scsi: lpfc: Add enablement of multiple adapter dumps

Some adapters support the ability to hold multiple adapter dumps on the
adapter flash. Some adapters default to enabling this feature while others
default to single-dump.

Make support uniform by enabling dual dump by default.

Link: https://lore.kernel.org/r/20191105005708.7399-11-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/lpfc/lpfc_hw4.h

@@ -3530,6 +3530,7 @@ struct lpfc_sli4_parameters {
 
 #define LPFC_SET_UE_RECOVERY		0x10
 #define LPFC_SET_MDS_DIAGS		0x11
+#define LPFC_SET_DUAL_DUMP		0x1e
 struct lpfc_mbx_set_feature {
 	struct mbox_header header;
 	uint32_t feature;
@@ -3544,6 +3545,15 @@ struct lpfc_mbx_set_feature {
 #define lpfc_mbx_set_feature_mds_deep_loopbk_SHIFT  1
 #define lpfc_mbx_set_feature_mds_deep_loopbk_MASK   0x00000001
 #define lpfc_mbx_set_feature_mds_deep_loopbk_WORD   word6
+#define lpfc_mbx_set_feature_dd_SHIFT		0
+#define lpfc_mbx_set_feature_dd_MASK		0x00000001
+#define lpfc_mbx_set_feature_dd_WORD		word6
+#define lpfc_mbx_set_feature_ddquery_SHIFT	1
+#define lpfc_mbx_set_feature_ddquery_MASK	0x00000001
+#define lpfc_mbx_set_feature_ddquery_WORD	word6
+#define LPFC_DISABLE_DUAL_DUMP		0
+#define LPFC_ENABLE_DUAL_DUMP		1
+#define LPFC_QUERY_OP_DUAL_DUMP		2
 	uint32_t word7;
 #define lpfc_mbx_set_feature_UERP_SHIFT 0
 #define lpfc_mbx_set_feature_UERP_MASK  0x0000ffff

drivers/scsi/lpfc/lpfc_sli.c

@@ -6203,6 +6203,14 @@ lpfc_set_features(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbox,
 		mbox->u.mqe.un.set_feature.feature = LPFC_SET_MDS_DIAGS;
 		mbox->u.mqe.un.set_feature.param_len = 8;
 		break;
+	case LPFC_SET_DUAL_DUMP:
+		bf_set(lpfc_mbx_set_feature_dd,
+		       &mbox->u.mqe.un.set_feature, LPFC_ENABLE_DUAL_DUMP);
+		bf_set(lpfc_mbx_set_feature_ddquery,
+		       &mbox->u.mqe.un.set_feature, 0);
+		mbox->u.mqe.un.set_feature.feature = LPFC_SET_DUAL_DUMP;
+		mbox->u.mqe.un.set_feature.param_len = 4;
+		break;
 	}
 
 	return;
@@ -7200,7 +7208,7 @@ lpfc_post_rq_buffer(struct lpfc_hba *phba, struct lpfc_queue *hrq,
 int
 lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 {
-	int rc, i, cnt, len;
+	int rc, i, cnt, len, dd;
 	LPFC_MBOXQ_t *mboxq;
 	struct lpfc_mqe *mqe;
 	uint8_t *vpd;
@@ -7451,6 +7459,23 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 	phba->sli3_options |= (LPFC_SLI3_NPIV_ENABLED | LPFC_SLI3_HBQ_ENABLED);
 	spin_unlock_irq(&phba->hbalock);
 
+	/* Always try to enable dual dump feature if we can */
+	lpfc_set_features(phba, mboxq, LPFC_SET_DUAL_DUMP);
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	dd = bf_get(lpfc_mbx_set_feature_dd, &mboxq->u.mqe.un.set_feature);
+	if ((rc == MBX_SUCCESS) && (dd == LPFC_ENABLE_DUAL_DUMP))
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI | LOG_INIT,
+				"6448 Dual Dump is enabled\n");
+	else
+		lpfc_printf_log(phba, KERN_INFO, LOG_SLI | LOG_INIT,
+				"6447 Dual Dump Mailbox x%x (x%x/x%x) failed, "
+				"rc:x%x dd:x%x\n",
+				bf_get(lpfc_mqe_command, &mboxq->u.mqe),
+				lpfc_sli_config_mbox_subsys_get(
+					phba, mboxq),
+				lpfc_sli_config_mbox_opcode_get(
+					phba, mboxq),
+				rc, dd);
 	/*
 	 * Allocate all resources (xri,rpi,vpi,vfi) now.  Subsequent
 	 * calls depends on these resources to complete port setup.