提交 14ef6ad2 编写于 作者: G Guenter Roeck 提交者: David S. Miller

net: dsa: mv88e6123_61_65: Determine and use number of switch ports

Determine and use number of switch ports from chip ID instead of always
using the maximum, and return error when an attempt is made to access a
non-existing port.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 d198893e
......@@ -27,25 +27,25 @@ static char *mv88e6123_61_65_probe(struct device *host_dev, int sw_addr)
ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), 0x03);
if (ret >= 0) {
if (ret == 0x1212)
if (ret == ID_6123_A1)
return "Marvell 88E6123 (A1)";
if (ret == 0x1213)
if (ret == ID_6123_A2)
return "Marvell 88E6123 (A2)";
if ((ret & 0xfff0) == 0x1210)
if ((ret & 0xfff0) == ID_6123)
return "Marvell 88E6123";
if (ret == 0x1612)
if (ret == ID_6161_A1)
return "Marvell 88E6161 (A1)";
if (ret == 0x1613)
if (ret == ID_6161_A2)
return "Marvell 88E6161 (A2)";
if ((ret & 0xfff0) == 0x1610)
if ((ret & 0xfff0) == ID_6161)
return "Marvell 88E6161";
if (ret == 0x1652)
if (ret == ID_6165_A1)
return "Marvell 88E6165 (A1)";
if (ret == 0x1653)
if (ret == ID_6165_A2)
return "Marvell 88e6165 (A2)";
if ((ret & 0xfff0) == 0x1650)
if ((ret & 0xfff0) == ID_6165)
return "Marvell 88E6165";
}
......@@ -54,12 +54,13 @@ static char *mv88e6123_61_65_probe(struct device *host_dev, int sw_addr)
static int mv88e6123_61_65_switch_reset(struct dsa_switch *ds)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
int i;
int ret;
unsigned long timeout;
/* Set all ports to the disabled state. */
for (i = 0; i < 8; i++) {
for (i = 0; i < ps->num_ports; i++) {
ret = REG_READ(REG_PORT(i), 0x04);
REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
}
......@@ -271,6 +272,7 @@ static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p)
static int mv88e6123_61_65_setup(struct dsa_switch *ds)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
int i;
int ret;
......@@ -278,6 +280,18 @@ static int mv88e6123_61_65_setup(struct dsa_switch *ds)
if (ret < 0)
return ret;
switch (ps->id) {
case ID_6123:
ps->num_ports = 3;
break;
case ID_6161:
case ID_6165:
ps->num_ports = 6;
break;
default:
return -ENODEV;
}
ret = mv88e6123_61_65_switch_reset(ds);
if (ret < 0)
return ret;
......@@ -288,7 +302,7 @@ static int mv88e6123_61_65_setup(struct dsa_switch *ds)
if (ret < 0)
return ret;
for (i = 0; i < 6; i++) {
for (i = 0; i < ps->num_ports; i++) {
ret = mv88e6123_61_65_setup_port(ds, i);
if (ret < 0)
return ret;
......@@ -297,20 +311,25 @@ static int mv88e6123_61_65_setup(struct dsa_switch *ds)
return 0;
}
static int mv88e6123_61_65_port_to_phy_addr(int port)
static int mv88e6123_61_65_port_to_phy_addr(struct dsa_switch *ds, int port)
{
if (port >= 0 && port <= 4)
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
if (port >= 0 && port < ps->num_ports)
return port;
return -1;
return -EINVAL;
}
static int
mv88e6123_61_65_phy_read(struct dsa_switch *ds, int port, int regnum)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
int addr = mv88e6123_61_65_port_to_phy_addr(port);
int addr = mv88e6123_61_65_port_to_phy_addr(ds, port);
int ret;
if (addr < 0)
return addr;
mutex_lock(&ps->phy_mutex);
ret = mv88e6xxx_phy_read(ds, addr, regnum);
mutex_unlock(&ps->phy_mutex);
......@@ -322,9 +341,12 @@ mv88e6123_61_65_phy_write(struct dsa_switch *ds,
int port, int regnum, u16 val)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
int addr = mv88e6123_61_65_port_to_phy_addr(port);
int addr = mv88e6123_61_65_port_to_phy_addr(ds, port);
int ret;
if (addr < 0)
return addr;
mutex_lock(&ps->phy_mutex);
ret = mv88e6xxx_phy_write(ds, addr, regnum, val);
mutex_unlock(&ps->phy_mutex);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册