提交 17263e75 编写于 作者: S Sreekanth Reddy 提交者: James Bottomley

[SCSI] mpt3sas: MPI2.5 Rev F v2.5.1.1 specification

Change set in MPI v2.5 Rev F(v2.5.1.1) specification and 2.00.29 header files

1. Added a bit to the IOCExceptions field of the IOCFacts Reply to indicate
   that the IOC detected a partial memory failure.
2. Added ElapsedSeconds field to RAID Volume Indicator Structure. Added
   Elapsed Seconds Valid flag to Flags field of this structure.
3. Added ElapsedSeconds field to Integrated RAID Operations Status Event Data.
4. Added two new AbortType values for TargetModeAbort Request, one to abort
   all I/Os from a single initiator, and the other to abort only Command IUs.
5. Added a new chapter covering DMA Flags and Multicast Modes.
6. In the IOCSettings field of BIOS Page 1, modified the Adapter Support bits
   description to specify X86 BIOS.
7. Marked bit 0 of the ControlFlags field of SAS IO Unit Page 1 as
   obsolete. This was the Clear SATA Affiliation flag.
8. Added additional requirements for certain IOCs that support more than eight
   MSI-x vectors.
Signed-off-by: NSreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
上级 14be49ac
/*
* Copyright (c) 2000-2012 LSI Corporation.
* Copyright (c) 2000-2013 LSI Corporation.
*
*
* Name: mpi2.h
......@@ -8,7 +8,7 @@
* scatter/gather formats.
* Creation Date: June 21, 2006
*
* mpi2.h Version: 02.00.26
* mpi2.h Version: 02.00.29
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
......@@ -82,6 +82,10 @@
* 03-29-12 02.00.25 Bumped MPI2_HEADER_VERSION_UNIT.
* Added Hard Reset delay timings.
* 07-10-12 02.00.26 Bumped MPI2_HEADER_VERSION_UNIT.
* 07-26-12 02.00.27 Bumped MPI2_HEADER_VERSION_UNIT.
* 11-27-12 02.00.28 Bumped MPI2_HEADER_VERSION_UNIT.
* 12-20-12 02.00.29 Bumped MPI2_HEADER_VERSION_UNIT.
* Added MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET.
* --------------------------------------------------------------------------
*/
......@@ -115,7 +119,7 @@
#define MPI2_VERSION_02_05 (0x0205)
/*Unit and Dev versioning for this MPI header set */
#define MPI2_HEADER_VERSION_UNIT (0x1A)
#define MPI2_HEADER_VERSION_UNIT (0x1D)
#define MPI2_HEADER_VERSION_DEV (0x00)
#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
......@@ -274,6 +278,8 @@ typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS {
#define MPI2_REPLY_POST_HOST_INDEX_MASK (0x00FFFFFF)
#define MPI2_RPHI_MSIX_INDEX_MASK (0xFF000000)
#define MPI2_RPHI_MSIX_INDEX_SHIFT (24)
#define MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET (0x0000030C) /*MPI v2.5 only*/
/*
*Defines for the HCBSize and address
......
/*
* Copyright (c) 2000-2011 LSI Corporation.
* Copyright (c) 2000-2013 LSI Corporation.
*
*
* Name: mpi2_cnfg.h
* Title: MPI Configuration messages and pages
* Creation Date: November 10, 2006
*
* mpi2_cnfg.h Version: 02.00.22
* mpi2_cnfg.h Version: 02.00.24
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
......@@ -155,6 +155,11 @@
* Added UEFIVersion field to BIOS Page 1 and defined new
* BiosOptions bits.
* Incorporating additions for MPI v2.5.
* 11-27-12 02.00.23 Added MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER.
* Added MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID.
* 12-20-12 02.00.24 Marked MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION as
* obsolete for MPI v2.5 and later.
* Added some defines for 12G SAS speeds.
* --------------------------------------------------------------------------
*/
......@@ -714,6 +719,7 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_7 {
#define MPI2_MANUFACTURING7_PAGEVERSION (0x01)
/*defines for the Flags field */
#define MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER (0x00000002)
#define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001)
......@@ -1310,6 +1316,9 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1 {
#define MPI2_BIOSPAGE1_PAGEVERSION (0x05)
/*values for BIOS Page 1 BiosOptions field */
#define MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID (0x000000F0)
#define MPI2_BIOSPAGE1_OPTIONS_LSI_OEM_ID (0x00000000)
#define MPI2_BIOSPAGE1_OPTIONS_MASK_UEFI_HII_REGISTRATION (0x00000006)
#define MPI2_BIOSPAGE1_OPTIONS_ENABLE_UEFI_HII (0x00000000)
#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_UEFI_HII (0x00000002)
......@@ -1884,6 +1893,7 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 {
#define MPI2_SAS_PRATE_MAX_RATE_1_5 (0x80)
#define MPI2_SAS_PRATE_MAX_RATE_3_0 (0x90)
#define MPI2_SAS_PRATE_MAX_RATE_6_0 (0xA0)
#define MPI25_SAS_PRATE_MAX_RATE_12_0 (0xB0)
#define MPI2_SAS_PRATE_MIN_RATE_MASK (0x0F)
#define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00)
#define MPI2_SAS_PRATE_MIN_RATE_1_5 (0x08)
......@@ -1897,6 +1907,7 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 {
#define MPI2_SAS_HWRATE_MAX_RATE_1_5 (0x80)
#define MPI2_SAS_HWRATE_MAX_RATE_3_0 (0x90)
#define MPI2_SAS_HWRATE_MAX_RATE_6_0 (0xA0)
#define MPI25_SAS_HWRATE_MAX_RATE_12_0 (0xB0)
#define MPI2_SAS_HWRATE_MIN_RATE_MASK (0x0F)
#define MPI2_SAS_HWRATE_MIN_RATE_1_5 (0x08)
#define MPI2_SAS_HWRATE_MIN_RATE_3_0 (0x09)
......
/*
* Copyright (c) 2000-2012 LSI Corporation.
* Copyright (c) 2000-2013 LSI Corporation.
*
*
* Name: mpi2_init.h
......
/*
* Copyright (c) 2000-2012 LSI Corporation.
* Copyright (c) 2000-2013 LSI Corporation.
*
*
* Name: mpi2_ioc.h
* Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
* Creation Date: October 11, 2006
*
* mpi2_ioc.h Version: 02.00.21
* mpi2_ioc.h Version: 02.00.22
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
......@@ -124,6 +124,9 @@
* Marked MPI2_PM_CONTROL_FEATURE_PCIE_LINK as obsolete.
* 11-18-11 02.00.20 Incorporating additions for MPI v2.5.
* 03-29-12 02.00.21 Added a product specific range to event values.
* 07-26-12 02.00.22 Added MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE.
* Added ElapsedSeconds field to
* MPI2_EVENT_DATA_IR_OPERATION_STATUS.
* --------------------------------------------------------------------------
*/
......@@ -283,6 +286,7 @@ typedef struct _MPI2_IOC_FACTS_REPLY {
#define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0)
/*IOCExceptions */
#define MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0200)
#define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100)
#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x00E0)
......@@ -634,7 +638,7 @@ typedef struct _MPI2_EVENT_DATA_IR_OPERATION_STATUS {
U8 RAIDOperation; /*0x04 */
U8 PercentComplete; /*0x05 */
U16 Reserved2; /*0x06 */
U32 Resereved3; /*0x08 */
U32 ElapsedSeconds; /*0x08 */
} MPI2_EVENT_DATA_IR_OPERATION_STATUS,
*PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS,
Mpi2EventDataIrOperationStatus_t,
......
/*
* Copyright (c) 2000-2012 LSI Corporation.
* Copyright (c) 2000-2013 LSI Corporation.
*
*
* Name: mpi2_raid.h
* Title: MPI Integrated RAID messages and structures
* Creation Date: April 26, 2007
*
* mpi2_raid.h Version: 02.00.08
* mpi2_raid.h Version: 02.00.09
*
* Version History
* ---------------
......@@ -28,6 +28,8 @@
* Added product-specific range to RAID Action values.
* 11-18-11 02.00.07 Incorporating additions for MPI v2.5.
* 02-06-12 02.00.08 Added MPI2_RAID_ACTION_PHYSDISK_HIDDEN.
* 07-26-12 02.00.09 Added ElapsedSeconds field to MPI2_RAID_VOL_INDICATOR.
* Added MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID define.
* --------------------------------------------------------------------------
*/
......@@ -269,10 +271,12 @@ typedef struct _MPI2_RAID_VOL_INDICATOR {
U64 TotalBlocks; /*0x00 */
U64 BlocksRemaining; /*0x08 */
U32 Flags; /*0x10 */
U32 ElapsedSeconds; /* 0x14 */
} MPI2_RAID_VOL_INDICATOR, *PTR_MPI2_RAID_VOL_INDICATOR,
Mpi2RaidVolIndicator_t, *pMpi2RaidVolIndicator_t;
/*defines for RAID Volume Indicator Flags field */
#define MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID (0x80000000)
#define MPI2_RAID_VOL_FLAGS_OP_MASK (0x0000000F)
#define MPI2_RAID_VOL_FLAGS_OP_BACKGROUND_INIT (0x00000000)
#define MPI2_RAID_VOL_FLAGS_OP_ONLINE_CAP_EXPANSION (0x00000001)
......@@ -312,7 +316,7 @@ typedef struct _MPI2_RAID_COMPATIBILITY_RESULT_STRUCT {
/*RAID Action Reply ActionData union */
typedef union _MPI2_RAID_ACTION_REPLY_DATA {
U32 Word[5];
U32 Word[6];
MPI2_RAID_VOL_INDICATOR RaidVolumeIndicator;
U16 VolDevHandle;
U8 VolumeState;
......
/*
* Copyright (c) 2000-2012 LSI Corporation.
* Copyright (c) 2000-2013 LSI Corporation.
*
*
* Name: mpi2_sas.h
......
/*
* Copyright (c) 2000-2012 LSI Corporation.
* Copyright (c) 2000-2013 LSI Corporation.
*
*
* Name: mpi2_tool.h
* Title: MPI diagnostic tool structures and definitions
* Creation Date: March 26, 2007
*
* mpi2_tool.h Version: 02.00.09
* mpi2_tool.h Version: 02.00.10
*
* Version History
* ---------------
......@@ -30,6 +30,8 @@
* 11-18-11 02.00.08 Incorporating additions for MPI v2.5.
* 07-10-12 02.00.09 Add MPI v2.5 Toolbox Diagnostic CLI Tool Request
* message.
* 07-26-12 02.00.10 Modified MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST so that
* it uses MPI Chain SGE as well as MPI Simple SGE.
* --------------------------------------------------------------------------
*/
......@@ -279,7 +281,7 @@ typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST {
U16 Reserved6; /*0x0E */
U32 DataLength; /*0x10 */
U8 DiagnosticCliCommand[MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH];/*0x14 */
MPI2_SGE_SIMPLE_UNION SGL; /*0x70 */
MPI2_MPI_SGE_IO_UNION SGL; /*0x70 */
} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
*PTR_MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
Mpi2ToolboxDiagnosticCliRequest_t,
......@@ -302,7 +304,7 @@ typedef struct _MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST {
U32 Reserved5; /*0x0C */
U32 DataLength; /*0x10 */
U8 DiagnosticCliCommand[MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH];/*0x14 */
MPI25_SGE_IO_UNION SGL; /*0x70 */
MPI25_SGE_IO_UNION SGL; /* 0x70 */
} MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
*PTR_MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
Mpi25ToolboxDiagnosticCliRequest_t,
......
/*
* Copyright (c) 2000-2007 LSI Corporation.
* Copyright (c) 2000-2013 LSI Corporation.
*
*
* Name: mpi2_type.h
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册