提交 14023641 编写于 作者: A Abhijeet Kolekar 提交者: Reinette Chatre

iwl3945: fix internal scan

Port of internal scan to iwl3945 missed introduction
of iwl3945_get_single_channel_for_scan.

Fix the following bug by introducing the iwl3945_get_single_channel_for_scan
http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2208Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
上级 a6866ac9
......@@ -1119,10 +1119,9 @@ static int iwl_get_single_channel_for_scan(struct iwl_priv *priv,
struct iwl_scan_channel *scan_ch)
{
const struct ieee80211_supported_band *sband;
const struct iwl_channel_info *ch_info;
u16 passive_dwell = 0;
u16 active_dwell = 0;
int i, added = 0;
int added = 0;
u16 channel = 0;
sband = iwl_get_hw_mode(priv, band);
......@@ -1137,32 +1136,7 @@ static int iwl_get_single_channel_for_scan(struct iwl_priv *priv,
if (passive_dwell <= active_dwell)
passive_dwell = active_dwell + 1;
/* only scan single channel, good enough to reset the RF */
/* pick the first valid not in-use channel */
if (band == IEEE80211_BAND_5GHZ) {
for (i = 14; i < priv->channel_count; i++) {
if (priv->channel_info[i].channel !=
le16_to_cpu(priv->staging_rxon.channel)) {
channel = priv->channel_info[i].channel;
ch_info = iwl_get_channel_info(priv,
band, channel);
if (is_channel_valid(ch_info))
break;
}
}
} else {
for (i = 0; i < 14; i++) {
if (priv->channel_info[i].channel !=
le16_to_cpu(priv->staging_rxon.channel)) {
channel =
priv->channel_info[i].channel;
ch_info = iwl_get_channel_info(priv,
band, channel);
if (is_channel_valid(ch_info))
break;
}
}
}
channel = iwl_get_single_channel_number(priv, band);
if (channel) {
scan_ch->channel = cpu_to_le16(channel);
scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
......
......@@ -854,6 +854,45 @@ void iwl_set_rxon_chain(struct iwl_priv *priv)
}
EXPORT_SYMBOL(iwl_set_rxon_chain);
/* Return valid channel */
u8 iwl_get_single_channel_number(struct iwl_priv *priv,
enum ieee80211_band band)
{
const struct iwl_channel_info *ch_info;
int i;
u8 channel = 0;
/* only scan single channel, good enough to reset the RF */
/* pick the first valid not in-use channel */
if (band == IEEE80211_BAND_5GHZ) {
for (i = 14; i < priv->channel_count; i++) {
if (priv->channel_info[i].channel !=
le16_to_cpu(priv->staging_rxon.channel)) {
channel = priv->channel_info[i].channel;
ch_info = iwl_get_channel_info(priv,
band, channel);
if (is_channel_valid(ch_info))
break;
}
}
} else {
for (i = 0; i < 14; i++) {
if (priv->channel_info[i].channel !=
le16_to_cpu(priv->staging_rxon.channel)) {
channel =
priv->channel_info[i].channel;
ch_info = iwl_get_channel_info(priv,
band, channel);
if (is_channel_valid(ch_info))
break;
}
}
}
return channel;
}
EXPORT_SYMBOL(iwl_get_single_channel_number);
/**
* iwl_set_rxon_channel - Set the phymode and channel values in staging RXON
* @phymode: MODE_IEEE80211A sets to 5.2GHz; all else set to 2.4GHz
......
......@@ -343,6 +343,8 @@ int iwl_check_rxon_cmd(struct iwl_priv *priv);
int iwl_full_rxon_required(struct iwl_priv *priv);
void iwl_set_rxon_chain(struct iwl_priv *priv);
int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch);
u8 iwl_get_single_channel_number(struct iwl_priv *priv,
enum ieee80211_band band);
void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf);
u8 iwl_is_ht40_tx_allowed(struct iwl_priv *priv,
struct ieee80211_sta_ht_cap *sta_ht_inf);
......
......@@ -1844,6 +1844,49 @@ static void iwl3945_irq_tasklet(struct iwl_priv *priv)
#endif
}
static int iwl3945_get_single_channel_for_scan(struct iwl_priv *priv,
struct ieee80211_vif *vif,
enum ieee80211_band band,
struct iwl3945_scan_channel *scan_ch)
{
const struct ieee80211_supported_band *sband;
u16 passive_dwell = 0;
u16 active_dwell = 0;
int added = 0;
u8 channel = 0;
sband = iwl_get_hw_mode(priv, band);
if (!sband) {
IWL_ERR(priv, "invalid band\n");
return added;
}
active_dwell = iwl_get_active_dwell_time(priv, band, 0);
passive_dwell = iwl_get_passive_dwell_time(priv, band, vif);
if (passive_dwell <= active_dwell)
passive_dwell = active_dwell + 1;
channel = iwl_get_single_channel_number(priv, band);
if (channel) {
scan_ch->channel = channel;
scan_ch->type = 0; /* passive */
scan_ch->active_dwell = cpu_to_le16(active_dwell);
scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
/* Set txpower levels to defaults */
scan_ch->tpc.dsp_atten = 110;
if (band == IEEE80211_BAND_5GHZ)
scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
else
scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
added++;
} else
IWL_ERR(priv, "no valid channel found\n");
return added;
}
static int iwl3945_get_channels_for_scan(struct iwl_priv *priv,
enum ieee80211_band band,
u8 is_active, u8 n_probes,
......@@ -2992,9 +3035,16 @@ void iwl3945_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
/* select Rx antennas */
scan->flags |= iwl3945_get_antenna_flags(priv);
scan->channel_count =
iwl3945_get_channels_for_scan(priv, band, is_active, n_probes,
(void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)], vif);
if (priv->is_internal_short_scan) {
scan->channel_count =
iwl3945_get_single_channel_for_scan(priv, vif, band,
(void *)&scan->data[le16_to_cpu(
scan->tx_cmd.len)]);
} else {
scan->channel_count =
iwl3945_get_channels_for_scan(priv, band, is_active, n_probes,
(void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)], vif);
}
if (scan->channel_count == 0) {
IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册