提交 1685e785 编写于 作者: P Philippe Reynes 提交者: David S. Miller

net: stmmac: use new api ethtool_{get|set}_link_ksettings

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 d6d50c7e
......@@ -269,8 +269,8 @@ static void stmmac_ethtool_getdrvinfo(struct net_device *dev,
strlcpy(info->version, DRV_MODULE_VERSION, sizeof(info->version));
}
static int stmmac_ethtool_getsettings(struct net_device *dev,
struct ethtool_cmd *cmd)
static int stmmac_ethtool_get_link_ksettings(struct net_device *dev,
struct ethtool_link_ksettings *cmd)
{
struct stmmac_priv *priv = netdev_priv(dev);
struct phy_device *phy = dev->phydev;
......@@ -279,15 +279,16 @@ static int stmmac_ethtool_getsettings(struct net_device *dev,
if (priv->hw->pcs & STMMAC_PCS_RGMII ||
priv->hw->pcs & STMMAC_PCS_SGMII) {
struct rgmii_adv adv;
u32 supported, advertising, lp_advertising;
if (!priv->xstats.pcs_link) {
ethtool_cmd_speed_set(cmd, SPEED_UNKNOWN);
cmd->duplex = DUPLEX_UNKNOWN;
cmd->base.speed = SPEED_UNKNOWN;
cmd->base.duplex = DUPLEX_UNKNOWN;
return 0;
}
cmd->duplex = priv->xstats.pcs_duplex;
cmd->base.duplex = priv->xstats.pcs_duplex;
ethtool_cmd_speed_set(cmd, priv->xstats.pcs_speed);
cmd->base.speed = priv->xstats.pcs_speed;
/* Get and convert ADV/LP_ADV from the HW AN registers */
if (!priv->hw->mac->pcs_get_adv_lp)
......@@ -297,45 +298,59 @@ static int stmmac_ethtool_getsettings(struct net_device *dev,
/* Encoding of PSE bits is defined in 802.3z, 37.2.1.4 */
ethtool_convert_link_mode_to_legacy_u32(
&supported, cmd->link_modes.supported);
ethtool_convert_link_mode_to_legacy_u32(
&advertising, cmd->link_modes.advertising);
ethtool_convert_link_mode_to_legacy_u32(
&lp_advertising, cmd->link_modes.lp_advertising);
if (adv.pause & STMMAC_PCS_PAUSE)
cmd->advertising |= ADVERTISED_Pause;
advertising |= ADVERTISED_Pause;
if (adv.pause & STMMAC_PCS_ASYM_PAUSE)
cmd->advertising |= ADVERTISED_Asym_Pause;
advertising |= ADVERTISED_Asym_Pause;
if (adv.lp_pause & STMMAC_PCS_PAUSE)
cmd->lp_advertising |= ADVERTISED_Pause;
lp_advertising |= ADVERTISED_Pause;
if (adv.lp_pause & STMMAC_PCS_ASYM_PAUSE)
cmd->lp_advertising |= ADVERTISED_Asym_Pause;
lp_advertising |= ADVERTISED_Asym_Pause;
/* Reg49[3] always set because ANE is always supported */
cmd->autoneg = ADVERTISED_Autoneg;
cmd->supported |= SUPPORTED_Autoneg;
cmd->advertising |= ADVERTISED_Autoneg;
cmd->lp_advertising |= ADVERTISED_Autoneg;
cmd->base.autoneg = ADVERTISED_Autoneg;
supported |= SUPPORTED_Autoneg;
advertising |= ADVERTISED_Autoneg;
lp_advertising |= ADVERTISED_Autoneg;
if (adv.duplex) {
cmd->supported |= (SUPPORTED_1000baseT_Full |
SUPPORTED_100baseT_Full |
SUPPORTED_10baseT_Full);
cmd->advertising |= (ADVERTISED_1000baseT_Full |
ADVERTISED_100baseT_Full |
ADVERTISED_10baseT_Full);
supported |= (SUPPORTED_1000baseT_Full |
SUPPORTED_100baseT_Full |
SUPPORTED_10baseT_Full);
advertising |= (ADVERTISED_1000baseT_Full |
ADVERTISED_100baseT_Full |
ADVERTISED_10baseT_Full);
} else {
cmd->supported |= (SUPPORTED_1000baseT_Half |
SUPPORTED_100baseT_Half |
SUPPORTED_10baseT_Half);
cmd->advertising |= (ADVERTISED_1000baseT_Half |
ADVERTISED_100baseT_Half |
ADVERTISED_10baseT_Half);
supported |= (SUPPORTED_1000baseT_Half |
SUPPORTED_100baseT_Half |
SUPPORTED_10baseT_Half);
advertising |= (ADVERTISED_1000baseT_Half |
ADVERTISED_100baseT_Half |
ADVERTISED_10baseT_Half);
}
if (adv.lp_duplex)
cmd->lp_advertising |= (ADVERTISED_1000baseT_Full |
ADVERTISED_100baseT_Full |
ADVERTISED_10baseT_Full);
lp_advertising |= (ADVERTISED_1000baseT_Full |
ADVERTISED_100baseT_Full |
ADVERTISED_10baseT_Full);
else
cmd->lp_advertising |= (ADVERTISED_1000baseT_Half |
ADVERTISED_100baseT_Half |
ADVERTISED_10baseT_Half);
cmd->port = PORT_OTHER;
lp_advertising |= (ADVERTISED_1000baseT_Half |
ADVERTISED_100baseT_Half |
ADVERTISED_10baseT_Half);
cmd->base.port = PORT_OTHER;
ethtool_convert_legacy_u32_to_link_mode(
cmd->link_modes.supported, supported);
ethtool_convert_legacy_u32_to_link_mode(
cmd->link_modes.advertising, advertising);
ethtool_convert_legacy_u32_to_link_mode(
cmd->link_modes.lp_advertising, lp_advertising);
return 0;
}
......@@ -350,13 +365,13 @@ static int stmmac_ethtool_getsettings(struct net_device *dev,
"link speed / duplex setting\n", dev->name);
return -EBUSY;
}
cmd->transceiver = XCVR_INTERNAL;
rc = phy_ethtool_gset(phy, cmd);
rc = phy_ethtool_ksettings_get(phy, cmd);
return rc;
}
static int stmmac_ethtool_setsettings(struct net_device *dev,
struct ethtool_cmd *cmd)
static int
stmmac_ethtool_set_link_ksettings(struct net_device *dev,
const struct ethtool_link_ksettings *cmd)
{
struct stmmac_priv *priv = netdev_priv(dev);
struct phy_device *phy = dev->phydev;
......@@ -367,7 +382,7 @@ static int stmmac_ethtool_setsettings(struct net_device *dev,
u32 mask = ADVERTISED_Autoneg | ADVERTISED_Pause;
/* Only support ANE */
if (cmd->autoneg != AUTONEG_ENABLE)
if (cmd->base.autoneg != AUTONEG_ENABLE)
return -EINVAL;
mask &= (ADVERTISED_1000baseT_Half |
......@@ -389,7 +404,7 @@ static int stmmac_ethtool_setsettings(struct net_device *dev,
}
spin_lock(&priv->lock);
rc = phy_ethtool_sset(phy, cmd);
rc = phy_ethtool_ksettings_set(phy, cmd);
spin_unlock(&priv->lock);
return rc;
......@@ -850,8 +865,6 @@ static int stmmac_set_tunable(struct net_device *dev,
static const struct ethtool_ops stmmac_ethtool_ops = {
.begin = stmmac_check_if_running,
.get_drvinfo = stmmac_ethtool_getdrvinfo,
.get_settings = stmmac_ethtool_getsettings,
.set_settings = stmmac_ethtool_setsettings,
.get_msglevel = stmmac_ethtool_getmsglevel,
.set_msglevel = stmmac_ethtool_setmsglevel,
.get_regs = stmmac_ethtool_gregs,
......@@ -871,6 +884,8 @@ static const struct ethtool_ops stmmac_ethtool_ops = {
.set_coalesce = stmmac_set_coalesce,
.get_tunable = stmmac_get_tunable,
.set_tunable = stmmac_set_tunable,
.get_link_ksettings = stmmac_ethtool_get_link_ksettings,
.set_link_ksettings = stmmac_ethtool_set_link_ksettings,
};
void stmmac_set_ethtool_ops(struct net_device *netdev)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册