mmc: dw_mmc: remove the quirks flags

Remove the quirks flag. (DW_MCI_QUIRK_BROKEN_DTO)
For removing this, enabled the dto_timer by defaults.
It doesn't see any I/O performance degression.
In future, dwmmc controller should not use the quirks flag.
Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: NShawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

drivers/mmc/host/dw_mmc-rockchip.c

@@ -285,9 +285,6 @@ static int dw_mci_rockchip_init(struct dw_mci *host)
 	/* It is slot 8 on Rockchip SoCs */
 	host->sdio_id0 = 8;
 
-	/* It needs this quirk on all Rockchip SoCs */
-	host->pdata->quirks |= DW_MCI_QUIRK_BROKEN_DTO;
-
 	if (of_device_is_compatible(host->dev->of_node,
 				    "rockchip,rk3288-dw-mshc"))
 		host->bus_hz /= RK3288_CLKGEN_DIV;

drivers/mmc/host/dw_mmc.c

@@ -1824,8 +1824,7 @@ static void dw_mci_tasklet_func(unsigned long priv)
 				 * If all data-related interrupts don't come
 				 * within the given time in reading data state.
 				 */
-				if ((host->quirks & DW_MCI_QUIRK_BROKEN_DTO) &&
-				    (host->dir_status == DW_MCI_RECV_STATUS))
+				if (host->dir_status == DW_MCI_RECV_STATUS)
 					dw_mci_set_drto(host);
 				break;
 			}
@@ -1867,8 +1866,7 @@ static void dw_mci_tasklet_func(unsigned long priv)
 				 * interrupt doesn't come within the given time.
 				 * in reading data state.
 				 */
-				if ((host->quirks & DW_MCI_QUIRK_BROKEN_DTO) &&
-				    (host->dir_status == DW_MCI_RECV_STATUS))
+				if (host->dir_status == DW_MCI_RECV_STATUS)
 					dw_mci_set_drto(host);
 				break;
 			}
@@ -2434,8 +2432,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
 		}
 
 		if (pending & SDMMC_INT_DATA_OVER) {
-			if (host->quirks & DW_MCI_QUIRK_BROKEN_DTO)
-				del_timer(&host->dto_timer);
+			del_timer(&host->dto_timer);
 
 			mci_writel(host, RINTSTS, SDMMC_INT_DATA_OVER);
 			if (!host->data_status)
@@ -3026,11 +3023,8 @@ int dw_mci_probe(struct dw_mci *host)
 	setup_timer(&host->cmd11_timer,
 		    dw_mci_cmd11_timer, (unsigned long)host);
 
-	host->quirks = host->pdata->quirks;
-
-	if (host->quirks & DW_MCI_QUIRK_BROKEN_DTO)
-		setup_timer(&host->dto_timer,
-			    dw_mci_dto_timer, (unsigned long)host);
+	setup_timer(&host->dto_timer,
+		    dw_mci_dto_timer, (unsigned long)host);
 
 	spin_lock_init(&host->lock);
 	spin_lock_init(&host->irq_lock);

include/linux/mmc/dw_mmc.h

@@ -112,7 +112,6 @@ struct dw_mci_dma_slave {
  * @part_buf: Simple buffer for partial fifo reads/writes.
  * @push_data: Pointer to FIFO push function.
  * @pull_data: Pointer to FIFO pull function.
- * @quirks: Set of quirks that apply to specific versions of the IP.
  * @vqmmc_enabled: Status of vqmmc, should be true or false.
  * @irq_flags: The flags to be passed to request_irq.
  * @irq: The irq value to be passed to request_irq.
@@ -218,9 +217,6 @@ struct dw_mci {
 	void (*push_data)(struct dw_mci *host, void *buf, int cnt);
 	void (*pull_data)(struct dw_mci *host, void *buf, int cnt);
 
-	/* Workaround flags */
-	u32			quirks;
-
 	bool			vqmmc_enabled;
 	unsigned long		irq_flags; /* IRQ flags */
 	int			irq;
@@ -242,17 +238,12 @@ struct dw_mci_dma_ops {
 	void (*exit)(struct dw_mci *host);
 };
 
-/* IP Quirks/flags. */
-/* Timer for broken data transfer over scheme */
-#define DW_MCI_QUIRK_BROKEN_DTO			BIT(0)
-
 struct dma_pdata;
 
 /* Board platform data */
 struct dw_mci_board {
 	u32 num_slots;
 
-	u32 quirks; /* Workaround / Quirk flags */
 	unsigned int bus_hz; /* Clock speed at the cclk_in pad */
 
 	u32 caps;	/* Capabilities */