提交 1341a00a 编写于 作者: L Linus Lüssing 提交者: Greg Kroah-Hartman

Staging: batman-adv: Make hop_penalty configurable via sysfs

When having a mixed topology of both very mobile and rather static
nodes, you are usually best advised to set the originator interval on
all nodes to a level best suited for the most mobile node.

However, if most of the nodes are rather static, this can create a lot
of undesired overhead as a trade-off then. If setting the interval too
low on the static nodes, a mobile node might be chosen as a router for
too long, not switching away from it fast enough because of its
mobility and the low frequency of ogms of static nodes.

Exposing the hop_penalty is especially useful for the stated scenario: A
static node can keep the default originator interval, a mobile node can
select a quicker one resulting in faster route updates towards this
mobile node. Additionally, such a mobile node could select a higher hop
penalty (or even set it to 255 to disable acting as a router for other
nodes) to make it less desirable, letting other nodes avoid selecting
this mobile node as a router.
Signed-off-by: NLinus Lüssing <linus.luessing@ascom.ch>
Signed-off-by: NSven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 1623948f
......@@ -254,6 +254,7 @@ BAT_ATTR_BOOL(bonding, S_IRUGO | S_IWUSR, NULL);
BAT_ATTR_BOOL(fragmentation, S_IRUGO | S_IWUSR, update_min_mtu);
static BAT_ATTR(vis_mode, S_IRUGO | S_IWUSR, show_vis_mode, store_vis_mode);
BAT_ATTR_UINT(orig_interval, S_IRUGO | S_IWUSR, 2 * JITTER, INT_MAX, NULL);
BAT_ATTR_UINT(hop_penalty, S_IRUGO | S_IWUSR, 0, TQ_MAX_VALUE, NULL);
#ifdef CONFIG_BATMAN_ADV_DEBUG
BAT_ATTR_UINT(log_level, S_IRUGO | S_IWUSR, 0, 3, NULL);
#endif
......@@ -264,6 +265,7 @@ static struct bat_attribute *mesh_attrs[] = {
&bat_attr_fragmentation,
&bat_attr_vis_mode,
&bat_attr_orig_interval,
&bat_attr_hop_penalty,
#ifdef CONFIG_BATMAN_ADV_DEBUG
&bat_attr_log_level,
#endif
......
......@@ -52,8 +52,6 @@
#define TQ_LOCAL_BIDRECT_RECV_MINIMUM 1
#define TQ_TOTAL_BIDRECT_LIMIT 1
#define TQ_HOP_PENALTY 10
#define NUM_WORDS (TQ_LOCAL_WINDOW_SIZE / WORD_BIT_SIZE)
#define PACKBUFF_SIZE 2000
......
......@@ -33,9 +33,10 @@
static void send_outstanding_bcast_packet(struct work_struct *work);
/* apply hop penalty for a normal link */
static uint8_t hop_penalty(const uint8_t tq)
static uint8_t hop_penalty(const uint8_t tq, struct bat_priv *bat_priv)
{
return (tq * (TQ_MAX_VALUE - TQ_HOP_PENALTY)) / (TQ_MAX_VALUE);
int hop_penalty = atomic_read(&bat_priv->hop_penalty);
return (tq * (TQ_MAX_VALUE - hop_penalty)) / (TQ_MAX_VALUE);
}
/* when do we schedule our own packet to be sent */
......@@ -330,7 +331,7 @@ void schedule_forward_packet(struct orig_node *orig_node,
}
/* apply hop penalty */
batman_packet->tq = hop_penalty(batman_packet->tq);
batman_packet->tq = hop_penalty(batman_packet->tq, bat_priv);
bat_dbg(DBG_BATMAN, bat_priv,
"Forwarding packet: tq_orig: %i, tq_avg: %i, "
......
......@@ -582,6 +582,7 @@ struct net_device *softif_create(char *name)
atomic_set(&bat_priv->bonding, 0);
atomic_set(&bat_priv->vis_mode, VIS_TYPE_CLIENT_UPDATE);
atomic_set(&bat_priv->orig_interval, 1000);
atomic_set(&bat_priv->hop_penalty, 10);
atomic_set(&bat_priv->log_level, 0);
atomic_set(&bat_priv->fragmentation, 1);
atomic_set(&bat_priv->bcast_queue_left, BCAST_QUEUE_LEN);
......
......@@ -29,6 +29,13 @@ Description:
Defines the interval in milliseconds in which batman
sends its protocol messages.
What: /sys/class/net/<mesh_iface>/mesh/hop_penalty
Date: Oct 2010
Contact: Linus Lüssing <linus.luessing@web.de>
Description:
Defines the penalty which will be applied to an
originator message's tq-field on every hop.
What: /sys/class/net/<mesh_iface>/mesh/vis_mode
Date: May 2010
Contact: Marek Lindner <lindner_marek@yahoo.de>
......
......@@ -118,6 +118,7 @@ struct bat_priv {
atomic_t fragmentation; /* boolean */
atomic_t vis_mode; /* VIS_TYPE_* */
atomic_t orig_interval; /* uint */
atomic_t hop_penalty; /* uint */
atomic_t log_level; /* uint */
atomic_t bcast_seqno;
atomic_t bcast_queue_left;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册