net: remove ks8695 driver

The platform is getting removed, so there are no remaining
users of this driver.

Link: https://lore.kernel.org/r/20190809202749.742267-6-arnd@arndb.deSigned-off-by: NArnd Bergmann <arnd@arndb.de>

drivers/net/ethernet/micrel/Kconfig

@@ -6,8 +6,7 @@
 config NET_VENDOR_MICREL
 	bool "Micrel devices"
 	default y
-	depends on (HAS_IOMEM && DMA_ENGINE) || SPI || PCI || HAS_IOMEM || \
-		   (ARM && ARCH_KS8695)
+	depends on (HAS_IOMEM && DMA_ENGINE) || SPI || PCI || HAS_IOMEM
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y.
 
@@ -18,14 +17,6 @@ config NET_VENDOR_MICREL
 
 if NET_VENDOR_MICREL
 
-config ARM_KS8695_ETHER
-	tristate "KS8695 Ethernet support"
-	depends on ARM && ARCH_KS8695
-	select MII
-	---help---
-	  If you wish to compile a kernel for the KS8695 and want to
-	  use the internal ethernet then you should answer Y to this.
-
 config KS8842
 	tristate "Micrel KSZ8841/42 with generic bus interface"
 	depends on HAS_IOMEM && DMA_ENGINE

drivers/net/ethernet/micrel/Makefile

@@ -3,7 +3,6 @@
 # Makefile for the Micrel network device drivers.
 #
 
-obj-$(CONFIG_ARM_KS8695_ETHER) += ks8695net.o
 obj-$(CONFIG_KS8842) += ks8842.o
 obj-$(CONFIG_KS8851) += ks8851.o
 obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o

drivers/net/ethernet/micrel/ks8695net.h

-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Micrel KS8695 (Centaur) Ethernet.
- *
- * Copyright 2008 Simtec Electronics
- *		  Daniel Silverstone <dsilvers@simtec.co.uk>
- *		  Vincent Sanders <vince@simtec.co.uk>
- */
-
-#ifndef KS8695NET_H
-#define KS8695NET_H
-
-/* Receive descriptor flags */
-#define RDES_OWN	(1 << 31)	/* Ownership */
-#define RDES_FS		(1 << 30)	/* First Descriptor */
-#define RDES_LS		(1 << 29)	/* Last Descriptor */
-#define RDES_IPE	(1 << 28)	/* IP Checksum error */
-#define RDES_TCPE	(1 << 27)	/* TCP Checksum error */
-#define RDES_UDPE	(1 << 26)	/* UDP Checksum error */
-#define RDES_ES		(1 << 25)	/* Error summary */
-#define RDES_MF		(1 << 24)	/* Multicast Frame */
-#define RDES_RE		(1 << 19)	/* MII Error reported */
-#define RDES_TL		(1 << 18)	/* Frame too Long */
-#define RDES_RF		(1 << 17)	/* Runt Frame */
-#define RDES_CE		(1 << 16)	/* CRC error */
-#define RDES_FT		(1 << 15)	/* Frame Type */
-#define RDES_FLEN	(0x7ff)		/* Frame Length */
-
-#define RDES_RER	(1 << 25)	/* Receive End of Ring */
-#define RDES_RBS	(0x7ff)		/* Receive Buffer Size */
-
-/* Transmit descriptor flags */
-
-#define TDES_OWN	(1 << 31)	/* Ownership */
-
-#define TDES_IC		(1 << 31)	/* Interrupt on Completion */
-#define TDES_FS		(1 << 30)	/* First Segment */
-#define TDES_LS		(1 << 29)	/* Last Segment */
-#define TDES_IPCKG	(1 << 28)	/* IP Checksum generate */
-#define TDES_TCPCKG	(1 << 27)	/* TCP Checksum generate */
-#define TDES_UDPCKG	(1 << 26)	/* UDP Checksum generate */
-#define TDES_TER	(1 << 25)	/* Transmit End of Ring */
-#define TDES_TBS	(0x7ff)		/* Transmit Buffer Size */
-
-/*
- * Network controller register offsets
- */
-#define KS8695_DTXC		(0x00)		/* DMA Transmit Control */
-#define KS8695_DRXC		(0x04)		/* DMA Receive Control */
-#define KS8695_DTSC		(0x08)		/* DMA Transmit Start Command */
-#define KS8695_DRSC		(0x0c)		/* DMA Receive Start Command */
-#define KS8695_TDLB		(0x10)		/* Transmit Descriptor List
-						 * Base Address
-						 */
-#define KS8695_RDLB		(0x14)		/* Receive Descriptor List
-						 * Base Address
-						 */
-#define KS8695_MAL		(0x18)		/* MAC Station Address Low */
-#define KS8695_MAH		(0x1c)		/* MAC Station Address High */
-#define KS8695_AAL_(n)		(0x80 + ((n)*8))	/* MAC Additional
-							 * Station Address
-							 * (0..15) Low
-							 */
-#define KS8695_AAH_(n)		(0x84 + ((n)*8))	/* MAC Additional
-							 * Station Address
-							 * (0..15) High
-							 */
-
-
-/* DMA Transmit Control Register */
-#define DTXC_TRST		(1    << 31)	/* Soft Reset */
-#define DTXC_TBS		(0x3f << 24)	/* Transmit Burst Size */
-#define DTXC_TUCG		(1    << 18)	/* Transmit UDP
-						 * Checksum Generate
-						 */
-#define DTXC_TTCG		(1    << 17)	/* Transmit TCP
-						 * Checksum Generate
-						 */
-#define DTXC_TICG		(1    << 16)	/* Transmit IP
-						 * Checksum Generate
-						 */
-#define DTXC_TFCE		(1    <<  9)	/* Transmit Flow
-						 * Control Enable
-						 */
-#define DTXC_TLB		(1    <<  8)	/* Loopback mode */
-#define DTXC_TEP		(1    <<  2)	/* Transmit Enable Padding */
-#define DTXC_TAC		(1    <<  1)	/* Transmit Add CRC */
-#define DTXC_TE			(1    <<  0)	/* TX Enable */
-
-/* DMA Receive Control Register */
-#define DRXC_RBS		(0x3f << 24)	/* Receive Burst Size */
-#define DRXC_RUCC		(1    << 18)	/* Receive UDP Checksum check */
-#define DRXC_RTCG		(1    << 17)	/* Receive TCP Checksum check */
-#define DRXC_RICG		(1    << 16)	/* Receive IP Checksum check */
-#define DRXC_RFCE		(1    <<  9)	/* Receive Flow Control
-						 * Enable
-						 */
-#define DRXC_RB			(1    <<  6)	/* Receive Broadcast */
-#define DRXC_RM			(1    <<  5)	/* Receive Multicast */
-#define DRXC_RU			(1    <<  4)	/* Receive Unicast */
-#define DRXC_RERR		(1    <<  3)	/* Receive Error Frame */
-#define DRXC_RA			(1    <<  2)	/* Receive All */
-#define DRXC_RE			(1    <<  0)	/* RX Enable */
-
-/* Additional Station Address High */
-#define AAH_E			(1    << 31)	/* Address Enabled */
-
-#endif /* KS8695NET_H */