selftests: mlxsw: spectrum-2: Remove q_in_vni_veto test

q_in_vni_veto.sh is not needed anymore because VxLAN with an 802.1ad
bridge and VxLAN with an 802.1d bridge can coexist.

Remove the test.
Signed-off-by: NAmit Cohen <amcohen@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tools/testing/selftests/drivers/net/mlxsw/spectrum-2/q_in_vni_veto.sh

-#!/bin/bash
-# SPDX-License-Identifier: GPL-2.0
-
-lib_dir=$(dirname $0)/../../../../net/forwarding
-
-VXPORT=4789
-
-ALL_TESTS="
-	create_dot1d_and_dot1ad_vxlans
-"
-NUM_NETIFS=2
-source $lib_dir/lib.sh
-
-setup_prepare()
-{
-	swp1=${NETIFS[p1]}
-	swp2=${NETIFS[p2]}
-
-	ip link set dev $swp1 up
-	ip link set dev $swp2 up
-}
-
-cleanup()
-{
-	pre_cleanup
-
-	ip link set dev $swp2 down
-	ip link set dev $swp1 down
-}
-
-create_dot1d_and_dot1ad_vxlans()
-{
-	RET=0
-
-	ip link add dev br0 type bridge vlan_filtering 1 vlan_protocol 802.1ad \
-		vlan_default_pvid 0 mcast_snooping 0
-	ip link set dev br0 up
-
-	ip link add name vx100 type vxlan id 1000 local 192.0.2.17 dstport \
-		"$VXPORT" nolearning noudpcsum tos inherit ttl 100
-	ip link set dev vx100 up
-
-	ip link set dev $swp1 master br0
-	ip link set dev vx100 master br0
-	bridge vlan add vid 100 dev vx100 pvid untagged
-
-	ip link add dev br1 type bridge vlan_filtering 0 mcast_snooping 0
-	ip link set dev br1 up
-
-	ip link add name vx200 type vxlan id 2000 local 192.0.2.17 dstport \
-		"$VXPORT" nolearning noudpcsum tos inherit ttl 100
-	ip link set dev vx200 up
-
-	ip link set dev $swp2 master br1
-	ip link set dev vx200 master br1 2>/dev/null
-	check_fail $? "802.1d and 802.1ad VxLANs at the same time not rejected"
-
-	ip link set dev vx200 master br1 2>&1 >/dev/null \
-		| grep -q mlxsw_spectrum
-	check_err $? "802.1d and 802.1ad VxLANs at the same time rejected without extack"
-
-	log_test "create 802.1d and 802.1ad VxLANs"
-
-	ip link del dev vx200
-	ip link del dev br1
-	ip link del dev vx100
-	ip link del dev br0
-}
-
-trap cleanup EXIT
-
-setup_prepare
-setup_wait
-
-tests_run
-
-exit $EXIT_STATUS