提交 1820180b 编写于 作者: M Michael Chan 提交者: David S. Miller

[TG3]: nvram cleanup

Some nvram related cleanup:

1. Add a tg3_nvram_read_swab() since swabing the data is frequently
done.

2. Add a function to convert nvram address to physical address
instead of doing it in 2 separate places.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 79f4d13a
......@@ -7457,6 +7457,7 @@ static int tg3_get_eeprom_len(struct net_device *dev)
}
static int tg3_nvram_read(struct tg3 *tp, u32 offset, u32 *val);
static int tg3_nvram_read_swab(struct tg3 *tp, u32 offset, u32 *val);
static int tg3_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, u8 *data)
{
......@@ -7973,10 +7974,9 @@ static int tg3_test_nvram(struct tg3 *tp)
u32 *buf, csum, magic;
int i, j, err = 0, size;
if (tg3_nvram_read(tp, 0, &magic) != 0)
if (tg3_nvram_read_swab(tp, 0, &magic) != 0)
return -EIO;
magic = swab32(magic);
if (magic == TG3_EEPROM_MAGIC)
size = NVRAM_TEST_SIZE;
else if ((magic & 0xff000000) == 0xa5000000) {
......@@ -8749,10 +8749,9 @@ static void __devinit tg3_get_eeprom_size(struct tg3 *tp)
tp->nvram_size = EEPROM_CHIP_SIZE;
if (tg3_nvram_read(tp, 0, &val) != 0)
if (tg3_nvram_read_swab(tp, 0, &magic) != 0)
return;
magic = swab32(val);
if ((magic != TG3_EEPROM_MAGIC) && ((magic & 0xff000000) != 0xa5000000))
return;
......@@ -8764,10 +8763,10 @@ static void __devinit tg3_get_eeprom_size(struct tg3 *tp)
cursize = 0x10;
while (cursize < tp->nvram_size) {
if (tg3_nvram_read(tp, cursize, &val) != 0)
if (tg3_nvram_read_swab(tp, cursize, &val) != 0)
return;
if (swab32(val) == magic)
if (val == magic)
break;
cursize <<= 1;
......@@ -8780,11 +8779,11 @@ static void __devinit tg3_get_nvram_size(struct tg3 *tp)
{
u32 val;
if (tg3_nvram_read(tp, 0, &val) != 0)
if (tg3_nvram_read_swab(tp, 0, &val) != 0)
return;
/* Selfboot format */
if (swab32(val) != TG3_EEPROM_MAGIC) {
if (val != TG3_EEPROM_MAGIC) {
tg3_get_eeprom_size(tp);
return;
}
......@@ -9056,6 +9055,20 @@ static int tg3_nvram_exec_cmd(struct tg3 *tp, u32 nvram_cmd)
return 0;
}
static u32 tg3_nvram_phys_addr(struct tg3 *tp, u32 addr)
{
if ((tp->tg3_flags & TG3_FLAG_NVRAM) &&
(tp->tg3_flags & TG3_FLAG_NVRAM_BUFFERED) &&
(tp->tg3_flags2 & TG3_FLG2_FLASH) &&
(tp->nvram_jedecnum == JEDEC_ATMEL))
addr = ((addr / tp->nvram_pagesize) <<
ATMEL_AT45DB0X1B_PAGE_POS) +
(addr % tp->nvram_pagesize);
return addr;
}
static int tg3_nvram_read(struct tg3 *tp, u32 offset, u32 *val)
{
int ret;
......@@ -9068,14 +9081,7 @@ static int tg3_nvram_read(struct tg3 *tp, u32 offset, u32 *val)
if (!(tp->tg3_flags & TG3_FLAG_NVRAM))
return tg3_nvram_read_using_eeprom(tp, offset, val);
if ((tp->tg3_flags & TG3_FLAG_NVRAM_BUFFERED) &&
(tp->tg3_flags2 & TG3_FLG2_FLASH) &&
(tp->nvram_jedecnum == JEDEC_ATMEL)) {
offset = ((offset / tp->nvram_pagesize) <<
ATMEL_AT45DB0X1B_PAGE_POS) +
(offset % tp->nvram_pagesize);
}
offset = tg3_nvram_phys_addr(tp, offset);
if (offset > NVRAM_ADDR_MSK)
return -EINVAL;
......@@ -9100,6 +9106,16 @@ static int tg3_nvram_read(struct tg3 *tp, u32 offset, u32 *val)
return ret;
}
static int tg3_nvram_read_swab(struct tg3 *tp, u32 offset, u32 *val)
{
int err;
u32 tmp;
err = tg3_nvram_read(tp, offset, &tmp);
*val = swab32(tmp);
return err;
}
static int tg3_nvram_write_block_using_eeprom(struct tg3 *tp,
u32 offset, u32 len, u8 *buf)
{
......@@ -9252,15 +9268,7 @@ static int tg3_nvram_write_block_buffered(struct tg3 *tp, u32 offset, u32 len,
page_off = offset % tp->nvram_pagesize;
if ((tp->tg3_flags2 & TG3_FLG2_FLASH) &&
(tp->nvram_jedecnum == JEDEC_ATMEL)) {
phy_addr = ((offset / tp->nvram_pagesize) <<
ATMEL_AT45DB0X1B_PAGE_POS) + page_off;
}
else {
phy_addr = offset;
}
phy_addr = tg3_nvram_phys_addr(tp, offset);
tw32(NVRAM_ADDR, phy_addr);
......@@ -9689,10 +9697,10 @@ static void __devinit tg3_read_partno(struct tg3 *tp)
return;
}
if (tg3_nvram_read(tp, 0x0, &magic))
if (tg3_nvram_read_swab(tp, 0x0, &magic))
return;
if (swab32(magic) == TG3_EEPROM_MAGIC) {
if (magic == TG3_EEPROM_MAGIC) {
for (i = 0; i < 256; i += 4) {
u32 tmp;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册