提交 153e080d 编写于 作者: V Vasanthakumar Thiagarajan 提交者: John W. Linville

ath9k: Move PS wakeup/restore calls from isr to tasklet

We do not need to do this in ath_isr() and it looks like the modified
version ends up being more stable as far as being able receive beacon
frames is concerned. Furthermore, this reduces need to move between
AWAKE and NETWORK SLEEP states when processing some unrelated
interrupts.
Signed-off-by: NVasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: NJouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 e3da574a
......@@ -455,8 +455,11 @@ static void ath9k_tasklet(unsigned long data)
struct ath_softc *sc = (struct ath_softc *)data;
u32 status = sc->intrstatus;
ath9k_ps_wakeup(sc);
if (status & ATH9K_INT_FATAL) {
ath_reset(sc, false);
ath9k_ps_restore(sc);
return;
}
......@@ -471,6 +474,7 @@ static void ath9k_tasklet(unsigned long data)
/* re-enable hardware interrupt */
ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
ath9k_ps_restore(sc);
}
irqreturn_t ath_isr(int irq, void *dev)
......@@ -498,14 +502,11 @@ irqreturn_t ath_isr(int irq, void *dev)
if (sc->sc_flags & SC_OP_INVALID)
return IRQ_NONE;
ath9k_ps_wakeup(sc);
/* shared irq, not for us */
if (!ath9k_hw_intrpend(ah)) {
ath9k_ps_restore(sc);
if (!ath9k_hw_intrpend(ah))
return IRQ_NONE;
}
/*
* Figure out the reason(s) for the interrupt. Note
......@@ -520,10 +521,8 @@ irqreturn_t ath_isr(int irq, void *dev)
* If there are no status bits set, then this interrupt was not
* for me (should have been caught above).
*/
if (!status) {
ath9k_ps_restore(sc);
if (!status)
return IRQ_NONE;
}
/* Cache the status */
sc->intrstatus = status;
......@@ -560,20 +559,17 @@ irqreturn_t ath_isr(int irq, void *dev)
ath9k_hw_set_interrupts(ah, sc->imask);
}
if (status & ATH9K_INT_TIM_TIMER) {
if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) {
if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
if (status & ATH9K_INT_TIM_TIMER) {
/* Clear RxAbort bit so that we can
* receive frames */
ath9k_hw_setpower(ah, ATH9K_PM_AWAKE);
ath9k_hw_setrxabort(ah, 0);
sched = true;
ath9k_hw_setrxabort(sc->sc_ah, 0);
sc->sc_flags |= SC_OP_WAIT_FOR_BEACON;
}
}
chip_reset:
ath9k_ps_restore(sc);
ath_debug_stat_interrupt(sc, status);
if (sched) {
......
......@@ -508,8 +508,6 @@ static bool ath_beacon_dtim_pending_cab(struct sk_buff *skb)
static void ath_rx_ps_back_to_sleep(struct ath_softc *sc)
{
sc->sc_flags &= ~(SC_OP_WAIT_FOR_BEACON | SC_OP_WAIT_FOR_CAB);
if (sc->hw->conf.flags & IEEE80211_CONF_PS)
ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP);
}
static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册