and AlphaServer 4100 machines.
See HOWTO at
......@@ -279,6 +290,7 @@ config ALPHA_SX164
config ALPHA_SABLE
bool "Sable"
select HAVE_EISA
help
Digital AlphaServer 2000 and 2100-based systems.
......@@ -319,24 +331,6 @@ config ISA_DMA_API
bool
default y
config PCI
bool
depends on !ALPHA_JENSEN
select GENERIC_PCI_IOMAP
default y
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
VESA. If you have PCI, say Y, otherwise N.
config PCI_DOMAINS
bool
default y
config PCI_SYSCALL
def_bool PCI
config ALPHA_NONAME
bool
depends on ALPHA_BOOK1 || ALPHA_NONAME_CH
......@@ -526,11 +520,6 @@ config ALPHA_SRM
If unsure, say N.
config EISA
bool
depends on ALPHA_GENERIC || ALPHA_JENSEN || ALPHA_ALCOR || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_RAWHIDE
default y
config ARCH_MAY_HAVE_PC_FDC
def_bool y
......@@ -681,11 +670,6 @@ config HZ
default 1200 if HZ_1200
default 1024
source "drivers/pci/Kconfig"
source "drivers/eisa/Kconfig"
source "drivers/pcmcia/Kconfig"
config SRM_ENV
tristate "SRM environment through procfs"
depends on PROC_FS
......
arch/arc/Kconfig
浏览文件 @ 19530313
......@@ -45,14 +45,12 @@ config ARC
select OF
select OF_EARLY_FLATTREE
select OF_RESERVED_MEM
select PCI_SYSCALL if PCI
select PERF_USE_VMALLOC if ARC_CACHE_VIPT_ALIASING
config ARCH_HAS_CACHE_LINE_SIZE
def_bool y
config MIGHT_HAVE_PCI
bool
config TRACE_IRQFLAGS_SUPPORT
def_bool y
......@@ -541,24 +539,4 @@ config FORCE_MAX_ZONEORDER
default "12" if ARC_HUGEPAGE_16M
default "11"
menu "Bus Support"
config PCI
bool "PCI support" if MIGHT_HAVE_PCI
help
PCI is the name of a bus system, i.e., the way the CPU talks to
the other stuff inside your box. Find out if your board/platform
has PCI.
Note: PCIe support for Synopsys Device will be available only
when HAPS DX is configured with PCIe RC bitmap. If you have PCI,
say Y, otherwise N.
config PCI_SYSCALL
def_bool PCI
source "drivers/pci/Kconfig"
endmenu
source "kernel/power/Kconfig"
arch/arc/plat-axs10x/Kconfig
浏览文件 @ 19530313
......@@ -11,7 +11,7 @@ menuconfig ARC_PLAT_AXS10X
select DW_APB_ICTL
select GPIO_DWAPB
select OF_GPIO
select MIGHT_HAVE_PCI
select HAVE_PCI
select GENERIC_IRQ_CHIP
select GPIOLIB
select AXS101 if ISA_ARCOMPACT
......
arch/arc/plat-hsdk/Kconfig
浏览文件 @ 19530313
......@@ -11,4 +11,4 @@ menuconfig ARC_SOC_HSDK
select ARC_HAS_ACCL_REGS
select CLK_HSDK
select RESET_HSDK
select MIGHT_HAVE_PCI
select HAVE_PCI
arch/arm/Kconfig
浏览文件 @ 19530313
......@@ -104,6 +104,7 @@ config ARM
select OF_RESERVED_MEM if OF
select OLD_SIGACTION
select OLD_SIGSUSPEND3
select PCI_SYSCALL if PCI
select PERF_USE_VMALLOC
select REFCOUNT_FULL
select RTC_LIB
......@@ -147,9 +148,6 @@ config ARM_DMA_IOMMU_ALIGNMENT
endif
config MIGHT_HAVE_PCI
bool
config SYS_SUPPORTS_APM_EMULATION
bool
......@@ -163,21 +161,6 @@ config HAVE_PROC_CPU
config NO_IOPORT_MAP
bool
config EISA
bool
---help---
The Extended Industry Standard Architecture (EISA) bus was
developed as an open alternative to the IBM MicroChannel bus.
The EISA bus provided some of the features of the IBM MicroChannel
bus while maintaining backward compatibility with cards made for
the older ISA bus. The EISA bus saw limited use between 1988 and
1995 when it was made obsolete by the PCI bus.
Say Y here if you are building a kernel for an EISA-based machine.
Otherwise, say N.
config SBUS
bool
......@@ -333,8 +316,8 @@ config ARCH_MULTIPLATFORM
select COMMON_CLK
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_MULTI_HANDLER
select MIGHT_HAVE_PCI
select PCI_DOMAINS if PCI
select HAVE_PCI
select PCI_DOMAINS_GENERIC if PCI
select SPARSE_IRQ
select USE_OF
......@@ -407,7 +390,7 @@ config ARCH_IOP13XX
select CPU_XSC3
select NEED_MACH_MEMORY_H
select NEED_RET_TO_USER
select PCI
select FORCE_PCI
select PLAT_IOP
select VMSPLIT_1G
select SPARSE_IRQ
......@@ -421,7 +404,7 @@ config ARCH_IOP32X
select GPIO_IOP
select GPIOLIB
select NEED_RET_TO_USER
select PCI
select FORCE_PCI
select PLAT_IOP
help
Support for Intel's 80219 and IOP32X (XScale) family of
......@@ -434,7 +417,7 @@ config ARCH_IOP33X
select GPIO_IOP
select GPIOLIB
select NEED_RET_TO_USER
select PCI
select FORCE_PCI
select PLAT_IOP
help
Support for Intel's IOP33X (XScale) family of processors.
......@@ -449,7 +432,7 @@ config ARCH_IXP4XX
select DMABOUNCE if PCI
select GENERIC_CLOCKEVENTS
select GPIOLIB
select MIGHT_HAVE_PCI
select HAVE_PCI
select NEED_MACH_IO_H
select USB_EHCI_BIG_ENDIAN_DESC
select USB_EHCI_BIG_ENDIAN_MMIO
......@@ -462,7 +445,7 @@ config ARCH_DOVE
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_MULTI_HANDLER
select GPIOLIB
select MIGHT_HAVE_PCI
select HAVE_PCI
select MVEBU_MBUS
select PINCTRL
select PINCTRL_DOVE
......@@ -1230,46 +1213,18 @@ config ISA_DMA
config ISA_DMA_API
bool
config PCI
bool "PCI support" if MIGHT_HAVE_PCI
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
VESA. If you have PCI, say Y, otherwise N.
config PCI_DOMAINS
bool "Support for multiple PCI domains"
depends on PCI
help
Enable PCI domains kernel management. Say Y if your machine
has a PCI bus hierarchy that requires more than one PCI
domain (aka segment) to be correctly managed. Say N otherwise.
If you don't know what to do here, say N.
config PCI_DOMAINS_GENERIC
def_bool PCI_DOMAINS
config PCI_NANOENGINE
bool "BSE nanoEngine PCI support"
depends on SA1100_NANOENGINE
help
Enable PCI on the BSE nanoEngine board.
config PCI_SYSCALL
def_bool PCI
config PCI_HOST_ITE8152
bool
depends on PCI && MACH_ARMCORE
default y
select DMABOUNCE
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
endmenu
menu "Kernel Features"
......
arch/arm/mach-alpine/Kconfig
浏览文件 @ 19530313
......@@ -9,7 +9,7 @@ config ARCH_ALPINE
select HAVE_ARM_ARCH_TIMER
select HAVE_SMP
select MFD_SYSCON
select PCI
select FORCE_PCI
select PCI_HOST_GENERIC
help
This enables support for the Annapurna Labs Alpine V1 boards.
arch/arm/mach-bcm/Kconfig
浏览文件 @ 19530313
......@@ -20,7 +20,7 @@ config ARCH_BCM_IPROC
select GPIOLIB
select ARM_AMBA
select PINCTRL
select PCI_DOMAINS if PCI
select PCI_DOMAINS_GENERIC if PCI
help
This enables support for systems based on Broadcom IPROC architected SoCs.
The IPROC complex contains one or more ARM CPUs along with common
......
arch/arm/mach-footbridge/Kconfig
浏览文件 @ 19530313
......@@ -9,7 +9,7 @@ config ARCH_CATS
select FOOTBRIDGE_HOST
select ISA
select ISA_DMA
select PCI
select FORCE_PCI
help
Say Y here if you intend to run this kernel on the CATS.
......@@ -20,7 +20,7 @@ config ARCH_PERSONAL_SERVER
select FOOTBRIDGE_HOST
select ISA
select ISA_DMA
select PCI
select FORCE_PCI
---help---
Say Y here if you intend to run this kernel on the Compaq
Personal Server.
......@@ -53,7 +53,7 @@ config ARCH_EBSA285_HOST
select ISA
select ISA_DMA
select ARCH_MAY_HAVE_PC_FDC
select PCI
select FORCE_PCI
help
Say Y here if you intend to run this kernel on the EBSA285 card
in host ("central function") mode.
......@@ -67,7 +67,7 @@ config ARCH_NETWINDER
select FOOTBRIDGE_HOST
select ISA
select ISA_DMA
select PCI
select FORCE_PCI
help
Say Y here if you intend to run this kernel on the Rebel.COM
NetWinder. Information about this machine can be found at:
......
arch/arm/mach-ixp4xx/Kconfig
浏览文件 @ 19530313
......@@ -7,7 +7,7 @@ comment "IXP4xx Platforms"
config MACH_NSLU2
bool
prompt "Linksys NSLU2"
select PCI
select FORCE_PCI
help
Say 'Y' here if you want your kernel to support Linksys's
NSLU2 NAS device. For more information on this platform,
......@@ -15,7 +15,7 @@ config MACH_NSLU2
config MACH_AVILA
bool "Avila"
select PCI
select FORCE_PCI
help
Say 'Y' here if you want your kernel to support the Gateworks
Avila Network Platform. For more information on this platform,
......@@ -31,7 +31,7 @@ config MACH_LOFT
config ARCH_ADI_COYOTE
bool "Coyote"
select PCI
select FORCE_PCI
help
Say 'Y' here if you want your kernel to support the ADI
Engineering Coyote Gateway Reference Platform. For more
......@@ -39,7 +39,7 @@ config ARCH_ADI_COYOTE
config MACH_GATEWAY7001
bool "Gateway 7001"
select PCI
select FORCE_PCI
help
Say 'Y' here if you want your kernel to support Gateway's
7001 Access Point. For more information on this platform,
......@@ -47,7 +47,7 @@ config MACH_GATEWAY7001
config MACH_WG302V2
bool "Netgear WG302 v2 / WAG302 v2"
select PCI
select FORCE_PCI
help
Say 'Y' here if you want your kernel to support Netgear's
WG302 v2 or WAG302 v2 Access Points. For more information
......@@ -107,7 +107,7 @@ config ARCH_PRPMC1100
config MACH_NAS100D
bool
prompt "NAS100D"
select PCI
select FORCE_PCI
help
Say 'Y' here if you want your kernel to support Iomega's
NAS 100d device. For more information on this platform,
......@@ -116,7 +116,7 @@ config MACH_NAS100D
config MACH_DSMG600
bool
prompt "D-Link DSM-G600 RevA"
select PCI
select FORCE_PCI
help
Say 'Y' here if you want your kernel to support D-Link's
DSM-G600 RevA device. For more information on this platform,
......@@ -130,7 +130,7 @@ config ARCH_IXDP4XX
config MACH_FSG
bool
prompt "Freecom FSG-3"
select PCI
select FORCE_PCI
help
Say 'Y' here if you want your kernel to support Freecom's
FSG-3 device. For more information on this platform,
......@@ -139,7 +139,7 @@ config MACH_FSG
config MACH_ARCOM_VULCAN
bool
prompt "Arcom/Eurotech Vulcan"
select PCI
select FORCE_PCI
help
Say 'Y' here if you want your kernel to support Arcom's
Vulcan board.
......@@ -160,7 +160,7 @@ config CPU_IXP43X
config MACH_GTWX5715
bool "Gemtek WX5715 (Linksys WRV54G)"
depends on ARCH_IXP4XX
select PCI
select FORCE_PCI
help
This board is currently inside the Linksys WRV54G Gateways.
......@@ -183,7 +183,7 @@ config MACH_DEVIXP
config MACH_MICCPT
bool "Omicron MICCPT"
select PCI
select FORCE_PCI
help
Say 'Y' here if you want your kernel to support the MICCPT
board from OMICRON electronics GmbH.
......
arch/arm/mach-ks8695/Kconfig
浏览文件 @ 19530313
......@@ -4,7 +4,7 @@ menu "Kendin/Micrel KS8695 Implementations"
config MACH_KS8695
bool "KS8695 development board"
select MIGHT_HAVE_PCI
select HAVE_PCI
help
Say 'Y' here if you want your kernel to run on the original
Kendin-Micrel KS8695 development board.
......@@ -52,7 +52,7 @@ config MACH_CM4002
config MACH_CM4008
bool "OpenGear CM4008"
select MIGHT_HAVE_PCI
select HAVE_PCI
help
Say 'Y' here if you want your kernel to support the OpenGear
CM4008 Console Server. See http://www.opengear.com for more
......@@ -60,7 +60,7 @@ config MACH_CM4008
config MACH_CM41xx
bool "OpenGear CM41xx"
select MIGHT_HAVE_PCI
select HAVE_PCI
help
Say 'Y' here if you want your kernel to support the OpenGear
CM4016 or CM4048 Console Servers. See http://www.opengear.com for
......@@ -68,7 +68,7 @@ config MACH_CM41xx
config MACH_IM4004
bool "OpenGear IM4004"
select MIGHT_HAVE_PCI
select HAVE_PCI
help
Say 'Y' here if you want your kernel to support the OpenGear
IM4004 Secure Access Server. See http://www.opengear.com for
......@@ -76,7 +76,7 @@ config MACH_IM4004
config MACH_IM42xx
bool "OpenGear IM42xx"
select MIGHT_HAVE_PCI
select HAVE_PCI
help
Say 'Y' here if you want your kernel to support the OpenGear
IM4216 or IM4248 Console Servers. See http://www.opengear.com for
......
arch/arm/mach-mv78xx0/Kconfig
浏览文件 @ 19530313
......@@ -4,7 +4,7 @@ menuconfig ARCH_MV78XX0
select CPU_FEROCEON
select GPIOLIB
select MVEBU_MBUS
select PCI
select FORCE_PCI
select PLAT_ORION_LEGACY
help
Support for the following Marvell MV78xx0 series SoCs:
......
arch/arm/mach-mvebu/Kconfig
浏览文件 @ 19530313
......@@ -124,7 +124,7 @@ config MACH_KIRKWOOD
select MACH_MVEBU_ANY
select ORION_IRQCHIP
select ORION_TIMER
select PCI
select FORCE_PCI
select PCI_QUIRKS
select PINCTRL_KIRKWOOD
help
......
arch/arm/mach-orion5x/Kconfig
浏览文件 @ 19530313
......@@ -5,7 +5,7 @@ menuconfig ARCH_ORION5X
select GENERIC_CLOCKEVENTS
select GPIOLIB
select MVEBU_MBUS
select PCI
select FORCE_PCI
select PHYLIB if NETDEVICES
select PLAT_ORION_LEGACY
help
......
arch/arm/mach-pxa/Kconfig
浏览文件 @ 19530313
......@@ -125,7 +125,7 @@ config MACH_ARMCORE
bool "CompuLab CM-X255/CM-X270 modules"
select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
select IWMMXT
select MIGHT_HAVE_PCI
select HAVE_PCI
select NEED_MACH_IO_H if PCI
select PXA25x
select PXA27x
......
arch/arm/mach-sa1100/Kconfig
浏览文件 @ 19530313
......@@ -120,7 +120,7 @@ config SA1100_LART
config SA1100_NANOENGINE
bool "nanoEngine"
select ARM_SA1110_CPUFREQ
select PCI
select FORCE_PCI
select PCI_NANOENGINE
help
Say Y here if you are using the Bright Star Engineering nanoEngine.
......
arch/arm/mach-socfpga/Kconfig
浏览文件 @ 19530313
......@@ -10,7 +10,7 @@ menuconfig ARCH_SOCFPGA
select HAVE_ARM_SCU
select HAVE_ARM_TWD if SMP
select MFD_SYSCON
select PCI_DOMAINS if PCI
select PCI_DOMAINS_GENERIC if PCI
if ARCH_SOCFPGA
config SOCFPGA_SUSPEND
......
arch/arm64/Kconfig
浏览文件 @ 19530313
......@@ -102,6 +102,7 @@ config ARM64
select GENERIC_TIME_VSYSCALL
select HANDLE_DOMAIN_IRQ
select HARDIRQS_SW_RESEND
select HAVE_PCI
select HAVE_ACPI_APEI if (ACPI && EFI)
select HAVE_ALIGNED_STRUCT_PAGE if SLUB
select HAVE_ARCH_AUDITSYSCALL
......@@ -163,7 +164,9 @@ config ARM64
select OF
select OF_EARLY_FLATTREE
select OF_RESERVED_MEM
select PCI_DOMAINS_GENERIC if PCI
select PCI_ECAM if (ACPI && PCI)
select PCI_SYSCALL if PCI
select POWER_RESET
select POWER_SUPPLY
select REFCOUNT_FULL
......@@ -290,28 +293,6 @@ config ARCH_PROC_KCORE_TEXT
source "arch/arm64/Kconfig.platforms"
menu "Bus support"
config PCI
bool "PCI support"
help
This feature enables support for PCI bus system. If you say Y
here, the kernel will include drivers and infrastructure code
to support PCI bus devices.
config PCI_DOMAINS
def_bool PCI
config PCI_DOMAINS_GENERIC
def_bool PCI
config PCI_SYSCALL
def_bool PCI
source "drivers/pci/Kconfig"
endmenu
menu "Kernel Features"
menu "ARM errata workarounds via the alternatives framework"
......
arch/hexagon/Kconfig
浏览文件 @ 19530313
......@@ -46,9 +46,6 @@ config FRAME_POINTER
config LOCKDEP_SUPPORT
def_bool y
config PCI
def_bool n
config EARLY_PRINTK
def_bool y
......
arch/ia64/Kconfig
浏览文件 @ 19530313
......@@ -10,11 +10,13 @@ config IA64
bool
select ARCH_MIGHT_HAVE_PC_PARPORT
select ARCH_MIGHT_HAVE_PC_SERIO
select PCI if (!IA64_HP_SIM)
select ACPI if (!IA64_HP_SIM)
select ARCH_SUPPORTS_ACPI if (!IA64_HP_SIM)
select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI
select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI
select FORCE_PCI if (!IA64_HP_SIM)
select PCI_DOMAINS if PCI
select PCI_SYSCALL if PCI
select HAVE_UNSTABLE_SCHED_CLOCK
select HAVE_EXIT_THREAD
select HAVE_IDE
......@@ -540,30 +542,6 @@ endif
endmenu
if !IA64_HP_SIM
menu "Bus options (PCI, PCMCIA)"
config PCI
bool "PCI support"
help
Real IA-64 machines all have PCI/PCI-X/PCI Express busses. Say Y
here unless you are using a simulator without PCI support.
config PCI_DOMAINS
def_bool PCI
config PCI_SYSCALL
def_bool PCI
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
endmenu
endif
source "arch/ia64/hp/sim/Kconfig"
config MSPEC
......
arch/m68k/Kconfig.bus
浏览文件 @ 19530313
......@@ -63,22 +63,9 @@ source "drivers/zorro/Kconfig"
endif
config PCI
bool "PCI support"
depends on M54xx
help
Enable the PCI bus. Support for the PCI bus hardware built into the
ColdFire 547x and 548x processors.
if PCI
source "drivers/pci/Kconfig"
endif
if !MMU
config ISA_DMA_API
def_bool !M5272
source "drivers/pcmcia/Kconfig"
endif
arch/m68k/Kconfig.cpu
浏览文件 @ 19530313
......@@ -299,6 +299,7 @@ config M53xx
bool
config M54xx
select HAVE_PCI
bool
endif # COLDFIRE
......
arch/microblaze/Kconfig
浏览文件 @ 19530313
......@@ -29,11 +29,14 @@ config MICROBLAZE
select HAVE_FUNCTION_TRACER
select HAVE_MEMBLOCK_NODE_MAP
select HAVE_OPROFILE
select HAVE_PCI
select IRQ_DOMAIN
select XILINX_INTC
select MODULES_USE_ELF_RELA
select OF
select OF_EARLY_FLATTREE
select PCI_DOMAINS_GENERIC if PCI
select PCI_SYSCALL if PCI
select TRACING_SUPPORT
select VIRT_TO_BUS
select CPU_NO_EFFICIENT_FFS
......@@ -265,22 +268,8 @@ endmenu
menu "Bus Options"
config PCI
bool "PCI support"
config PCI_DOMAINS
def_bool PCI
config PCI_DOMAINS_GENERIC
def_bool PCI_DOMAINS
config PCI_SYSCALL
def_bool PCI
config PCI_XILINX
bool "Xilinx PCI host bridge support"
depends on PCI
source "drivers/pci/Kconfig"
endmenu
arch/mips/Kconfig
浏览文件 @ 19530313
......@@ -25,6 +25,7 @@ config MIPS
select GENERIC_IOMAP
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select GENERIC_ISA_DMA if EISA
select GENERIC_LIB_ASHLDI3
select GENERIC_LIB_ASHRDI3
select GENERIC_LIB_CMPDI2
......@@ -74,6 +75,7 @@ config MIPS
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_VIRT_CPU_ACCOUNTING_GEN if 64BIT || !SMP
select IRQ_FORCED_THREADING
select ISA if EISA
select MODULES_USE_ELF_RELA if MODULES && 64BIT
select MODULES_USE_ELF_REL if MODULES
select PERF_USE_VMALLOC
......@@ -98,7 +100,7 @@ config MIPS_GENERIC
select CPU_MIPSR2_IRQ_EI
select CSRC_R4K
select DMA_PERDEV_COHERENT
select HW_HAS_PCI
select HAVE_PCI
select IRQ_MIPS_CPU
select LIBFDT
select MIPS_AUTO_PFN_OFFSET
......@@ -259,7 +261,7 @@ config BCM47XX
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
select HW_HAS_PCI
select HAVE_PCI
select IRQ_MIPS_CPU
select SYS_HAS_CPU_MIPS32_R1
select NO_EXCEPT_FILL
......@@ -302,13 +304,12 @@ config MIPS_COBALT
select CSRC_R4K
select CEVT_GT641XX
select DMA_NONCOHERENT
select HW_HAS_PCI
select FORCE_PCI
select I8253
select I8259
select IRQ_MIPS_CPU
select IRQ_GT641XX
select PCI_GT64XXX_PCI0
select PCI
select SYS_HAS_CPU_NEVADA
select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
......@@ -425,7 +426,7 @@ config LASAT
select CSRC_R4K
select DMA_NONCOHERENT
select SYS_HAS_EARLY_PRINTK
select HW_HAS_PCI
select HAVE_PCI
select IRQ_MIPS_CPU
select PCI_GT64XXX_PCI0
select MIPS_NILE4
......@@ -503,7 +504,7 @@ config MIPS_MALTA
select DMA_MAYBE_COHERENT
select GENERIC_ISA_DMA
select HAVE_PCSPKR_PLATFORM
select HW_HAS_PCI
select HAVE_PCI
select I8253
select I8259
select IRQ_MIPS_CPU
......@@ -557,7 +558,7 @@ config MACH_PIC32
config NEC_MARKEINS
bool "NEC EMMA2RH Mark-eins board"
select SOC_EMMA2RH
select HW_HAS_PCI
select HAVE_PCI
help
This enables support for the NEC Electronics Mark-eins boards.
......@@ -634,7 +635,7 @@ config SGI_IP22
select CSRC_R4K
select DEFAULT_SGI_PARTITION
select DMA_NONCOHERENT
select HW_HAS_EISA
select HAVE_EISA
select I8253
select I8259
select IP22_CPU_SCACHE
......@@ -674,7 +675,7 @@ config SGI_IP27
select BOOT_ELF64
select DEFAULT_SGI_PARTITION
select SYS_HAS_EARLY_PRINTK
select HW_HAS_PCI
select HAVE_PCI
select NR_CPUS_DEFAULT_64
select SYS_HAS_CPU_R10000
select SYS_SUPPORTS_64BIT_KERNEL
......@@ -699,7 +700,7 @@ config SGI_IP28
select DMA_NONCOHERENT
select GENERIC_ISA_DMA_SUPPORT_BROKEN
select IRQ_MIPS_CPU
select HW_HAS_EISA
select HAVE_EISA
select I8253
select I8259
select SGI_HAS_I8042
......@@ -734,7 +735,7 @@ config SGI_IP32
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
select HW_HAS_PCI
select HAVE_PCI
select IRQ_MIPS_CPU
select R5000_CPU_SCACHE
select RM7000_CPU_SCACHE
......@@ -846,9 +847,9 @@ config SNI_RM
select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN
select DMA_NONCOHERENT
select GENERIC_ISA_DMA
select HAVE_EISA
select HAVE_PCSPKR_PLATFORM
select HW_HAS_EISA
select HW_HAS_PCI
select HAVE_PCI
select IRQ_MIPS_CPU
select I8253
select I8259
......@@ -881,7 +882,7 @@ config MIKROTIK_RB532
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
select HW_HAS_PCI
select HAVE_PCI
select IRQ_MIPS_CPU
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_32BIT_KERNEL
......@@ -898,7 +899,7 @@ config CAVIUM_OCTEON_SOC
bool "Cavium Networks Octeon SoC based boards"
select CEVT_R4K
select ARCH_HAS_PHYS_TO_DMA
select HAS_RAPIDIO
select HAVE_RAPIDIO
select PHYS_ADDR_T_64BIT
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
......@@ -908,7 +909,7 @@ config CAVIUM_OCTEON_SOC
select SYS_SUPPORTS_HOTPLUG_CPU if CPU_BIG_ENDIAN
select SYS_HAS_EARLY_PRINTK
select SYS_HAS_CPU_CAVIUM_OCTEON
select HW_HAS_PCI
select HAVE_PCI
select ZONE_DMA32
select HOLES_IN_ZONE
select GPIOLIB
......@@ -941,7 +942,7 @@ config NLM_XLR_BOARD
select NLM_COMMON
select SYS_HAS_CPU_XLR
select SYS_SUPPORTS_SMP
select HW_HAS_PCI
select HAVE_PCI
select SWAP_IO_SPACE
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
......@@ -967,7 +968,7 @@ config NLM_XLP_BOARD
select NLM_COMMON
select SYS_HAS_CPU_XLP
select SYS_SUPPORTS_SMP
select HW_HAS_PCI
select HAVE_PCI
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select PHYS_ADDR_T_64BIT
......@@ -1002,7 +1003,7 @@ config MIPS_PARAVIRT
select SYS_HAS_CPU_MIPS32_R2
select SYS_HAS_CPU_MIPS64_R2
select SYS_HAS_CPU_CAVIUM_OCTEON
select HW_HAS_PCI
select HAVE_PCI
select SWAP_IO_SPACE
help
This option supports guest running under ????
......@@ -3063,47 +3064,14 @@ config MIPS_AUTO_PFN_OFFSET
menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
config HW_HAS_EISA
bool
config HW_HAS_PCI
bool
config PCI
bool "Support for PCI controller"
depends on HW_HAS_PCI
select PCI_DOMAINS
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
your box. Other bus systems are ISA, EISA, or VESA. If you have PCI,
say Y, otherwise N.
config HT_PCI
bool "Support for HT-linked PCI"
default y
depends on CPU_LOONGSON3
select PCI
select PCI_DOMAINS
help
Loongson family machines use Hyper-Transport bus for inter-core
connection and device connection. The PCI bus is a subordinate
linked at HT. Choose Y for Loongson-3 based machines.
config PCI_DOMAINS
bool
config PCI_DOMAINS_GENERIC
bool
config PCI_DRIVERS_GENERIC
select PCI_DOMAINS_GENERIC if PCI_DOMAINS
select PCI_DOMAINS_GENERIC if PCI
bool
config PCI_DRIVERS_LEGACY
def_bool !PCI_DRIVERS_GENERIC
select NO_GENERIC_PCI_IOPORT_MAP
source "drivers/pci/Kconfig"
select PCI_DOMAINS if PCI
#
# ISA support is now enabled via select. Too many systems still have the one
......@@ -3113,26 +3081,6 @@ source "drivers/pci/Kconfig"
config ISA
bool
config EISA
bool "EISA support"
depends on HW_HAS_EISA
select ISA
select GENERIC_ISA_DMA
---help---
The Extended Industry Standard Architecture (EISA) bus was
developed as an open alternative to the IBM MicroChannel bus.
The EISA bus provided some of the features of the IBM MicroChannel
bus while maintaining backward compatibility with cards made for
the older ISA bus. The EISA bus saw limited use between 1988 and
1995 when it was made obsolete by the PCI bus.
Say Y here if you are building a kernel for an EISA-based machine.
Otherwise, say N.
source "drivers/eisa/Kconfig"
config TC
bool "TURBOchannel support"
depends on MACH_DECSTATION
......@@ -3176,21 +3124,6 @@ config ZONE_DMA
config ZONE_DMA32
bool
source "drivers/pcmcia/Kconfig"
config HAS_RAPIDIO
bool
default n
config RAPIDIO
tristate "RapidIO support"
depends on HAS_RAPIDIO || PCI
help
If you say Y here, the kernel will include drivers and
infrastructure code to support RapidIO interconnect devices.
source "drivers/rapidio/Kconfig"
endmenu
config TRAD_SIGNALS
......
arch/mips/alchemy/Kconfig
浏览文件 @ 19530313
......@@ -14,7 +14,7 @@ choice
config MIPS_MTX1
bool "4G Systems MTX-1 board"
select HW_HAS_PCI
select HAVE_PCI
select ALCHEMY_GPIOINT_AU1000
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
......@@ -22,7 +22,7 @@ config MIPS_MTX1
config MIPS_DB1XXX
bool "Alchemy DB1XXX / PB1XXX boards"
select GPIOLIB
select HW_HAS_PCI
select HAVE_PCI
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
help
......@@ -40,7 +40,7 @@ config MIPS_XXS1500
config MIPS_GPR
bool "Trapeze ITS GPR board"
select ALCHEMY_GPIOINT_AU1000
select HW_HAS_PCI
select HAVE_PCI
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
......
arch/mips/ath25/Kconfig
浏览文件 @ 19530313
......@@ -13,6 +13,5 @@ config PCI_AR2315
bool "Atheros AR2315 PCI controller support"
depends on SOC_AR2315
select ARCH_HAS_PHYS_TO_DMA
select HW_HAS_PCI
select PCI
select FORCE_PCI
default y
arch/mips/ath79/Kconfig
浏览文件 @ 19530313
......@@ -75,11 +75,11 @@ config ATH79_MACH_UBNT_XM
endmenu
config SOC_AR71XX
select HW_HAS_PCI
select HAVE_PCI
def_bool n
config SOC_AR724X
select HW_HAS_PCI
select HAVE_PCI
select PCI_AR724X if PCI
def_bool n
......@@ -90,12 +90,12 @@ config SOC_AR933X
def_bool n
config SOC_AR934X
select HW_HAS_PCI
select HAVE_PCI
select PCI_AR724X if PCI
def_bool n
config SOC_QCA955X
select HW_HAS_PCI
select HAVE_PCI
select PCI_AR724X if PCI
def_bool n
......
arch/mips/bcm63xx/Kconfig
浏览文件 @ 19530313
......@@ -5,17 +5,17 @@ menu "CPU support"
config BCM63XX_CPU_3368
bool "support 3368 CPU"
select SYS_HAS_CPU_BMIPS4350
select HW_HAS_PCI
select HAVE_PCI
config BCM63XX_CPU_6328
bool "support 6328 CPU"
select SYS_HAS_CPU_BMIPS4350
select HW_HAS_PCI
select HAVE_PCI
config BCM63XX_CPU_6338
bool "support 6338 CPU"
select SYS_HAS_CPU_BMIPS32_3300
select HW_HAS_PCI
select HAVE_PCI
config BCM63XX_CPU_6345
bool "support 6345 CPU"
......@@ -24,22 +24,22 @@ config BCM63XX_CPU_6345
config BCM63XX_CPU_6348
bool "support 6348 CPU"
select SYS_HAS_CPU_BMIPS32_3300
select HW_HAS_PCI
select HAVE_PCI
config BCM63XX_CPU_6358
bool "support 6358 CPU"
select SYS_HAS_CPU_BMIPS4350
select HW_HAS_PCI
select HAVE_PCI
config BCM63XX_CPU_6362
bool "support 6362 CPU"
select SYS_HAS_CPU_BMIPS4350
select HW_HAS_PCI
select HAVE_PCI
config BCM63XX_CPU_6368
bool "support 6368 CPU"
select SYS_HAS_CPU_BMIPS4350
select HW_HAS_PCI
select HAVE_PCI
endmenu
source "arch/mips/bcm63xx/boards/Kconfig"
arch/mips/include/asm/mach-loongson64/loongson.h
浏览文件 @ 19530313
......@@ -113,7 +113,7 @@ static inline void do_perfcnt_IRQ(void)
#define LOONGSON_PCICFG_SIZE 0x00000800 /* 2K */
#define LOONGSON_PCICFG_TOP (LOONGSON_PCICFG_BASE+LOONGSON_PCICFG_SIZE-1)
#if defined(CONFIG_HT_PCI)
#ifdef CONFIG_CPU_LOONGSON3
#define LOONGSON_PCIIO_BASE loongson_sysconf.pci_io_base
#else
#define LOONGSON_PCIIO_BASE 0x1fd00000
......
arch/mips/lantiq/Kconfig
浏览文件 @ 19530313
......@@ -19,7 +19,7 @@ config SOC_AMAZON_SE
config SOC_XWAY
bool "XWAY"
select SOC_TYPE_XWAY
select HW_HAS_PCI
select HAVE_PCI
select MFD_SYSCON
select MFD_CORE
......
arch/mips/loongson64/Kconfig
浏览文件 @ 19530313
......@@ -15,7 +15,7 @@ config LEMOTE_FULOONG2E
select DMA_NONCOHERENT
select BOOT_ELF32
select BOARD_SCACHE
select HW_HAS_PCI
select HAVE_PCI
select I8259
select ISA
select IRQ_MIPS_CPU
......@@ -46,7 +46,7 @@ config LEMOTE_MACH2F
select DMA_NONCOHERENT
select GENERIC_ISA_DMA_SUPPORT_BROKEN
select HAVE_CLK
select HW_HAS_PCI
select HAVE_PCI
select I8259
select IRQ_MIPS_CPU
select ISA
......@@ -74,9 +74,8 @@ config LOONGSON_MACH3X
select CSRC_R4K
select CEVT_R4K
select CPU_HAS_WB
select HW_HAS_PCI
select FORCE_PCI
select ISA
select HT_PCI
select I8259
select IRQ_MIPS_CPU
select NR_CPUS_DEFAULT_4
......
arch/mips/pmcs-msp71xx/Kconfig
浏览文件 @ 19530313
......@@ -6,25 +6,25 @@ choice
config PMC_MSP4200_EVAL
bool "PMC-Sierra MSP4200 Eval Board"
select IRQ_MSP_SLP
select HW_HAS_PCI
select HAVE_PCI
select MIPS_L1_CACHE_SHIFT_4
config PMC_MSP4200_GW
bool "PMC-Sierra MSP4200 VoIP Gateway"
select IRQ_MSP_SLP
select HW_HAS_PCI
select HAVE_PCI
config PMC_MSP7120_EVAL
bool "PMC-Sierra MSP7120 Eval Board"
select SYS_SUPPORTS_MULTITHREADING
select IRQ_MSP_CIC
select HW_HAS_PCI
select HAVE_PCI
config PMC_MSP7120_GW
bool "PMC-Sierra MSP7120 Residential Gateway"
select SYS_SUPPORTS_MULTITHREADING
select IRQ_MSP_CIC
select HW_HAS_PCI
select HAVE_PCI
select MSP_HAS_USB
select MSP_ETH
......@@ -32,7 +32,7 @@ config PMC_MSP7120_FPGA
bool "PMC-Sierra MSP7120 FPGA"
select SYS_SUPPORTS_MULTITHREADING
select IRQ_MSP_CIC
select HW_HAS_PCI
select HAVE_PCI
endchoice
......
arch/mips/ralink/Kconfig
浏览文件 @ 19530313
......@@ -27,18 +27,18 @@ choice
config SOC_RT288X
bool "RT288x"
select MIPS_L1_CACHE_SHIFT_4
select HW_HAS_PCI
select HAVE_PCI
config SOC_RT305X
bool "RT305x"
config SOC_RT3883
bool "RT3883"
select HW_HAS_PCI
select HAVE_PCI
config SOC_MT7620
bool "MT7620/8"
select HW_HAS_PCI
select HAVE_PCI
config SOC_MT7621
bool "MT7621"
......@@ -50,7 +50,7 @@ choice
select MIPS_GIC
select COMMON_CLK
select CLKSRC_MIPS_GIC
select HW_HAS_PCI
select HAVE_PCI
endchoice
choice
......
arch/mips/sibyte/Kconfig
浏览文件 @ 19530313
......@@ -3,7 +3,7 @@ config SIBYTE_SB1250
bool
select CEVT_SB1250
select CSRC_SB1250
select HW_HAS_PCI
select HAVE_PCI
select IRQ_MIPS_CPU
select SIBYTE_ENABLE_LDT_IF_PCI
select SIBYTE_HAS_ZBUS_PROFILING
......@@ -23,7 +23,7 @@ config SIBYTE_BCM1125
bool
select CEVT_SB1250
select CSRC_SB1250
select HW_HAS_PCI
select HAVE_PCI
select IRQ_MIPS_CPU
select SIBYTE_BCM112X
select SIBYTE_HAS_ZBUS_PROFILING
......@@ -33,7 +33,7 @@ config SIBYTE_BCM1125H
bool
select CEVT_SB1250
select CSRC_SB1250
select HW_HAS_PCI
select HAVE_PCI
select IRQ_MIPS_CPU
select SIBYTE_BCM112X
select SIBYTE_ENABLE_LDT_IF_PCI
......@@ -52,7 +52,7 @@ config SIBYTE_BCM1x80
bool
select CEVT_BCM1480
select CSRC_BCM1480
select HW_HAS_PCI
select HAVE_PCI
select IRQ_MIPS_CPU
select SIBYTE_HAS_ZBUS_PROFILING
select SIBYTE_SB1xxx_SOC
......@@ -62,7 +62,7 @@ config SIBYTE_BCM1x55
bool
select CEVT_BCM1480
select CSRC_BCM1480
select HW_HAS_PCI
select HAVE_PCI
select IRQ_MIPS_CPU
select SIBYTE_SB1xxx_SOC
select SIBYTE_HAS_ZBUS_PROFILING
......
arch/mips/txx9/Kconfig
浏览文件 @ 19530313
......@@ -59,7 +59,7 @@ config SOC_TX3927
bool
select CEVT_TXX9
select HAS_TXX9_SERIAL
select HW_HAS_PCI
select HAVE_PCI
select IRQ_TXX9
select GPIO_TXX9
......@@ -67,7 +67,7 @@ config SOC_TX4927
bool
select CEVT_TXX9
select HAS_TXX9_SERIAL
select HW_HAS_PCI
select HAVE_PCI
select IRQ_TXX9
select PCI_TX4927
select GPIO_TXX9
......@@ -77,7 +77,7 @@ config SOC_TX4938
bool
select CEVT_TXX9
select HAS_TXX9_SERIAL
select HW_HAS_PCI
select HAVE_PCI
select IRQ_TXX9
select PCI_TX4927
select GPIO_TXX9
......@@ -87,7 +87,7 @@ config SOC_TX4939
bool
select CEVT_TXX9
select HAS_TXX9_SERIAL
select HW_HAS_PCI
select HAVE_PCI
select PCI_TX4927
select HAS_TXX9_ACLC
......
arch/mips/vr41xx/Kconfig
浏览文件 @ 19530313
......@@ -30,7 +30,7 @@ config TANBAC_TB022X
select CSRC_R4K
select DMA_NONCOHERENT
select IRQ_MIPS_CPU
select HW_HAS_PCI
select HAVE_PCI
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
help
......@@ -46,7 +46,7 @@ config VICTOR_MPC30X
select CSRC_R4K
select DMA_NONCOHERENT
select IRQ_MIPS_CPU
select HW_HAS_PCI
select HAVE_PCI
select PCI_VR41XX
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
......@@ -57,7 +57,7 @@ config ZAO_CAPCELLA
select CSRC_R4K
select DMA_NONCOHERENT
select IRQ_MIPS_CPU
select HW_HAS_PCI
select HAVE_PCI
select PCI_VR41XX
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
......@@ -99,6 +99,6 @@ endchoice
config PCI_VR41XX
bool "Add PCI control unit support of NEC VR4100 series"
depends on MACH_VR41XX && HW_HAS_PCI
depends on MACH_VR41XX && HAVE_PCI
default y
select PCI
arch/parisc/Kconfig
浏览文件 @ 19530313
......@@ -18,6 +18,7 @@ config PARISC
select INIT_ALL_POSSIBLE
select BUG
select BUILDTIME_EXTABLE_SORT
select HAVE_PCI
select HAVE_PERF_EVENTS
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_GZIP
......
arch/powerpc/Kconfig
浏览文件 @ 19530313
......@@ -168,6 +168,7 @@ config PPC
select GENERIC_CPU_VULNERABILITIES if PPC_BARRIER_NOSPEC
select GENERIC_IRQ_SHOW
select GENERIC_IRQ_SHOW_LEVEL
select GENERIC_PCI_IOMAP if PCI
select GENERIC_SMP_IDLE_THREAD
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
......@@ -235,6 +236,8 @@ config PPC
select OF_RESERVED_MEM
select OLD_SIGACTION if PPC32
select OLD_SIGSUSPEND
select PCI_DOMAINS if PCI
select PCI_SYSCALL if PCI
select RTC_LIB
select SPARSE_IRQ
select SYSCTL_EXCEPTION_TRACE
......@@ -879,9 +882,6 @@ config PPC_INDIRECT_PCI
depends on PCI
default y if 40x || 44x
config EISA
bool
config SBUS
bool
......@@ -926,59 +926,20 @@ config FSL_GTM
help
Freescale General-purpose Timers support
# Platforms that what PCI turned unconditionally just do select PCI
# in their config node. Platforms that want to choose at config
# time should select PPC_PCI_CHOICE
config PPC_PCI_CHOICE
bool
config PCI
bool "PCI support" if PPC_PCI_CHOICE
default y if !40x && !CPM2 && !PPC_8xx && !PPC_83xx \
&& !PPC_85xx && !PPC_86xx && !GAMECUBE_COMMON
select GENERIC_PCI_IOMAP
help
Find out whether your system includes a PCI bus. PCI is the name of
a bus system, i.e. the way the CPU talks to the other stuff inside
your box. If you say Y here, the kernel will include drivers and
infrastructure code to support PCI bus devices.
config PCI_DOMAINS
def_bool PCI
config PCI_SYSCALL
def_bool PCI
config PCI_8260
bool
depends on PCI && 8260
select PPC_INDIRECT_PCI
default y
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
config HAS_RAPIDIO
bool
config RAPIDIO
tristate "RapidIO support"
depends on HAS_RAPIDIO || PCI
help
If you say Y here, the kernel will include drivers and
infrastructure code to support RapidIO interconnect devices.
config FSL_RIO
bool "Freescale Embedded SRIO Controller support"
depends on RAPIDIO = y && HAS_RAPIDIO
depends on RAPIDIO = y && HAVE_RAPIDIO
default "n"
---help---
Include support for RapidIO controller on Freescale embedded
processors (MPC8548, MPC8641, etc).
source "drivers/rapidio/Kconfig"
endmenu
config NONSTATIC_KERNEL
......
arch/powerpc/platforms/40x/Kconfig
浏览文件 @ 19530313
......@@ -11,7 +11,7 @@ config EP405
bool "EP405/EP405PC"
depends on 40x
select 405GP
select PCI
select FORCE_PCI
help
This option enables support for the EP405/EP405PC boards.
......@@ -19,7 +19,7 @@ config HOTFOOT
bool "Hotfoot"
depends on 40x
select PPC40x_SIMPLE
select PCI
select FORCE_PCI
help
This option enables support for the ESTEEM 195E Hotfoot board.
......@@ -29,7 +29,7 @@ config KILAUEA
select 405EX
select PPC40x_SIMPLE
select PPC4xx_PCI_EXPRESS
select PCI
select FORCE_PCI
select PCI_MSI
select PPC4xx_MSI
help
......@@ -39,7 +39,7 @@ config MAKALU
bool "Makalu"
depends on 40x
select 405EX
select PCI
select FORCE_PCI
select PPC4xx_PCI_EXPRESS
select PPC40x_SIMPLE
help
......@@ -50,7 +50,7 @@ config WALNUT
depends on 40x
default y
select 405GP
select PCI
select FORCE_PCI
select OF_RTC
help
This option enables support for the IBM PPC405GP evaluation board.
......
arch/powerpc/platforms/44x/Kconfig
浏览文件 @ 19530313
......@@ -12,7 +12,7 @@ config BAMBOO
depends on 44x
select PPC44x_SIMPLE
select 440EP
select PCI
select FORCE_PCI
help
This option enables support for the IBM PPC440EP evaluation board.
......@@ -21,7 +21,7 @@ config BLUESTONE
depends on 44x
select PPC44x_SIMPLE
select APM821xx
select PCI
select FORCE_PCI
select PCI_MSI
select PPC4xx_MSI
select PPC4xx_PCI_EXPRESS
......@@ -34,7 +34,7 @@ config EBONY
depends on 44x
default y
select 440GP
select PCI
select FORCE_PCI
select OF_RTC
help
This option enables support for the IBM PPC440GP evaluation board.
......@@ -43,7 +43,7 @@ config SAM440EP
bool "Sam440ep"
depends on 44x
select 440EP
select PCI
select FORCE_PCI
help
This option enables support for the ACube Sam440ep board.
......@@ -60,7 +60,7 @@ config TAISHAN
depends on 44x
select PPC44x_SIMPLE
select 440GX
select PCI
select FORCE_PCI
help
This option enables support for the AMCC PPC440GX "Taishan"
evaluation board.
......@@ -70,7 +70,7 @@ config KATMAI
depends on 44x
select PPC44x_SIMPLE
select 440SPe
select PCI
select FORCE_PCI
select PPC4xx_PCI_EXPRESS
select PCI_MSI
select PPC4xx_MSI
......@@ -82,7 +82,7 @@ config RAINIER
depends on 44x
select PPC44x_SIMPLE
select 440GRX
select PCI
select FORCE_PCI
help
This option enables support for the AMCC PPC440GRX evaluation board.
......@@ -103,7 +103,7 @@ config ARCHES
depends on 44x
select PPC44x_SIMPLE
select 460EX # Odd since it uses 460GT but the effects are the same
select PCI
select FORCE_PCI
select PPC4xx_PCI_EXPRESS
help
This option enables support for the AMCC Dual PPC460GT evaluation board.
......@@ -112,7 +112,7 @@ config CANYONLANDS
bool "Canyonlands"
depends on 44x
select 460EX
select PCI
select FORCE_PCI
select PPC4xx_PCI_EXPRESS
select PCI_MSI
select PPC4xx_MSI
......@@ -126,7 +126,7 @@ config GLACIER
depends on 44x
select PPC44x_SIMPLE
select 460EX # Odd since it uses 460GT but the effects are the same
select PCI
select FORCE_PCI
select PPC4xx_PCI_EXPRESS
select IBM_EMAC_RGMII if IBM_EMAC
select IBM_EMAC_ZMII if IBM_EMAC
......@@ -138,7 +138,7 @@ config REDWOOD
depends on 44x
select PPC44x_SIMPLE
select 460SX
select PCI
select FORCE_PCI
select PPC4xx_PCI_EXPRESS
select PCI_MSI
select PPC4xx_MSI
......@@ -150,7 +150,7 @@ config EIGER
depends on 44x
select PPC44x_SIMPLE
select 460SX
select PCI
select FORCE_PCI
select PPC4xx_PCI_EXPRESS
select IBM_EMAC_RGMII if IBM_EMAC
help
......@@ -161,7 +161,7 @@ config YOSEMITE
depends on 44x
select PPC44x_SIMPLE
select 440EP
select PCI
select FORCE_PCI
help
This option enables support for the AMCC PPC440EP evaluation board.
......@@ -201,7 +201,7 @@ config AKEBONO
select SWIOTLB
select 476FPE
select PPC4xx_PCI_EXPRESS
select PCI
select FORCE_PCI
select PCI_MSI
select PPC4xx_HSTA_MSI
select I2C
......@@ -226,7 +226,7 @@ config ICON
depends on 44x
select PPC44x_SIMPLE
select 440SPe
select PCI
select FORCE_PCI
select PPC4xx_PCI_EXPRESS
help
This option enables support for the AMCC PPC440SPe evaluation board.
......@@ -250,7 +250,7 @@ config XILINX_VIRTEX440_GENERIC_BOARD
config XILINX_ML510
bool "Xilinx ML510 extra support"
depends on XILINX_VIRTEX440_GENERIC_BOARD
select PPC_PCI_CHOICE
select HAVE_PCI
select XILINX_PCI if PCI
select PPC_INDIRECT_PCI if PCI
select PPC_I8259 if PCI
......
arch/powerpc/platforms/512x/Kconfig
浏览文件 @ 19530313
......@@ -5,7 +5,7 @@ config PPC_MPC512x
select COMMON_CLK
select FSL_SOC
select IPIC
select PPC_PCI_CHOICE
select HAVE_PCI
select FSL_PCI if PCI
select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
......
arch/powerpc/platforms/52xx/Kconfig
浏览文件 @ 19530313
......@@ -3,7 +3,7 @@ config PPC_MPC52xx
bool "52xx-based boards"
depends on PPC_BOOK3S_32
select COMMON_CLK
select PPC_PCI_CHOICE
select HAVE_PCI
config PPC_MPC5200_SIMPLE
bool "Generic support for simple MPC5200 based boards"
......
arch/powerpc/platforms/83xx/Kconfig
浏览文件 @ 19530313
......@@ -3,7 +3,7 @@ menuconfig PPC_83xx
bool "83xx-based boards"
depends on PPC_BOOK3S_32
select PPC_UDBG_16550
select PPC_PCI_CHOICE
select HAVE_PCI
select FSL_PCI if PCI
select FSL_SOC
select IPIC
......
arch/powerpc/platforms/85xx/Kconfig
浏览文件 @ 19530313
......@@ -5,7 +5,7 @@ menuconfig FSL_SOC_BOOKE
select FSL_SOC
select PPC_UDBG_16550
select MPIC
select PPC_PCI_CHOICE
select HAVE_PCI
select FSL_PCI if PCI
select SERIAL_8250_EXTENDED if SERIAL_8250
select SERIAL_8250_SHARE_IRQ if SERIAL_8250
......@@ -66,7 +66,7 @@ config MPC85xx_CDS
bool "Freescale MPC85xx CDS"
select DEFAULT_UIMAGE
select PPC_I8259
select HAS_RAPIDIO
select HAVE_RAPIDIO
help
This option enables support for the MPC85xx CDS board
......@@ -74,7 +74,7 @@ config MPC85xx_MDS
bool "Freescale MPC85xx MDS"
select DEFAULT_UIMAGE
select PHYLIB if NETDEVICES
select HAS_RAPIDIO
select HAVE_RAPIDIO
select SWIOTLB
help
This option enables support for the MPC85xx MDS board
......@@ -219,7 +219,7 @@ config PPA8548
help
This option enables support for the Prodrive PPA8548 board.
select DEFAULT_UIMAGE
select HAS_RAPIDIO
select HAVE_RAPIDIO
config GE_IMP3A
bool "GE Intelligent Platforms IMP3A"
......@@ -277,7 +277,7 @@ config CORENET_GENERIC
select SWIOTLB
select GPIOLIB
select GPIO_MPC8XXX
select HAS_RAPIDIO
select HAVE_RAPIDIO
select PPC_EPAPR_HV_PIC
help
This option enables support for the FSL CoreNet based boards.
......
arch/powerpc/platforms/86xx/Kconfig
浏览文件 @ 19530313
......@@ -15,7 +15,7 @@ config MPC8641_HPCN
select PPC_I8259
select DEFAULT_UIMAGE
select FSL_ULI1575 if PCI
select HAS_RAPIDIO
select HAVE_RAPIDIO
select SWIOTLB
help
This option enables support for the MPC8641 HPCN board.
......@@ -57,7 +57,7 @@ config GEF_SBC610
select MMIO_NVRAM
select GPIOLIB
select GE_FPGA
select HAS_RAPIDIO
select HAVE_RAPIDIO
help
This option enables support for the GE SBC610.
......@@ -70,7 +70,7 @@ endif
config MPC8641
bool
select PPC_PCI_CHOICE
select HAVE_PCI
select FSL_PCI if PCI
select PPC_UDBG_16550
select MPIC
......@@ -79,7 +79,7 @@ config MPC8641
config MPC8610
bool
select PPC_PCI_CHOICE
select HAVE_PCI
select FSL_PCI if PCI
select PPC_UDBG_16550
select MPIC
......
arch/powerpc/platforms/Kconfig
浏览文件 @ 19530313
......@@ -265,7 +265,7 @@ config CPM2
bool "Enable support for the CPM2 (Communications Processor Module)"
depends on (FSL_SOC_BOOKE && PPC32) || 8260
select CPM
select PPC_PCI_CHOICE
select HAVE_PCI
select GPIOLIB
help
The CPM2 (Communications Processor Module) is a coprocessor on
......
arch/powerpc/platforms/Kconfig.cputype
浏览文件 @ 19530313
......@@ -40,14 +40,14 @@ config 40x
select PPC_DCR_NATIVE
select PPC_UDBG_16550
select 4xx_SOC
select PPC_PCI_CHOICE
select HAVE_PCI
config 44x
bool "AMCC 44x, 46x or 47x"
select PPC_DCR_NATIVE
select PPC_UDBG_16550
select 4xx_SOC
select PPC_PCI_CHOICE
select HAVE_PCI
select PHYS_64BIT
config E200
......
arch/powerpc/platforms/amigaone/Kconfig
浏览文件 @ 19530313
......@@ -5,7 +5,7 @@ config AMIGAONE
select PPC_I8259
select PPC_INDIRECT_PCI
select PPC_UDBG_16550
select PCI
select FORCE_PCI
select NOT_COHERENT_CACHE
select CHECK_CACHE_COHERENCY
select DEFAULT_UIMAGE
......
arch/powerpc/platforms/cell/Kconfig
浏览文件 @ 19530313
......@@ -27,7 +27,7 @@ config PPC_IBM_CELL_BLADE
depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN
select PPC_CELL_NATIVE
select PPC_OF_PLATFORM_PCI
select PCI
select FORCE_PCI
select MMIO_NVRAM
select PPC_UDBG_16550
select UDBG_RTAS_CONSOLE
......
arch/powerpc/platforms/chrp/Kconfig
浏览文件 @ 19530313
......@@ -12,5 +12,5 @@ config PPC_CHRP
select PPC_MPC106
select PPC_UDBG_16550
select PPC_NATIVE
select PCI
select FORCE_PCI
default y
arch/powerpc/platforms/embedded6xx/Kconfig
浏览文件 @ 19530313
......@@ -52,7 +52,7 @@ config MVME5100
bool "Motorola/Emerson MVME5100"
depends on EMBEDDED6xx
select MPIC
select PCI
select FORCE_PCI
select PPC_INDIRECT_PCI
select PPC_I8259
select PPC_NATIVE
......@@ -63,7 +63,7 @@ config MVME5100
config TSI108_BRIDGE
bool
select PCI
select FORCE_PCI
select MPIC
select MPIC_WEIRD
......
arch/powerpc/platforms/maple/Kconfig
浏览文件 @ 19530313
......@@ -2,7 +2,7 @@
config PPC_MAPLE
depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN
bool "Maple 970FX Evaluation Board"
select PCI
select FORCE_PCI
select MPIC
select U3_DART
select MPIC_U3_HT_IRQS
......
arch/powerpc/platforms/pasemi/Kconfig
浏览文件 @ 19530313
......@@ -3,7 +3,7 @@ config PPC_PASEMI
depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN
bool "PA Semi SoC-based platforms"
select MPIC
select PCI
select FORCE_PCI
select PPC_UDBG_16550
select PPC_NATIVE
select MPIC_BROKEN_REGREAD
......
arch/powerpc/platforms/powermac/Kconfig
浏览文件 @ 19530313
......@@ -3,7 +3,7 @@ config PPC_PMAC
bool "Apple PowerMac based machines"
depends on PPC_BOOK3S && CPU_BIG_ENDIAN
select MPIC
select PCI
select FORCE_PCI
select PPC_INDIRECT_PCI if PPC32
select PPC_MPC106 if PPC32
select PPC_NATIVE
......
arch/powerpc/platforms/powernv/Kconfig
浏览文件 @ 19530313
......@@ -7,7 +7,7 @@ config PPC_POWERNV
select PPC_ICP_NATIVE
select PPC_XIVE_NATIVE
select PPC_P7_NAP
select PCI
select FORCE_PCI
select PCI_MSI
select EPAPR_BOOT
select PPC_INDIRECT_PIO
......
arch/powerpc/platforms/ps3/Kconfig
浏览文件 @ 19530313
......@@ -6,7 +6,7 @@ config PPC_PS3
select USB_OHCI_LITTLE_ENDIAN
select USB_OHCI_BIG_ENDIAN_MMIO
select USB_EHCI_BIG_ENDIAN_MMIO
select PPC_PCI_CHOICE
select HAVE_PCI
help
This option enables support for the Sony PS3 game console
and other platforms using the PS3 hypervisor. Enabling this
......
arch/powerpc/platforms/pseries/Kconfig
浏览文件 @ 19530313
......@@ -5,7 +5,7 @@ config PPC_PSERIES
select HAVE_PCSPKR_PLATFORM
select MPIC
select OF_DYNAMIC
select PCI
select FORCE_PCI
select PCI_MSI
select PPC_XICS
select PPC_XIVE_SPAPR
......
arch/riscv/Kconfig
浏览文件 @ 19530313
......@@ -38,8 +38,11 @@ config RISCV
select SPARSE_IRQ
select SYSCTL_EXCEPTION_TRACE
select HAVE_ARCH_TRACEHOOK
select HAVE_PCI
select MODULES_USE_ELF_RELA if MODULES
select THREAD_INFO_IN_TASK
select PCI_DOMAINS_GENERIC if PCI
select PCI_MSI if PCI
select RISCV_TIMER
select GENERIC_IRQ_MULTI_HANDLER
select ARCH_HAS_PTE_SPECIAL
......@@ -272,28 +275,6 @@ endchoice
endmenu
menu "Bus support"
config PCI
bool "PCI support"
select PCI_MSI
help
This feature enables support for PCI bus system. If you say Y
here, the kernel will include drivers and infrastructure code
to support PCI bus devices.
If you don't know what to do here, say Y.
config PCI_DOMAINS
def_bool PCI
config PCI_DOMAINS_GENERIC
def_bool PCI
source "drivers/pci/Kconfig"
endmenu
menu "Power management options"
source "kernel/power/Kconfig"
......
arch/s390/Kconfig
浏览文件 @ 19530313
......@@ -166,14 +166,21 @@ config S390
select HAVE_MOD_ARCH_SPECIFIC
select HAVE_NOP_MCOUNT
select HAVE_OPROFILE
select HAVE_PCI
select HAVE_PERF_EVENTS
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_RSEQ
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_VIRT_CPU_ACCOUNTING
select IOMMU_HELPER if PCI
select IOMMU_SUPPORT if PCI
select MODULES_USE_ELF_RELA
select NEED_DMA_MAP_STATE if PCI
select NEED_SG_DMA_LENGTH if PCI
select OLD_SIGACTION
select OLD_SIGSUSPEND3
select PCI_DOMAINS if PCI
select PCI_MSI if PCI
select SPARSE_IRQ
select SYSCTL_EXCEPTION_TRACE
select THREAD_INFO_IN_TASK
......@@ -704,17 +711,6 @@ config QDIO
If unsure, say Y.
menuconfig PCI
bool "PCI support"
select PCI_MSI
select IOMMU_HELPER
select IOMMU_SUPPORT
select NEED_DMA_MAP_STATE
select NEED_SG_DMA_LENGTH
help
Enable PCI support.
if PCI
config PCI_NR_FUNCTIONS
......@@ -725,13 +721,8 @@ config PCI_NR_FUNCTIONS
This allows you to specify the maximum number of PCI functions which
this kernel will support.
source "drivers/pci/Kconfig"
endif # PCI
config PCI_DOMAINS
def_bool PCI
config HAS_IOMEM
def_bool PCI
......@@ -835,9 +826,6 @@ source "kernel/power/Kconfig"
endmenu
config PCMCIA
def_bool n
config CCW
def_bool y
......
arch/sh/Kconfig
浏览文件 @ 19530313
......@@ -39,13 +39,16 @@ config SUPERH
select GENERIC_IDLE_POLL_SETUP
select GENERIC_CLOCKEVENTS
select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST
select GENERIC_PCI_IOMAP if PCI
select GENERIC_SCHED_CLOCK
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
select HAVE_MOD_ARCH_SPECIFIC if DWARF_UNWINDER
select MODULES_USE_ELF_RELA
select NO_GENERIC_PCI_IOPORT_MAP if PCI
select OLD_SIGSUSPEND
select OLD_SIGACTION
select PCI_DOMAINS if PCI
select HAVE_ARCH_AUDITSYSCALL
select HAVE_FUTEX_CMPXCHG if FUTEX
select HAVE_NMI
......@@ -129,9 +132,6 @@ config SYS_SUPPORTS_SMP
config SYS_SUPPORTS_NUMA
bool
config SYS_SUPPORTS_PCI
bool
config STACKTRACE_SUPPORT
def_bool y
......@@ -854,24 +854,6 @@ config MAPLE
Dreamcast with a serial line terminal or a remote network
connection.
config PCI
bool "PCI support"
depends on SYS_SUPPORTS_PCI
select PCI_DOMAINS
select GENERIC_PCI_IOMAP
select NO_GENERIC_PCI_IOPORT_MAP
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
your box. If you have PCI, say Y, otherwise N.
config PCI_DOMAINS
bool
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
endmenu
menu "Power management options (EXPERIMENTAL)"
......
arch/sh/boards/Kconfig
浏览文件 @ 19530313
......@@ -101,7 +101,7 @@ config SH_7751_SOLUTION_ENGINE
config SH_7780_SOLUTION_ENGINE
bool "SolutionEngine7780"
select SOLUTION_ENGINE
select SYS_SUPPORTS_PCI
select HAVE_PCI
depends on CPU_SUBTYPE_SH7780
help
Select 7780 SolutionEngine if configuring for a Renesas SH7780
......@@ -129,7 +129,7 @@ config SH_HP6XX
config SH_DREAMCAST
bool "Dreamcast"
select SYS_SUPPORTS_PCI
select HAVE_PCI
depends on CPU_SUBTYPE_SH7091
help
Select Dreamcast if configuring for a SEGA Dreamcast.
......@@ -139,7 +139,7 @@ config SH_SH03
bool "Interface CTP/PCI-SH03"
depends on CPU_SUBTYPE_SH7751
select CPU_HAS_IPR_IRQ
select SYS_SUPPORTS_PCI
select HAVE_PCI
help
CTP/PCI-SH03 is a CPU module computer that is produced
by Interface Corporation.
......@@ -149,7 +149,7 @@ config SH_SECUREEDGE5410
bool "SecureEdge5410"
depends on CPU_SUBTYPE_SH7751R
select CPU_HAS_IPR_IRQ
select SYS_SUPPORTS_PCI
select HAVE_PCI
help
Select SecureEdge5410 if configuring for a SnapGear SH board.
This includes both the OEM SecureEdge products as well as the
......@@ -158,7 +158,7 @@ config SH_SECUREEDGE5410
config SH_RTS7751R2D
bool "RTS7751R2D"
depends on CPU_SUBTYPE_SH7751R
select SYS_SUPPORTS_PCI
select HAVE_PCI
select IO_TRAPPED if MMU
help
Select RTS7751R2D if configuring for a Renesas Technology
......@@ -176,7 +176,7 @@ config SH_RSK
config SH_SDK7780
bool "SDK7780R3"
depends on CPU_SUBTYPE_SH7780
select SYS_SUPPORTS_PCI
select HAVE_PCI
help
Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
evaluation board.
......@@ -184,7 +184,7 @@ config SH_SDK7780
config SH_SDK7786
bool "SDK7786"
depends on CPU_SUBTYPE_SH7786
select SYS_SUPPORTS_PCI
select HAVE_PCI
select NO_IOPORT_MAP if !PCI
select HAVE_SRAM_POOL
select REGULATOR_FIXED_VOLTAGE if REGULATOR
......@@ -195,7 +195,7 @@ config SH_SDK7786
config SH_HIGHLANDER
bool "Highlander"
depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
select SYS_SUPPORTS_PCI
select HAVE_PCI
select IO_TRAPPED if MMU
config SH_SH7757LCR
......@@ -207,7 +207,7 @@ config SH_SH7757LCR
config SH_SH7785LCR
bool "SH7785LCR"
depends on CPU_SUBTYPE_SH7785
select SYS_SUPPORTS_PCI
select HAVE_PCI
config SH_SH7785LCR_29BIT_PHYSMAPS
bool "SH7785LCR 29bit physmaps"
......@@ -229,7 +229,7 @@ config SH_URQUELL
bool "Urquell"
depends on CPU_SUBTYPE_SH7786
select GPIOLIB
select SYS_SUPPORTS_PCI
select HAVE_PCI
select NO_IOPORT_MAP if !PCI
config SH_MIGOR
......@@ -302,7 +302,7 @@ config SH_SH4202_MICRODEV
config SH_LANDISK
bool "LANDISK"
depends on CPU_SUBTYPE_SH7751R
select SYS_SUPPORTS_PCI
select HAVE_PCI
help
I-O DATA DEVICE, INC. "LANDISK Series" support.
......@@ -310,7 +310,7 @@ config SH_TITAN
bool "TITAN"
depends on CPU_SUBTYPE_SH7751R
select CPU_HAS_IPR_IRQ
select SYS_SUPPORTS_PCI
select HAVE_PCI
help
Select Titan if you are configuring for a Nimble Microsystems
NetEngine NP51R.
......@@ -325,7 +325,7 @@ config SH_SHMIN
config SH_LBOX_RE2
bool "L-BOX RE2"
depends on CPU_SUBTYPE_SH7751R
select SYS_SUPPORTS_PCI
select HAVE_PCI
help
Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
......@@ -346,7 +346,7 @@ config SH_MAGIC_PANEL_R2
config SH_CAYMAN
bool "Hitachi Cayman"
depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
select SYS_SUPPORTS_PCI
select HAVE_PCI
select ARCH_MIGHT_HAVE_PC_SERIO
config SH_POLARIS
......@@ -380,7 +380,7 @@ config SH_APSH4A3A
config SH_APSH4AD0A
bool "AP-SH4AD-0A"
select SH_ALPHA_BOARD
select SYS_SUPPORTS_PCI
select HAVE_PCI
select REGULATOR_FIXED_VOLTAGE if REGULATOR
depends on CPU_SUBTYPE_SH7786
help
......
arch/sparc/Kconfig
浏览文件 @ 19530313
......@@ -21,6 +21,7 @@ config SPARC
select HAVE_ARCH_KGDB if !SMP || SPARC64
select HAVE_ARCH_TRACEHOOK
select HAVE_EXIT_THREAD
select HAVE_PCI
select SYSCTL_EXCEPTION_TRACE
select RTC_CLASS
select RTC_DRV_M48T59
......@@ -38,6 +39,7 @@ config SPARC
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
select MODULES_USE_ELF_RELA
select PCI_SYSCALL if PCI
select ODD_RT_SIGACTION
select OLD_SIGSUSPEND
select CPU_NO_EFFICIENT_FFS
......@@ -87,6 +89,7 @@ config SPARC64
select GENERIC_TIME_VSYSCALL
select ARCH_CLOCKSOURCE_DATA
select ARCH_HAS_PTE_SPECIAL
select PCI_DOMAINS if PCI
config ARCH_DEFCONFIG
string
......@@ -470,24 +473,6 @@ config SUN_LDOMS
Say Y here is you want to support virtual devices via
Logical Domains.
config PCI
bool "Support for PCI and PS/2 keyboard/mouse"
help
Find out whether your system includes a PCI bus. PCI is the name of
a bus system, i.e. the way the CPU talks to the other stuff inside
your box. If you say Y here, the kernel will include drivers and
infrastructure code to support PCI bus devices.
CONFIG_PCI is needed for all JavaStation's (including MrCoffee),
CP-1200, JavaEngine-1, Corona, Red October, and Serengeti SGSC.
All of these platforms are extremely obscure, so say N if unsure.
config PCI_DOMAINS
def_bool PCI if SPARC64
config PCI_SYSCALL
def_bool PCI
config PCIC_PCI
bool
depends on PCI && SPARC32 && !SPARC_LEON
......@@ -516,10 +501,6 @@ config SPARC_GRPCI2
help
Say Y here to include the GRPCI2 Host Bridge Driver.
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
config SUN_OPENPROMFS
tristate "Openprom tree appears in /proc/openprom"
help
......
arch/um/Kconfig
浏览文件 @ 19530313
......@@ -31,12 +31,6 @@ config ISA
config SBUS
bool
config PCI
bool
config PCMCIA
bool
config TRACE_IRQFLAGS_SUPPORT
bool
default y
......
arch/unicore32/Kconfig
浏览文件 @ 19530313
......@@ -10,6 +10,7 @@ config UNICORE32
select GENERIC_ATOMIC64
select HAVE_KERNEL_LZO
select HAVE_KERNEL_LZMA
select HAVE_PCI
select VIRT_TO_BUS
select ARCH_HAVE_CUSTOM_GPIO_H
select GENERIC_FIND_FIRST_BIT
......@@ -115,22 +116,6 @@ config UNICORE_FPU_F64
endmenu
menu "Bus support"
config PCI
bool "PCI Support"
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
VESA. If you have PCI, say Y, otherwise N.
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
endmenu
menu "Kernel Features"
source "kernel/Kconfig.hz"
......
arch/x86/Kconfig
浏览文件 @ 19530313
......@@ -145,6 +145,7 @@ config X86
select HAVE_DYNAMIC_FTRACE_WITH_REGS
select HAVE_EBPF_JIT
select HAVE_EFFICIENT_UNALIGNED_ACCESS
select HAVE_EISA
select HAVE_EXIT_THREAD
select HAVE_FENTRY if X86_64 || DYNAMIC_FTRACE
select HAVE_FTRACE_MCOUNT_RECORD
......@@ -178,6 +179,7 @@ config X86
select HAVE_PERF_EVENTS
select HAVE_PERF_EVENTS_NMI
select HAVE_HARDLOCKUP_DETECTOR_PERF if PERF_EVENTS && HAVE_PERF_EVENTS_NMI
select HAVE_PCI
select HAVE_PERF_REGS
select HAVE_PERF_USER_STACK_DUMP
select HAVE_RCU_TABLE_FREE if PARAVIRT
......@@ -194,6 +196,7 @@ config X86
select HOTPLUG_SMT if SMP
select IRQ_FORCED_THREADING
select NEED_SG_DMA_LENGTH
select PCI_DOMAINS if PCI
select PCI_LOCKLESS_CONFIG
select PERF_EVENTS
select RTC_LIB
......@@ -2574,15 +2577,6 @@ endmenu
menu "Bus options (PCI etc.)"
config PCI
bool "PCI support"
default y
---help---
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
VESA. If you have PCI, say Y, otherwise N.
choice
prompt "PCI access mode"
depends on X86_32 && PCI
......@@ -2644,10 +2638,6 @@ config PCI_XEN
depends on PCI && XEN
select SWIOTLB_XEN
config PCI_DOMAINS
def_bool y
depends on PCI
config MMCONF_FAM10H
def_bool y
depends on X86_64 && PCI_MMCONFIG && ACPI
......@@ -2665,8 +2655,6 @@ config PCI_CNB20LE_QUIRK
You should say N unless you know you need this.
source "drivers/pci/Kconfig"
config ISA_BUS
bool "ISA bus support on modern systems" if EXPERT
help
......@@ -2697,24 +2685,6 @@ config ISA
(MCA) or VESA. ISA is an older system, now being displaced by PCI;
newer boards don't support it. If you have ISA, say Y, otherwise N.
config EISA
bool "EISA support"
depends on ISA
---help---
The Extended Industry Standard Architecture (EISA) bus was
developed as an open alternative to the IBM MicroChannel bus.
The EISA bus provided some of the features of the IBM MicroChannel
bus while maintaining backward compatibility with cards made for
the older ISA bus. The EISA bus saw limited use between 1988 and
1995 when it was made obsolete by the PCI bus.
Say Y here if you are building a kernel for an EISA-based machine.
Otherwise, say N.
source "drivers/eisa/Kconfig"
config SCx200
tristate "NatSemi SCx200 support"
---help---
......@@ -2826,17 +2796,6 @@ config AMD_NB
def_bool y
depends on CPU_SUP_AMD && PCI
source "drivers/pcmcia/Kconfig"
config RAPIDIO
tristate "RapidIO support"
depends on PCI
help
If enabled this option will include drivers and the core
infrastructure code to support RapidIO interconnect devices.
source "drivers/rapidio/Kconfig"
config X86_SYSFB
bool "Mark VGA/VBE/EFI FB as generic system framebuffer"
help
......
arch/x86/configs/i386_defconfig
浏览文件 @ 19530313
......@@ -69,6 +69,7 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_PCI=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCI_MSI=y
CONFIG_PCCARD=y
......
arch/x86/configs/x86_64_defconfig
浏览文件 @ 19530313
......@@ -67,6 +67,7 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_PCI=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCCARD=y
......
arch/xtensa/Kconfig
浏览文件 @ 19530313
......@@ -27,6 +27,7 @@ config XTENSA
select HAVE_HW_BREAKPOINT if PERF_EVENTS
select HAVE_IRQ_TIME_ACCOUNTING
select HAVE_OPROFILE
select HAVE_PCI
select HAVE_PERF_EVENTS
select HAVE_STACKPROTECTOR
select HAVE_SYSCALL_TRACEPOINTS
......@@ -381,21 +382,6 @@ config XTENSA_CALIBRATE_CCOUNT
config SERIAL_CONSOLE
def_bool n
menu "Bus options"
config PCI
bool "PCI support"
default y
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
VESA. If you have PCI, say Y, otherwise N.
source "drivers/pci/Kconfig"
endmenu
menu "Platform options"
choice
......@@ -528,8 +514,6 @@ config FORCE_MAX_ZONEORDER
This config option is actually maximum order plus one. For example,
a value of 11 means that the largest free memory block is 2^10 pages.
source "drivers/pcmcia/Kconfig"
config PLATFORM_WANT_DEFAULT_MEM
def_bool n
......
arch/xtensa/configs/common_defconfig
浏览文件 @ 19530313
CONFIG_PCI=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_LOG_BUF_SHIFT=14
......
drivers/Kconfig
浏览文件 @ 19530313
# SPDX-License-Identifier: GPL-2.0
menu "Device Drivers"
# Keep I/O buses first
source "drivers/amba/Kconfig"
source "drivers/eisa/Kconfig"
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
source "drivers/rapidio/Kconfig"
source "drivers/base/Kconfig"
......
drivers/eisa/Kconfig
浏览文件 @ 19530313
#
# EISA configuration
#
config HAVE_EISA
bool
menuconfig EISA
bool "EISA support"
depends on HAVE_EISA
---help---
The Extended Industry Standard Architecture (EISA) bus was
developed as an open alternative to the IBM MicroChannel bus.
The EISA bus provided some of the features of the IBM MicroChannel
bus while maintaining backward compatibility with cards made for
the older ISA bus. The EISA bus saw limited use between 1988 and
1995 when it was made obsolete by the PCI bus.
Say Y here if you are building a kernel for an EISA-based machine.
Otherwise, say N.
config EISA_VLB_PRIMING
bool "Vesa Local Bus priming"
depends on X86 && EISA
......@@ -53,4 +73,3 @@ config EISA_NAMES
names.
When in doubt, say Y.
drivers/parisc/Kconfig
浏览文件 @ 19530313
......@@ -2,6 +2,7 @@ menu "Bus options (PCI, PCMCIA, EISA, GSC, ISA)"
config GSC
bool "VSC/GSC/HSC bus support"
select HAVE_EISA
default y
help
The VSC, GSC and HSC busses were used from the earliest 700-series
......@@ -46,16 +47,6 @@ config GSC_WAX
used), a HIL interface chip and is also known to be used as the
GSC bridge for an X.25 GSC card.
config EISA
bool "EISA support"
depends on GSC
help
Say Y here if you have an EISA bus in your machine. This code
supports both the Mongoose & Wax EISA adapters. It is sadly
incomplete and lacks support for card-to-host DMA.
source "drivers/eisa/Kconfig"
config ISA
bool "ISA support"
depends on EISA
......@@ -63,17 +54,6 @@ config ISA
If you want to plug an ISA card into your EISA bus, say Y here.
Most people should say N.
config PCI
bool "PCI support"
help
All recent HP machines have PCI slots, and you should say Y here
if you have a recent machine. If you are convinced you do not have
PCI slots in your machine (eg a 712), then you may say "N" here.
Beware that some GSC cards have a Dino onboard and PCI inside them,
so it may be safest to say "Y" anyway.
source "drivers/pci/Kconfig"
config GSC_DINO
bool "GSCtoPCI/Dino PCI support"
depends on PCI && GSC
......@@ -103,8 +83,6 @@ config IOMMU_SBA
depends on PCI_LBA
default PCI_LBA
source "drivers/pcmcia/Kconfig"
endmenu
menu "PA-RISC specific drivers"
......
drivers/pci/Kconfig
浏览文件 @ 19530313
......@@ -3,6 +3,36 @@
# PCI configuration
#
# select this to offer the PCI prompt
config HAVE_PCI
bool
# select this to unconditionally force on PCI support
config FORCE_PCI
bool
select HAVE_PCI
select PCI
menuconfig PCI
bool "PCI support"
depends on HAVE_PCI
help
This option enables support for the PCI local bus, including
support for PCI-X and the foundations for PCI Express support.
Say 'Y' here unless you know what you are doing.
config PCI_DOMAINS
bool
depends on PCI
config PCI_DOMAINS_GENERIC
bool
depends on PCI
select PCI_DOMAINS
config PCI_SYSCALL
bool
source "drivers/pci/pcie/Kconfig"
config PCI_MSI
......
drivers/pci/endpoint/Kconfig
浏览文件 @ 19530313
......@@ -7,7 +7,7 @@ menu "PCI Endpoint"
config PCI_ENDPOINT
bool "PCI Endpoint Support"
depends on HAS_DMA
depends on HAVE_PCI
help
Enable this configuration option to support configurable PCI
endpoint. This should be enabled if the platform has a PCI
......
drivers/pcmcia/Kconfig
浏览文件 @ 19530313
......@@ -4,6 +4,7 @@
menuconfig PCCARD
tristate "PCCard (PCMCIA/CardBus) support"
depends on !UML
---help---
Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
computer. These are credit-card size devices such as network cards,
......
drivers/rapidio/Kconfig
浏览文件 @ 19530313
#
# RapidIO configuration
#
config HAVE_RAPIDIO
bool
menuconfig RAPIDIO
tristate "RapidIO support"
depends on HAVE_RAPIDIO || PCI
help
If you say Y here, the kernel will include drivers and
infrastructure code to support RapidIO interconnect devices.
source "drivers/rapidio/devices/Kconfig"
config RAPIDIO_DISC_TIMEOUT
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或