提交 146c6a66 编写于 作者: N Nick Dyer 提交者: Dmitry Torokhov

Input: atmel_mxt_ts - remove unused defines

Many of these values are out of date and they aren't used in the driver
- all they do is increase the size of the kernel source.
Signed-off-by: NNick Dyer <nick.dyer@itdev.co.uk>
Acked-by: NBenson Leung <bleung@chromium.org>
Acked-by: NYufeng Shen <miletus@chromium.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
上级 7f3884f7
......@@ -29,27 +29,13 @@
#include <linux/slab.h>
#include <asm/unaligned.h>
/* Version */
#define MXT_VER_20 20
#define MXT_VER_21 21
#define MXT_VER_22 22
/* Firmware files */
#define MXT_FW_NAME "maxtouch.fw"
#define MXT_CFG_NAME "maxtouch.cfg"
#define MXT_CFG_MAGIC "OBP_RAW V1"
/* Registers */
#define MXT_INFO 0x00
#define MXT_FAMILY_ID 0x00
#define MXT_VARIANT_ID 0x01
#define MXT_VERSION 0x02
#define MXT_BUILD 0x03
#define MXT_MATRIX_X_SIZE 0x04
#define MXT_MATRIX_Y_SIZE 0x05
#define MXT_OBJECT_NUM 0x06
#define MXT_OBJECT_START 0x07
#define MXT_OBJECT_SIZE 6
#define MXT_INFO_CHECKSUM_SIZE 3
#define MXT_MAX_BLOCK_WRITE 256
......@@ -111,15 +97,6 @@ struct t7_config {
#define MXT_POWER_CFG_RUN 0
#define MXT_POWER_CFG_DEEPSLEEP 1
/* MXT_GEN_ACQUIRE_T8 field */
#define MXT_ACQUIRE_CHRGTIME 0
#define MXT_ACQUIRE_TCHDRIFT 2
#define MXT_ACQUIRE_DRIFTST 3
#define MXT_ACQUIRE_TCHAUTOCAL 4
#define MXT_ACQUIRE_SYNC 5
#define MXT_ACQUIRE_ATCHCALST 6
#define MXT_ACQUIRE_ATCHCALSTHR 7
/* MXT_TOUCH_MULTI_T9 field */
#define MXT_T9_CTRL 0
#define MXT_T9_ORIENT 9
......@@ -143,51 +120,10 @@ struct t9_range {
/* MXT_TOUCH_MULTI_T9 orient */
#define MXT_T9_ORIENT_SWITCH (1 << 0)
/* MXT_PROCI_GRIPFACE_T20 field */
#define MXT_GRIPFACE_CTRL 0
#define MXT_GRIPFACE_XLOGRIP 1
#define MXT_GRIPFACE_XHIGRIP 2
#define MXT_GRIPFACE_YLOGRIP 3
#define MXT_GRIPFACE_YHIGRIP 4
#define MXT_GRIPFACE_MAXTCHS 5
#define MXT_GRIPFACE_SZTHR1 7
#define MXT_GRIPFACE_SZTHR2 8
#define MXT_GRIPFACE_SHPTHR1 9
#define MXT_GRIPFACE_SHPTHR2 10
#define MXT_GRIPFACE_SUPEXTTO 11
/* MXT_PROCI_NOISE field */
#define MXT_NOISE_CTRL 0
#define MXT_NOISE_OUTFLEN 1
#define MXT_NOISE_GCAFUL_LSB 3
#define MXT_NOISE_GCAFUL_MSB 4
#define MXT_NOISE_GCAFLL_LSB 5
#define MXT_NOISE_GCAFLL_MSB 6
#define MXT_NOISE_ACTVGCAFVALID 7
#define MXT_NOISE_NOISETHR 8
#define MXT_NOISE_FREQHOPSCALE 10
#define MXT_NOISE_FREQ0 11
#define MXT_NOISE_FREQ1 12
#define MXT_NOISE_FREQ2 13
#define MXT_NOISE_FREQ3 14
#define MXT_NOISE_FREQ4 15
#define MXT_NOISE_IDLEGCAFVALID 16
/* MXT_SPT_COMMSCONFIG_T18 */
#define MXT_COMMS_CTRL 0
#define MXT_COMMS_CMD 1
/* MXT_SPT_CTECONFIG_T28 field */
#define MXT_CTE_CTRL 0
#define MXT_CTE_CMD 1
#define MXT_CTE_MODE 2
#define MXT_CTE_IDLEGCAFDEPTH 3
#define MXT_CTE_ACTVGCAFDEPTH 4
#define MXT_CTE_VOLTAGE 5
#define MXT_VOLTAGE_DEFAULT 2700000
#define MXT_VOLTAGE_STEP 10000
/* Define for MXT_GEN_COMMAND_T6 */
#define MXT_BOOT_VALUE 0xa5
#define MXT_RESET_VALUE 0x01
......@@ -1543,7 +1479,7 @@ static int mxt_get_info(struct mxt_data *data)
int error;
/* Read 7-byte info block starting at address 0 */
error = __mxt_read_reg(client, MXT_INFO, sizeof(*info), info);
error = __mxt_read_reg(client, 0, sizeof(*info), info);
if (error)
return error;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册