提交 182c2909 编写于 作者: A Andi Shyti 提交者: Mauro Carvalho Chehab

[media] Documentation: bindings: add documentation for ir-spi device driver

Document the ir-spi driver's binding which is a IR led driven
through the SPI line.
Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
上级 d5083677
无相关合并请求
Device tree bindings for IR LED connected through SPI bus which is used as
remote controller.
The IR LED switch is connected to the MOSI line of the SPI device and the data
are delivered thourgh that.
Required properties:
- compatible: should be "ir-spi-led".
Optional properties:
- duty-cycle: 8 bit balue that represents the percentage of one period
in which the signal is active. It can be 50, 60, 70, 75, 80 or 90.
- led-active-low: boolean value that specifies whether the output is
negated with a NOT gate.
- power-supply: specifies the power source. It can either be a regulator
or a gpio which enables a regulator, i.e. a regulator-fixed as
described in
Documentation/devicetree/bindings/regulator/fixed-regulator.txt
Example:
irled@0 {
compatible = "ir-spi-led";
reg = <0x0>;
spi-max-frequency = <5000000>;
power-supply = <&vdd_led>;
led-active-low;
duty-cycle = /bits/ 8 <60>;
};
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册