提交 13ffadd1 编写于 作者: B Ben Widawsky 提交者: Daniel Vetter

drm/i915/bdw: Expand FADD to 64bit

For error state, like the recent modification to ACTHD, FADD also gets
an upper dword. This is useful for debug to make sure the fetch address
and head are similar.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
上级 64bed788
......@@ -359,7 +359,7 @@ struct drm_i915_error_state {
u64 bbaddr;
u64 acthd;
u32 fault_reg;
u32 faddr;
u64 faddr;
u32 rc_psmi; /* sleep state */
u32 semaphore_mboxes[I915_NUM_RINGS - 1];
......
......@@ -257,7 +257,8 @@ static void i915_ring_error_state(struct drm_i915_error_state_buf *m,
err_printf(m, " INSTPS: 0x%08x\n", ring->instps);
}
err_printf(m, " INSTPM: 0x%08x\n", ring->instpm);
err_printf(m, " FADDR: 0x%08x\n", ring->faddr);
err_printf(m, " FADDR: 0x%08x %08x\n", upper_32_bits(ring->faddr),
lower_32_bits(ring->faddr));
if (INTEL_INFO(dev)->gen >= 6) {
err_printf(m, " RC PSMI: 0x%08x\n", ring->rc_psmi);
err_printf(m, " FAULT_REG: 0x%08x\n", ring->fault_reg);
......@@ -781,8 +782,10 @@ static void i915_record_ring_state(struct drm_device *dev,
ering->instdone = I915_READ(RING_INSTDONE(ring->mmio_base));
ering->instps = I915_READ(RING_INSTPS(ring->mmio_base));
ering->bbaddr = I915_READ(RING_BBADDR(ring->mmio_base));
if (INTEL_INFO(dev)->gen >= 8)
if (INTEL_INFO(dev)->gen >= 8) {
ering->faddr |= (u64) I915_READ(RING_DMA_FADD_UDW(ring->mmio_base)) << 32;
ering->bbaddr |= (u64) I915_READ(RING_BBADDR_UDW(ring->mmio_base)) << 32;
}
ering->bbstate = I915_READ(RING_BBSTATE(ring->mmio_base));
} else {
ering->faddr = I915_READ(DMA_FADD_I8XX);
......
......@@ -835,6 +835,7 @@ enum punit_power_well {
#define RING_INSTDONE(base) ((base)+0x6c)
#define RING_INSTPS(base) ((base)+0x70)
#define RING_DMA_FADD(base) ((base)+0x78)
#define RING_DMA_FADD_UDW(base) ((base)+0x60) /* gen8+ */
#define RING_INSTPM(base) ((base)+0xc0)
#define RING_MI_MODE(base) ((base)+0x9c)
#define INSTPS 0x02070 /* 965+ only */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册