提交 132a324a 编写于 作者: M Marc Zyngier

KVM: arm64: vgic-v3: Add ICV_IAR1_EL1 handler

Add a handler for reading the guest's view of the ICC_IAR1_EL1
register. This involves finding the highest priority Group-1
interrupt, checking against both PMR and the active group
priority, activating the interrupt and setting the group
priority as active.
Tested-by: NAlexander Graf <agraf@suse.de>
Acked-by: NDavid Daney <david.daney@cavium.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>
上级 f8b630bc
...@@ -405,6 +405,7 @@ ...@@ -405,6 +405,7 @@
#define ICH_LR_PHYS_ID_SHIFT 32 #define ICH_LR_PHYS_ID_SHIFT 32
#define ICH_LR_PHYS_ID_MASK (0x3ffULL << ICH_LR_PHYS_ID_SHIFT) #define ICH_LR_PHYS_ID_MASK (0x3ffULL << ICH_LR_PHYS_ID_SHIFT)
#define ICH_LR_PRIORITY_SHIFT 48 #define ICH_LR_PRIORITY_SHIFT 48
#define ICH_LR_PRIORITY_MASK (0xffULL << ICH_LR_PRIORITY_SHIFT)
/* These are for GICv2 emulation only */ /* These are for GICv2 emulation only */
#define GICH_LR_VIRTUALID (0x3ffUL << 0) #define GICH_LR_VIRTUALID (0x3ffUL << 0)
......
...@@ -24,6 +24,7 @@ ...@@ -24,6 +24,7 @@
#define vtr_to_max_lr_idx(v) ((v) & 0xf) #define vtr_to_max_lr_idx(v) ((v) & 0xf)
#define vtr_to_nr_pre_bits(v) ((((u32)(v) >> 26) & 7) + 1) #define vtr_to_nr_pre_bits(v) ((((u32)(v) >> 26) & 7) + 1)
#define vtr_to_nr_apr_regs(v) (1 << (vtr_to_nr_pre_bits(v) - 5))
static u64 __hyp_text __gic_v3_get_lr(unsigned int lr) static u64 __hyp_text __gic_v3_get_lr(unsigned int lr)
{ {
...@@ -381,6 +382,88 @@ static int __hyp_text __vgic_v3_bpr_min(void) ...@@ -381,6 +382,88 @@ static int __hyp_text __vgic_v3_bpr_min(void)
return 8 - vtr_to_nr_pre_bits(read_gicreg(ICH_VTR_EL2)); return 8 - vtr_to_nr_pre_bits(read_gicreg(ICH_VTR_EL2));
} }
static int __hyp_text __vgic_v3_get_group(struct kvm_vcpu *vcpu)
{
u32 esr = kvm_vcpu_get_hsr(vcpu);
u8 crm = (esr & ESR_ELx_SYS64_ISS_CRM_MASK) >> ESR_ELx_SYS64_ISS_CRM_SHIFT;
return crm != 8;
}
#define GICv3_IDLE_PRIORITY 0xff
static int __hyp_text __vgic_v3_highest_priority_lr(struct kvm_vcpu *vcpu,
u32 vmcr,
u64 *lr_val)
{
unsigned int used_lrs = vcpu->arch.vgic_cpu.used_lrs;
u8 priority = GICv3_IDLE_PRIORITY;
int i, lr = -1;
for (i = 0; i < used_lrs; i++) {
u64 val = __gic_v3_get_lr(i);
u8 lr_prio = (val & ICH_LR_PRIORITY_MASK) >> ICH_LR_PRIORITY_SHIFT;
/* Not pending in the state? */
if ((val & ICH_LR_STATE) != ICH_LR_PENDING_BIT)
continue;
/* Group-0 interrupt, but Group-0 disabled? */
if (!(val & ICH_LR_GROUP) && !(vmcr & ICH_VMCR_ENG0_MASK))
continue;
/* Group-1 interrupt, but Group-1 disabled? */
if ((val & ICH_LR_GROUP) && !(vmcr & ICH_VMCR_ENG1_MASK))
continue;
/* Not the highest priority? */
if (lr_prio >= priority)
continue;
/* This is a candidate */
priority = lr_prio;
*lr_val = val;
lr = i;
}
if (lr == -1)
*lr_val = ICC_IAR1_EL1_SPURIOUS;
return lr;
}
static int __hyp_text __vgic_v3_get_highest_active_priority(void)
{
u8 nr_apr_regs = vtr_to_nr_apr_regs(read_gicreg(ICH_VTR_EL2));
u32 hap = 0;
int i;
for (i = 0; i < nr_apr_regs; i++) {
u32 val;
/*
* The ICH_AP0Rn_EL2 and ICH_AP1Rn_EL2 registers
* contain the active priority levels for this VCPU
* for the maximum number of supported priority
* levels, and we return the full priority level only
* if the BPR is programmed to its minimum, otherwise
* we return a combination of the priority level and
* subpriority, as determined by the setting of the
* BPR, but without the full subpriority.
*/
val = __vgic_v3_read_ap0rn(i);
val |= __vgic_v3_read_ap1rn(i);
if (!val) {
hap += 32;
continue;
}
return (hap + __ffs(val)) << __vgic_v3_bpr_min();
}
return GICv3_IDLE_PRIORITY;
}
static unsigned int __hyp_text __vgic_v3_get_bpr0(u32 vmcr) static unsigned int __hyp_text __vgic_v3_get_bpr0(u32 vmcr)
{ {
return (vmcr & ICH_VMCR_BPR0_MASK) >> ICH_VMCR_BPR0_SHIFT; return (vmcr & ICH_VMCR_BPR0_MASK) >> ICH_VMCR_BPR0_SHIFT;
...@@ -401,6 +484,83 @@ static unsigned int __hyp_text __vgic_v3_get_bpr1(u32 vmcr) ...@@ -401,6 +484,83 @@ static unsigned int __hyp_text __vgic_v3_get_bpr1(u32 vmcr)
return bpr; return bpr;
} }
/*
* Convert a priority to a preemption level, taking the relevant BPR
* into account by zeroing the sub-priority bits.
*/
static u8 __hyp_text __vgic_v3_pri_to_pre(u8 pri, u32 vmcr, int grp)
{
unsigned int bpr;
if (!grp)
bpr = __vgic_v3_get_bpr0(vmcr) + 1;
else
bpr = __vgic_v3_get_bpr1(vmcr);
return pri & (GENMASK(7, 0) << bpr);
}
/*
* The priority value is independent of any of the BPR values, so we
* normalize it using the minumal BPR value. This guarantees that no
* matter what the guest does with its BPR, we can always set/get the
* same value of a priority.
*/
static void __hyp_text __vgic_v3_set_active_priority(u8 pri, u32 vmcr, int grp)
{
u8 pre, ap;
u32 val;
int apr;
pre = __vgic_v3_pri_to_pre(pri, vmcr, grp);
ap = pre >> __vgic_v3_bpr_min();
apr = ap / 32;
if (!grp) {
val = __vgic_v3_read_ap0rn(apr);
__vgic_v3_write_ap0rn(val | BIT(ap % 32), apr);
} else {
val = __vgic_v3_read_ap1rn(apr);
__vgic_v3_write_ap1rn(val | BIT(ap % 32), apr);
}
}
static void __hyp_text __vgic_v3_read_iar(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
{
u64 lr_val;
u8 lr_prio, pmr;
int lr, grp;
grp = __vgic_v3_get_group(vcpu);
lr = __vgic_v3_highest_priority_lr(vcpu, vmcr, &lr_val);
if (lr < 0)
goto spurious;
if (grp != !!(lr_val & ICH_LR_GROUP))
goto spurious;
pmr = (vmcr & ICH_VMCR_PMR_MASK) >> ICH_VMCR_PMR_SHIFT;
lr_prio = (lr_val & ICH_LR_PRIORITY_MASK) >> ICH_LR_PRIORITY_SHIFT;
if (pmr <= lr_prio)
goto spurious;
if (__vgic_v3_get_highest_active_priority() <= __vgic_v3_pri_to_pre(lr_prio, vmcr, grp))
goto spurious;
lr_val &= ~ICH_LR_STATE;
/* No active state for LPIs */
if ((lr_val & ICH_LR_VIRTUAL_ID_MASK) <= VGIC_MAX_SPI)
lr_val |= ICH_LR_ACTIVE_BIT;
__gic_v3_set_lr(lr_val, lr);
__vgic_v3_set_active_priority(lr_prio, vmcr, grp);
vcpu_set_reg(vcpu, rt, lr_val & ICH_LR_VIRTUAL_ID_MASK);
return;
spurious:
vcpu_set_reg(vcpu, rt, ICC_IAR1_EL1_SPURIOUS);
}
static void __hyp_text __vgic_v3_read_igrpen1(struct kvm_vcpu *vcpu, u32 vmcr, int rt) static void __hyp_text __vgic_v3_read_igrpen1(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
{ {
vcpu_set_reg(vcpu, rt, !!(vmcr & ICH_VMCR_ENG1_MASK)); vcpu_set_reg(vcpu, rt, !!(vmcr & ICH_VMCR_ENG1_MASK));
...@@ -465,6 +625,9 @@ int __hyp_text __vgic_v3_perform_cpuif_access(struct kvm_vcpu *vcpu) ...@@ -465,6 +625,9 @@ int __hyp_text __vgic_v3_perform_cpuif_access(struct kvm_vcpu *vcpu)
is_read = (esr & ESR_ELx_SYS64_ISS_DIR_MASK) == ESR_ELx_SYS64_ISS_DIR_READ; is_read = (esr & ESR_ELx_SYS64_ISS_DIR_MASK) == ESR_ELx_SYS64_ISS_DIR_READ;
switch (sysreg) { switch (sysreg) {
case SYS_ICC_IAR1_EL1:
fn = __vgic_v3_read_iar;
break;
case SYS_ICC_GRPEN1_EL1: case SYS_ICC_GRPEN1_EL1:
if (is_read) if (is_read)
fn = __vgic_v3_read_igrpen1; fn = __vgic_v3_read_igrpen1;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册