Powerpc KVM work is based on a commit after rc4.

Merging master into next to satisfy the dependencies.

Conflicts:
	arch/arm/kvm/reset.c

CREDITS

@@ -2808,8 +2808,7 @@ S: Ottawa, Ontario
 S: Canada K2P 0X8
 
 N: Mikael Pettersson
-E: mikpe@it.uu.se
-W: http://user.it.uu.se/~mikpe/linux/
+E: mikpelinux@gmail.com
 D: Miscellaneous fixes
 
 N: Reed H. Petty

Documentation/ABI/stable/sysfs-bus-usb

@@ -37,8 +37,8 @@ Description:
 		that the USB device has been connected to the machine.  This
 		file is read-only.
 Users:
-		PowerTOP <power@bughost.org>
-		http://www.lesswatts.org/projects/powertop/
+		PowerTOP <powertop@lists.01.org>
+		https://01.org/powertop/
 
 What:		/sys/bus/usb/device/.../power/active_duration
 Date:		January 2008
@@ -57,8 +57,8 @@ Description:
 		will give an integer percentage.  Note that this does not
 		account for counter wrap.
 Users:
-		PowerTOP <power@bughost.org>
-		http://www.lesswatts.org/projects/powertop/
+		PowerTOP <powertop@lists.01.org>
+		https://01.org/powertop/
 
 What:		/sys/bus/usb/devices/<busnum>-<port[.port]>...:<config num>-<interface num>/supports_autosuspend
 Date:		January 2008

Documentation/ABI/testing/sysfs-devices-power

 What:		/sys/devices/.../power/
 Date:		January 2009
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../power directory contains attributes
 		allowing the user space to check and modify some power
@@ -8,7 +8,7 @@ Description:
 
 What:		/sys/devices/.../power/wakeup
 Date:		January 2009
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../power/wakeup attribute allows the user
 		space to check if the device is enabled to wake up the system
@@ -34,7 +34,7 @@ Description:
 
 What:		/sys/devices/.../power/control
 Date:		January 2009
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../power/control attribute allows the user
 		space to control the run-time power management of the device.
@@ -53,7 +53,7 @@ Description:
 
 What:		/sys/devices/.../power/async
 Date:		January 2009
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../async attribute allows the user space to
 		enable or diasble the device's suspend and resume callbacks to
@@ -79,7 +79,7 @@ Description:
 
 What:		/sys/devices/.../power/wakeup_count
 Date:		September 2010
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../wakeup_count attribute contains the number
 		of signaled wakeup events associated with the device.  This
@@ -88,7 +88,7 @@ Description:
 
 What:		/sys/devices/.../power/wakeup_active_count
 Date:		September 2010
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../wakeup_active_count attribute contains the
 		number of times the processing of wakeup events associated with
@@ -98,7 +98,7 @@ Description:
 
 What:		/sys/devices/.../power/wakeup_abort_count
 Date:		February 2012
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../wakeup_abort_count attribute contains the
 		number of times the processing of a wakeup event associated with
@@ -109,7 +109,7 @@ Description:
 
 What:		/sys/devices/.../power/wakeup_expire_count
 Date:		February 2012
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../wakeup_expire_count attribute contains the
 		number of times a wakeup event associated with the device has
@@ -119,7 +119,7 @@ Description:
 
 What:		/sys/devices/.../power/wakeup_active
 Date:		September 2010
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../wakeup_active attribute contains either 1,
 		or 0, depending on whether or not a wakeup event associated with
@@ -129,7 +129,7 @@ Description:
 
 What:		/sys/devices/.../power/wakeup_total_time_ms
 Date:		September 2010
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../wakeup_total_time_ms attribute contains
 		the total time of processing wakeup events associated with the
@@ -139,7 +139,7 @@ Description:
 
 What:		/sys/devices/.../power/wakeup_max_time_ms
 Date:		September 2010
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../wakeup_max_time_ms attribute contains
 		the maximum time of processing a single wakeup event associated
@@ -149,7 +149,7 @@ Description:
 
 What:		/sys/devices/.../power/wakeup_last_time_ms
 Date:		September 2010
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../wakeup_last_time_ms attribute contains
 		the value of the monotonic clock corresponding to the time of
@@ -160,7 +160,7 @@ Description:
 
 What:		/sys/devices/.../power/wakeup_prevent_sleep_time_ms
 Date:		February 2012
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../wakeup_prevent_sleep_time_ms attribute
 		contains the total time the device has been preventing
@@ -189,7 +189,7 @@ Description:
 
 What:		/sys/devices/.../power/pm_qos_latency_us
 Date:		March 2012
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../power/pm_qos_resume_latency_us attribute
 		contains the PM QoS resume latency limit for the given device,
@@ -207,7 +207,7 @@ Description:
 
 What:		/sys/devices/.../power/pm_qos_no_power_off
 Date:		September 2012
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../power/pm_qos_no_power_off attribute
 		is used for manipulating the PM QoS "no power off" flag.  If
@@ -222,7 +222,7 @@ Description:
 
 What:		/sys/devices/.../power/pm_qos_remote_wakeup
 Date:		September 2012
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../power/pm_qos_remote_wakeup attribute
 		is used for manipulating the PM QoS "remote wakeup required"

Documentation/ABI/testing/sysfs-power

 What:		/sys/power/
 Date:		August 2006
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power directory will contain files that will
 		provide a unified interface to the power management
@@ -8,7 +8,7 @@ Description:
 
 What:		/sys/power/state
 Date:		August 2006
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/state file controls the system power state.
 		Reading from this file returns what states are supported,
@@ -22,7 +22,7 @@ Description:
 
 What:		/sys/power/disk
 Date:		September 2006
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/disk file controls the operating mode of the
 		suspend-to-disk mechanism.  Reading from this file returns
@@ -67,7 +67,7 @@ Description:
 
 What:		/sys/power/image_size
 Date:		August 2006
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/image_size file controls the size of the image
 		created by the suspend-to-disk mechanism.  It can be written a
@@ -84,7 +84,7 @@ Description:
 
 What:		/sys/power/pm_trace
 Date:		August 2006
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/pm_trace file controls the code which saves the
 		last PM event point in the RTC across reboots, so that you can
@@ -133,7 +133,7 @@ Description:
 
 What:		/sys/power/pm_async
 Date:		January 2009
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/pm_async file controls the switch allowing the
 		user space to enable or disable asynchronous suspend and resume
@@ -146,7 +146,7 @@ Description:
 
 What:		/sys/power/wakeup_count
 Date:		July 2010
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/wakeup_count file allows user space to put the
 		system into a sleep state while taking into account the
@@ -161,7 +161,7 @@ Description:
 
 What:		/sys/power/reserved_size
 Date:		May 2011
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/reserved_size file allows user space to control
 		the amount of memory reserved for allocations made by device
@@ -175,7 +175,7 @@ Description:
 
 What:		/sys/power/autosleep
 Date:		April 2012
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/autosleep file can be written one of the strings
 		returned by reads from /sys/power/state.  If that happens, a
@@ -192,7 +192,7 @@ Description:
 
 What:		/sys/power/wake_lock
 Date:		February 2012
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/wake_lock file allows user space to create
 		wakeup source objects and activate them on demand (if one of
@@ -219,7 +219,7 @@ Description:
 
 What:		/sys/power/wake_unlock
 Date:		February 2012
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/wake_unlock file allows user space to deactivate
 		wakeup sources created with the help of /sys/power/wake_lock.

Documentation/acpi/dsdt-override.txt

@@ -4,4 +4,4 @@ CONFIG_ACPI_CUSTOM_DSDT builds the image into the kernel.
 
 When to use this method is described in detail on the
 Linux/ACPI home page:
-http://www.lesswatts.org/projects/acpi/overridingDSDT.php
+https://01.org/linux-acpi/documentation/overriding-dsdt

Documentation/block/00-INDEX

@@ -6,6 +6,8 @@ capability.txt
 	- Generic Block Device Capability (/sys/block/<device>/capability)
 cfq-iosched.txt
 	- CFQ IO scheduler tunables
+cmdline-partition.txt
+	- how to specify block device partitions on kernel command line
 data-integrity.txt
 	- Block data integrity
 deadline-iosched.txt

Documentation/block/cmdline-partition.txt

-Embedded device command line partition
+Embedded device command line partition parsing
 =====================================================================
 
-Read block device partition table from command line.
-The partition used for fixed block device (eMMC) embedded device.
-It is no MBR, save storage space. Bootloader can be easily accessed
+Support for reading the block device partition table from the command line.
+It is typically used for fixed block (eMMC) embedded devices.
+It has no MBR, so saves storage space. Bootloader can be easily accessed
 by absolute address of data on the block device.
 Users can easily change the partition.
 

Documentation/devicetree/bindings/memory.txt

-*** Memory binding ***
-
-The /memory node provides basic information about the address and size
-of the physical memory. This node is usually filled or updated by the
-bootloader, depending on the actual memory configuration of the given
-hardware.
-
-The memory layout is described by the following node:
-
-/ {
-	#address-cells = <(n)>;
-	#size-cells = <(m)>;
-	memory {
-		device_type = "memory";
-		reg =  <(baseaddr1) (size1)
-			(baseaddr2) (size2)
-			...
-			(baseaddrN) (sizeN)>;
-	};
-	...
-};
-
-A memory node follows the typical device tree rules for "reg" property:
-n:		number of cells used to store base address value
-m:		number of cells used to store size value
-baseaddrX:	defines a base address of the defined memory bank
-sizeX:		the size of the defined memory bank
-
-
-More than one memory bank can be defined.
-
-
-*** Reserved memory regions ***
-
-In /memory/reserved-memory node one can create child nodes describing
-particular reserved (excluded from normal use) memory regions. Such
-memory regions are usually designed for the special usage by various
-device drivers. A good example are contiguous memory allocations or
-memory sharing with other operating system on the same hardware board.
-Those special memory regions might depend on the board configuration and
-devices used on the target system.
-
-Parameters for each memory region can be encoded into the device tree
-with the following convention:
-
-[(label):] (name) {
-	compatible = "linux,contiguous-memory-region", "reserved-memory-region";
-	reg = <(address) (size)>;
-	(linux,default-contiguous-region);
-};
-
-compatible:	one or more of:
-	- "linux,contiguous-memory-region" - enables binding of this
-	  region to Contiguous Memory Allocator (special region for
-	  contiguous memory allocations, shared with movable system
-	  memory, Linux kernel-specific).
-	- "reserved-memory-region" - compatibility is defined, given
-	  region is assigned for exclusive usage for by the respective
-	  devices.
-
-reg:	standard property defining the base address and size of
-	the memory region
-
-linux,default-contiguous-region: property indicating that the region
-	is the default region for all contiguous memory
-	allocations, Linux specific (optional)
-
-It is optional to specify the base address, so if one wants to use
-autoconfiguration of the base address, '0' can be specified as a base
-address in the 'reg' property.
-
-The /memory/reserved-memory node must contain the same #address-cells
-and #size-cells value as the root node.
-
-
-*** Device node's properties ***
-
-Once regions in the /memory/reserved-memory node have been defined, they
-may be referenced by other device nodes. Bindings that wish to reference
-memory regions should explicitly document their use of the following
-property:
-
-memory-region = <&phandle_to_defined_region>;
-
-This property indicates that the device driver should use the memory
-region pointed by the given phandle.
-
-
-*** Example ***
-
-This example defines a memory consisting of 4 memory banks. 3 contiguous
-regions are defined for Linux kernel, one default of all device drivers
-(named contig_mem, placed at 0x72000000, 64MiB), one dedicated to the
-framebuffer device (labelled display_mem, placed at 0x78000000, 8MiB)
-and one for multimedia processing (labelled multimedia_mem, placed at
-0x77000000, 64MiB). 'display_mem' region is then assigned to fb@12300000
-device for DMA memory allocations (Linux kernel drivers will use CMA is
-available or dma-exclusive usage otherwise). 'multimedia_mem' is
-assigned to scaler@12500000 and codec@12600000 devices for contiguous
-memory allocations when CMA driver is enabled.
-
-The reason for creating a separate region for framebuffer device is to
-match the framebuffer base address to the one configured by bootloader,
-so once Linux kernel drivers starts no glitches on the displayed boot
-logo appears. Scaller and codec drivers should share the memory
-allocations.
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	/* ... */
-
-	memory {
-		reg =  <0x40000000 0x10000000
-			0x50000000 0x10000000
-			0x60000000 0x10000000
-			0x70000000 0x10000000>;
-
-		reserved-memory {
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			/*
-			 * global autoconfigured region for contiguous allocations
-			 * (used only with Contiguous Memory Allocator)
-			 */
-			contig_region@0 {
-				compatible = "linux,contiguous-memory-region";
-				reg = <0x0 0x4000000>;
-				linux,default-contiguous-region;
-			};
-
-			/*
-			 * special region for framebuffer
-			 */
-			display_region: region@78000000 {
-				compatible = "linux,contiguous-memory-region", "reserved-memory-region";
-				reg = <0x78000000 0x800000>;
-			};
-
-			/*
-			 * special region for multimedia processing devices
-			 */
-			multimedia_region: region@77000000 {
-				compatible = "linux,contiguous-memory-region";
-				reg = <0x77000000 0x4000000>;
-			};
-		};
-	};
-
-	/* ... */
-
-	fb0: fb@12300000 {
-		status = "okay";
-		memory-region = <&display_region>;
-	};
-
-	scaler: scaler@12500000 {
-		status = "okay";
-		memory-region = <&multimedia_region>;
-	};
-
-	codec: codec@12600000 {
-		status = "okay";
-		memory-region = <&multimedia_region>;
-	};
-};

Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt

-* Samsung Exynos specific extensions to the Synopsis Designware Mobile
+* Samsung Exynos specific extensions to the Synopsys Designware Mobile
   Storage Host Controller
 
-The Synopsis designware mobile storage host controller is used to interface
+The Synopsys designware mobile storage host controller is used to interface
 a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
-differences between the core Synopsis dw mshc controller properties described
-by synopsis-dw-mshc.txt and the properties used by the Samsung Exynos specific
-extensions to the Synopsis Designware Mobile Storage Host Controller.
+differences between the core Synopsys dw mshc controller properties described
+by synopsys-dw-mshc.txt and the properties used by the Samsung Exynos specific
+extensions to the Synopsys Designware Mobile Storage Host Controller.
 
 Required Properties:
 

Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt

-* Rockchip specific extensions to the Synopsis Designware Mobile
+* Rockchip specific extensions to the Synopsys Designware Mobile
   Storage Host Controller
 
-The Synopsis designware mobile storage host controller is used to interface
+The Synopsys designware mobile storage host controller is used to interface
 a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
-differences between the core Synopsis dw mshc controller properties described
-by synopsis-dw-mshc.txt and the properties used by the Rockchip specific
-extensions to the Synopsis Designware Mobile Storage Host Controller.
+differences between the core Synopsys dw mshc controller properties described
+by synopsys-dw-mshc.txt and the properties used by the Rockchip specific
+extensions to the Synopsys Designware Mobile Storage Host Controller.
 
 Required Properties:
 

Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt → Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt

-* Synopsis Designware Mobile Storage Host Controller
+* Synopsys Designware Mobile Storage Host Controller
 
-The Synopsis designware mobile storage host controller is used to interface
+The Synopsys designware mobile storage host controller is used to interface
 a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
 differences between the core mmc properties described by mmc.txt and the
-properties used by the Synopsis Designware Mobile Storage Host Controller.
+properties used by the Synopsys Designware Mobile Storage Host Controller.
 
 Required Properties:
 
 * compatible: should be
-	- snps,dw-mshc: for controllers compliant with synopsis dw-mshc.
+	- snps,dw-mshc: for controllers compliant with synopsys dw-mshc.
 * #address-cells: should be 1.
 * #size-cells: should be 0.
 

Documentation/devicetree/bindings/mmc/tmio_mmc.txt

@@ -9,12 +9,15 @@ compulsory and any optional properties, common to all SD/MMC drivers, as
 described in mmc.txt, can be used. Additionally the following tmio_mmc-specific
 optional bindings can be used.
 
+Required properties:
+- compatible:	"renesas,sdhi-shmobile" - a generic sh-mobile SDHI unit
+		"renesas,sdhi-sh7372" - SDHI IP on SH7372 SoC
+		"renesas,sdhi-sh73a0" - SDHI IP on SH73A0 SoC
+		"renesas,sdhi-r8a73a4" - SDHI IP on R8A73A4 SoC
+		"renesas,sdhi-r8a7740" - SDHI IP on R8A7740 SoC
+		"renesas,sdhi-r8a7778" - SDHI IP on R8A7778 SoC
+		"renesas,sdhi-r8a7779" - SDHI IP on R8A7779 SoC
+		"renesas,sdhi-r8a7790" - SDHI IP on R8A7790 SoC
+
 Optional properties:
 - toshiba,mmc-wrprotect-disable: write-protect detection is unavailable
-
-When used with Renesas SDHI hardware, the following compatibility strings
-configure various model-specific properties:
-
-"renesas,sh7372-sdhi":	(default) compatible with SH7372
-"renesas,r8a7740-sdhi":	compatible with R8A7740: certain MMC/SD commands have to
-			wait for the interface to become idle.

Documentation/devicetree/bindings/net/fsl-tsec-phy.txt

@@ -86,6 +86,7 @@ General Properties:
 
 Clock Properties:
 
+  - fsl,cksel        Timer reference clock source.
   - fsl,tclk-period  Timer reference clock period in nanoseconds.
   - fsl,tmr-prsc     Prescaler, divides the output clock.
   - fsl,tmr-add      Frequency compensation value.
@@ -97,7 +98,7 @@ Clock Properties:
   clock. You must choose these carefully for the clock to work right.
   Here is how to figure good values:
 
-  TimerOsc     = system clock               MHz
+  TimerOsc     = selected reference clock   MHz
   tclk_period  = desired clock period       nanoseconds
   NominalFreq  = 1000 / tclk_period         MHz
   FreqDivRatio = TimerOsc / NominalFreq     (must be greater that 1.0)
@@ -114,6 +115,20 @@ Clock Properties:
   Pulse Per Second (PPS) signal, since this will be offered to the PPS
   subsystem to synchronize the Linux clock.
 
+  Reference clock source is determined by the value, which is holded
+  in CKSEL bits in TMR_CTRL register. "fsl,cksel" property keeps the
+  value, which will be directly written in those bits, that is why,
+  according to reference manual, the next clock sources can be used:
+
+  <0> - external high precision timer reference clock (TSEC_TMR_CLK
+        input is used for this purpose);
+  <1> - eTSEC system clock;
+  <2> - eTSEC1 transmit clock;
+  <3> - RTC clock input.
+
+  When this attribute is not used, eTSEC system clock will serve as
+  IEEE 1588 timer reference clock.
+
 Example:
 
 	ptp_clock@24E00 {
@@ -121,6 +136,7 @@ Example:
 		reg = <0x24E00 0xB0>;
 		interrupts = <12 0x8 13 0x8>;
 		interrupt-parent = < &ipic >;
+		fsl,cksel       = <1>;
 		fsl,tclk-period = <10>;
 		fsl,tmr-prsc    = <100>;
 		fsl,tmr-add     = <0x999999A4>;

Documentation/devicetree/bindings/pci/designware-pcie.txt

-* Synopsis Designware PCIe interface
+* Synopsys Designware PCIe interface
 
 Required properties:
 - compatible: should contain "snps,dw-pcie" to identify the

Documentation/kernel-parameters.txt

@@ -480,6 +480,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Format: <io>,<irq>,<mode>
 			See header of drivers/net/hamradio/baycom_ser_hdx.c.
 
+	blkdevparts=	Manual partition parsing of block device(s) for
+			embedded devices based on command line input.
+			See Documentation/block/cmdline-partition.txt
+
 	boot_delay=	Milliseconds to delay each printk during boot.
 			Values larger than 10 seconds (10000) are changed to
 			no delay (0).
@@ -1357,7 +1361,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			pages. In the event, a node is too small to have both
 			kernelcore and Movable pages, kernelcore pages will
 			take priority and other nodes will have a larger number
-			of kernelcore pages.  The Movable zone is used for the
+			of Movable pages.  The Movable zone is used for the
 			allocation of pages that may be reclaimed or moved
 			by the page migration subsystem.  This means that
 			HugeTLB pages may not be allocated from this zone.
@@ -3485,6 +3489,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 				the unplug protocol
 			never -- do not unplug even if version check succeeds
 
+	xen_nopvspin	[X86,XEN]
+			Disables the ticketlock slowpath using Xen PV
+			optimizations.
+
 	xirc2ps_cs=	[NET,PCMCIA]
 			Format:
 			<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -28,6 +28,7 @@ ALC269/270/275/276/28x/29x
   alc269-dmic		Enable ALC269(VA) digital mic workaround
   alc271-dmic		Enable ALC271X digital mic workaround
   inv-dmic		Inverted internal mic workaround
+  headset-mic		Indicates a combined headset (headphone+mic) jack
   lenovo-dock   	Enables docking station I/O for some Lenovos
   dell-headset-multi	Headset jack, which can also be used as mic-in
   dell-headset-dock	Headset jack (without mic-in), and also dock I/O
@@ -296,6 +297,12 @@ Cirrus Logic CS4206/4207
   imac27	IMac 27 Inch
   auto		BIOS setup (default)
 
+Cirrus Logic CS4208
+===================
+  mba6		MacBook Air 6,1 and 6,2
+  gpio0		Enable GPIO 0 amp
+  auto		BIOS setup (default)
+
 VIA VT17xx/VT18xx/VT20xx
 ========================
   auto		BIOS setup (default)

MAINTAINERS

@@ -237,11 +237,11 @@ F:	drivers/platform/x86/acer-wmi.c
 
 ACPI
 M:	Len Brown <lenb@kernel.org>
-M:	Rafael J. Wysocki <rjw@sisk.pl>
+M:	Rafael J. Wysocki <rjw@rjwysocki.net>
 L:	linux-acpi@vger.kernel.org
-W:	http://www.lesswatts.org/projects/acpi/
-Q:	http://patchwork.kernel.org/project/linux-acpi/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
+W:	https://01.org/linux-acpi
+Q:	https://patchwork.kernel.org/project/linux-acpi/list/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
 S:	Supported
 F:	drivers/acpi/
 F:	drivers/pnp/pnpacpi/
@@ -256,21 +256,21 @@ F:	drivers/pci/*/*/*acpi*
 ACPI FAN DRIVER
 M:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
-W:	http://www.lesswatts.org/projects/acpi/
+W:	https://01.org/linux-acpi
 S:	Supported
 F:	drivers/acpi/fan.c
 
 ACPI THERMAL DRIVER
 M:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
-W:	http://www.lesswatts.org/projects/acpi/
+W:	https://01.org/linux-acpi
 S:	Supported
 F:	drivers/acpi/*thermal*
 
 ACPI VIDEO DRIVER
 M:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
-W:	http://www.lesswatts.org/projects/acpi/
+W:	https://01.org/linux-acpi
 S:	Supported
 F:	drivers/acpi/video.c
 
@@ -824,15 +824,21 @@ S:	Maintained
 F:	arch/arm/mach-gemini/
 
 ARM/CSR SIRFPRIMA2 MACHINE SUPPORT
-M:	Barry Song <baohua.song@csr.com>
+M:	Barry Song <baohua@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux.git
 S:	Maintained
 F:	arch/arm/mach-prima2/
+F:	drivers/clk/clk-prima2.c
+F:	drivers/clocksource/timer-prima2.c
+F:	drivers/clocksource/timer-marco.c
 F:	drivers/dma/sirf-dma.c
 F:	drivers/i2c/busses/i2c-sirf.c
+F:	drivers/input/misc/sirfsoc-onkey.c
+F:	drivers/irqchip/irq-sirfsoc.c
 F:	drivers/mmc/host/sdhci-sirf.c
 F:	drivers/pinctrl/sirf/
+F:	drivers/rtc/rtc-sirfsoc.c
 F:	drivers/spi/spi-sirf.c
 
 ARM/EBSA110 MACHINE SUPPORT
@@ -1812,7 +1818,8 @@ S:	Supported
 F:	drivers/net/ethernet/broadcom/bnx2x/
 
 BROADCOM BCM281XX/BCM11XXX ARM ARCHITECTURE
-M:	Christian Daudt <csd@broadcom.com>
+M:	Christian Daudt <bcm@fixthebug.org>
+L:	bcm-kernel-feedback-list@broadcom.com
 T:	git git://git.github.com/broadcom/bcm11351
 S:	Maintained
 F:	arch/arm/mach-bcm/
@@ -2293,7 +2300,7 @@ S:	Maintained
 F:	drivers/net/ethernet/ti/cpmac.c
 
 CPU FREQUENCY DRIVERS
-M:	Rafael J. Wysocki <rjw@sisk.pl>
+M:	Rafael J. Wysocki <rjw@rjwysocki.net>
 M:	Viresh Kumar <viresh.kumar@linaro.org>
 L:	cpufreq@vger.kernel.org
 L:	linux-pm@vger.kernel.org
@@ -2324,7 +2331,7 @@ S:      Maintained
 F:      drivers/cpuidle/cpuidle-big_little.c
 
 CPUIDLE DRIVERS
-M:	Rafael J. Wysocki <rjw@sisk.pl>
+M:	Rafael J. Wysocki <rjw@rjwysocki.net>
 M:	Daniel Lezcano <daniel.lezcano@linaro.org>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
@@ -2639,6 +2646,18 @@ F:	include/linux/device-mapper.h
 F:	include/linux/dm-*.h
 F:	include/uapi/linux/dm-*.h
 
+DIGI NEO AND CLASSIC PCI PRODUCTS
+M:	Lidza Louina <lidza.louina@gmail.com>
+L:	driverdev-devel@linuxdriverproject.org
+S:	Maintained
+F:	drivers/staging/dgnc/
+
+DIGI EPCA PCI PRODUCTS
+M:	Lidza Louina <lidza.louina@gmail.com>
+L:	driverdev-devel@linuxdriverproject.org
+S:	Maintained
+F:	drivers/staging/dgap/
+
 DIOLAN U2C-12 I2C DRIVER
 M:	Guenter Roeck <linux@roeck-us.net>
 L:	linux-i2c@vger.kernel.org
@@ -3534,7 +3553,7 @@ F:	fs/freevxfs/
 
 FREEZER
 M:	Pavel Machek <pavel@ucw.cz>
-M:	"Rafael J. Wysocki" <rjw@sisk.pl>
+M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
 L:	linux-pm@vger.kernel.org
 S:	Supported
 F:	Documentation/power/freezing-of-tasks.txt
@@ -3870,7 +3889,7 @@ F:	drivers/video/hgafb.c
 
 HIBERNATION (aka Software Suspend, aka swsusp)
 M:	Pavel Machek <pavel@ucw.cz>
-M:	"Rafael J. Wysocki" <rjw@sisk.pl>
+M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
 L:	linux-pm@vger.kernel.org
 S:	Supported
 F:	arch/x86/power/
@@ -4320,7 +4339,7 @@ F:	drivers/video/i810/
 INTEL MENLOW THERMAL DRIVER
 M:	Sujith Thomas <sujith.thomas@intel.com>
 L:	platform-driver-x86@vger.kernel.org
-W:	http://www.lesswatts.org/projects/acpi/
+W:	https://01.org/linux-acpi
 S:	Supported
 F:	drivers/platform/x86/intel_menlow.c
 
@@ -4457,6 +4476,13 @@ L:	linux-serial@vger.kernel.org
 S:	Maintained
 F:	drivers/tty/serial/ioc3_serial.c
 
+IOMMU DRIVERS
+M:	Joerg Roedel <joro@8bytes.org>
+L:	iommu@lists.linux-foundation.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
+S:	Maintained
+F:	drivers/iommu/
+
 IP MASQUERADING
 M:	Juanjo Ciarlante <jjciarla@raiz.uncu.edu.ar>
 S:	Maintained
@@ -6595,7 +6621,7 @@ S:	Obsolete
 F:	drivers/net/wireless/prism54/
 
 PROMISE SATA TX2/TX4 CONTROLLER LIBATA DRIVER
-M:	Mikael Pettersson <mikpe@it.uu.se>
+M:	Mikael Pettersson <mikpelinux@gmail.com>
 L:	linux-ide@vger.kernel.org
 S:	Maintained
 F:	drivers/ata/sata_promise.*
@@ -7258,9 +7284,9 @@ F:	include/linux/sched.h
 F:	include/uapi/linux/sched.h
 
 SCORE ARCHITECTURE
-M:	Chen Liqin <liqin.chen@sunplusct.com>
+M:	Chen Liqin <liqin.linux@gmail.com>
 M:	Lennox Wu <lennox.wu@gmail.com>
-W:	http://www.sunplusct.com
+W:	http://www.sunplus.com
 S:	Supported
 F:	arch/score/
 
@@ -8069,7 +8095,7 @@ F:	drivers/sh/
 SUSPEND TO RAM
 M:	Len Brown <len.brown@intel.com>
 M:	Pavel Machek <pavel@ucw.cz>
-M:	"Rafael J. Wysocki" <rjw@sisk.pl>
+M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
 L:	linux-pm@vger.kernel.org
 S:	Supported
 F:	Documentation/power/
@@ -8724,9 +8750,8 @@ F:	Documentation/hid/hiddev.txt
 F:	drivers/hid/usbhid/
 
 USB/IP DRIVERS
-M:	Matt Mooney <mfm@muteddisk.com>
 L:	linux-usb@vger.kernel.org
-S:	Maintained
+S:	Orphan
 F:	drivers/staging/usbip/
 
 USB ISP116X DRIVER
@@ -9366,6 +9391,7 @@ F:	arch/arm64/include/asm/xen/
 
 XEN NETWORK BACKEND DRIVER
 M:	Ian Campbell <ian.campbell@citrix.com>
+M:	Wei Liu <wei.liu2@citrix.com>
 L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
 L:	netdev@vger.kernel.org
 S:	Supported

Makefile

 VERSION = 3
 PATCHLEVEL = 12
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc5
 NAME = One Giant Leap for Frogkind
 
 # *DOCUMENTATION*

arch/Kconfig

@@ -286,9 +286,6 @@ config HAVE_PERF_USER_STACK_DUMP
 config HAVE_ARCH_JUMP_LABEL
 	bool
 
-config HAVE_ARCH_MUTEX_CPU_RELAX
-	bool
-
 config HAVE_RCU_TABLE_FREE
 	bool
 

arch/arc/include/asm/spinlock.h

@@ -45,7 +45,14 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock)
 
 static inline void arch_spin_unlock(arch_spinlock_t *lock)
 {
-	lock->slock = __ARCH_SPIN_LOCK_UNLOCKED__;
+	unsigned int tmp = __ARCH_SPIN_LOCK_UNLOCKED__;
+
+	__asm__ __volatile__(
+	"	ex  %0, [%1]		\n"
+	: "+r" (tmp)
+	: "r"(&(lock->slock))
+	: "memory");
+
 	smp_mb();
 }
 

arch/arc/include/asm/uaccess.h

@@ -43,7 +43,7 @@
  * Because it essentially checks if buffer end is within limit and @len is
  * non-ngeative, which implies that buffer start will be within limit too.
  *
- * The reason for rewriting being, for majorit yof cases, @len is generally
+ * The reason for rewriting being, for majority of cases, @len is generally
  * compile time constant, causing first sub-expression to be compile time
  * subsumed.
  *
@@ -53,7 +53,7 @@
  *
  */
 #define __user_ok(addr, sz)	(((sz) <= TASK_SIZE) && \
-				 (((addr)+(sz)) <= get_fs()))
+				 ((addr) <= (get_fs() - (sz))))
 #define __access_ok(addr, sz)	(unlikely(__kernel_ok) || \
 				 likely(__user_ok((addr), (sz))))
 

arch/arc/kernel/ptrace.c

@@ -102,7 +102,7 @@ static int genregs_set(struct task_struct *target,
 	REG_IGNORE_ONE(pad2);
 	REG_IN_CHUNK(callee, efa, cregs);	/* callee_regs[r25..r13] */
 	REG_IGNORE_ONE(efa);			/* efa update invalid */
-	REG_IN_ONE(stop_pc, &ptregs->ret);	/* stop_pc: PC update */
+	REG_IGNORE_ONE(stop_pc);			/* PC updated via @ret */
 
 	return ret;
 }

arch/arc/kernel/signal.c

@@ -101,7 +101,6 @@ SYSCALL_DEFINE0(rt_sigreturn)
 {
 	struct rt_sigframe __user *sf;
 	unsigned int magic;
-	int err;
 	struct pt_regs *regs = current_pt_regs();
 
 	/* Always make any pending restarted system calls return -EINTR */
@@ -119,15 +118,16 @@ SYSCALL_DEFINE0(rt_sigreturn)
 	if (!access_ok(VERIFY_READ, sf, sizeof(*sf)))
 		goto badframe;
 
-	err = restore_usr_regs(regs, sf);
-	err |= __get_user(magic, &sf->sigret_magic);
-	if (err)
+	if (__get_user(magic, &sf->sigret_magic))
 		goto badframe;
 
 	if (unlikely(is_do_ss_needed(magic)))
 		if (restore_altstack(&sf->uc.uc_stack))
 			goto badframe;
 
+	if (restore_usr_regs(regs, sf))
+		goto badframe;
+
 	/* Don't restart from sigreturn */
 	syscall_wont_restart(regs);
 
@@ -190,6 +190,15 @@ setup_rt_frame(int signo, struct k_sigaction *ka, siginfo_t *info,
 	if (!sf)
 		return 1;
 
+	/*
+	 * w/o SA_SIGINFO, struct ucontext is partially populated (only
+	 * uc_mcontext/uc_sigmask) for kernel's normal user state preservation
+	 * during signal handler execution. This works for SA_SIGINFO as well
+	 * although the semantics are now overloaded (the same reg state can be
+	 * inspected by userland: but are they allowed to fiddle with it ?
+	 */
+	err |= stash_usr_regs(sf, regs, set);
+
 	/*
 	 * SA_SIGINFO requires 3 args to signal handler:
 	 *  #1: sig-no (common to any handler)
@@ -213,14 +222,6 @@ setup_rt_frame(int signo, struct k_sigaction *ka, siginfo_t *info,
 		magic = MAGIC_SIGALTSTK;
 	}
 
-	/*
-	 * w/o SA_SIGINFO, struct ucontext is partially populated (only
-	 * uc_mcontext/uc_sigmask) for kernel's normal user state preservation
-	 * during signal handler execution. This works for SA_SIGINFO as well
-	 * although the semantics are now overloaded (the same reg state can be
-	 * inspected by userland: but are they allowed to fiddle with it ?
-	 */
-	err |= stash_usr_regs(sf, regs, set);
 	err |= __put_user(magic, &sf->sigret_magic);
 	if (err)
 		return err;

arch/arc/kernel/time.c

@@ -227,12 +227,9 @@ void __attribute__((weak)) arc_local_timer_setup(unsigned int cpu)
 {
 	struct clock_event_device *clk = &per_cpu(arc_clockevent_device, cpu);
 
-	clockevents_calc_mult_shift(clk, arc_get_core_freq(), 5);
-
-	clk->max_delta_ns = clockevent_delta2ns(ARC_TIMER_MAX, clk);
 	clk->cpumask = cpumask_of(cpu);
-
-	clockevents_register_device(clk);
+	clockevents_config_and_register(clk, arc_get_core_freq(),
+					0, ARC_TIMER_MAX);
 
 	/*
 	 * setup the per-cpu timer IRQ handler - for all cpus

arch/arc/kernel/unaligned.c

@@ -245,6 +245,12 @@ int misaligned_fixup(unsigned long address, struct pt_regs *regs,
 		regs->status32 &= ~STATUS_DE_MASK;
 	} else {
 		regs->ret += state.instr_len;
+
+		/* handle zero-overhead-loop */
+		if ((regs->ret == regs->lp_end) && (regs->lp_count)) {
+			regs->ret = regs->lp_start;
+			regs->lp_count--;
+		}
 	}
 
 	return 0;

arch/arm/Kconfig

@@ -2217,8 +2217,7 @@ config NEON
 
 config KERNEL_MODE_NEON
 	bool "Support for NEON in kernel mode"
-	default n
-	depends on NEON
+	depends on NEON && AEABI
 	help
 	  Say Y to include support for NEON in kernel mode.
 

arch/arm/Makefile

@@ -296,10 +296,15 @@ archprepare:
 # Convert bzImage to zImage
 bzImage: zImage
 
-zImage Image xipImage bootpImage uImage: vmlinux
+BOOT_TARGETS	= zImage Image xipImage bootpImage uImage
+INSTALL_TARGETS	= zinstall uinstall install
+
+PHONY += bzImage $(BOOT_TARGETS) $(INSTALL_TARGETS)
+
+$(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 
-zinstall uinstall install: vmlinux
+$(INSTALL_TARGETS):
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
 
 %.dtb: | scripts

arch/arm/boot/Makefile

@@ -95,24 +95,24 @@ initrd:
 	@test "$(INITRD)" != "" || \
 	(echo You must specify INITRD; exit -1)
 
-install: $(obj)/Image
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+install:
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
 	$(obj)/Image System.map "$(INSTALL_PATH)"
 
-zinstall: $(obj)/zImage
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+zinstall:
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
 	$(obj)/zImage System.map "$(INSTALL_PATH)"
 
-uinstall: $(obj)/uImage
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+uinstall:
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
 	$(obj)/uImage System.map "$(INSTALL_PATH)"
 
 zi:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
 	$(obj)/zImage System.map "$(INSTALL_PATH)"
 
 i:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
 	$(obj)/Image System.map "$(INSTALL_PATH)"
 
 subdir-	    := bootp compressed dts

arch/arm/boot/dts/Makefile

@@ -41,6 +41,8 @@ dtb-$(CONFIG_ARCH_AT91)	+= sama5d33ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d34ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d35ek.dtb
 
+dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
+
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
 dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \
 	bcm28155-ap.dtb

arch/arm/boot/dts/armada-370-netgear-rn102.dts

@@ -27,6 +27,25 @@
 	};
 
 	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* Connected to Marvell SATA controller */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Connected to FL1009 USB 3.0 controller */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
 		internal-regs {
 			serial@12000 {
 				clock-frequency = <200000000>;
@@ -57,6 +76,11 @@
 					marvell,pins = "mpp56";
 					marvell,function = "gpio";
 				};
+
+				poweroff: poweroff {
+					marvell,pins = "mpp8";
+					marvell,function = "gpio";
+				};
 			};
 
 			mdio {
@@ -89,22 +113,6 @@
 					pwm_polarity = <0>;
 				};
 			};
-
-			pcie-controller {
-				status = "okay";
-
-				/* Connected to Marvell SATA controller */
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-
-				/* Connected to FL1009 USB 3.0 controller */
-				pcie@2,0 {
-					/* Port 1, Lane 0 */
-					status = "okay";
-				};
-			};
 		};
 	};
 
@@ -160,7 +168,7 @@
 		button@1 {
 			label = "Power Button";
 			linux,code = <116>;     /* KEY_POWER */
-			gpios = <&gpio1 30 1>;
+			gpios = <&gpio1 30 0>;
 		};
 
 		button@2 {
@@ -176,4 +184,11 @@
 		};
 	};
 
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 8 1>;
+	};
+
 };

arch/arm/boot/dts/armada-xp.dtsi

@@ -70,6 +70,8 @@
 
 			timer@20300 {
 				compatible = "marvell,armada-xp-timer";
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
 			};
 
 			coreclk: mvebu-sar@18230 {
@@ -169,4 +171,13 @@
 			};
 		};
 	};
+
+	clocks {
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
 };

arch/arm/boot/dts/at91sam9x5.dtsi

@@ -190,12 +190,12 @@
 							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA8 periph A */
 					};
 
-					pinctrl_uart2_rts: uart2_rts-0 {
+					pinctrl_usart2_rts: usart2_rts-0 {
 						atmel,pins =
 							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
 					};
 
-					pinctrl_uart2_cts: uart2_cts-0 {
+					pinctrl_usart2_cts: usart2_cts-0 {
 						atmel,pins =
 							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
 					};
@@ -556,6 +556,7 @@
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
+				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -567,6 +568,7 @@
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
+				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";

arch/arm/boot/dts/atlas6.dtsi

@@ -181,6 +181,8 @@
 				interrupts = <17>;
 				fifosize = <128>;
 				clocks = <&clks 13>;
+				sirf,uart-dma-rx-channel = <21>;
+				sirf,uart-dma-tx-channel = <2>;
 			};
 
 			uart1: uart@b0060000 {
@@ -199,6 +201,8 @@
 				interrupts = <19>;
 				fifosize = <128>;
 				clocks = <&clks 15>;
+				sirf,uart-dma-rx-channel = <6>;
+				sirf,uart-dma-tx-channel = <7>;
 			};
 
 			usp0: usp@b0080000 {
@@ -206,7 +210,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb0080000 0x10000>;
 				interrupts = <20>;
+				fifosize = <128>;
 				clocks = <&clks 28>;
+				sirf,usp-dma-rx-channel = <17>;
+				sirf,usp-dma-tx-channel = <18>;
 			};
 
 			usp1: usp@b0090000 {
@@ -214,7 +221,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb0090000 0x10000>;
 				interrupts = <21>;
+				fifosize = <128>;
 				clocks = <&clks 29>;
+				sirf,usp-dma-rx-channel = <14>;
+				sirf,usp-dma-tx-channel = <15>;
 			};
 
 			dmac0: dma-controller@b00b0000 {
@@ -237,6 +247,8 @@
 				compatible = "sirf,prima2-vip";
 				reg = <0xb00C0000 0x10000>;
 				clocks = <&clks 31>;
+				interrupts = <14>;
+				sirf,vip-dma-rx-channel = <16>;
 			};
 
 			spi0: spi@b00d0000 {

arch/arm/boot/dts/exynos5250.dtsi

@@ -96,6 +96,11 @@
 			     <1 14 0xf08>,
 			     <1 11 0xf08>,
 			     <1 10 0xf08>;
+		/* Unfortunately we need this since some versions of U-Boot
+		 * on Exynos don't set the CNTFRQ register, so we need the
+		 * value from DT.
+		 */
+		clock-frequency = <24000000>;
 	};
 
 	mct@101C0000 {

arch/arm/boot/dts/kirkwood.dtsi

@@ -13,6 +13,7 @@
 		cpu@0 {
 			device_type = "cpu";
 			compatible = "marvell,feroceon";
+			reg = <0>;
 			clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
 			clock-names = "cpu_clk", "ddrclk", "powersave";
 		};
@@ -167,7 +168,7 @@
 		xor@60900 {
 			compatible = "marvell,orion-xor";
 			reg = <0x60900 0x100
-			       0xd0B00 0x100>;
+			       0x60B00 0x100>;
 			status = "okay";
 			clocks = <&gate_clk 16>;
 

arch/arm/boot/dts/omap3-beagle-xm.dts

@@ -11,7 +11,7 @@
 
 / {
 	model = "TI OMAP3 BeagleBoard xM";
-	compatible = "ti,omap3-beagle-xm", "ti,omap3-beagle", "ti,omap3";
+	compatible = "ti,omap3-beagle-xm", "ti,omap36xx", "ti,omap3";
 
 	cpus {
 		cpu@0 {

arch/arm/boot/dts/omap3.dtsi

@@ -108,7 +108,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0x7f1f>;
+			pinctrl-single,function-mask = <0xff1f>;
 		};
 
 		omap3_pmx_wkup: pinmux@0x48002a00 {
@@ -117,7 +117,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0x7f1f>;
+			pinctrl-single,function-mask = <0xff1f>;
 		};
 
 		gpio1: gpio@48310000 {

arch/arm/boot/dts/prima2.dtsi

@@ -171,7 +171,8 @@
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0xb0000000 0xb0000000 0x180000>;
+			ranges = <0xb0000000 0xb0000000 0x180000>,
+			       <0x56000000 0x56000000 0x1b00000>;
 
 			timer@b0020000 {
 				compatible = "sirf,prima2-tick";
@@ -196,25 +197,32 @@
 			uart0: uart@b0050000 {
 				cell-index = <0>;
 				compatible = "sirf,prima2-uart";
-				reg = <0xb0050000 0x10000>;
+				reg = <0xb0050000 0x1000>;
 				interrupts = <17>;
+				fifosize = <128>;
 				clocks = <&clks 13>;
+				sirf,uart-dma-rx-channel = <21>;
+				sirf,uart-dma-tx-channel = <2>;
 			};
 
 			uart1: uart@b0060000 {
 				cell-index = <1>;
 				compatible = "sirf,prima2-uart";
-				reg = <0xb0060000 0x10000>;
+				reg = <0xb0060000 0x1000>;
 				interrupts = <18>;
+				fifosize = <32>;
 				clocks = <&clks 14>;
 			};
 
 			uart2: uart@b0070000 {
 				cell-index = <2>;
 				compatible = "sirf,prima2-uart";
-				reg = <0xb0070000 0x10000>;
+				reg = <0xb0070000 0x1000>;
 				interrupts = <19>;
+				fifosize = <128>;
 				clocks = <&clks 15>;
+				sirf,uart-dma-rx-channel = <6>;
+				sirf,uart-dma-tx-channel = <7>;
 			};
 
 			usp0: usp@b0080000 {
@@ -222,7 +230,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb0080000 0x10000>;
 				interrupts = <20>;
+				fifosize = <128>;
 				clocks = <&clks 28>;
+				sirf,usp-dma-rx-channel = <17>;
+				sirf,usp-dma-tx-channel = <18>;
 			};
 
 			usp1: usp@b0090000 {
@@ -230,7 +241,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb0090000 0x10000>;
 				interrupts = <21>;
+				fifosize = <128>;
 				clocks = <&clks 29>;
+				sirf,usp-dma-rx-channel = <14>;
+				sirf,usp-dma-tx-channel = <15>;
 			};
 
 			usp2: usp@b00a0000 {
@@ -238,7 +252,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb00a0000 0x10000>;
 				interrupts = <22>;
+				fifosize = <128>;
 				clocks = <&clks 30>;
+				sirf,usp-dma-rx-channel = <10>;
+				sirf,usp-dma-tx-channel = <11>;
 			};
 
 			dmac0: dma-controller@b00b0000 {
@@ -261,6 +278,8 @@
 				compatible = "sirf,prima2-vip";
 				reg = <0xb00C0000 0x10000>;
 				clocks = <&clks 31>;
+				interrupts = <14>;
+				sirf,vip-dma-rx-channel = <16>;
 			};
 
 			spi0: spi@b00d0000 {

arch/arm/boot/dts/r8a73a4.dtsi

@@ -193,7 +193,7 @@
 	};
 
 	sdhi0: sdhi@ee100000 {
-		compatible = "renesas,r8a73a4-sdhi";
+		compatible = "renesas,sdhi-r8a73a4";
 		reg = <0 0xee100000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 165 4>;
@@ -202,7 +202,7 @@
 	};
 
 	sdhi1: sdhi@ee120000 {
-		compatible = "renesas,r8a73a4-sdhi";
+		compatible = "renesas,sdhi-r8a73a4";
 		reg = <0 0xee120000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 166 4>;
@@ -211,7 +211,7 @@
 	};
 
 	sdhi2: sdhi@ee140000 {
-		compatible = "renesas,r8a73a4-sdhi";
+		compatible = "renesas,sdhi-r8a73a4";
 		reg = <0 0xee140000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 167 4>;

arch/arm/boot/dts/r8a7778.dtsi

@@ -96,6 +96,5 @@
 	pfc: pfc@fffc0000 {
 		compatible = "renesas,pfc-r8a7778";
 		reg = <0xfffc000 0x118>;
-		#gpio-range-cells = <3>;
 	};
 };

arch/arm/boot/dts/r8a7779.dtsi

@@ -188,7 +188,6 @@
 	pfc: pfc@fffc0000 {
 		compatible = "renesas,pfc-r8a7779";
 		reg = <0xfffc0000 0x23c>;
-		#gpio-range-cells = <3>;
 	};
 
 	thermal@ffc48000 {

arch/arm/boot/dts/r8a7790.dtsi

@@ -148,11 +148,10 @@
 	pfc: pfc@e6060000 {
 		compatible = "renesas,pfc-r8a7790";
 		reg = <0 0xe6060000 0 0x250>;
-		#gpio-range-cells = <3>;
 	};
 
 	sdhi0: sdhi@ee100000 {
-		compatible = "renesas,r8a7790-sdhi";
+		compatible = "renesas,sdhi-r8a7790";
 		reg = <0 0xee100000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 165 4>;
@@ -161,7 +160,7 @@
 	};
 
 	sdhi1: sdhi@ee120000 {
-		compatible = "renesas,r8a7790-sdhi";
+		compatible = "renesas,sdhi-r8a7790";
 		reg = <0 0xee120000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 166 4>;
@@ -170,7 +169,7 @@
 	};
 
 	sdhi2: sdhi@ee140000 {
-		compatible = "renesas,r8a7790-sdhi";
+		compatible = "renesas,sdhi-r8a7790";
 		reg = <0 0xee140000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 167 4>;
@@ -179,7 +178,7 @@
 	};
 
 	sdhi3: sdhi@ee160000 {
-		compatible = "renesas,r8a7790-sdhi";
+		compatible = "renesas,sdhi-r8a7790";
 		reg = <0 0xee160000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 168 4>;

arch/arm/boot/dts/sh73a0.dtsi

@@ -196,7 +196,7 @@
 	};
 
 	sdhi0: sdhi@ee100000 {
-		compatible = "renesas,r8a7740-sdhi";
+		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xee100000 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 83 4
@@ -208,7 +208,7 @@
 
 	/* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */
 	sdhi1: sdhi@ee120000 {
-		compatible = "renesas,r8a7740-sdhi";
+		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xee120000 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 88 4
@@ -219,7 +219,7 @@
 	};
 
 	sdhi2: sdhi@ee140000 {
-		compatible = "renesas,r8a7740-sdhi";
+		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xee140000 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 104 4

arch/arm/boot/install.sh

@@ -20,6 +20,20 @@
 #   $4 - default install path (blank if root directory)
 #
 
+verify () {
+	if [ ! -f "$1" ]; then
+		echo ""                                                   1>&2
+		echo " *** Missing file: $1"                              1>&2
+		echo ' *** You need to run "make" before "make install".' 1>&2
+		echo ""                                                   1>&2
+		exit 1
+	fi
+}
+
+# Make sure the files actually exist
+verify "$2"
+verify "$3"
+
 # User may have a custom install script
 if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
 if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi

arch/arm/common/edma.c

@@ -269,6 +269,11 @@ static const struct edmacc_param dummy_paramset = {
 	.ccnt = 1,
 };
 
+static const struct of_device_id edma_of_ids[] = {
+	{ .compatible = "ti,edma3", },
+	{}
+};
+
 /*****************************************************************************/
 
 static void map_dmach_queue(unsigned ctlr, unsigned ch_no,
@@ -560,14 +565,38 @@ static int reserve_contiguous_slots(int ctlr, unsigned int id,
 static int prepare_unused_channel_list(struct device *dev, void *data)
 {
 	struct platform_device *pdev = to_platform_device(dev);
-	int i, ctlr;
+	int i, count, ctlr;
+	struct of_phandle_args  dma_spec;
 
+	if (dev->of_node) {
+		count = of_property_count_strings(dev->of_node, "dma-names");
+		if (count < 0)
+			return 0;
+		for (i = 0; i < count; i++) {
+			if (of_parse_phandle_with_args(dev->of_node, "dmas",
+						       "#dma-cells", i,
+						       &dma_spec))
+				continue;
+
+			if (!of_match_node(edma_of_ids, dma_spec.np)) {
+				of_node_put(dma_spec.np);
+				continue;
+			}
+
+			clear_bit(EDMA_CHAN_SLOT(dma_spec.args[0]),
+				  edma_cc[0]->edma_unused);
+			of_node_put(dma_spec.np);
+		}
+		return 0;
+	}
+
+	/* For non-OF case */
 	for (i = 0; i < pdev->num_resources; i++) {
 		if ((pdev->resource[i].flags & IORESOURCE_DMA) &&
 				(int)pdev->resource[i].start >= 0) {
 			ctlr = EDMA_CTLR(pdev->resource[i].start);
 			clear_bit(EDMA_CHAN_SLOT(pdev->resource[i].start),
-					edma_cc[ctlr]->edma_unused);
+				  edma_cc[ctlr]->edma_unused);
 		}
 	}
 
@@ -1762,11 +1791,6 @@ static int edma_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id edma_of_ids[] = {
-	{ .compatible = "ti,edma3", },
-	{}
-};
-
 static struct platform_driver edma_driver = {
 	.driver = {
 		.name	= "edma",

arch/arm/common/mcpm_entry.c

@@ -51,7 +51,8 @@ void mcpm_cpu_power_down(void)
 {
 	phys_reset_t phys_reset;
 
-	BUG_ON(!platform_ops);
+	if (WARN_ON_ONCE(!platform_ops || !platform_ops->power_down))
+		return;
 	BUG_ON(!irqs_disabled());
 
 	/*
@@ -93,7 +94,8 @@ void mcpm_cpu_suspend(u64 expected_residency)
 {
 	phys_reset_t phys_reset;
 
-	BUG_ON(!platform_ops);
+	if (WARN_ON_ONCE(!platform_ops || !platform_ops->suspend))
+		return;
 	BUG_ON(!irqs_disabled());
 
 	/* Very similar to mcpm_cpu_power_down() */

arch/arm/common/sharpsl_param.c

@@ -15,6 +15,7 @@
 #include <linux/module.h>
 #include <linux/string.h>
 #include <asm/mach/sharpsl_param.h>
+#include <asm/memory.h>
 
 /*
  * Certain hardware parameters determined at the time of device manufacture,
@@ -25,8 +26,10 @@
  */
 #ifdef CONFIG_ARCH_SA1100
 #define PARAM_BASE	0xe8ffc000
+#define param_start(x)	(void *)(x)
 #else
 #define PARAM_BASE	0xa0000a00
+#define param_start(x)	__va(x)
 #endif
 #define MAGIC_CHG(a,b,c,d) ( ( d << 24 ) | ( c << 16 )  | ( b << 8 ) | a )
 
@@ -41,7 +44,7 @@ EXPORT_SYMBOL(sharpsl_param);
 
 void sharpsl_save_param(void)
 {
-	memcpy(&sharpsl_param, (void *)PARAM_BASE, sizeof(struct sharpsl_param_info));
+	memcpy(&sharpsl_param, param_start(PARAM_BASE), sizeof(struct sharpsl_param_info));
 
 	if (sharpsl_param.comadj_keyword != COMADJ_MAGIC)
 		sharpsl_param.comadj=-1;

arch/arm/configs/multi_v7_defconfig

@@ -135,6 +135,7 @@ CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
 CONFIG_MMC_SDHCI_TEGRA=y
 CONFIG_MMC_SDHCI_SPEAR=y
 CONFIG_MMC_OMAP=y

arch/arm/crypto/aes-armv4.S

@@ -148,7 +148,7 @@ AES_Te:
 @ 		 const AES_KEY *key) {
 .align	5
 ENTRY(AES_encrypt)
-	sub	r3,pc,#8		@ AES_encrypt
+	adr	r3,AES_encrypt
 	stmdb   sp!,{r1,r4-r12,lr}
 	mov	r12,r0		@ inp
 	mov	r11,r2
@@ -381,7 +381,7 @@ _armv4_AES_encrypt:
 .align	5
 ENTRY(private_AES_set_encrypt_key)
 _armv4_AES_set_encrypt_key:
-	sub	r3,pc,#8		@ AES_set_encrypt_key
+	adr	r3,_armv4_AES_set_encrypt_key
 	teq	r0,#0
 	moveq	r0,#-1
 	beq	.Labrt
@@ -843,7 +843,7 @@ AES_Td:
 @ 		 const AES_KEY *key) {
 .align	5
 ENTRY(AES_decrypt)
-	sub	r3,pc,#8		@ AES_decrypt
+	adr	r3,AES_decrypt
 	stmdb   sp!,{r1,r4-r12,lr}
 	mov	r12,r0		@ inp
 	mov	r11,r2

arch/arm/include/asm/Kbuild

@@ -31,5 +31,4 @@ generic-y += termbits.h
 generic-y += termios.h
 generic-y += timex.h
 generic-y += trace_clock.h
-generic-y += types.h
 generic-y += unaligned.h

arch/arm/include/asm/jump_label.h

@@ -16,7 +16,7 @@
 
 static __always_inline bool arch_static_branch(struct static_key *key)
 {
-	asm goto("1:\n\t"
+	asm_volatile_goto("1:\n\t"
 		 JUMP_LABEL_NOP "\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
 		 ".word 1b, %l[l_yes], %c0\n\t"

arch/arm/include/asm/mcpm.h

@@ -76,8 +76,11 @@ int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster);
  *
  * This must be called with interrupts disabled.
  *
- * This does not return.  Re-entry in the kernel is expected via
- * mcpm_entry_point.
+ * On success this does not return.  Re-entry in the kernel is expected
+ * via mcpm_entry_point.
+ *
+ * This will return if mcpm_platform_register() has not been called
+ * previously in which case the caller should take appropriate action.
  */
 void mcpm_cpu_power_down(void);
 
@@ -98,8 +101,11 @@ void mcpm_cpu_power_down(void);
  *
  * This must be called with interrupts disabled.
  *
- * This does not return.  Re-entry in the kernel is expected via
- * mcpm_entry_point.
+ * On success this does not return.  Re-entry in the kernel is expected
+ * via mcpm_entry_point.
+ *
+ * This will return if mcpm_platform_register() has not been called
+ * previously in which case the caller should take appropriate action.
  */
 void mcpm_cpu_suspend(u64 expected_residency);
 

arch/arm/include/asm/syscall.h

@@ -57,6 +57,9 @@ static inline void syscall_get_arguments(struct task_struct *task,
 					 unsigned int i, unsigned int n,
 					 unsigned long *args)
 {
+	if (n == 0)
+		return;
+
 	if (i + n > SYSCALL_MAX_ARGS) {
 		unsigned long *args_bad = args + SYSCALL_MAX_ARGS - i;
 		unsigned int n_bad = n + i - SYSCALL_MAX_ARGS;
@@ -81,6 +84,9 @@ static inline void syscall_set_arguments(struct task_struct *task,
 					 unsigned int i, unsigned int n,
 					 const unsigned long *args)
 {
+	if (n == 0)
+		return;
+
 	if (i + n > SYSCALL_MAX_ARGS) {
 		pr_warning("%s called with max args %d, handling only %d\n",
 			   __func__, i + n, SYSCALL_MAX_ARGS);

arch/arm/include/asm/uaccess.h

@@ -19,6 +19,13 @@
 #include <asm/unified.h>
 #include <asm/compiler.h>
 
+#if __LINUX_ARM_ARCH__ < 6
+#include <asm-generic/uaccess-unaligned.h>
+#else
+#define __get_user_unaligned __get_user
+#define __put_user_unaligned __put_user
+#endif
+
 #define VERIFY_READ 0
 #define VERIFY_WRITE 1
 

arch/arm/kernel/entry-common.S

@@ -442,10 +442,10 @@ local_restart:
 	ldrcc	pc, [tbl, scno, lsl #2]		@ call sys_* routine
 
 	add	r1, sp, #S_OFF
-	cmp	scno, #(__ARM_NR_BASE - __NR_SYSCALL_BASE)
+2:	cmp	scno, #(__ARM_NR_BASE - __NR_SYSCALL_BASE)
 	eor	r0, scno, #__NR_SYSCALL_BASE	@ put OS number back
 	bcs	arm_syscall
-2:	mov	why, #0				@ no longer a real syscall
+	mov	why, #0				@ no longer a real syscall
 	b	sys_ni_syscall			@ not private func
 
 #if defined(CONFIG_OABI_COMPAT) || !defined(CONFIG_AEABI)

arch/arm/kernel/entry-header.S

@@ -329,10 +329,10 @@
 #ifdef CONFIG_CONTEXT_TRACKING
 	.if	\save
 	stmdb   sp!, {r0-r3, ip, lr}
-	bl	user_exit
+	bl	context_tracking_user_exit
 	ldmia	sp!, {r0-r3, ip, lr}
 	.else
-	bl	user_exit
+	bl	context_tracking_user_exit
 	.endif
 #endif
 	.endm
@@ -341,10 +341,10 @@
 #ifdef CONFIG_CONTEXT_TRACKING
 	.if	\save
 	stmdb   sp!, {r0-r3, ip, lr}
-	bl	user_enter
+	bl	context_tracking_user_enter
 	ldmia	sp!, {r0-r3, ip, lr}
 	.else
-	bl	user_enter
+	bl	context_tracking_user_enter
 	.endif
 #endif
 	.endm

arch/arm/kernel/head.S

@@ -487,7 +487,26 @@ __fixup_smp:
 	mrc	p15, 0, r0, c0, c0, 5	@ read MPIDR
 	and	r0, r0, #0xc0000000	@ multiprocessing extensions and
 	teq	r0, #0x80000000		@ not part of a uniprocessor system?
-	moveq	pc, lr			@ yes, assume SMP
+	bne    __fixup_smp_on_up	@ no, assume UP
+
+	@ Core indicates it is SMP. Check for Aegis SOC where a single
+	@ Cortex-A9 CPU is present but SMP operations fault.
+	mov	r4, #0x41000000
+	orr	r4, r4, #0x0000c000
+	orr	r4, r4, #0x00000090
+	teq	r3, r4			@ Check for ARM Cortex-A9
+	movne	pc, lr			@ Not ARM Cortex-A9,
+
+	@ If a future SoC *does* use 0x0 as the PERIPH_BASE, then the
+	@ below address check will need to be #ifdef'd or equivalent
+	@ for the Aegis platform.
+	mrc	p15, 4, r0, c15, c0	@ get SCU base address
+	teq	r0, #0x0		@ '0' on actual UP A9 hardware
+	beq	__fixup_smp_on_up	@ So its an A9 UP
+	ldr	r0, [r0, #4]		@ read SCU Config
+	and	r0, r0, #0x3		@ number of CPUs
+	teq	r0, #0x0		@ is 1?
+	movne	pc, lr
 
 __fixup_smp_on_up:
 	adr	r0, 1f

arch/arm/kvm/reset.c

@@ -58,7 +58,7 @@ static const struct kvm_irq_level cortexa_vtimer_irq = {
  */
 int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 {
-	struct kvm_regs *cpu_reset;
+	struct kvm_regs *reset_regs;
 	const struct kvm_irq_level *cpu_vtimer_irq;
 
 	switch (vcpu->arch.target) {
@@ -66,7 +66,7 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 	case KVM_ARM_TARGET_CORTEX_A15:
 		if (vcpu->vcpu_id > cortexa_max_cpu_idx)
 			return -EINVAL;
-		cpu_reset = &cortexa_regs_reset;
+		reset_regs = &cortexa_regs_reset;
 		vcpu->arch.midr = read_cpuid_id();
 		cpu_vtimer_irq = &cortexa_vtimer_irq;
 		break;
@@ -75,7 +75,7 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 	}
 
 	/* Reset core registers */
-	memcpy(&vcpu->arch.regs, cpu_reset, sizeof(vcpu->arch.regs));
+	memcpy(&vcpu->arch.regs, reset_regs, sizeof(vcpu->arch.regs));
 
 	/* Reset CP15 registers */
 	kvm_reset_coprocs(vcpu);

arch/arm/mach-at91/at91rm9200_time.c

@@ -93,7 +93,7 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction at91rm9200_timer_irq = {
 	.name		= "at91_tick",
-	.flags		= IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= at91rm9200_timer_interrupt,
 	.irq		= NR_IRQS_LEGACY + AT91_ID_SYS,
 };

arch/arm/mach-at91/at91sam926x_time.c

@@ -171,7 +171,7 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
 
 static struct irqaction at91sam926x_pit_irq = {
 	.name		= "at91_tick",
-	.flags		= IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= at91sam926x_pit_interrupt,
 	.irq		= NR_IRQS_LEGACY + AT91_ID_SYS,
 };

arch/arm/mach-at91/at91sam9g45_reset.S

@@ -16,11 +16,17 @@
 #include "at91_rstc.h"
 			.arm
 
+/*
+ * at91_ramc_base is an array void*
+ * init at NULL if only one DDR controler is present in or DT
+ */
 			.globl	at91sam9g45_restart
 
 at91sam9g45_restart:
 			ldr	r5, =at91_ramc_base		@ preload constants
 			ldr	r0, [r5]
+			ldr	r5, [r5, #4]			@ ddr1
+			cmp	r5, #0
 			ldr	r4, =at91_rstc_base
 			ldr	r1, [r4]
 
@@ -30,6 +36,8 @@ at91sam9g45_restart:
 
 			.balign	32				@ align to cache line
 
+			strne	r2, [r5, #AT91_DDRSDRC_RTR]	@ disable DDR1 access
+			strne	r3, [r5, #AT91_DDRSDRC_LPR]	@ power down DDR1
 			str	r2, [r0, #AT91_DDRSDRC_RTR]	@ disable DDR0 access
 			str	r3, [r0, #AT91_DDRSDRC_LPR]	@ power down DDR0
 			str	r4, [r1, #AT91_RSTC_CR]		@ reset processor

arch/arm/mach-at91/at91x40_time.c

@@ -57,7 +57,7 @@ static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction at91x40_timer_irq = {
 	.name		= "at91_tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.flags		= IRQF_TIMER,
 	.handler	= at91x40_timer_interrupt
 };
 

arch/arm/mach-davinci/board-dm365-evm.c

@@ -176,7 +176,7 @@ static struct at24_platform_data eeprom_info = {
 	.context	= (void *)0x7f00,
 };
 
-static struct snd_platform_data dm365_evm_snd_data = {
+static struct snd_platform_data dm365_evm_snd_data __maybe_unused = {
 	.asp_chan_q = EVENTQ_3,
 };
 

arch/arm/mach-davinci/include/mach/serial.h

@@ -15,8 +15,6 @@
 
 #include <mach/hardware.h>
 
-#include <linux/platform_device.h>
-
 #define DAVINCI_UART0_BASE	(IO_PHYS + 0x20000)
 #define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)
 #define DAVINCI_UART2_BASE	(IO_PHYS + 0x20800)
@@ -39,6 +37,8 @@
 #define UART_DM646X_SCR_TX_WATERMARK	0x08
 
 #ifndef __ASSEMBLY__
+#include <linux/platform_device.h>
+
 extern int davinci_serial_init(struct platform_device *);
 #endif
 

arch/arm/mach-integrator/pci_v3.h

 /* Simple oneliner include to the PCIv3 early init */
+#ifdef CONFIG_PCI
 extern int pci_v3_early_init(void);
+#else
+static inline int pci_v3_early_init(void)
+{
+	return 0;
+}
+#endif

arch/arm/mach-mvebu/coherency.c

@@ -140,6 +140,7 @@ int __init coherency_init(void)
 		coherency_base = of_iomap(np, 0);
 		coherency_cpu_base = of_iomap(np, 1);
 		set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0);
+		of_node_put(np);
 	}
 
 	return 0;
@@ -147,9 +148,14 @@ int __init coherency_init(void)
 
 static int __init coherency_late_init(void)
 {
-	if (of_find_matching_node(NULL, of_coherency_table))
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, of_coherency_table);
+	if (np) {
 		bus_register_notifier(&platform_bus_type,
 				      &mvebu_hwcc_platform_nb);
+		of_node_put(np);
+	}
 	return 0;
 }
 

arch/arm/mach-mvebu/pmsu.c

@@ -67,6 +67,7 @@ int __init armada_370_xp_pmsu_init(void)
 		pr_info("Initializing Power Management Service Unit\n");
 		pmsu_mp_base = of_iomap(np, 0);
 		pmsu_reset_base = of_iomap(np, 1);
+		of_node_put(np);
 	}
 
 	return 0;

arch/arm/mach-mvebu/system-controller.c

@@ -98,6 +98,7 @@ static int __init mvebu_system_controller_init(void)
 		BUG_ON(!match);
 		system_controller_base = of_iomap(np, 0);
 		mvebu_sc = (struct mvebu_system_controller *)match->data;
+		of_node_put(np);
 	}
 
 	return 0;

arch/arm/mach-omap2/board-generic.c

@@ -129,6 +129,24 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
 	.restart	= omap3xxx_restart,
 MACHINE_END
 
+static const char *omap36xx_boards_compat[] __initdata = {
+	"ti,omap36xx",
+	NULL,
+};
+
+DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)")
+	.reserve	= omap_reserve,
+	.map_io		= omap3_map_io,
+	.init_early	= omap3630_init_early,
+	.init_irq	= omap_intc_of_init,
+	.handle_irq	= omap3_intc_handle_irq,
+	.init_machine	= omap_generic_init,
+	.init_late	= omap3_init_late,
+	.init_time	= omap3_sync32k_timer_init,
+	.dt_compat	= omap36xx_boards_compat,
+	.restart	= omap3xxx_restart,
+MACHINE_END
+
 static const char *omap3_gp_boards_compat[] __initdata = {
 	"ti,omap3-beagle",
 	"timll,omap3-devkit8000",

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -167,38 +167,47 @@ static struct lp55xx_led_config rx51_lp5523_led_config[] = {
 		.name		= "lp5523:kb1",
 		.chan_nr	= 0,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:kb2",
 		.chan_nr	= 1,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:kb3",
 		.chan_nr	= 2,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:kb4",
 		.chan_nr	= 3,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:b",
 		.chan_nr	= 4,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:g",
 		.chan_nr	= 5,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:r",
 		.chan_nr	= 6,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:kb5",
 		.chan_nr	= 7,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:kb6",
 		.chan_nr	= 8,
 		.led_current	= 50,
+		.max_current	= 100,
 	}
 };
 

arch/arm/mach-omap2/gpmc-onenand.c

@@ -272,9 +272,19 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base)
 	struct gpmc_timings t;
 	int ret;
 
-	if (gpmc_onenand_data->of_node)
+	if (gpmc_onenand_data->of_node) {
 		gpmc_read_settings_dt(gpmc_onenand_data->of_node,
 				      &onenand_async);
+		if (onenand_async.sync_read || onenand_async.sync_write) {
+			if (onenand_async.sync_write)
+				gpmc_onenand_data->flags |=
+					ONENAND_SYNC_READWRITE;
+			else
+				gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
+			onenand_async.sync_read = false;
+			onenand_async.sync_write = false;
+		}
+	}
 
 	omap2_onenand_set_async_mode(onenand_base);
 

arch/arm/mach-omap2/mux.h

@@ -28,7 +28,7 @@
 #define OMAP_PULL_UP			(1 << 4)
 #define OMAP_ALTELECTRICALSEL		(1 << 5)
 
-/* 34xx specific mux bit defines */
+/* omap3/4/5 specific mux bit defines */
 #define OMAP_INPUT_EN			(1 << 8)
 #define OMAP_OFF_EN			(1 << 9)
 #define OMAP_OFFOUT_EN			(1 << 10)
@@ -36,8 +36,6 @@
 #define OMAP_OFF_PULL_EN		(1 << 12)
 #define OMAP_OFF_PULL_UP		(1 << 13)
 #define OMAP_WAKEUP_EN			(1 << 14)
-
-/* 44xx specific mux bit defines */
 #define OMAP_WAKEUP_EVENT		(1 << 15)
 
 /* Active pin states */

arch/arm/mach-omap2/timer.c

@@ -628,7 +628,7 @@ void __init omap4_local_timer_init(void)
 #endif /* CONFIG_HAVE_ARM_TWD */
 #endif /* CONFIG_ARCH_OMAP4 */
 
-#ifdef CONFIG_SOC_OMAP5
+#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)
 void __init omap5_realtime_timer_init(void)
 {
 	omap4_sync32k_timer_init();
@@ -636,7 +636,7 @@ void __init omap5_realtime_timer_init(void)
 
 	clocksource_of_init();
 }
-#endif /* CONFIG_SOC_OMAP5 */
+#endif /* CONFIG_SOC_OMAP5 || CONFIG_SOC_DRA7XX */
 
 /**
  * omap_timer_init - build and register timer device with an

arch/arm/mach-shmobile/board-armadillo800eva.c

@@ -1108,9 +1108,9 @@ static const struct pinctrl_map eva_pinctrl_map[] = {
 	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-r8a7740",
 				  "fsib_mclk_in", "fsib"),
 	/* GETHER */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740",
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740",
 				  "gether_mii", "gether"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740",
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740",
 				  "gether_int", "gether"),
 	/* HDMI */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-r8a7740",

arch/arm/mach-shmobile/board-lager.c

@@ -29,6 +29,7 @@
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/gpio-rcar.h>
 #include <linux/platform_device.h>
+#include <linux/phy.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/sh_eth.h>
@@ -155,6 +156,30 @@ static void __init lager_add_standard_devices(void)
 					  &ether_pdata, sizeof(ether_pdata));
 }
 
+/*
+ * Ether LEDs on the Lager board are named LINK and ACTIVE which corresponds
+ * to non-default 01 setting of the Micrel KSZ8041 PHY control register 1 bits
+ * 14-15. We have to set them back to 01 from the default 00 value each time
+ * the PHY is reset. It's also important because the PHY's LED0 signal is
+ * connected to SoC's ETH_LINK signal and in the PHY's default mode it will
+ * bounce on and off after each packet, which we apparently want to avoid.
+ */
+static int lager_ksz8041_fixup(struct phy_device *phydev)
+{
+	u16 phyctrl1 = phy_read(phydev, 0x1e);
+
+	phyctrl1 &= ~0xc000;
+	phyctrl1 |= 0x4000;
+	return phy_write(phydev, 0x1e, phyctrl1);
+}
+
+static void __init lager_init(void)
+{
+	lager_add_standard_devices();
+
+	phy_register_fixup_for_id("r8a7790-ether-ff:01", lager_ksz8041_fixup);
+}
+
 static const char *lager_boards_compat_dt[] __initdata = {
 	"renesas,lager",
 	NULL,
@@ -163,6 +188,6 @@ static const char *lager_boards_compat_dt[] __initdata = {
 DT_MACHINE_START(LAGER_DT, "lager")
 	.init_early	= r8a7790_init_delay,
 	.init_time	= r8a7790_timer_init,
-	.init_machine	= lager_add_standard_devices,
+	.init_machine	= lager_init,
 	.dt_compat	= lager_boards_compat_dt,
 MACHINE_END

arch/arm/mach-vexpress/tc2_pm.c

@@ -131,6 +131,16 @@ static void tc2_pm_down(u64 residency)
 	} else
 		BUG();
 
+	/*
+	 * If the CPU is committed to power down, make sure
+	 * the power controller will be in charge of waking it
+	 * up upon IRQ, ie IRQ lines are cut from GIC CPU IF
+	 * to the CPU by disabling the GIC CPU IF to prevent wfi
+	 * from completing execution behind power controller back
+	 */
+	if (!skip_wfi)
+		gic_cpu_if_down();
+
 	if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
 		arch_spin_unlock(&tc2_pm_lock);
 
@@ -231,7 +241,6 @@ static void tc2_pm_suspend(u64 residency)
 	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
 	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
 	ve_spc_set_resume_addr(cluster, cpu, virt_to_phys(mcpm_entry_point));
-	gic_cpu_if_down();
 	tc2_pm_down(residency);
 }
 

arch/arm/mm/dma-mapping.c

@@ -1232,7 +1232,8 @@ __iommu_create_mapping(struct device *dev, struct page **pages, size_t size)
 				break;
 
 		len = (j - i) << PAGE_SHIFT;
-		ret = iommu_map(mapping->domain, iova, phys, len, 0);
+		ret = iommu_map(mapping->domain, iova, phys, len,
+				IOMMU_READ|IOMMU_WRITE);
 		if (ret < 0)
 			goto fail;
 		iova += len;
@@ -1431,6 +1432,27 @@ static int arm_iommu_get_sgtable(struct device *dev, struct sg_table *sgt,
 					 GFP_KERNEL);
 }
 
+static int __dma_direction_to_prot(enum dma_data_direction dir)
+{
+	int prot;
+
+	switch (dir) {
+	case DMA_BIDIRECTIONAL:
+		prot = IOMMU_READ | IOMMU_WRITE;
+		break;
+	case DMA_TO_DEVICE:
+		prot = IOMMU_READ;
+		break;
+	case DMA_FROM_DEVICE:
+		prot = IOMMU_WRITE;
+		break;
+	default:
+		prot = 0;
+	}
+
+	return prot;
+}
+
 /*
  * Map a part of the scatter-gather list into contiguous io address space
  */
@@ -1444,6 +1466,7 @@ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg,
 	int ret = 0;
 	unsigned int count;
 	struct scatterlist *s;
+	int prot;
 
 	size = PAGE_ALIGN(size);
 	*handle = DMA_ERROR_CODE;
@@ -1460,7 +1483,9 @@ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg,
 			!dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
 			__dma_page_cpu_to_dev(sg_page(s), s->offset, s->length, dir);
 
-		ret = iommu_map(mapping->domain, iova, phys, len, 0);
+		prot = __dma_direction_to_prot(dir);
+
+		ret = iommu_map(mapping->domain, iova, phys, len, prot);
 		if (ret < 0)
 			goto fail;
 		count += len >> PAGE_SHIFT;
@@ -1665,19 +1690,7 @@ static dma_addr_t arm_coherent_iommu_map_page(struct device *dev, struct page *p
 	if (dma_addr == DMA_ERROR_CODE)
 		return dma_addr;
 
-	switch (dir) {
-	case DMA_BIDIRECTIONAL:
-		prot = IOMMU_READ | IOMMU_WRITE;
-		break;
-	case DMA_TO_DEVICE:
-		prot = IOMMU_READ;
-		break;
-	case DMA_FROM_DEVICE:
-		prot = IOMMU_WRITE;
-		break;
-	default:
-		prot = 0;
-	}
+	prot = __dma_direction_to_prot(dir);
 
 	ret = iommu_map(mapping->domain, dma_addr, page_to_phys(page), len, prot);
 	if (ret < 0)

arch/arm/mm/init.c

@@ -17,7 +17,6 @@
 #include <linux/nodemask.h>
 #include <linux/initrd.h>
 #include <linux/of_fdt.h>
-#include <linux/of_reserved_mem.h>
 #include <linux/highmem.h>
 #include <linux/gfp.h>
 #include <linux/memblock.h>
@@ -379,8 +378,6 @@ void __init arm_memblock_init(struct meminfo *mi,
 	if (mdesc->reserve)
 		mdesc->reserve();
 
-	early_init_dt_scan_reserved_mem();
-
 	/*
 	 * reserve memory for DMA contigouos allocations,
 	 * must come from DMA area inside low memory

arch/arm64/Kconfig.debug

@@ -6,13 +6,6 @@ config FRAME_POINTER
 	bool
 	default y
 
-config DEBUG_STACK_USAGE
-	bool "Enable stack utilization instrumentation"
-	depends on DEBUG_KERNEL
-	help
-	  Enables the display of the minimum amount of free stack which each
-	  task has ever had available in the sysrq-T output.
-
 config EARLY_PRINTK
 	bool "Early printk support"
 	default y

arch/arm64/configs/defconfig

@@ -42,7 +42,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
-# CONFIG_BLK_DEV is not set
+CONFIG_BLK_DEV=y
 CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
@@ -72,6 +72,7 @@ CONFIG_LOGO=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_FUSE_FS=y
@@ -90,3 +91,5 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_FTRACE is not set
 CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_BLK=y

arch/arm64/include/asm/uaccess.h

@@ -166,9 +166,10 @@ do {									\
 
 #define get_user(x, ptr)						\
 ({									\
+	__typeof__(*(ptr)) __user *__p = (ptr);				\
 	might_fault();							\
-	access_ok(VERIFY_READ, (ptr), sizeof(*(ptr))) ?			\
-		__get_user((x), (ptr)) :				\
+	access_ok(VERIFY_READ, __p, sizeof(*__p)) ?			\
+		__get_user((x), __p) :					\
 		((x) = 0, -EFAULT);					\
 })
 
@@ -227,9 +228,10 @@ do {									\
 
 #define put_user(x, ptr)						\
 ({									\
+	__typeof__(*(ptr)) __user *__p = (ptr);				\
 	might_fault();							\
-	access_ok(VERIFY_WRITE, (ptr), sizeof(*(ptr))) ?		\
-		__put_user((x), (ptr)) :				\
+	access_ok(VERIFY_WRITE, __p, sizeof(*__p)) ?			\
+		__put_user((x), __p) :					\
 		-EFAULT;						\
 })
 

arch/arm64/kernel/fpsimd.c

@@ -80,8 +80,10 @@ void fpsimd_thread_switch(struct task_struct *next)
 
 void fpsimd_flush_thread(void)
 {
+	preempt_disable();
 	memset(&current->thread.fpsimd_state, 0, sizeof(struct fpsimd_state));
 	fpsimd_load_state(&current->thread.fpsimd_state);
+	preempt_enable();
 }
 
 #ifdef CONFIG_KERNEL_MODE_NEON

arch/arm64/mm/tlb.S

@@ -35,7 +35,7 @@
  */
 ENTRY(__cpu_flush_user_tlb_range)
 	vma_vm_mm x3, x2			// get vma->vm_mm
-	mmid	x3, x3				// get vm_mm->context.id
+	mmid	w3, x3				// get vm_mm->context.id
 	dsb	sy
 	lsr	x0, x0, #12			// align address
 	lsr	x1, x1, #12

arch/avr32/include/asm/Kbuild

 
 generic-y	+= clkdev.h
+generic-y       += cputime.h
+generic-y       += delay.h
+generic-y       += device.h
+generic-y       += div64.h
+generic-y       += emergency-restart.h
 generic-y	+= exec.h
-generic-y	+= trace_clock.h
+generic-y       += futex.h
+generic-y       += irq_regs.h
 generic-y	+= param.h
+generic-y       += local.h
+generic-y       += local64.h
+generic-y       += percpu.h
+generic-y       += scatterlist.h
+generic-y       += sections.h
+generic-y       += topology.h
+generic-y	+= trace_clock.h
+generic-y       += xor.h

arch/avr32/include/asm/cputime.h

-#ifndef __ASM_AVR32_CPUTIME_H
-#define __ASM_AVR32_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __ASM_AVR32_CPUTIME_H */

arch/avr32/include/asm/delay.h

-#include <asm-generic/delay.h>

arch/avr32/include/asm/device.h

-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-

arch/avr32/include/asm/div64.h

-#ifndef __ASM_AVR32_DIV64_H
-#define __ASM_AVR32_DIV64_H
-
-#include <asm-generic/div64.h>
-
-#endif /* __ASM_AVR32_DIV64_H */

arch/avr32/include/asm/emergency-restart.h

-#ifndef __ASM_AVR32_EMERGENCY_RESTART_H
-#define __ASM_AVR32_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* __ASM_AVR32_EMERGENCY_RESTART_H */

arch/avr32/include/asm/futex.h

-#ifndef __ASM_AVR32_FUTEX_H
-#define __ASM_AVR32_FUTEX_H
-
-#include <asm-generic/futex.h>
-
-#endif /* __ASM_AVR32_FUTEX_H */

arch/avr32/include/asm/irq_regs.h

-#include <asm-generic/irq_regs.h>

arch/avr32/include/asm/local.h

-#ifndef __ASM_AVR32_LOCAL_H
-#define __ASM_AVR32_LOCAL_H
-
-#include <asm-generic/local.h>
-
-#endif /* __ASM_AVR32_LOCAL_H */

arch/avr32/include/asm/local64.h

-#include <asm-generic/local64.h>

arch/avr32/include/asm/percpu.h

-#ifndef __ASM_AVR32_PERCPU_H
-#define __ASM_AVR32_PERCPU_H
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ASM_AVR32_PERCPU_H */

arch/avr32/include/asm/scatterlist.h

-#ifndef __ASM_AVR32_SCATTERLIST_H
-#define __ASM_AVR32_SCATTERLIST_H
-
-#include <asm-generic/scatterlist.h>
-
-#endif /* __ASM_AVR32_SCATTERLIST_H */

arch/avr32/include/asm/sections.h

-#ifndef __ASM_AVR32_SECTIONS_H
-#define __ASM_AVR32_SECTIONS_H
-
-#include <asm-generic/sections.h>
-
-#endif /* __ASM_AVR32_SECTIONS_H */

arch/avr32/include/asm/topology.h

-#ifndef __ASM_AVR32_TOPOLOGY_H
-#define __ASM_AVR32_TOPOLOGY_H
-
-#include <asm-generic/topology.h>
-
-#endif /* __ASM_AVR32_TOPOLOGY_H */

arch/avr32/include/asm/xor.h

-#ifndef _ASM_XOR_H
-#define _ASM_XOR_H
-
-#include <asm-generic/xor.h>
-
-#endif

arch/avr32/kernel/process.c

@@ -289,7 +289,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 		memset(childregs, 0, sizeof(struct pt_regs));
 		p->thread.cpu_context.r0 = arg;
 		p->thread.cpu_context.r1 = usp; /* fn */
-		p->thread.cpu_context.r2 = syscall_return;
+		p->thread.cpu_context.r2 = (unsigned long)syscall_return;
 		p->thread.cpu_context.pc = (unsigned long)ret_from_kernel_thread;
 		childregs->sr = MODE_SUPERVISOR;
 	} else {