提交 14ab9b86 编写于 作者: P Peter Hagervall 提交者: David S. Miller

[BNX2]: Possible sparse fixes, take two

This patch contains the following possible cleanups/fixes:

- use C99 struct initializers
- make a few arrays and structs static
- remove a few uses of literal 0 as NULL pointer
- use convenience function instead of cast+dereference in bnx2_ioctl()
- remove superfluous casts to u8 * in calls to readl/writel
Signed-off-by: NPeter Hagervall <hager@cs.umu.se>
Acked-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 07dc3f07
......@@ -52,7 +52,6 @@ static struct {
{ "HP NC370i Multifunction Gigabit Server Adapter" },
{ "Broadcom NetXtreme II BCM5706 1000Base-SX" },
{ "HP NC370F Multifunction Gigabit Server Adapter" },
{ 0 },
};
static struct pci_device_id bnx2_pci_tbl[] = {
......@@ -3507,11 +3506,11 @@ bnx2_test_registers(struct bnx2 *bp)
rw_mask = reg_tbl[i].rw_mask;
ro_mask = reg_tbl[i].ro_mask;
save_val = readl((u8 *) bp->regview + offset);
save_val = readl(bp->regview + offset);
writel(0, (u8 *) bp->regview + offset);
writel(0, bp->regview + offset);
val = readl((u8 *) bp->regview + offset);
val = readl(bp->regview + offset);
if ((val & rw_mask) != 0) {
goto reg_test_err;
}
......@@ -3520,9 +3519,9 @@ bnx2_test_registers(struct bnx2 *bp)
goto reg_test_err;
}
writel(0xffffffff, (u8 *) bp->regview + offset);
writel(0xffffffff, bp->regview + offset);
val = readl((u8 *) bp->regview + offset);
val = readl(bp->regview + offset);
if ((val & rw_mask) != rw_mask) {
goto reg_test_err;
}
......@@ -3531,11 +3530,11 @@ bnx2_test_registers(struct bnx2 *bp)
goto reg_test_err;
}
writel(save_val, (u8 *) bp->regview + offset);
writel(save_val, bp->regview + offset);
continue;
reg_test_err:
writel(save_val, (u8 *) bp->regview + offset);
writel(save_val, bp->regview + offset);
ret = -ENODEV;
break;
}
......@@ -4698,7 +4697,7 @@ bnx2_set_rx_csum(struct net_device *dev, u32 data)
#define BNX2_NUM_STATS 45
struct {
static struct {
char string[ETH_GSTRING_LEN];
} bnx2_stats_str_arr[BNX2_NUM_STATS] = {
{ "rx_bytes" },
......@@ -4750,7 +4749,7 @@ struct {
#define STATS_OFFSET32(offset_name) (offsetof(struct statistics_block, offset_name) / 4)
unsigned long bnx2_stats_offset_arr[BNX2_NUM_STATS] = {
static unsigned long bnx2_stats_offset_arr[BNX2_NUM_STATS] = {
STATS_OFFSET32(stat_IfHCInOctets_hi),
STATS_OFFSET32(stat_IfHCInBadOctets_hi),
STATS_OFFSET32(stat_IfHCOutOctets_hi),
......@@ -4801,7 +4800,7 @@ unsigned long bnx2_stats_offset_arr[BNX2_NUM_STATS] = {
/* stat_IfHCInBadOctets and stat_Dot3StatsCarrierSenseErrors are
* skipped because of errata.
*/
u8 bnx2_5706_stats_len_arr[BNX2_NUM_STATS] = {
static u8 bnx2_5706_stats_len_arr[BNX2_NUM_STATS] = {
8,0,8,8,8,8,8,8,8,8,
4,0,4,4,4,4,4,4,4,4,
4,4,4,4,4,4,4,4,4,4,
......@@ -4811,7 +4810,7 @@ u8 bnx2_5706_stats_len_arr[BNX2_NUM_STATS] = {
#define BNX2_NUM_TESTS 6
struct {
static struct {
char string[ETH_GSTRING_LEN];
} bnx2_tests_str_arr[BNX2_NUM_TESTS] = {
{ "register_test (offline)" },
......@@ -4910,7 +4909,7 @@ bnx2_get_ethtool_stats(struct net_device *dev,
struct bnx2 *bp = dev->priv;
int i;
u32 *hw_stats = (u32 *) bp->stats_blk;
u8 *stats_len_arr = 0;
u8 *stats_len_arr = NULL;
if (hw_stats == NULL) {
memset(buf, 0, sizeof(u64) * BNX2_NUM_STATS);
......@@ -5012,7 +5011,7 @@ static struct ethtool_ops bnx2_ethtool_ops = {
static int
bnx2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
struct mii_ioctl_data *data = (struct mii_ioctl_data *)&ifr->ifr_data;
struct mii_ioctl_data *data = if_mii(ifr);
struct bnx2 *bp = dev->priv;
int err;
......@@ -5505,12 +5504,12 @@ bnx2_resume(struct pci_dev *pdev)
}
static struct pci_driver bnx2_pci_driver = {
name: DRV_MODULE_NAME,
id_table: bnx2_pci_tbl,
probe: bnx2_init_one,
remove: __devexit_p(bnx2_remove_one),
suspend: bnx2_suspend,
resume: bnx2_resume,
.name = DRV_MODULE_NAME,
.id_table = bnx2_pci_tbl,
.probe = bnx2_init_one,
.remove = __devexit_p(bnx2_remove_one),
.suspend = bnx2_suspend,
.resume = bnx2_resume,
};
static int __init bnx2_init(void)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册