Merge branch 'broadcom-phy-cleanup'

Rafał Miłecki says:

====================
net-next: Broadcom PHY driver cleanup

I will probably need to use broadcom.ko for PHY connected to interface
of bgmac supported device so I started looking at it willing to
understand it better.

I found AUXCTL part of the driver / lib a bit confusing and hard to read
so I'm trying to clean it up a bit. I hope this patchset makes following
AUXCTL operations much easier making it clear which defines are for
registers and which for values.

There is no functional change in this pachset.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/phy/broadcom.c

@@ -395,12 +395,10 @@ static int bcm54612e_config_aneg(struct phy_device *phydev)
 	    (phydev->interface != PHY_INTERFACE_MODE_RGMII_RXID)) {
 		u16 reg;
 
-		/* Errata: reads require filling in the write selector field */
-		bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
-				     MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC);
-		reg = phy_read(phydev, MII_BCM54XX_AUX_CTL);
+		reg = bcm54xx_auxctl_read(phydev,
+					  MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
 		/* Disable RXD to RXC delay (default set) */
-		reg &= ~MII_BCM54XX_AUXCTL_MISC_RXD_RXC_SKEW;
+		reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN;
 		/* Clear shadow selector field */
 		reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MASK;
 		bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,

include/linux/brcmphy.h

@@ -104,19 +104,17 @@
 /*
  * AUXILIARY CONTROL SHADOW ACCESS REGISTERS.  (PHY REG 0x18)
  */
-#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL	0x0000
+#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL	0x00
 #define MII_BCM54XX_AUXCTL_ACTL_TX_6DB		0x0400
 #define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA	0x0800
 
-#define MII_BCM54XX_AUXCTL_MISC_WREN	0x8000
-#define MII_BCM54XX_AUXCTL_MISC_RXD_RXC_SKEW	0x0100
-#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX	0x0200
-#define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC	0x7000
-#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC	0x0007
-#define MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT	12
-#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN	(1 << 8)
-#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN	(1 << 4)
+#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC			0x07
+#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN	0x0010
+#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN	0x0100
+#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX		0x0200
+#define MII_BCM54XX_AUXCTL_MISC_WREN			0x8000
 
+#define MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT	12
 #define MII_BCM54XX_AUXCTL_SHDWSEL_MASK	0x0007
 
 /*