提交 15ac7afe 编写于 作者: T Tony Lindgren

omap: mux: Add new style pin multiplexing code for omap3

Initially only for 34xx. This code allows us to:

- Make the code more generic as the omap internal signal
  names can stay the same across omap generations for some
  devices

- Map mux registers to GPIO registers that is needed for
  dynamic muxing of pins during off-idle

- Override bootloader mux values via kernel cmdline using
  omap_mux=some.signa1=0x1234,some.signal2=0x1234

- View and set the mux registers via debugfs if
  CONFIG_DEBUG_FS is enabled

Cc: Mike Rapoport <mike@compulab.co.il>
Cc: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
上级 92c9f501
......@@ -1787,6 +1787,11 @@ and is between 256 and 4096 characters. It is defined in the file
waiting for the ACK, so if this is set too high
interrupts *may* be lost!
omap_mux= [OMAP] Override bootloader pin multiplexing.
Format: <mux_mode0.mode_name=value>...
For example, to override I2C bus2:
omap_mux=i2c2_scl.i2c2_scl=0x100,i2c2_sda.i2c2_sda=0x100
opl3= [HW,OSS]
Format: <io>
......
......@@ -27,18 +27,23 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/spinlock.h>
#include <linux/list.h>
#include <asm/system.h>
#include <plat/control.h>
#include <plat/mux.h>
#ifdef CONFIG_OMAP_MUX
#include "mux.h"
#define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */
#define OMAP_MUX_BASE_SZ 0x5ca
static struct omap_mux_cfg arch_mux_cfg;
struct omap_mux_entry {
struct omap_mux mux;
struct list_head node;
};
static void __iomem *mux_base;
static inline u16 omap_mux_read(u16 reg)
......@@ -57,6 +62,10 @@ static inline void omap_mux_write(u16 val, u16 reg)
__raw_writew(val, mux_base + reg);
}
#ifdef CONFIG_OMAP_MUX
static struct omap_mux_cfg arch_mux_cfg;
/* NOTE: See mux.h for the enumeration */
#ifdef CONFIG_ARCH_OMAP24XX
......@@ -667,8 +676,8 @@ int __init omap2_mux_init(void)
mux_pbase = OMAP2420_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
else if (cpu_is_omap2430())
mux_pbase = OMAP243X_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
else if (cpu_is_omap34xx())
mux_pbase = OMAP343X_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
else
return -ENODEV;
mux_base = ioremap(mux_pbase, OMAP_MUX_BASE_SZ);
if (!mux_base) {
......@@ -689,4 +698,431 @@ int __init omap2_mux_init(void)
return omap_mux_register(&arch_mux_cfg);
}
#endif /* CONFIG_OMAP_MUX */
/*----------------------------------------------------------------------------*/
#ifdef CONFIG_ARCH_OMAP34XX
static LIST_HEAD(muxmodes);
static DEFINE_MUTEX(muxmode_mutex);
#ifdef CONFIG_OMAP_MUX
static char *omap_mux_options;
int __init omap_mux_init_gpio(int gpio, int val)
{
struct omap_mux_entry *e;
int found = 0;
if (!gpio)
return -EINVAL;
list_for_each_entry(e, &muxmodes, node) {
struct omap_mux *m = &e->mux;
if (gpio == m->gpio) {
u16 old_mode;
u16 mux_mode;
old_mode = omap_mux_read(m->reg_offset);
mux_mode = val & ~(OMAP_MUX_NR_MODES - 1);
mux_mode |= OMAP_MUX_MODE4;
printk(KERN_DEBUG "mux: Setting signal "
"%s.gpio%i 0x%04x -> 0x%04x\n",
m->muxnames[0], gpio, old_mode, mux_mode);
omap_mux_write(mux_mode, m->reg_offset);
found++;
}
}
if (found == 1)
return 0;
if (found > 1) {
printk(KERN_ERR "mux: Multiple gpio paths for gpio%i\n", gpio);
return -EINVAL;
}
printk(KERN_ERR "mux: Could not set gpio%i\n", gpio);
return -ENODEV;
}
int __init omap_mux_init_signal(char *muxname, int val)
{
struct omap_mux_entry *e;
char *m0_name = NULL, *mode_name = NULL;
int found = 0;
mode_name = strchr(muxname, '.');
if (mode_name) {
*mode_name = '\0';
mode_name++;
m0_name = muxname;
} else {
mode_name = muxname;
}
list_for_each_entry(e, &muxmodes, node) {
struct omap_mux *m = &e->mux;
char *m0_entry = m->muxnames[0];
int i;
if (m0_name && strcmp(m0_name, m0_entry))
continue;
for (i = 0; i < OMAP_MUX_NR_MODES; i++) {
char *mode_cur = m->muxnames[i];
if (!mode_cur)
continue;
if (!strcmp(mode_name, mode_cur)) {
u16 old_mode;
u16 mux_mode;
old_mode = omap_mux_read(m->reg_offset);
mux_mode = val | i;
printk(KERN_DEBUG "mux: Setting signal "
"%s.%s 0x%04x -> 0x%04x\n",
m0_entry, muxname, old_mode, mux_mode);
omap_mux_write(mux_mode, m->reg_offset);
found++;
}
}
}
if (found == 1)
return 0;
if (found > 1) {
printk(KERN_ERR "mux: Multiple signal paths (%i) for %s\n",
found, muxname);
return -EINVAL;
}
printk(KERN_ERR "mux: Could not set signal %s\n", muxname);
return -ENODEV;
}
static void __init omap_mux_free_names(struct omap_mux *m)
{
int i;
for (i = 0; i < OMAP_MUX_NR_MODES; i++)
kfree(m->muxnames[i]);
#ifdef CONFIG_DEBUG_FS
for (i = 0; i < OMAP_MUX_NR_SIDES; i++)
kfree(m->balls[i]);
#endif
}
/* Free all data except for GPIO pins unless CONFIG_DEBUG_FS is set */
static int __init omap_mux_late_init(void)
{
struct omap_mux_entry *e, *tmp;
list_for_each_entry_safe(e, tmp, &muxmodes, node) {
struct omap_mux *m = &e->mux;
u16 mode = omap_mux_read(m->reg_offset);
if (OMAP_MODE_GPIO(mode))
continue;
#ifndef CONFIG_DEBUG_FS
mutex_lock(&muxmode_mutex);
list_del(&e->node);
mutex_unlock(&muxmode_mutex);
omap_mux_free_names(m);
kfree(m);
#endif
}
return 0;
}
late_initcall(omap_mux_late_init);
static void __init omap_mux_package_fixup(struct omap_mux *p,
struct omap_mux *superset)
{
while (p->reg_offset != OMAP_MUX_TERMINATOR) {
struct omap_mux *s = superset;
int found = 0;
while (s->reg_offset != OMAP_MUX_TERMINATOR) {
if (s->reg_offset == p->reg_offset) {
*s = *p;
found++;
break;
}
s++;
}
if (!found)
printk(KERN_ERR "mux: Unknown entry offset 0x%x\n",
p->reg_offset);
p++;
}
}
#ifdef CONFIG_DEBUG_FS
static void __init omap_mux_package_init_balls(struct omap_ball *b,
struct omap_mux *superset)
{
while (b->reg_offset != OMAP_MUX_TERMINATOR) {
struct omap_mux *s = superset;
int found = 0;
while (s->reg_offset != OMAP_MUX_TERMINATOR) {
if (s->reg_offset == b->reg_offset) {
s->balls[0] = b->balls[0];
s->balls[1] = b->balls[1];
found++;
break;
}
s++;
}
if (!found)
printk(KERN_ERR "mux: Unknown ball offset 0x%x\n",
b->reg_offset);
b++;
}
}
#else /* CONFIG_DEBUG_FS */
static inline void omap_mux_package_init_balls(struct omap_ball *b,
struct omap_mux *superset)
{
}
#endif /* CONFIG_DEBUG_FS */
static int __init omap_mux_setup(char *options)
{
if (!options)
return 0;
omap_mux_options = options;
return 1;
}
__setup("omap_mux=", omap_mux_setup);
/*
* Note that the omap_mux=some.signal1=0x1234,some.signal2=0x1234
* cmdline options only override the bootloader values.
* During development, please enable CONFIG_DEBUG_FS, and use the
* signal specific entries under debugfs.
*/
static void __init omap_mux_set_cmdline_signals(void)
{
char *options, *next_opt, *token;
if (!omap_mux_options)
return;
options = kmalloc(strlen(omap_mux_options) + 1, GFP_KERNEL);
if (!options)
return;
strcpy(options, omap_mux_options);
next_opt = options;
while ((token = strsep(&next_opt, ",")) != NULL) {
char *keyval, *name;
unsigned long val;
keyval = token;
name = strsep(&keyval, "=");
if (name) {
int res;
res = strict_strtoul(keyval, 0x10, &val);
if (res < 0)
continue;
omap_mux_init_signal(name, (u16)val);
}
}
kfree(options);
}
static void __init omap_mux_set_board_signals(struct omap_board_mux *board_mux)
{
while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) {
omap_mux_write(board_mux->value, board_mux->reg_offset);
board_mux++;
}
}
static int __init omap_mux_copy_names(struct omap_mux *src,
struct omap_mux *dst)
{
int i;
for (i = 0; i < OMAP_MUX_NR_MODES; i++) {
if (src->muxnames[i]) {
dst->muxnames[i] =
kmalloc(strlen(src->muxnames[i]) + 1,
GFP_KERNEL);
if (!dst->muxnames[i])
goto free;
strcpy(dst->muxnames[i], src->muxnames[i]);
}
}
#ifdef CONFIG_DEBUG_FS
for (i = 0; i < OMAP_MUX_NR_SIDES; i++) {
if (src->balls[i]) {
dst->balls[i] =
kmalloc(strlen(src->balls[i]) + 1,
GFP_KERNEL);
if (!dst->balls[i])
goto free;
strcpy(dst->balls[i], src->balls[i]);
}
}
#endif
return 0;
free:
omap_mux_free_names(dst);
return -ENOMEM;
}
#endif /* CONFIG_OMAP_MUX */
static u16 omap_mux_get_by_gpio(int gpio)
{
struct omap_mux_entry *e;
u16 offset = OMAP_MUX_TERMINATOR;
list_for_each_entry(e, &muxmodes, node) {
struct omap_mux *m = &e->mux;
if (m->gpio == gpio) {
offset = m->reg_offset;
break;
}
}
return offset;
}
/* Needed for dynamic muxing of GPIO pins for off-idle */
u16 omap_mux_get_gpio(int gpio)
{
u16 offset;
offset = omap_mux_get_by_gpio(gpio);
if (offset == OMAP_MUX_TERMINATOR) {
printk(KERN_ERR "mux: Could not get gpio%i\n", gpio);
return offset;
}
return omap_mux_read(offset);
}
/* Needed for dynamic muxing of GPIO pins for off-idle */
void omap_mux_set_gpio(u16 val, int gpio)
{
u16 offset;
offset = omap_mux_get_by_gpio(gpio);
if (offset == OMAP_MUX_TERMINATOR) {
printk(KERN_ERR "mux: Could not set gpio%i\n", gpio);
return;
}
omap_mux_write(val, offset);
}
static struct omap_mux * __init omap_mux_list_add(struct omap_mux *src)
{
struct omap_mux_entry *entry;
struct omap_mux *m;
entry = kzalloc(sizeof(struct omap_mux_entry), GFP_KERNEL);
if (!entry)
return NULL;
m = &entry->mux;
memcpy(m, src, sizeof(struct omap_mux_entry));
#ifdef CONFIG_OMAP_MUX
if (omap_mux_copy_names(src, m)) {
kfree(entry);
return NULL;
}
#endif
mutex_lock(&muxmode_mutex);
list_add_tail(&entry->node, &muxmodes);
mutex_unlock(&muxmode_mutex);
return m;
}
/*
* Note if CONFIG_OMAP_MUX is not selected, we will only initialize
* the GPIO to mux offset mapping that is needed for dynamic muxing
* of GPIO pins for off-idle.
*/
static void __init omap_mux_init_list(struct omap_mux *superset)
{
while (superset->reg_offset != OMAP_MUX_TERMINATOR) {
struct omap_mux *entry;
#ifndef CONFIG_OMAP_MUX
/* Skip pins that are not muxed as GPIO by bootloader */
if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) {
superset++;
continue;
}
#endif
entry = omap_mux_list_add(superset);
if (!entry) {
printk(KERN_ERR "mux: Could not add entry\n");
return;
}
superset++;
}
}
int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
struct omap_mux *superset,
struct omap_mux *package_subset,
struct omap_board_mux *board_mux,
struct omap_ball *package_balls)
{
if (mux_base)
return -EBUSY;
mux_base = ioremap(mux_pbase, mux_size);
if (!mux_base) {
printk(KERN_ERR "mux: Could not ioremap\n");
return -ENODEV;
}
#ifdef CONFIG_OMAP_MUX
omap_mux_package_fixup(package_subset, superset);
omap_mux_package_init_balls(package_balls, superset);
omap_mux_set_cmdline_signals();
omap_mux_set_board_signals(board_mux);
#endif
omap_mux_init_list(superset);
return 0;
}
#endif /* CONFIG_ARCH_OMAP34XX */
/*
* Copyright (C) 2009 Nokia
* Copyright (C) 2009 Texas Instruments
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#define OMAP_MUX_TERMINATOR 0xffff
/* 34xx mux mode options for each pin. See TRM for options */
#define OMAP_MUX_MODE0 0
#define OMAP_MUX_MODE1 1
#define OMAP_MUX_MODE2 2
#define OMAP_MUX_MODE3 3
#define OMAP_MUX_MODE4 4
#define OMAP_MUX_MODE5 5
#define OMAP_MUX_MODE6 6
#define OMAP_MUX_MODE7 7
/* 24xx/34xx mux bit defines */
#define OMAP_PULL_ENA (1 << 3)
#define OMAP_PULL_UP (1 << 4)
#define OMAP_ALTELECTRICALSEL (1 << 5)
/* 34xx specific mux bit defines */
#define OMAP_INPUT_EN (1 << 8)
#define OMAP_OFF_EN (1 << 9)
#define OMAP_OFFOUT_EN (1 << 10)
#define OMAP_OFFOUT_VAL (1 << 11)
#define OMAP_OFF_PULL_EN (1 << 12)
#define OMAP_OFF_PULL_UP (1 << 13)
#define OMAP_WAKEUP_EN (1 << 14)
/* Active pin states */
#define OMAP_PIN_OUTPUT 0
#define OMAP_PIN_INPUT OMAP_INPUT_EN
#define OMAP_PIN_INPUT_PULLUP (OMAP_PULL_ENA | OMAP_INPUT_EN \
| OMAP_PULL_UP)
#define OMAP_PIN_INPUT_PULLDOWN (OMAP_PULL_ENA | OMAP_INPUT_EN)
/* Off mode states */
#define OMAP_PIN_OFF_NONE 0
#define OMAP_PIN_OFF_OUTPUT_HIGH (OMAP_OFF_EN | OMAP_OFFOUT_EN \
| OMAP_OFFOUT_VAL)
#define OMAP_PIN_OFF_OUTPUT_LOW (OMAP_OFF_EN | OMAP_OFFOUT_EN)
#define OMAP_PIN_OFF_INPUT_PULLUP (OMAP_OFF_EN | OMAP_OFF_PULL_EN \
| OMAP_OFF_PULL_UP)
#define OMAP_PIN_OFF_INPUT_PULLDOWN (OMAP_OFF_EN | OMAP_OFF_PULL_EN)
#define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN
#define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4)
/* Flags for omap_mux_init */
#define OMAP_PACKAGE_MASK 0xffff
#define OMAP_PACKAGE_CUS 3 /* 423-pin 0.65 */
#define OMAP_PACKAGE_CBB 2 /* 515-pin 0.40 0.50 */
#define OMAP_PACKAGE_CBC 1 /* 515-pin 0.50 0.65 */
#define OMAP_MUX_NR_MODES 8 /* Available modes */
#define OMAP_MUX_NR_SIDES 2 /* Bottom & top */
/**
* struct omap_mux - data for omap mux register offset and it's value
* @reg_offset: mux register offset from the mux base
* @gpio: GPIO number
* @muxnames: available signal modes for a ball
*/
struct omap_mux {
u16 reg_offset;
u16 gpio;
#ifdef CONFIG_OMAP_MUX
char *muxnames[OMAP_MUX_NR_MODES];
#ifdef CONFIG_DEBUG_FS
char *balls[OMAP_MUX_NR_SIDES];
#endif
#endif
};
/**
* struct omap_ball - data for balls on omap package
* @reg_offset: mux register offset from the mux base
* @balls: available balls on the package
*/
struct omap_ball {
u16 reg_offset;
char *balls[OMAP_MUX_NR_SIDES];
};
/**
* struct omap_board_mux - data for initializing mux registers
* @reg_offset: mux register offset from the mux base
* @mux_value: desired mux value to set
*/
struct omap_board_mux {
u16 reg_offset;
u16 value;
};
#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_ARCH_OMAP34XX)
/**
* omap_mux_init_gpio - initialize a signal based on the GPIO number
* @gpio: GPIO number
* @val: Options for the mux register value
*/
int omap_mux_init_gpio(int gpio, int val);
/**
* omap_mux_init_signal - initialize a signal based on the signal name
* @muxname: Mux name in mode0_name.signal_name format
* @val: Options for the mux register value
*/
int omap_mux_init_signal(char *muxname, int val);
#else
static inline int omap_mux_init_gpio(int gpio, int val)
{
return 0;
}
static inline int omap_mux_init_signal(char *muxname, int val)
{
return 0;
}
#endif
/**
* omap_mux_get_gpio() - get mux register value based on GPIO number
* @gpio: GPIO number
*
*/
u16 omap_mux_get_gpio(int gpio);
/**
* omap_mux_set_gpio() - set mux register value based on GPIO number
* @val: New mux register value
* @gpio: GPIO number
*
*/
void omap_mux_set_gpio(u16 val, int gpio);
/**
* omap3_mux_init() - initialize mux system with board specific set
* @board_mux: Board specific mux table
* @flags: OMAP package type used for the board
*/
int omap3_mux_init(struct omap_board_mux *board_mux, int flags);
/**
* omap_mux_init - private mux init function, do not call
*/
int omap_mux_init(u32 mux_pbase, u32 mux_size,
struct omap_mux *superset,
struct omap_mux *package_subset,
struct omap_board_mux *board_mux,
struct omap_ball *package_balls);
......@@ -54,8 +54,12 @@ int __init_or_module omap_cfg_reg(const unsigned long index)
{
struct pin_config *reg;
if (cpu_is_omap44xx())
return 0;
if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n",
index);
WARN_ON(1);
return -EINVAL;
}
if (mux_cfg == NULL) {
printk(KERN_ERR "Pin mux table not initialized\n");
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册