提交 13775dac 编写于 作者: L Linus Torvalds

Merge tag 'for-4.20/libata-20181021' of git://git.kernel.dk/linux-block

Pull libata updates from Jens Axboe:
 "Here are the libata changes queued up for 4.20:

   - %pOFn device_node.name conversion (Rob Herring)

   - Use LBAM/LBAH password defines instead of hardcoding (Linus
     Walleij)

   - Series adding support for the allwinner R40 AHCI controller
     (Corentin Labbe)

   - Disable ALPM for Ampere Computing device (Suman Tripathi)

   - ahci bcrm fixes (Florian Fainelli)

   - Redundant Kconfig defaults (Bartlomiej Zolnierkiewicz)

   - Code cleanups (Nathan Chancellor)"

* tag 'for-4.20/libata-20181021' of git://git.kernel.dk/linux-block:
  ata: remove redundant 'default n' from Kconfig
  ata: ep93xx: Use proper enums for directions
  ata: ahci_brcm: Allow using driver or DSL SoCs
  ata: ahci_brcm: Match BCM63138 compatible strings
  ata: ahci_brcm: Allow optional reset controller to be used
  dt-bindings: ata: Document BCM63138 compatible string
  pata_atiixp: Remove unnecessary parentheses
  ata: Disable AHCI ALPM feature for Ampere Computing eMAG SATA
  dt-bindings: ata: update ahci_sunxi bindings
  ata: ahci_sunxi: add support for r40
  dt-bindings: ata: ahci-platform: document phy-supply
  ata: ahci_platform: add support for PHY controller regulator
  dt-bindings: ata: ahci-platform: document ahci-supply
  ata: ahci_platform: add support for AHCI controller regulator
  dt-bindings: ata: ahci-platform: fix indentation of target-supply
  libata: Use SMART LBAM/LBAH password defines
  ata: ahci: Convert to using %pOFn instead of device_node.name
......@@ -10,6 +10,7 @@ PHYs.
Required properties:
- compatible : compatible string, one of:
- "allwinner,sun4i-a10-ahci"
- "allwinner,sun8i-r40-ahci"
- "brcm,iproc-ahci"
- "hisilicon,hisi-ahci"
- "cavium,octeon-7130-ahci"
......@@ -31,8 +32,10 @@ Optional properties:
- clocks : a list of phandle + clock specifier pairs
- resets : a list of phandle + reset specifier pairs
- target-supply : regulator for SATA target power
- phy-supply : regulator for PHY power
- phys : reference to the SATA PHY node
- phy-names : must be "sata-phy"
- ahci-supply : regulator for AHCI controller
- ports-implemented : Mask that indicates which ports that the HBA supports
are available for software to use. Useful if PORTS_IMPL
is not programmed by the BIOS, which is true with
......@@ -42,12 +45,13 @@ Required properties when using sub-nodes:
- #address-cells : number of cells to encode an address
- #size-cells : number of cells representing the size of an address
For allwinner,sun8i-r40-ahci, the reset propertie must be present.
Sub-nodes required properties:
- reg : the port number
And at least one of the following properties:
- phys : reference to the SATA PHY node
- target-supply : regulator for SATA target power
- target-supply : regulator for SATA target power
Examples:
sata@ffe08000 {
......
......@@ -9,6 +9,7 @@ Required properties:
"brcm,bcm7445-ahci"
"brcm,bcm-nsp-ahci"
"brcm,sata3-ahci"
"brcm,bcm63138-ahci"
- reg : register mappings for AHCI and SATA_TOP_CTRL
- reg-names : "ahci" and "top-ctrl"
- interrupts : interrupt mapping for SATA IRQ
......
......@@ -33,7 +33,6 @@ if ATA
config ATA_NONSTANDARD
bool
default n
config ATA_VERBOSE_ERROR
bool "Verbose ATA error reporting"
......@@ -62,7 +61,6 @@ config ATA_ACPI
config SATA_ZPODD
bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
depends on ATA_ACPI && PM
default n
help
This option adds support for SATA Zero Power Optical Disc
Drive (ZPODD). It requires both the ODD and the platform
......@@ -121,7 +119,8 @@ config SATA_AHCI_PLATFORM
config AHCI_BRCM
tristate "Broadcom AHCI SATA support"
depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP
depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP || \
ARCH_BCM_63XX
help
This option enables support for the AHCI SATA3 controller found on
Broadcom SoC's.
......
......@@ -352,6 +352,8 @@ struct ahci_host_priv {
struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
struct reset_control *rsts; /* Optional */
struct regulator **target_pwrs; /* Optional */
struct regulator *ahci_regulator;/* Optional */
struct regulator *phy_regulator;/* Optional */
/*
* If platform uses PHYs. There is a 1:1 relation between the port number and
* the PHY position in this array.
......
......@@ -25,6 +25,7 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
#include <linux/string.h>
#include "ahci.h"
......@@ -94,6 +95,7 @@ struct brcm_ahci_priv {
u32 port_mask;
u32 quirks;
enum brcm_ahci_version version;
struct reset_control *rcdev;
};
static inline u32 brcm_sata_readreg(void __iomem *addr)
......@@ -381,6 +383,7 @@ static struct scsi_host_template ahci_platform_sht = {
static const struct of_device_id ahci_of_match[] = {
{.compatible = "brcm,bcm7425-ahci", .data = (void *)BRCM_SATA_BCM7425},
{.compatible = "brcm,bcm7445-ahci", .data = (void *)BRCM_SATA_BCM7445},
{.compatible = "brcm,bcm63138-ahci", .data = (void *)BRCM_SATA_BCM7445},
{.compatible = "brcm,bcm-nsp-ahci", .data = (void *)BRCM_SATA_NSP},
{},
};
......@@ -411,6 +414,11 @@ static int brcm_ahci_probe(struct platform_device *pdev)
if (IS_ERR(priv->top_ctrl))
return PTR_ERR(priv->top_ctrl);
/* Reset is optional depending on platform */
priv->rcdev = devm_reset_control_get(&pdev->dev, "ahci");
if (!IS_ERR_OR_NULL(priv->rcdev))
reset_control_deassert(priv->rcdev);
if ((priv->version == BRCM_SATA_BCM7425) ||
(priv->version == BRCM_SATA_NSP)) {
priv->quirks |= BRCM_AHCI_QUIRK_NO_NCQ;
......
......@@ -33,6 +33,13 @@ static const struct ata_port_info ahci_port_info = {
.port_ops = &ahci_platform_ops,
};
static const struct ata_port_info ahci_port_info_nolpm = {
.flags = AHCI_FLAG_COMMON | ATA_FLAG_NO_LPM,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_platform_ops,
};
static struct scsi_host_template ahci_platform_sht = {
AHCI_SHT(DRV_NAME),
};
......@@ -41,6 +48,7 @@ static int ahci_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct ahci_host_priv *hpriv;
const struct ata_port_info *port;
int rc;
hpriv = ahci_platform_get_resources(pdev,
......@@ -58,7 +66,11 @@ static int ahci_probe(struct platform_device *pdev)
if (of_device_is_compatible(dev->of_node, "hisilicon,hisi-ahci"))
hpriv->flags |= AHCI_HFLAG_NO_FBS | AHCI_HFLAG_NO_NCQ;
rc = ahci_platform_init_host(pdev, hpriv, &ahci_port_info,
port = acpi_device_get_match_data(dev);
if (!port)
port = &ahci_port_info;
rc = ahci_platform_init_host(pdev, hpriv, port,
&ahci_platform_sht);
if (rc)
goto disable_resources;
......@@ -85,6 +97,7 @@ static const struct of_device_id ahci_of_match[] = {
MODULE_DEVICE_TABLE(of, ahci_of_match);
static const struct acpi_device_id ahci_acpi_match[] = {
{ "APMC0D33", (unsigned long)&ahci_port_info_nolpm },
{ ACPI_DEVICE_CLASS(PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff) },
{},
};
......
......@@ -181,7 +181,7 @@ static int ahci_sunxi_probe(struct platform_device *pdev)
struct ahci_host_priv *hpriv;
int rc;
hpriv = ahci_platform_get_resources(pdev, 0);
hpriv = ahci_platform_get_resources(pdev, AHCI_PLATFORM_GET_RESETS);
if (IS_ERR(hpriv))
return PTR_ERR(hpriv);
......@@ -250,6 +250,7 @@ static SIMPLE_DEV_PM_OPS(ahci_sunxi_pm_ops, ahci_platform_suspend,
static const struct of_device_id ahci_sunxi_of_match[] = {
{ .compatible = "allwinner,sun4i-a10-ahci", },
{ .compatible = "allwinner,sun8i-r40-ahci", },
{ },
};
MODULE_DEVICE_TABLE(of, ahci_sunxi_of_match);
......
......@@ -139,7 +139,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
* ahci_platform_enable_regulators - Enable regulators
* @hpriv: host private area to store config values
*
* This function enables all the regulators found in
* This function enables all the regulators found in controller and
* hpriv->target_pwrs, if any. If a regulator fails to be enabled, it
* disables all the regulators already enabled in reverse order and
* returns an error.
......@@ -151,6 +151,18 @@ int ahci_platform_enable_regulators(struct ahci_host_priv *hpriv)
{
int rc, i;
if (hpriv->ahci_regulator) {
rc = regulator_enable(hpriv->ahci_regulator);
if (rc)
return rc;
}
if (hpriv->phy_regulator) {
rc = regulator_enable(hpriv->phy_regulator);
if (rc)
goto disable_ahci_pwrs;
}
for (i = 0; i < hpriv->nports; i++) {
if (!hpriv->target_pwrs[i])
continue;
......@@ -167,6 +179,11 @@ int ahci_platform_enable_regulators(struct ahci_host_priv *hpriv)
if (hpriv->target_pwrs[i])
regulator_disable(hpriv->target_pwrs[i]);
if (hpriv->phy_regulator)
regulator_disable(hpriv->phy_regulator);
disable_ahci_pwrs:
if (hpriv->ahci_regulator)
regulator_disable(hpriv->ahci_regulator);
return rc;
}
EXPORT_SYMBOL_GPL(ahci_platform_enable_regulators);
......@@ -175,7 +192,8 @@ EXPORT_SYMBOL_GPL(ahci_platform_enable_regulators);
* ahci_platform_disable_regulators - Disable regulators
* @hpriv: host private area to store config values
*
* This function disables all regulators found in hpriv->target_pwrs.
* This function disables all regulators found in hpriv->target_pwrs and
* AHCI controller.
*/
void ahci_platform_disable_regulators(struct ahci_host_priv *hpriv)
{
......@@ -186,6 +204,11 @@ void ahci_platform_disable_regulators(struct ahci_host_priv *hpriv)
continue;
regulator_disable(hpriv->target_pwrs[i]);
}
if (hpriv->ahci_regulator)
regulator_disable(hpriv->ahci_regulator);
if (hpriv->phy_regulator)
regulator_disable(hpriv->phy_regulator);
}
EXPORT_SYMBOL_GPL(ahci_platform_disable_regulators);
/**
......@@ -303,8 +326,8 @@ static int ahci_platform_get_phy(struct ahci_host_priv *hpriv, u32 port,
/* No PHY support. Check if PHY is required. */
if (of_find_property(node, "phys", NULL)) {
dev_err(dev,
"couldn't get PHY in node %s: ENOSYS\n",
node->name);
"couldn't get PHY in node %pOFn: ENOSYS\n",
node);
break;
}
/* fall through */
......@@ -316,8 +339,8 @@ static int ahci_platform_get_phy(struct ahci_host_priv *hpriv, u32 port,
default:
dev_err(dev,
"couldn't get PHY in node %s: %d\n",
node->name, rc);
"couldn't get PHY in node %pOFn: %d\n",
node, rc);
break;
}
......@@ -351,6 +374,7 @@ static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port,
*
* 1) mmio registers (IORESOURCE_MEM 0, mandatory)
* 2) regulator for controlling the targets power (optional)
* regulator for controlling the AHCI controller (optional)
* 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
* or for non devicetree enabled platforms a single clock
* 4) resets, if flags has AHCI_PLATFORM_GET_RESETS (optional)
......@@ -408,6 +432,24 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev,
hpriv->clks[i] = clk;
}
hpriv->ahci_regulator = devm_regulator_get_optional(dev, "ahci");
if (IS_ERR(hpriv->ahci_regulator)) {
rc = PTR_ERR(hpriv->ahci_regulator);
if (rc == -EPROBE_DEFER)
goto err_out;
rc = 0;
hpriv->ahci_regulator = NULL;
}
hpriv->phy_regulator = devm_regulator_get_optional(dev, "phy");
if (IS_ERR(hpriv->phy_regulator)) {
rc = PTR_ERR(hpriv->phy_regulator);
if (rc == -EPROBE_DEFER)
goto err_out;
rc = 0;
hpriv->phy_regulator = NULL;
}
if (flags & AHCI_PLATFORM_GET_RESETS) {
hpriv->rsts = devm_reset_control_array_get_optional_shared(dev);
if (IS_ERR(hpriv->rsts)) {
......
......@@ -639,8 +639,8 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg)
if (args[0] == ATA_CMD_SMART) { /* hack -- ide driver does this too */
scsi_cmd[6] = args[3];
scsi_cmd[8] = args[1];
scsi_cmd[10] = 0x4f;
scsi_cmd[12] = 0xc2;
scsi_cmd[10] = ATA_SMART_LBAM_PASS;
scsi_cmd[12] = ATA_SMART_LBAH_PASS;
} else {
scsi_cmd[6] = args[1];
}
......
......@@ -279,7 +279,7 @@ static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
const struct ata_port_info *ppi[] = { &info, &info };
/* SB600 doesn't have secondary port wired */
if((pdev->device == PCI_DEVICE_ID_ATI_IXP600_IDE))
if (pdev->device == PCI_DEVICE_ID_ATI_IXP600_IDE)
ppi[1] = &ata_dummy_port_info;
return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL,
......
......@@ -659,7 +659,7 @@ static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data)
* start of new transfer.
*/
drv_data->dma_rx_data.port = EP93XX_DMA_IDE;
drv_data->dma_rx_data.direction = DMA_FROM_DEVICE;
drv_data->dma_rx_data.direction = DMA_DEV_TO_MEM;
drv_data->dma_rx_data.name = "ep93xx-pata-rx";
drv_data->dma_rx_channel = dma_request_channel(mask,
ep93xx_pata_dma_filter, &drv_data->dma_rx_data);
......@@ -667,7 +667,7 @@ static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data)
return;
drv_data->dma_tx_data.port = EP93XX_DMA_IDE;
drv_data->dma_tx_data.direction = DMA_TO_DEVICE;
drv_data->dma_tx_data.direction = DMA_MEM_TO_DEV;
drv_data->dma_tx_data.name = "ep93xx-pata-tx";
drv_data->dma_tx_channel = dma_request_channel(mask,
ep93xx_pata_dma_filter, &drv_data->dma_tx_data);
......@@ -678,7 +678,7 @@ static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data)
/* Configure receive channel direction and source address */
memset(&conf, 0, sizeof(conf));
conf.direction = DMA_FROM_DEVICE;
conf.direction = DMA_DEV_TO_MEM;
conf.src_addr = drv_data->udma_in_phys;
conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
if (dmaengine_slave_config(drv_data->dma_rx_channel, &conf)) {
......@@ -689,7 +689,7 @@ static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data)
/* Configure transmit channel direction and destination address */
memset(&conf, 0, sizeof(conf));
conf.direction = DMA_TO_DEVICE;
conf.direction = DMA_MEM_TO_DEV;
conf.dst_addr = drv_data->udma_out_phys;
conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
if (dmaengine_slave_config(drv_data->dma_tx_channel, &conf)) {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册