提交 1703338c 编写于 作者: S Stephen Hemminger 提交者: David S. Miller

usbnet: convert asix driver to net_device_ops

Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 777baa47
......@@ -807,6 +807,18 @@ static int ax88172_link_reset(struct usbnet *dev)
return 0;
}
static const struct net_device_ops ax88172_netdev_ops = {
.ndo_open = usbnet_open,
.ndo_stop = usbnet_stop,
.ndo_start_xmit = usbnet_start_xmit,
.ndo_tx_timeout = usbnet_tx_timeout,
.ndo_change_mtu = usbnet_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
.ndo_do_ioctl = asix_ioctl,
.ndo_set_multicast_list = ax88172_set_multicast,
};
static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
{
int ret = 0;
......@@ -846,9 +858,8 @@ static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
dev->mii.phy_id_mask = 0x3f;
dev->mii.reg_num_mask = 0x1f;
dev->mii.phy_id = asix_get_phy_addr(dev);
dev->net->do_ioctl = asix_ioctl;
dev->net->set_multicast_list = ax88172_set_multicast;
dev->net->netdev_ops = &ax88172_netdev_ops;
dev->net->ethtool_ops = &ax88172_ethtool_ops;
asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
......@@ -898,6 +909,18 @@ static int ax88772_link_reset(struct usbnet *dev)
return 0;
}
static const struct net_device_ops ax88772_netdev_ops = {
.ndo_open = usbnet_open,
.ndo_stop = usbnet_stop,
.ndo_start_xmit = usbnet_start_xmit,
.ndo_tx_timeout = usbnet_tx_timeout,
.ndo_change_mtu = usbnet_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
.ndo_do_ioctl = asix_ioctl,
.ndo_set_multicast_list = asix_set_multicast,
};
static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
{
int ret, embd_phy;
......@@ -962,7 +985,6 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
dev->mii.mdio_write = asix_mdio_write;
dev->mii.phy_id_mask = 0x1f;
dev->mii.reg_num_mask = 0x1f;
dev->net->do_ioctl = asix_ioctl;
dev->mii.phy_id = asix_get_phy_addr(dev);
phyid = asix_get_phyid(dev);
......@@ -978,7 +1000,7 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
msleep(150);
dev->net->set_multicast_list = asix_set_multicast;
dev->net->netdev_ops = &ax88772_netdev_ops;
dev->net->ethtool_ops = &ax88772_ethtool_ops;
asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
......@@ -1181,6 +1203,18 @@ static int ax88178_change_mtu(struct net_device *net, int new_mtu)
return 0;
}
static const struct net_device_ops ax88178_netdev_ops = {
.ndo_open = usbnet_open,
.ndo_stop = usbnet_stop,
.ndo_start_xmit = usbnet_start_xmit,
.ndo_tx_timeout = usbnet_tx_timeout,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_multicast_list = asix_set_multicast,
.ndo_do_ioctl = asix_ioctl,
.ndo_change_mtu = ax88178_change_mtu,
};
static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
{
struct asix_data *data = (struct asix_data *)&dev->data;
......@@ -1247,11 +1281,10 @@ static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
dev->mii.phy_id_mask = 0x1f;
dev->mii.reg_num_mask = 0xff;
dev->mii.supports_gmii = 1;
dev->net->do_ioctl = asix_ioctl;
dev->mii.phy_id = asix_get_phy_addr(dev);
dev->net->set_multicast_list = asix_set_multicast;
dev->net->netdev_ops = &ax88178_netdev_ops;
dev->net->ethtool_ops = &ax88178_ethtool_ops;
dev->net->change_mtu = &ax88178_change_mtu;
phyid = asix_get_phyid(dev);
dbg("PHYID=0x%08x", phyid);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册