mfd: Add LM3533 lighting-power core driver

Add support for National Semiconductor / TI LM3533 lighting power chips.

This is the core driver which provides register access over I2C and
registers the ambient-light-sensor, LED and backlight sub-drivers.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Reviewed-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Documentation/ABI/testing/sysfs-bus-i2c-devices-lm3533

+What:		/sys/bus/i2c/devices/.../boost_freq
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the boost converter switching frequency (0, 1), where
+
+		0 -  500Hz
+		1 - 1000Hz
+
+What:		/sys/bus/i2c/devices/.../boost_ovp
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the boost converter over-voltage protection threshold
+		(0..3), where
+
+		0 - 16V
+		1 - 24V
+		2 - 32V
+		3 - 40V
+
+What:		/sys/bus/i2c/devices/.../output_hvled[n]
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the controlling backlight device for high-voltage current
+		sink HVLED[n] (n = 1, 2) (0, 1).
+
+What:		/sys/bus/i2c/devices/.../output_lvled[n]
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the controlling led device for low-voltage current sink
+		LVLED[n] (n = 1..5) (0..3).

drivers/mfd/Kconfig

@@ -106,6 +106,19 @@ config UCB1400_CORE
 	  To compile this driver as a module, choose M here: the
 	  module will be called ucb1400_core.
 
+config MFD_LM3533
+	tristate "LM3533 Lighting Power chip"
+	depends on I2C
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  Say yes here to enable support for National Semiconductor / TI
+	  LM3533 Lighting Power chips.
+
+	  This driver provides common support for accessing the device;
+	  additional drivers must be enabled in order to use the LED,
+	  backlight or ambient-light-sensor functionality of the device.
+
 config TPS6105X
 	tristate "TPS61050/61052 Boost Converters"
 	depends on I2C

drivers/mfd/Makefile

@@ -120,3 +120,4 @@ obj-$(CONFIG_MFD_INTEL_MSIC)	+= intel_msic.o
 obj-$(CONFIG_MFD_RC5T583)	+= rc5t583.o rc5t583-irq.o
 obj-$(CONFIG_MFD_S5M_CORE)	+= s5m-core.o s5m-irq.o
 obj-$(CONFIG_MFD_ANATOP)	+= anatop-mfd.o
+obj-$(CONFIG_MFD_LM3533)	+= lm3533-core.o lm3533-ctrlbank.o

drivers/mfd/lm3533-core.c

+/*
+ * lm3533-core.c -- LM3533 Core
+ *
+ * Copyright (C) 2011-2012 Texas Instruments
+ *
+ * Author: Johan Hovold <jhovold@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under  the terms of the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/regmap.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+
+#include <linux/mfd/lm3533.h>
+
+
+#define LM3533_BOOST_OVP_MAX		0x03
+#define LM3533_BOOST_OVP_MASK		0x06
+#define LM3533_BOOST_OVP_SHIFT		1
+
+#define LM3533_BOOST_FREQ_MAX		0x01
+#define LM3533_BOOST_FREQ_MASK		0x01
+#define LM3533_BOOST_FREQ_SHIFT		0
+
+#define LM3533_BL_ID_MASK		1
+#define LM3533_LED_ID_MASK		3
+#define LM3533_BL_ID_MAX		1
+#define LM3533_LED_ID_MAX		3
+
+#define LM3533_HVLED_ID_MAX		2
+#define LM3533_LVLED_ID_MAX		5
+
+#define LM3533_REG_OUTPUT_CONF1		0x10
+#define LM3533_REG_OUTPUT_CONF2		0x11
+#define LM3533_REG_BOOST_PWM		0x2c
+
+#define LM3533_REG_MAX			0xb2
+
+
+static struct mfd_cell lm3533_als_devs[] = {
+	{
+		.name	= "lm3533-als",
+		.id	= -1,
+	},
+};
+
+static struct mfd_cell lm3533_bl_devs[] = {
+	{
+		.name	= "lm3533-backlight",
+		.id	= 0,
+	},
+	{
+		.name	= "lm3533-backlight",
+		.id	= 1,
+	},
+};
+
+static struct mfd_cell lm3533_led_devs[] = {
+	{
+		.name	= "lm3533-leds",
+		.id	= 0,
+	},
+	{
+		.name	= "lm3533-leds",
+		.id	= 1,
+	},
+	{
+		.name	= "lm3533-leds",
+		.id	= 2,
+	},
+	{
+		.name	= "lm3533-leds",
+		.id	= 3,
+	},
+};
+
+int lm3533_read(struct lm3533 *lm3533, u8 reg, u8 *val)
+{
+	int tmp;
+	int ret;
+
+	ret = regmap_read(lm3533->regmap, reg, &tmp);
+	if (ret < 0) {
+		dev_err(lm3533->dev, "failed to read register %02x: %d\n",
+								reg, ret);
+		return ret;
+	}
+
+	*val = tmp;
+
+	dev_dbg(lm3533->dev, "read [%02x]: %02x\n", reg, *val);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(lm3533_read);
+
+int lm3533_write(struct lm3533 *lm3533, u8 reg, u8 val)
+{
+	int ret;
+
+	dev_dbg(lm3533->dev, "write [%02x]: %02x\n", reg, val);
+
+	ret = regmap_write(lm3533->regmap, reg, val);
+	if (ret < 0) {
+		dev_err(lm3533->dev, "failed to write register %02x: %d\n",
+								reg, ret);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(lm3533_write);
+
+int lm3533_update(struct lm3533 *lm3533, u8 reg, u8 val, u8 mask)
+{
+	int ret;
+
+	dev_dbg(lm3533->dev, "update [%02x]: %02x/%02x\n", reg, val, mask);
+
+	ret = regmap_update_bits(lm3533->regmap, reg, val, mask);
+	if (ret < 0) {
+		dev_err(lm3533->dev, "failed to update register %02x: %d\n",
+								reg, ret);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(lm3533_update);
+
+/*
+ * HVLED output config -- output hvled controlled by backlight bl
+ */
+static int lm3533_set_hvled_config(struct lm3533 *lm3533, u8 hvled, u8 bl)
+{
+	u8 val;
+	u8 mask;
+	int shift;
+	int ret;
+
+	if (hvled == 0 || hvled > LM3533_HVLED_ID_MAX)
+		return -EINVAL;
+
+	if (bl > LM3533_BL_ID_MAX)
+		return -EINVAL;
+
+	shift = hvled - 1;
+	mask = LM3533_BL_ID_MASK << shift;
+	val = bl << shift;
+
+	ret = lm3533_update(lm3533, LM3533_REG_OUTPUT_CONF1, val, mask);
+	if (ret)
+		dev_err(lm3533->dev, "failed to set hvled config\n");
+
+	return ret;
+}
+
+/*
+ * LVLED output config -- output lvled controlled by LED led
+ */
+static int lm3533_set_lvled_config(struct lm3533 *lm3533, u8 lvled, u8 led)
+{
+	u8 reg;
+	u8 val;
+	u8 mask;
+	int shift;
+	int ret;
+
+	if (lvled == 0 || lvled > LM3533_LVLED_ID_MAX)
+		return -EINVAL;
+
+	if (led > LM3533_LED_ID_MAX)
+		return -EINVAL;
+
+	if (lvled < 4) {
+		reg = LM3533_REG_OUTPUT_CONF1;
+		shift = 2 * lvled;
+	} else {
+		reg = LM3533_REG_OUTPUT_CONF2;
+		shift = 2 * (lvled - 4);
+	}
+
+	mask = LM3533_LED_ID_MASK << shift;
+	val = led << shift;
+
+	ret = lm3533_update(lm3533, reg, val, mask);
+	if (ret)
+		dev_err(lm3533->dev, "failed to set lvled config\n");
+
+	return ret;
+}
+
+static void lm3533_enable(struct lm3533 *lm3533)
+{
+	if (gpio_is_valid(lm3533->gpio_hwen))
+		gpio_set_value(lm3533->gpio_hwen, 1);
+}
+
+static void lm3533_disable(struct lm3533 *lm3533)
+{
+	if (gpio_is_valid(lm3533->gpio_hwen))
+		gpio_set_value(lm3533->gpio_hwen, 0);
+}
+
+enum lm3533_attribute_type {
+	LM3533_ATTR_TYPE_BACKLIGHT,
+	LM3533_ATTR_TYPE_LED,
+};
+
+struct lm3533_device_attribute {
+	struct device_attribute dev_attr;
+	enum lm3533_attribute_type type;
+	union {
+		struct {
+			u8 id;
+		} output;
+		struct {
+			u8 reg;
+			u8 shift;
+			u8 mask;
+			u8 max;
+		} generic;
+	} u;
+};
+
+#define to_lm3533_dev_attr(_attr) \
+	container_of(_attr, struct lm3533_device_attribute, dev_attr)
+
+static ssize_t show_lm3533_reg(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct lm3533 *lm3533 = dev_get_drvdata(dev);
+	struct lm3533_device_attribute *lattr = to_lm3533_dev_attr(attr);
+	u8 val;
+	int ret;
+
+	ret = lm3533_read(lm3533, lattr->u.generic.reg, &val);
+	if (ret)
+		return ret;
+
+	val = (val & lattr->u.generic.mask) >> lattr->u.generic.shift;
+
+	return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+}
+
+static ssize_t store_lm3533_reg(struct device *dev,
+						struct device_attribute *attr,
+						const char *buf, size_t len)
+{
+	struct lm3533 *lm3533 = dev_get_drvdata(dev);
+	struct lm3533_device_attribute *lattr = to_lm3533_dev_attr(attr);
+	u8 val;
+	int ret;
+
+	if (kstrtou8(buf, 0, &val) || val > lattr->u.generic.max)
+		return -EINVAL;
+
+	val = val << lattr->u.generic.shift;
+	ret = lm3533_update(lm3533, lattr->u.generic.reg, val,
+							lattr->u.generic.mask);
+	if (ret)
+		return ret;
+
+	return len;
+}
+
+#define GENERIC_ATTR(_reg, _max, _mask, _shift) \
+	{ .reg		= _reg, \
+	  .max		= _max, \
+	  .mask		= _mask, \
+	  .shift	= _shift }
+
+#define LM3533_GENERIC_ATTR(_name, _mode, _show, _store, _type,	\
+						_reg, _max, _mask, _shift) \
+	struct lm3533_device_attribute lm3533_dev_attr_##_name = { \
+		.dev_attr	= __ATTR(_name, _mode, _show, _store), \
+		.type		= _type, \
+		.u.generic	= GENERIC_ATTR(_reg, _max, _mask, _shift) }
+
+#define LM3533_GENERIC_ATTR_RW(_name, _type, _reg, _max, _mask, _shift) \
+	LM3533_GENERIC_ATTR(_name, S_IRUGO | S_IWUSR, \
+					show_lm3533_reg, store_lm3533_reg, \
+					_type, _reg, _max, _mask, _shift)
+
+#define LM3533_BOOST_ATTR_RW(_name, _NAME) \
+	LM3533_GENERIC_ATTR_RW(_name, LM3533_ATTR_TYPE_BACKLIGHT, \
+				LM3533_REG_BOOST_PWM, LM3533_##_NAME##_MAX, \
+				LM3533_##_NAME##_MASK, LM3533_##_NAME##_SHIFT)
+/*
+ * Boost Over Voltage Protection Select
+ *
+ *   0 - 16 V (default)
+ *   1 - 24 V
+ *   2 - 32 V
+ *   3 - 40 V
+ */
+static LM3533_BOOST_ATTR_RW(boost_ovp, BOOST_OVP);
+
+/*
+ * Boost Frequency Select
+ *
+ *   0 - 500 kHz (default)
+ *   1 - 1 MHz
+ */
+static LM3533_BOOST_ATTR_RW(boost_freq, BOOST_FREQ);
+
+static ssize_t show_output(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct lm3533 *lm3533 = dev_get_drvdata(dev);
+	struct lm3533_device_attribute *lattr = to_lm3533_dev_attr(attr);
+	int id = lattr->u.output.id;
+	u8 reg;
+	u8 val;
+	u8 mask;
+	int shift;
+	int ret;
+
+	if (lattr->type == LM3533_ATTR_TYPE_BACKLIGHT) {
+		reg = LM3533_REG_OUTPUT_CONF1;
+		shift = id - 1;
+		mask = LM3533_BL_ID_MASK << shift;
+	} else {
+		if (id < 4) {
+			reg = LM3533_REG_OUTPUT_CONF1;
+			shift = 2 * id;
+		} else {
+			reg = LM3533_REG_OUTPUT_CONF2;
+			shift = 2 * (id - 4);
+		}
+		mask = LM3533_LED_ID_MASK << shift;
+	}
+
+	ret = lm3533_read(lm3533, reg, &val);
+	if (ret)
+		return ret;
+
+	val = (val & mask) >> shift;
+
+	return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+}
+
+static ssize_t store_output(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t len)
+{
+	struct lm3533 *lm3533 = dev_get_drvdata(dev);
+	struct lm3533_device_attribute *lattr = to_lm3533_dev_attr(attr);
+	int id = lattr->u.output.id;
+	u8 val;
+	int ret;
+
+	if (kstrtou8(buf, 0, &val))
+		return -EINVAL;
+
+	if (lattr->type == LM3533_ATTR_TYPE_BACKLIGHT)
+		ret = lm3533_set_hvled_config(lm3533, id, val);
+	else
+		ret = lm3533_set_lvled_config(lm3533, id, val);
+
+	if (ret)
+		return ret;
+
+	return len;
+}
+
+#define LM3533_OUTPUT_ATTR(_name, _mode, _show, _store, _type, _id) \
+	struct lm3533_device_attribute lm3533_dev_attr_##_name = \
+		{ .dev_attr	= __ATTR(_name, _mode, _show, _store), \
+		  .type		= _type, \
+		  .u.output	= { .id = _id }, }
+
+#define LM3533_OUTPUT_ATTR_RW(_name, _type, _id) \
+	LM3533_OUTPUT_ATTR(output_##_name, S_IRUGO | S_IWUSR, \
+					show_output, store_output, _type, _id)
+
+#define LM3533_OUTPUT_HVLED_ATTR_RW(_nr) \
+	LM3533_OUTPUT_ATTR_RW(hvled##_nr, LM3533_ATTR_TYPE_BACKLIGHT, _nr)
+#define LM3533_OUTPUT_LVLED_ATTR_RW(_nr) \
+	LM3533_OUTPUT_ATTR_RW(lvled##_nr, LM3533_ATTR_TYPE_LED, _nr)
+/*
+ * Output config:
+ *
+ * output_hvled<nr>	0-1
+ * output_lvled<nr>	0-3
+ */
+static LM3533_OUTPUT_HVLED_ATTR_RW(1);
+static LM3533_OUTPUT_HVLED_ATTR_RW(2);
+static LM3533_OUTPUT_LVLED_ATTR_RW(1);
+static LM3533_OUTPUT_LVLED_ATTR_RW(2);
+static LM3533_OUTPUT_LVLED_ATTR_RW(3);
+static LM3533_OUTPUT_LVLED_ATTR_RW(4);
+static LM3533_OUTPUT_LVLED_ATTR_RW(5);
+
+static struct attribute *lm3533_attributes[] = {
+	&lm3533_dev_attr_boost_freq.dev_attr.attr,
+	&lm3533_dev_attr_boost_ovp.dev_attr.attr,
+	&lm3533_dev_attr_output_hvled1.dev_attr.attr,
+	&lm3533_dev_attr_output_hvled2.dev_attr.attr,
+	&lm3533_dev_attr_output_lvled1.dev_attr.attr,
+	&lm3533_dev_attr_output_lvled2.dev_attr.attr,
+	&lm3533_dev_attr_output_lvled3.dev_attr.attr,
+	&lm3533_dev_attr_output_lvled4.dev_attr.attr,
+	&lm3533_dev_attr_output_lvled5.dev_attr.attr,
+	NULL,
+};
+
+#define to_dev_attr(_attr) \
+	container_of(_attr, struct device_attribute, attr)
+
+static mode_t lm3533_attr_is_visible(struct kobject *kobj,
+					     struct attribute *attr, int n)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct lm3533 *lm3533 = dev_get_drvdata(dev);
+	struct device_attribute *dattr = to_dev_attr(attr);
+	struct lm3533_device_attribute *lattr = to_lm3533_dev_attr(dattr);
+	enum lm3533_attribute_type type = lattr->type;
+	mode_t mode = attr->mode;
+
+	if (!lm3533->have_backlights && type == LM3533_ATTR_TYPE_BACKLIGHT)
+		mode = 0;
+	else if (!lm3533->have_leds && type == LM3533_ATTR_TYPE_LED)
+		mode = 0;
+
+	return mode;
+};
+
+static struct attribute_group lm3533_attribute_group = {
+	.is_visible	= lm3533_attr_is_visible,
+	.attrs		= lm3533_attributes
+};
+
+static int __devinit lm3533_device_als_init(struct lm3533 *lm3533)
+{
+	struct lm3533_platform_data *pdata = lm3533->dev->platform_data;
+	int ret;
+
+	if (!pdata->als)
+		return 0;
+
+	lm3533_als_devs[0].platform_data = pdata->als;
+	lm3533_als_devs[0].pdata_size = sizeof(*pdata->als);
+
+	ret = mfd_add_devices(lm3533->dev, 0, lm3533_als_devs, 1, NULL, 0);
+	if (ret) {
+		dev_err(lm3533->dev, "failed to add ALS device\n");
+		return ret;
+	}
+
+	lm3533->have_als = 1;
+
+	return 0;
+}
+
+static int __devinit lm3533_device_bl_init(struct lm3533 *lm3533)
+{
+	struct lm3533_platform_data *pdata = lm3533->dev->platform_data;
+	int i;
+	int ret;
+
+	if (!pdata->backlights || pdata->num_backlights == 0)
+		return 0;
+
+	if (pdata->num_backlights > ARRAY_SIZE(lm3533_bl_devs))
+		pdata->num_backlights = ARRAY_SIZE(lm3533_bl_devs);
+
+	for (i = 0; i < pdata->num_backlights; ++i) {
+		lm3533_bl_devs[i].platform_data = &pdata->backlights[i];
+		lm3533_bl_devs[i].pdata_size = sizeof(pdata->backlights[i]);
+	}
+
+	ret = mfd_add_devices(lm3533->dev, 0, lm3533_bl_devs,
+					pdata->num_backlights, NULL, 0);
+	if (ret) {
+		dev_err(lm3533->dev, "failed to add backlight devices\n");
+		return ret;
+	}
+
+	lm3533->have_backlights = 1;
+
+	return 0;
+}
+
+static int __devinit lm3533_device_led_init(struct lm3533 *lm3533)
+{
+	struct lm3533_platform_data *pdata = lm3533->dev->platform_data;
+	int i;
+	int ret;
+
+	if (!pdata->leds || pdata->num_leds == 0)
+		return 0;
+
+	if (pdata->num_leds > ARRAY_SIZE(lm3533_led_devs))
+		pdata->num_leds = ARRAY_SIZE(lm3533_led_devs);
+
+	for (i = 0; i < pdata->num_leds; ++i) {
+		lm3533_led_devs[i].platform_data = &pdata->leds[i];
+		lm3533_led_devs[i].pdata_size = sizeof(pdata->leds[i]);
+	}
+
+	ret = mfd_add_devices(lm3533->dev, 0, lm3533_led_devs,
+						pdata->num_leds, NULL, 0);
+	if (ret) {
+		dev_err(lm3533->dev, "failed to add LED devices\n");
+		return ret;
+	}
+
+	lm3533->have_leds = 1;
+
+	return 0;
+}
+
+static int __devinit lm3533_device_init(struct lm3533 *lm3533)
+{
+	struct lm3533_platform_data *pdata = lm3533->dev->platform_data;
+	int ret;
+
+	dev_dbg(lm3533->dev, "%s\n", __func__);
+
+	if (!pdata) {
+		dev_err(lm3533->dev, "no platform data\n");
+		return -EINVAL;
+	}
+
+	lm3533->gpio_hwen = pdata->gpio_hwen;
+
+	dev_set_drvdata(lm3533->dev, lm3533);
+
+	if (gpio_is_valid(lm3533->gpio_hwen)) {
+		ret = gpio_request_one(lm3533->gpio_hwen, GPIOF_OUT_INIT_LOW,
+								"lm3533-hwen");
+		if (ret < 0) {
+			dev_err(lm3533->dev,
+				"failed to request HWEN GPIO %d\n",
+				lm3533->gpio_hwen);
+			return ret;
+		}
+	}
+
+	lm3533_enable(lm3533);
+
+	lm3533_device_als_init(lm3533);
+	lm3533_device_bl_init(lm3533);
+	lm3533_device_led_init(lm3533);
+
+	ret = sysfs_create_group(&lm3533->dev->kobj, &lm3533_attribute_group);
+	if (ret < 0) {
+		dev_err(lm3533->dev, "failed to create sysfs attributes\n");
+		goto err_unregister;
+	}
+
+	return 0;
+
+err_unregister:
+	mfd_remove_devices(lm3533->dev);
+	lm3533_disable(lm3533);
+	if (gpio_is_valid(lm3533->gpio_hwen))
+		gpio_free(lm3533->gpio_hwen);
+
+	return ret;
+}
+
+static void __devexit lm3533_device_exit(struct lm3533 *lm3533)
+{
+	dev_dbg(lm3533->dev, "%s\n", __func__);
+
+	sysfs_remove_group(&lm3533->dev->kobj, &lm3533_attribute_group);
+
+	mfd_remove_devices(lm3533->dev);
+	lm3533_disable(lm3533);
+	if (gpio_is_valid(lm3533->gpio_hwen))
+		gpio_free(lm3533->gpio_hwen);
+}
+
+static bool lm3533_readable_register(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case 0x10 ... 0x2c:
+	case 0x30 ... 0x38:
+	case 0x40 ... 0x45:
+	case 0x50 ... 0x57:
+	case 0x60 ... 0x6e:
+	case 0x70 ... 0x75:
+	case 0x80 ... 0x85:
+	case 0x90 ... 0x95:
+	case 0xa0 ... 0xa5:
+	case 0xb0 ... 0xb2:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool lm3533_volatile_register(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case 0x34:		/* zone */
+	case 0x37 ... 0x38:	/* adc */
+	case 0xb0 ... 0xb1:	/* fault */
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool lm3533_precious_register(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case 0x34:		/* zone */
+		return true;
+	default:
+		return false;
+	}
+}
+
+static struct regmap_config regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.max_register	= LM3533_REG_MAX,
+	.readable_reg	= lm3533_readable_register,
+	.volatile_reg	= lm3533_volatile_register,
+	.precious_reg	= lm3533_precious_register,
+};
+
+static int __devinit lm3533_i2c_probe(struct i2c_client *i2c,
+					const struct i2c_device_id *id)
+{
+	struct lm3533 *lm3533;
+	int ret;
+
+	dev_dbg(&i2c->dev, "%s\n", __func__);
+
+	lm3533 = kzalloc(sizeof(*lm3533), GFP_KERNEL);
+	if (!lm3533)
+		return -ENOMEM;
+
+	i2c_set_clientdata(i2c, lm3533);
+
+	lm3533->regmap = regmap_init_i2c(i2c, &regmap_config);
+	if (IS_ERR(lm3533->regmap)) {
+		ret = PTR_ERR(lm3533->regmap);
+		goto err_regmap;
+	}
+
+	lm3533->dev = &i2c->dev;
+	lm3533->irq = i2c->irq;
+
+	ret = lm3533_device_init(lm3533);
+	if (ret)
+		goto err_dev;
+
+	return 0;
+
+err_dev:
+	regmap_exit(lm3533->regmap);
+err_regmap:
+	kfree(lm3533);
+
+	return ret;
+}
+
+static int __devexit lm3533_i2c_remove(struct i2c_client *i2c)
+{
+	struct lm3533 *lm3533 = i2c_get_clientdata(i2c);
+
+	dev_dbg(&i2c->dev, "%s\n", __func__);
+
+	lm3533_device_exit(lm3533);
+	regmap_exit(lm3533->regmap);
+
+	kfree(lm3533);
+
+	return 0;
+}
+
+static const struct i2c_device_id lm3533_i2c_ids[] = {
+	{ "lm3533", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, lm3533_i2c_ids);
+
+static struct i2c_driver lm3533_i2c_driver = {
+	.driver = {
+		   .name = "lm3533",
+		   .owner = THIS_MODULE,
+	},
+	.id_table	= lm3533_i2c_ids,
+	.probe		= lm3533_i2c_probe,
+	.remove		= __devexit_p(lm3533_i2c_remove),
+};
+
+static int __init lm3533_i2c_init(void)
+{
+	return i2c_add_driver(&lm3533_i2c_driver);
+}
+subsys_initcall(lm3533_i2c_init);
+
+static void __exit lm3533_i2c_exit(void)
+{
+	i2c_del_driver(&lm3533_i2c_driver);
+}
+module_exit(lm3533_i2c_exit);
+
+MODULE_AUTHOR("Johan Hovold <jhovold@gmail.com>");
+MODULE_DESCRIPTION("LM3533 Core");
+MODULE_LICENSE("GPL");

drivers/mfd/lm3533-ctrlbank.c

+/*
+ * lm3533-ctrlbank.c -- LM3533 Generic Control Bank interface
+ *
+ * Copyright (C) 2011-2012 Texas Instruments
+ *
+ * Author: Johan Hovold <jhovold@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under  the terms of the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+
+#include <linux/mfd/lm3533.h>
+
+
+#define LM3533_BRIGHTNESS_MAX		255
+#define LM3533_MAX_CURRENT_MAX		31
+#define LM3533_PWM_MAX			0x3f
+
+#define LM3533_REG_PWM_BASE		0x14
+#define LM3533_REG_MAX_CURRENT_BASE	0x1f
+#define LM3533_REG_CTRLBANK_ENABLE	0x27
+#define LM3533_REG_BRIGHTNESS_BASE	0x40
+
+
+static inline u8 lm3533_ctrlbank_get_reg(struct lm3533_ctrlbank *cb, u8 base)
+{
+	return base + cb->id;
+}
+
+int lm3533_ctrlbank_enable(struct lm3533_ctrlbank *cb)
+{
+	u8 mask;
+	int ret;
+
+	dev_dbg(cb->dev, "%s - %d\n", __func__, cb->id);
+
+	mask = 1 << cb->id;
+	ret = lm3533_update(cb->lm3533, LM3533_REG_CTRLBANK_ENABLE,
+								mask, mask);
+	if (ret)
+		dev_err(cb->dev, "failed to enable ctrlbank %d\n", cb->id);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(lm3533_ctrlbank_enable);
+
+int lm3533_ctrlbank_disable(struct lm3533_ctrlbank *cb)
+{
+	u8 mask;
+	int ret;
+
+	dev_dbg(cb->dev, "%s - %d\n", __func__, cb->id);
+
+	mask = 1 << cb->id;
+	ret = lm3533_update(cb->lm3533, LM3533_REG_CTRLBANK_ENABLE, 0, mask);
+	if (ret)
+		dev_err(cb->dev, "failed to disable ctrlbank %d\n", cb->id);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(lm3533_ctrlbank_disable);
+
+#define lm3533_ctrlbank_set(_name, _NAME)				\
+int lm3533_ctrlbank_set_##_name(struct lm3533_ctrlbank *cb, u8 val)	\
+{									\
+	u8 reg;								\
+	int ret;							\
+									\
+	if (val > LM3533_##_NAME##_MAX)					\
+		return -EINVAL;						\
+									\
+	reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_##_NAME##_BASE);	\
+	ret = lm3533_write(cb->lm3533, reg, val);			\
+	if (ret)							\
+		dev_err(cb->dev, "failed to set " #_name "\n");		\
+									\
+	return ret;							\
+}									\
+EXPORT_SYMBOL_GPL(lm3533_ctrlbank_set_##_name);
+
+#define lm3533_ctrlbank_get(_name, _NAME)				\
+int lm3533_ctrlbank_get_##_name(struct lm3533_ctrlbank *cb, u8 *val)	\
+{									\
+	u8 reg;								\
+	int ret;							\
+									\
+	reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_##_NAME##_BASE);	\
+	ret = lm3533_read(cb->lm3533, reg, val);			\
+	if (ret)							\
+		dev_err(cb->dev, "failed to get " #_name "\n");		\
+									\
+	return ret;							\
+}									\
+EXPORT_SYMBOL_GPL(lm3533_ctrlbank_get_##_name);
+
+lm3533_ctrlbank_set(brightness, BRIGHTNESS);
+lm3533_ctrlbank_get(brightness, BRIGHTNESS);
+
+/*
+ * Full scale current.
+ *
+ * Imax = 5 + val * 0.8 mA, e.g.:
+ *
+ *    0 - 5 mA
+ *     ...
+ *   19 - 20.2 mA (default)
+ *     ...
+ *   31 - 29.8 mA
+ */
+lm3533_ctrlbank_set(max_current, MAX_CURRENT);
+lm3533_ctrlbank_get(max_current, MAX_CURRENT);
+
+/*
+ * PWM-input control mask:
+ *
+ *   bit 5 - PWM-input enabled in Zone 4
+ *   bit 4 - PWM-input enabled in Zone 3
+ *   bit 3 - PWM-input enabled in Zone 2
+ *   bit 2 - PWM-input enabled in Zone 1
+ *   bit 1 - PWM-input enabled in Zone 0
+ *   bit 0 - PWM-input enabled
+ */
+lm3533_ctrlbank_set(pwm, PWM);
+lm3533_ctrlbank_get(pwm, PWM);
+
+
+MODULE_AUTHOR("Johan Hovold <jhovold@gmail.com>");
+MODULE_DESCRIPTION("LM3533 Control Bank interface");
+MODULE_LICENSE("GPL");

include/linux/mfd/lm3533.h

+/*
+ * lm3533.h -- LM3533 interface
+ *
+ * Copyright (C) 2011-2012 Texas Instruments
+ *
+ * Author: Johan Hovold <jhovold@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under  the terms of the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __LINUX_MFD_LM3533_H
+#define __LINUX_MFD_LM3533_H
+
+#define LM3533_ATTR_RO(_name) \
+	DEVICE_ATTR(_name, S_IRUGO, show_##_name, NULL)
+#define LM3533_ATTR_RW(_name) \
+	DEVICE_ATTR(_name, S_IRUGO | S_IWUSR , show_##_name, store_##_name)
+
+struct device;
+struct regmap;
+
+struct lm3533 {
+	struct device *dev;
+
+	struct regmap *regmap;
+
+	int gpio_hwen;
+	int irq;
+
+	unsigned have_als:1;
+	unsigned have_backlights:1;
+	unsigned have_leds:1;
+};
+
+struct lm3533_ctrlbank {
+	struct lm3533 *lm3533;
+	struct device *dev;
+	int id;
+};
+
+struct lm3533_als_platform_data {
+	unsigned pwm_mode:1;		/* PWM input mode (default analog) */
+};
+
+struct lm3533_bl_platform_data {
+	char *name;
+	u8 default_brightness;		/* 0 - 255 */
+	u8 max_current;			/* 0 - 31 */
+	u8 pwm;				/* 0 - 0x3f */
+};
+
+struct lm3533_led_platform_data {
+	char *name;
+	const char *default_trigger;
+	u8 max_current;			/* 0 - 31 */
+	u8 pwm;				/* 0 - 0x3f */
+};
+
+struct lm3533_platform_data {
+	int gpio_hwen;
+
+	struct lm3533_als_platform_data *als;
+
+	struct lm3533_bl_platform_data *backlights;
+	int num_backlights;
+
+	struct lm3533_led_platform_data *leds;
+	int num_leds;
+};
+
+extern int lm3533_ctrlbank_enable(struct lm3533_ctrlbank *cb);
+extern int lm3533_ctrlbank_disable(struct lm3533_ctrlbank *cb);
+
+extern int lm3533_ctrlbank_set_brightness(struct lm3533_ctrlbank *cb, u8 val);
+extern int lm3533_ctrlbank_get_brightness(struct lm3533_ctrlbank *cb, u8 *val);
+extern int lm3533_ctrlbank_set_max_current(struct lm3533_ctrlbank *cb, u8 val);
+extern int lm3533_ctrlbank_get_max_current(struct lm3533_ctrlbank *cb,
+								u8 *val);
+extern int lm3533_ctrlbank_set_pwm(struct lm3533_ctrlbank *cb, u8 val);
+extern int lm3533_ctrlbank_get_pwm(struct lm3533_ctrlbank *cb, u8 *val);
+
+extern int lm3533_read(struct lm3533 *lm3533, u8 reg, u8 *val);
+extern int lm3533_write(struct lm3533 *lm3533, u8 reg, u8 val);
+extern int lm3533_update(struct lm3533 *lm3533, u8 reg, u8 val, u8 mask);
+
+#endif	/* __LINUX_MFD_LM3533_H */