Merge tag 'v3.10-rc1' into stable/for-linus-3.10

Linux 3.10-rc1

* tag 'v3.10-rc1': (12273 commits)
  Linux 3.10-rc1
  [SCSI] qla2xxx: Update firmware link in Kconfig file.
  [SCSI] iscsi class, qla4xxx: fix sess/conn refcounting when find fns are used
  [SCSI] sas: unify the pointlessly separated enums sas_dev_type and sas_device_type
  [SCSI] pm80xx: thermal, sas controller config and error handling update
  [SCSI] pm80xx: NCQ error handling changes
  [SCSI] pm80xx: WWN Modification for PM8081/88/89 controllers
  [SCSI] pm80xx: Changed module name and debug messages update
  [SCSI] pm80xx: Firmware flash memory free fix, with addition of new memory region for it
  [SCSI] pm80xx: SPC new firmware changes for device id 0x8081 alone
  [SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files
  [SCSI] pm80xx: MSI-X implementation for using 64 interrupts
  [SCSI] pm80xx: Updated common functions common for SPC and SPCv/ve
  [SCSI] pm80xx: Multiple inbound/outbound queue configuration
  [SCSI] pm80xx: Added SPCv/ve specific ids, variables and modify for SPC
  [SCSI] lpfc: fix up Kconfig dependencies
  [SCSI] Handle MLQUEUE busy response in scsi_send_eh_cmnd
  dm cache: set config value
  dm cache: move config fns
  dm thin: generate event when metadata threshold passed
  ...

CREDITS

@@ -761,6 +761,10 @@ S: Northampton
 S: NN1 3QT
 S: United Kingdom
 
+N: Massimo Dal Zotto
+E: dz@debian.org
+D: i8k Dell laptop SMM driver
+
 N: Uwe Dannowski
 E: Uwe.Dannowski@ira.uka.de
 W: http://i30www.ira.uka.de/~dannowsk/

Documentation/ABI/testing/sysfs-block-bcache

+What:		/sys/block/<disk>/bcache/unregister
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		A write to this file causes the backing device or cache to be
+		unregistered. If a backing device had dirty data in the cache,
+		writeback mode is automatically disabled and all dirty data is
+		flushed before the device is unregistered. Caches unregister
+		all associated backing devices before unregistering themselves.
+
+What:		/sys/block/<disk>/bcache/clear_stats
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		Writing to this file resets all the statistics for the device.
+
+What:		/sys/block/<disk>/bcache/cache
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a backing device that has cache, a symlink to
+		the bcache/ dir of that cache.
+
+What:		/sys/block/<disk>/bcache/cache_hits
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: integer number of full cache hits,
+		counted per bio. A partial cache hit counts as a miss.
+
+What:		/sys/block/<disk>/bcache/cache_misses
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: integer number of cache misses.
+
+What:		/sys/block/<disk>/bcache/cache_hit_ratio
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: cache hits as a percentage.
+
+What:		/sys/block/<disk>/bcache/sequential_cutoff
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: Threshold past which sequential IO will
+		skip the cache. Read and written as bytes in human readable
+		units (i.e. echo 10M > sequntial_cutoff).
+
+What:		/sys/block/<disk>/bcache/bypassed
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		Sum of all reads and writes that have bypassed the cache (due
+		to the sequential cutoff).  Expressed as bytes in human
+		readable units.
+
+What:		/sys/block/<disk>/bcache/writeback
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: When on, writeback caching is enabled and
+		writes will be buffered in the cache. When off, caching is in
+		writethrough mode; reads and writes will be added to the
+		cache but no write buffering will take place.
+
+What:		/sys/block/<disk>/bcache/writeback_running
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: when off, dirty data will not be written
+		from the cache to the backing device. The cache will still be
+		used to buffer writes until it is mostly full, at which point
+		writes transparently revert to writethrough mode. Intended only
+		for benchmarking/testing.
+
+What:		/sys/block/<disk>/bcache/writeback_delay
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: In writeback mode, when dirty data is
+		written to the cache and the cache held no dirty data for that
+		backing device, writeback from cache to backing device starts
+		after this delay, expressed as an integer number of seconds.
+
+What:		/sys/block/<disk>/bcache/writeback_percent
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: If nonzero, writeback from cache to
+		backing device only takes place when more than this percentage
+		of the cache is used, allowing more write coalescing to take
+		place and reducing total number of writes sent to the backing
+		device. Integer between 0 and 40.
+
+What:		/sys/block/<disk>/bcache/synchronous
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a cache, a boolean that allows synchronous mode to be
+		switched on and off. In synchronous mode all writes are ordered
+		such that the cache can reliably recover from unclean shutdown;
+		if disabled bcache will not generally wait for writes to
+		complete but if the cache is not shut down cleanly all data
+		will be discarded from the cache. Should not be turned off with
+		writeback caching enabled.
+
+What:		/sys/block/<disk>/bcache/discard
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a cache, a boolean allowing discard/TRIM to be turned off
+		or back on if the device supports it.
+
+What:		/sys/block/<disk>/bcache/bucket_size
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a cache, bucket size in human readable units, as set at
+		cache creation time; should match the erase block size of the
+		SSD for optimal performance.
+
+What:		/sys/block/<disk>/bcache/nbuckets
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a cache, the number of usable buckets.
+
+What:		/sys/block/<disk>/bcache/tree_depth
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a cache, height of the btree excluding leaf nodes (i.e. a
+		one node tree will have a depth of 0).
+
+What:		/sys/block/<disk>/bcache/btree_cache_size
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		Number of btree buckets/nodes that are currently cached in
+		memory; cache dynamically grows and shrinks in response to
+		memory pressure from the rest of the system.
+
+What:		/sys/block/<disk>/bcache/written
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a cache, total amount of data in human readable units
+		written to the cache, excluding all metadata.
+
+What:		/sys/block/<disk>/bcache/btree_written
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a cache, sum of all btree writes in human readable units.

Documentation/ABI/testing/sysfs-bus-mei

+What:		/sys/bus/mei/devices/.../modalias
+Date:		March 2013
+KernelVersion:	3.10
+Contact:	Samuel Ortiz <sameo@linux.intel.com>
+		linux-mei@linux.intel.com
+Description:	Stores the same MODALIAS value emitted by uevent
+		Format: mei:<mei device name>

Documentation/ABI/testing/sysfs-bus-rbd

@@ -66,27 +66,7 @@ current_snap
 
 	The current snapshot for which the device is mapped.
 
-snap_*
-
-	A directory per each snapshot
-
 parent
 
 	Information identifying the pool, image, and snapshot id for
 	the parent image in a layered rbd image (format 2 only).
-
-Entries under /sys/bus/rbd/devices/<dev-id>/snap_<snap-name>
--------------------------------------------------------------
-
-snap_id
-
-	The rados internal snapshot id assigned for this snapshot
-
-snap_size
-
-	The size of the image when this snapshot was taken.
-
-snap_features
-
-	A hexadecimal encoding of the feature bits for this snapshot.
-

Documentation/ABI/testing/sysfs-bus-usb

@@ -32,7 +32,7 @@ Date:		January 2008
 KernelVersion:	2.6.25
 Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
 Description:
-		If CONFIG_PM and CONFIG_USB_SUSPEND are enabled, then this file
+		If CONFIG_PM_RUNTIME is enabled then this file
 		is present.  When read, it returns the total time (in msec)
 		that the USB device has been connected to the machine.  This
 		file is read-only.
@@ -45,7 +45,7 @@ Date:		January 2008
 KernelVersion:	2.6.25
 Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
 Description:
-		If CONFIG_PM and CONFIG_USB_SUSPEND are enabled, then this file
+		If CONFIG_PM_RUNTIME is enabled then this file
 		is present.  When read, it returns the total time (in msec)
 		that the USB device has been active, i.e. not in a suspended
 		state.  This file is read-only.
@@ -187,7 +187,7 @@ What:		/sys/bus/usb/devices/.../power/usb2_hardware_lpm
 Date:		September 2011
 Contact:	Andiry Xu <andiry.xu@amd.com>
 Description:
-		If CONFIG_USB_SUSPEND is set and a USB 2.0 lpm-capable device
+		If CONFIG_PM_RUNTIME is set and a USB 2.0 lpm-capable device
 		is plugged in to a xHCI host which support link PM, it will
 		perform a LPM test; if the test is passed and host supports
 		USB2 hardware LPM (xHCI 1.0 feature), USB2 hardware LPM will

Documentation/ABI/testing/sysfs-class-mtd

@@ -14,8 +14,7 @@ Description:
 		The /sys/class/mtd/mtd{0,1,2,3,...} directories correspond
 		to each /dev/mtdX character device.  These may represent
 		physical/simulated flash devices, partitions on a flash
-		device, or concatenated flash devices.  They exist regardless
-		of whether CONFIG_MTD_CHAR is actually enabled.
+		device, or concatenated flash devices.
 
 What:		/sys/class/mtd/mtdXro/
 Date:		April 2009
@@ -23,8 +22,7 @@ KernelVersion:	2.6.29
 Contact:	linux-mtd@lists.infradead.org
 Description:
 		These directories provide the corresponding read-only device
-		nodes for /sys/class/mtd/mtdX/ .  They are only created
-		(for the benefit of udev) if CONFIG_MTD_CHAR is enabled.
+		nodes for /sys/class/mtd/mtdX/ .
 
 What:		/sys/class/mtd/mtdX/dev
 Date:		April 2009

Documentation/ABI/testing/sysfs-class-net-mesh

@@ -67,6 +67,14 @@ Description:
                 Defines the penalty which will be applied to an
                 originator message's tq-field on every hop.
 
+What:           /sys/class/net/<mesh_iface>/mesh/network_coding
+Date:           Nov 2012
+Contact:        Martin Hundeboll <martin@hundeboll.net>
+Description:
+                Controls whether Network Coding (using some magic
+                to send fewer wifi packets but still the same
+                content) is enabled or not.
+
 What:           /sys/class/net/<mesh_iface>/mesh/orig_interval
 Date:           May 2010
 Contact:        Marek Lindner <lindner_marek@yahoo.de>

Documentation/ABI/testing/sysfs-devices-lpss_ltr

+What:		/sys/devices/.../lpss_ltr/
+Date:		March 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../lpss_ltr/ directory is only present for
+		devices included into the Intel Lynxpoint Low Power Subsystem
+		(LPSS).  If present, it contains attributes containing the LTR
+		mode and the values of LTR registers of the device.
+
+What:		/sys/devices/.../lpss_ltr/ltr_mode
+Date:		March 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../lpss_ltr/ltr_mode attribute contains an
+		integer number (0 or 1) indicating whether or not the devices'
+		LTR functionality is working in the software mode (1).
+
+		This attribute is read-only.  If the device's runtime PM status
+		is not "active", attempts to read from this attribute cause
+		-EAGAIN to be returned.
+
+What:		/sys/devices/.../lpss_ltr/auto_ltr
+Date:		March 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../lpss_ltr/auto_ltr attribute contains the
+		current value of the device's AUTO_LTR register (raw)
+		represented as an 8-digit hexadecimal number.
+
+		This attribute is read-only.  If the device's runtime PM status
+		is not "active", attempts to read from this attribute cause
+		-EAGAIN to be returned.
+
+What:		/sys/devices/.../lpss_ltr/sw_ltr
+Date:		March 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../lpss_ltr/auto_ltr attribute contains the
+		current value of the device's SW_LTR register (raw) represented
+		as an 8-digit hexadecimal number.
+
+		This attribute is read-only.  If the device's runtime PM status
+		is not "active", attempts to read from this attribute cause
+		-EAGAIN to be returned.

Documentation/ABI/testing/sysfs-devices-power_resources_wakeup

+What:		/sys/devices/.../power_resources_wakeup/
+Date:		April 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_resources_wakeup/ directory is only
+		present for device objects representing ACPI device nodes that
+		require ACPI power resources for wakeup signaling.
+
+		If present, it contains symbolic links to device directories
+		representing ACPI power resources that need to be turned on for
+		the given device node to be able to signal wakeup.  The names of
+		the links are the same as the names of the directories they
+		point to.

Documentation/ABI/testing/sysfs-devices-system-cpu

@@ -173,3 +173,15 @@ Description:	Processor frequency boosting control
 		Boosting allows the CPU and the firmware to run at a frequency
 		beyound it's nominal limit.
 		More details can be found in Documentation/cpu-freq/boost.txt
+
+
+What:		/sys/devices/system/cpu/cpu#/crash_notes
+		/sys/devices/system/cpu/cpu#/crash_notes_size
+Date:		April 2013
+Contact:	kexec@lists.infradead.org
+Description:	address and size of the percpu note.
+
+		crash_notes: the physical address of the memory that holds the
+		note of cpu#.
+
+		crash_notes_size: size of the note of cpu#.

Documentation/ABI/testing/sysfs-driver-hid-roccat-isku

@@ -101,7 +101,8 @@ Date:		June 2011
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	When written, this file lets one set the backlight intensity for
 		a specific profile. Profile number is included in written data.
-		The data has to be 10 bytes long.
+		The data has to be 10 bytes long for Isku, IskuFX needs	16 bytes
+		of data.
 		Before reading this file, control has to be written to select
 		which profile to read.
 Users:		http://roccat.sourceforge.net
@@ -141,3 +142,12 @@ Description:	When written, this file lets one trigger easyshift functionality
 		The data has to be 16 bytes long.
 		This file is writeonly.
 Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/talkfx
+Date:		February 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one trigger temporary color schemes
+		from the host.
+		The data has to be 16 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net

Documentation/ABI/testing/sysfs-driver-hid-roccat-konepure

+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/actual_profile
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. actual_profile holds number of actual profile.
+		This value is persistent, so its value determines the profile
+		that's active when the mouse is powered on next time.
+		When written, the mouse activates the set profile immediately.
+		The data has to be 3 bytes long.
+		The mouse will reject invalid data.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/control
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one select which data from which
+		profile will be	read next. The data has to be 3 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/info
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns general data like firmware version.
+		When written, the device can be reset.
+		The data is 6 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/macro
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store a macro with max 500 key/button strokes
+		internally.
+		When written, this file lets one set the sequence for a specific
+		button for a specific profile. Button and profile numbers are
+		included in written data. The data has to be 2082 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/profile_buttons
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When written, this file lets one write the respective profile
+		buttons back to the mouse. The data has to be 59 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/profile_settings
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When written, this file lets one write the respective profile
+		settings back to the mouse. The data has to be 31 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/sensor
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse has a tracking- and a distance-control-unit. These
+		can be activated/deactivated and the lift-off distance can be
+		set. The data has to be 6 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/talk
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	Used to active some easy* functions of the mouse from outside.
+		The data has to be 16 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/tcu
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written a calibration process for the tracking control unit
+		can be initiated/cancelled. Also lets one read/write sensor
+		registers.
+		The data has to be 4 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/tcu_image
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read the mouse returns a 30x30 pixel image of the
+		sampled underground. This works only in the course of a
+		calibration process initiated with tcu.
+		The returned data is 1028 bytes in size.
+		This file is readonly.
+Users:		http://roccat.sourceforge.net

Documentation/ABI/testing/sysfs-firmware-acpi

@@ -18,6 +18,32 @@ Description:
 		yoffset: The number of pixels between the top of the screen
 			 and the top edge of the image.
 
+What:		/sys/firmware/acpi/hotplug/
+Date:		February 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		There are separate hotplug profiles for different classes of
+		devices supported by ACPI, such as containers, memory modules,
+		processors, PCI root bridges etc.  A hotplug profile for a given
+		class of devices is a collection of settings defining the way
+		that class of devices will be handled by the ACPI core hotplug
+		code.  Those profiles are represented in sysfs as subdirectories
+		of /sys/firmware/acpi/hotplug/.
+
+		The following setting is available to user space for each
+		hotplug profile:
+
+		enabled: If set, the ACPI core will handle notifications of
+			hotplug events associated with the given class of
+			devices and will allow those devices to be ejected with
+			the help of the _EJ0 control method.  Unsetting it
+			effectively disables hotplug for the correspoinding
+			class of devices.
+
+		The value of the above attribute is an integer number: 1 (set)
+		or 0 (unset).  Attempts to write any other values to it will
+		cause -EINVAL to be returned.
+
 What:		/sys/firmware/acpi/interrupts/
 Date:		February 2008
 Contact:	Len Brown <lenb@kernel.org>

Documentation/DocBook/80211.tmpl

@@ -437,7 +437,7 @@
       </section>
 !Finclude/net/mac80211.h ieee80211_get_buffered_bc
 !Finclude/net/mac80211.h ieee80211_beacon_get
-!Finclude/net/mac80211.h ieee80211_sta_eosp_irqsafe
+!Finclude/net/mac80211.h ieee80211_sta_eosp
 !Finclude/net/mac80211.h ieee80211_frame_release_type
 !Finclude/net/mac80211.h ieee80211_sta_ps_transition
 !Finclude/net/mac80211.h ieee80211_sta_ps_transition_ni

Documentation/DocBook/device-drivers.tmpl

@@ -227,7 +227,7 @@ X!Isound/sound_firmware.c
   <chapter id="uart16x50">
      <title>16x50 UART Driver</title>
 !Edrivers/tty/serial/serial_core.c
-!Edrivers/tty/serial/8250/8250.c
+!Edrivers/tty/serial/8250/8250_core.c
   </chapter>
 
   <chapter id="fbdev">

Documentation/DocBook/media/dvb/dvbproperty.xml

 <section id="FE_GET_SET_PROPERTY">
 <title><constant>FE_GET_PROPERTY/FE_SET_PROPERTY</constant></title>
-<para>This section describes the DVB version 5 extention of the DVB-API, also
+<para>This section describes the DVB version 5 extension of the DVB-API, also
 called "S2API", as this API were added to provide support for DVB-S2. It was
 designed to be able to replace the old frontend API. Yet, the DISEQC and
 the capability ioctls weren't implemented yet via the new way.</para>
@@ -903,14 +903,12 @@ enum fe_interleaving {
 			<constant>svalue</constant> is for signed values of the measure (dB measures)
 			and <constant>uvalue</constant> is for unsigned values (counters, relative scale)</para></listitem>
 		<listitem><para><constant>scale</constant> - Scale for the value. It can be:</para>
-			<section id = "fecap-scale-params">
-			<itemizedlist mark='bullet'>
+			<itemizedlist mark='bullet' id="fecap-scale-params">
 				<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - The parameter is supported by the frontend, but it was not possible to collect it (could be a transitory or permanent condition)</para></listitem>
 				<listitem><para><constant>FE_SCALE_DECIBEL</constant> - parameter is a signed value, measured in 1/1000 dB</para></listitem>
 				<listitem><para><constant>FE_SCALE_RELATIVE</constant> - parameter is a unsigned value, where 0 means 0% and 65535 means 100%.</para></listitem>
 				<listitem><para><constant>FE_SCALE_COUNTER</constant> - parameter is a unsigned value that counts the occurrence of an event, like bit error, block error, or lapsed time.</para></listitem>
 			</itemizedlist>
-			</section>
 		</listitem>
 	</itemizedlist>
 	<section id="DTV-STAT-SIGNAL-STRENGTH">
@@ -918,9 +916,9 @@ enum fe_interleaving {
 		<para>Indicates the signal strength level at the analog part of the tuner or of the demod.</para>
 		<para>Possible scales for this metric are:</para>
 		<itemizedlist mark='bullet'>
-			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
-			<listitem><constant>FE_SCALE_DECIBEL</constant> - signal strength is in 0.0001 dBm units, power measured in miliwatts. This value is generally negative.</listitem>
-			<listitem><constant>FE_SCALE_RELATIVE</constant> - The frontend provides a 0% to 100% measurement for power (actually, 0 to 65535).</listitem>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_DECIBEL</constant> - signal strength is in 0.0001 dBm units, power measured in miliwatts. This value is generally negative.</para></listitem>
+			<listitem><para><constant>FE_SCALE_RELATIVE</constant> - The frontend provides a 0% to 100% measurement for power (actually, 0 to 65535).</para></listitem>
 		</itemizedlist>
 	</section>
 	<section id="DTV-STAT-CNR">
@@ -928,9 +926,9 @@ enum fe_interleaving {
 		<para>Indicates the Signal to Noise ratio for the main carrier.</para>
 		<para>Possible scales for this metric are:</para>
 		<itemizedlist mark='bullet'>
-			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
-			<listitem><constant>FE_SCALE_DECIBEL</constant> - Signal/Noise ratio is in 0.0001 dB units.</listitem>
-			<listitem><constant>FE_SCALE_RELATIVE</constant> - The frontend provides a 0% to 100% measurement for Signal/Noise (actually, 0 to 65535).</listitem>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_DECIBEL</constant> - Signal/Noise ratio is in 0.0001 dB units.</para></listitem>
+			<listitem><para><constant>FE_SCALE_RELATIVE</constant> - The frontend provides a 0% to 100% measurement for Signal/Noise (actually, 0 to 65535).</para></listitem>
 		</itemizedlist>
 	</section>
 	<section id="DTV-STAT-PRE-ERROR-BIT-COUNT">
@@ -943,8 +941,8 @@ enum fe_interleaving {
 		      The frontend may reset it when a channel/transponder is tuned.</para>
 		<para>Possible scales for this metric are:</para>
 		<itemizedlist mark='bullet'>
-			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
-			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of error bits counted before the inner coding.</listitem>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of error bits counted before the inner coding.</para></listitem>
 		</itemizedlist>
 	</section>
 	<section id="DTV-STAT-PRE-TOTAL-BIT-COUNT">
@@ -952,14 +950,14 @@ enum fe_interleaving {
 		<para>Measures the amount of bits received before the inner code block, during the same period as
 		<link linkend="DTV-STAT-PRE-ERROR-BIT-COUNT"><constant>DTV_STAT_PRE_ERROR_BIT_COUNT</constant></link> measurement was taken.</para>
 		<para>It should be noticed that this measurement can be smaller than the total amount of bits on the transport stream,
-		      as the frontend may need to manually restart the measurement, loosing some data between each measurement interval.</para>
+		      as the frontend may need to manually restart the measurement, losing some data between each measurement interval.</para>
 		<para>This measurement is monotonically increased, as the frontend gets more bit count measurements.
 		      The frontend may reset it when a channel/transponder is tuned.</para>
 		<para>Possible scales for this metric are:</para>
 		<itemizedlist mark='bullet'>
-			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
-			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of bits counted while measuring
-				 <link linkend="DTV-STAT-PRE-ERROR-BIT-COUNT"><constant>DTV_STAT_PRE_ERROR_BIT_COUNT</constant></link>.</listitem>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of bits counted while measuring
+				 <link linkend="DTV-STAT-PRE-ERROR-BIT-COUNT"><constant>DTV_STAT_PRE_ERROR_BIT_COUNT</constant></link>.</para></listitem>
 		</itemizedlist>
 	</section>
 	<section id="DTV-STAT-POST-ERROR-BIT-COUNT">
@@ -972,8 +970,8 @@ enum fe_interleaving {
 		      The frontend may reset it when a channel/transponder is tuned.</para>
 		<para>Possible scales for this metric are:</para>
 		<itemizedlist mark='bullet'>
-			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
-			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of error bits counted after the inner coding.</listitem>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of error bits counted after the inner coding.</para></listitem>
 		</itemizedlist>
 	</section>
 	<section id="DTV-STAT-POST-TOTAL-BIT-COUNT">
@@ -981,14 +979,14 @@ enum fe_interleaving {
 		<para>Measures the amount of bits received after the inner coding, during the same period as
 		<link linkend="DTV-STAT-POST-ERROR-BIT-COUNT"><constant>DTV_STAT_POST_ERROR_BIT_COUNT</constant></link> measurement was taken.</para>
 		<para>It should be noticed that this measurement can be smaller than the total amount of bits on the transport stream,
-		      as the frontend may need to manually restart the measurement, loosing some data between each measurement interval.</para>
+		      as the frontend may need to manually restart the measurement, losing some data between each measurement interval.</para>
 		<para>This measurement is monotonically increased, as the frontend gets more bit count measurements.
 		      The frontend may reset it when a channel/transponder is tuned.</para>
 		<para>Possible scales for this metric are:</para>
 		<itemizedlist mark='bullet'>
-			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
-			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of bits counted while measuring
-				 <link linkend="DTV-STAT-POST-ERROR-BIT-COUNT"><constant>DTV_STAT_POST_ERROR_BIT_COUNT</constant></link>.</listitem>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of bits counted while measuring
+				 <link linkend="DTV-STAT-POST-ERROR-BIT-COUNT"><constant>DTV_STAT_POST_ERROR_BIT_COUNT</constant></link>.</para></listitem>
 		</itemizedlist>
 	</section>
 	<section id="DTV-STAT-ERROR-BLOCK-COUNT">
@@ -998,8 +996,8 @@ enum fe_interleaving {
 		      The frontend may reset it when a channel/transponder is tuned.</para>
 		<para>Possible scales for this metric are:</para>
 		<itemizedlist mark='bullet'>
-			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
-			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of error blocks counted after the outer coding.</listitem>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of error blocks counted after the outer coding.</para></listitem>
 		</itemizedlist>
 	</section>
 	<section id="DTV-STAT-TOTAL-BLOCK-COUNT">
@@ -1011,9 +1009,9 @@ enum fe_interleaving {
 		by <link linkend="DTV-STAT-TOTAL-BLOCK-COUNT"><constant>DTV-STAT-TOTAL-BLOCK-COUNT</constant></link>.</para>
 		<para>Possible scales for this metric are:</para>
 		<itemizedlist mark='bullet'>
-			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
-			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of blocks counted while measuring
-			<link linkend="DTV-STAT-ERROR-BLOCK-COUNT"><constant>DTV_STAT_ERROR_BLOCK_COUNT</constant></link>.</listitem>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of blocks counted while measuring
+			<link linkend="DTV-STAT-ERROR-BLOCK-COUNT"><constant>DTV_STAT_ERROR_BLOCK_COUNT</constant></link>.</para></listitem>
 		</itemizedlist>
 	</section>
 	</section>

Documentation/DocBook/media/v4l/common.xml

@@ -749,15 +749,6 @@ polarities, frontporch, backporch etc. The <filename>linux/v4l2-dv-timings.h</fi
 header can be used to get the timings of the formats in the <xref linkend="cea861" /> and
 <xref linkend="vesadmt" /> standards.
 	</para>
-	</listitem>
-	<listitem>
-	<para>DV Presets: Digital Video (DV) presets (<emphasis role="bold">deprecated</emphasis>).
-	These are IDs representing a
-video timing at the input/output. Presets are pre-defined timings implemented
-by the hardware according to video standards. A __u32 data type is used to represent
-a preset unlike the bit mask that is used in &v4l2-std-id; allowing future extensions
-to support as many different presets as needed. This API is deprecated in favor of the DV Timings
-API.</para>
 	</listitem>
 	</itemizedlist>
 	<para>To enumerate and query the attributes of the DV timings supported by a device,
@@ -766,11 +757,6 @@ API.</para>
 &VIDIOC-S-DV-TIMINGS; ioctl and to get current DV timings they use the
 &VIDIOC-G-DV-TIMINGS; ioctl. To detect the DV timings as seen by the video receiver applications
 use the &VIDIOC-QUERY-DV-TIMINGS; ioctl.</para>
-	<para>To enumerate and query the attributes of DV presets supported by a device,
-applications use the &VIDIOC-ENUM-DV-PRESETS; ioctl. To get the current DV preset,
-applications use the &VIDIOC-G-DV-PRESET; ioctl and to set a preset they use the
-&VIDIOC-S-DV-PRESET; ioctl. To detect the preset as seen by the video receiver applications
-use the &VIDIOC-QUERY-DV-PRESET; ioctl.</para>
 	<para>Applications can make use of the <xref linkend="input-capabilities" /> and
 <xref linkend="output-capabilities"/> flags to decide what ioctls are available to set the
 video timings for the device.</para>

Documentation/DocBook/media/v4l/compat.xml

@@ -2310,6 +2310,9 @@ more information.</para>
 	<listitem>
 	  <para>Added FM Modulator (FM TX) Extended Control Class: <constant>V4L2_CTRL_CLASS_FM_TX</constant> and their Control IDs.</para>
 	</listitem>
+<listitem>
+	  <para>Added FM Receiver (FM RX) Extended Control Class: <constant>V4L2_CTRL_CLASS_FM_RX</constant> and their Control IDs.</para>
+	</listitem>
 	<listitem>
 	  <para>Added Remote Controller chapter, describing the default Remote Controller mapping for media devices.</para>
 	</listitem>
@@ -2493,6 +2496,23 @@ that used it. It was originally scheduled for removal in 2.6.35.
       </orderedlist>
     </section>
 
+    <section>
+      <title>V4L2 in Linux 3.10</title>
+      <orderedlist>
+        <listitem>
+	  <para>Removed obsolete and unused DV_PRESET ioctls
+	  VIDIOC_G_DV_PRESET, VIDIOC_S_DV_PRESET, VIDIOC_QUERY_DV_PRESET and
+	  VIDIOC_ENUM_DV_PRESET. Remove the related v4l2_input/output capability
+	  flags V4L2_IN_CAP_PRESETS and V4L2_OUT_CAP_PRESETS.
+	  </para>
+        </listitem>
+        <listitem>
+	  <para>Added new debugging ioctl &VIDIOC-DBG-G-CHIP-INFO;.
+	  </para>
+        </listitem>
+      </orderedlist>
+    </section>
+
     <section id="other">
       <title>Relation of V4L2 to other Linux multimedia APIs</title>
 
@@ -2625,8 +2645,8 @@ interfaces and should not be implemented in new drivers.</para>
 <xref linkend="extended-controls" />.</para>
         </listitem>
         <listitem>
-	  <para>&VIDIOC-G-DV-PRESET;, &VIDIOC-S-DV-PRESET;, &VIDIOC-ENUM-DV-PRESETS; and
-	  &VIDIOC-QUERY-DV-PRESET; ioctls. Use the DV Timings API (<xref linkend="dv-timings" />).</para>
+	  <para>VIDIOC_G_DV_PRESET, VIDIOC_S_DV_PRESET, VIDIOC_ENUM_DV_PRESETS and
+	  VIDIOC_QUERY_DV_PRESET ioctls. Use the DV Timings API (<xref linkend="dv-timings" />).</para>
         </listitem>
         <listitem>
 	  <para><constant>VIDIOC_SUBDEV_G_CROP</constant> and

Documentation/DocBook/media/v4l/controls.xml

@@ -2299,6 +2299,12 @@ Possible values are:</entry>
 		</entrytbl>
 	      </row>
 	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER</constant>&nbsp;</entry>
+		<entry>boolean</entry>
+	      </row><row><entry spanname="descr">Repeat the video sequence headers. Repeating these
+headers makes random access to the video stream easier. Applicable to the MPEG1, 2 and 4 encoder.</entry>
+	      </row>
 	      <row>
 		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER</constant>&nbsp;</entry>
 		<entry>boolean</entry>
@@ -3136,6 +3142,13 @@ giving priority to the center of the metered area.</entry>
 		  <entry><constant>V4L2_EXPOSURE_METERING_SPOT</constant>&nbsp;</entry>
 		  <entry>Measure only very small area at the center of the frame.</entry>
 		</row>
+		<row>
+		  <entry><constant>V4L2_EXPOSURE_METERING_MATRIX</constant>&nbsp;</entry>
+		  <entry>A multi-zone metering. The light intensity is measured
+in several points of the frame and the the results are combined. The
+algorithm of the zones selection and their significance in calculating the
+final value is device dependant.</entry>
+		</row>
 	      </tbody>
 	    </entrytbl>
 	  </row>
@@ -3848,7 +3861,7 @@ in Hz. The range and step are driver-specific.</entry>
 	  </row>
 	  <row>
 	    <entry spanname="id"><constant>V4L2_CID_TUNE_PREEMPHASIS</constant>&nbsp;</entry>
-	    <entry>integer</entry>
+	    <entry>enum v4l2_preemphasis</entry>
 	  </row>
 	  <row id="v4l2-preemphasis"><entry spanname="descr">Configures the pre-emphasis value for broadcasting.
 A pre-emphasis filter is applied to the broadcast to accentuate the high audio frequencies.
@@ -4687,4 +4700,76 @@ interface and may change in the future.</para>
       </table>
 
     </section>
+
+    <section id="fm-rx-controls">
+      <title>FM Receiver Control Reference</title>
+
+      <para>The FM Receiver (FM_RX) class includes controls for common features of
+      FM Reception capable devices.</para>
+
+      <table pgwide="1" frame="none" id="fm-rx-control-id">
+      <title>FM_RX Control IDs</title>
+
+      <tgroup cols="4">
+        <colspec colname="c1" colwidth="1*" />
+        <colspec colname="c2" colwidth="6*" />
+        <colspec colname="c3" colwidth="2*" />
+        <colspec colname="c4" colwidth="6*" />
+        <spanspec namest="c1" nameend="c2" spanname="id" />
+        <spanspec namest="c2" nameend="c4" spanname="descr" />
+        <thead>
+          <row>
+            <entry spanname="id" align="left">ID</entry>
+            <entry align="left">Type</entry>
+          </row><row rowsep="1"><entry spanname="descr" align="left">Description</entry>
+          </row>
+        </thead>
+        <tbody valign="top">
+          <row><entry></entry></row>
+          <row>
+            <entry spanname="id"><constant>V4L2_CID_FM_RX_CLASS</constant>&nbsp;</entry>
+            <entry>class</entry>
+          </row><row><entry spanname="descr">The FM_RX class
+descriptor. Calling &VIDIOC-QUERYCTRL; for this control will return a
+description of this control class.</entry>
+          </row>
+          <row>
+            <entry spanname="id"><constant>V4L2_CID_RDS_RECEPTION</constant>&nbsp;</entry>
+            <entry>boolean</entry>
+          </row><row><entry spanname="descr">Enables/disables RDS
+	  reception by the radio tuner</entry>
+          </row>
+          <row>
+	    <entry spanname="id"><constant>V4L2_CID_TUNE_DEEMPHASIS</constant>&nbsp;</entry>
+	    <entry>enum v4l2_deemphasis</entry>
+	  </row>
+	  <row id="v4l2-deemphasis"><entry spanname="descr">Configures the de-emphasis value for reception.
+A de-emphasis filter is applied to the broadcast to accentuate the high audio frequencies.
+Depending on the region, a time constant of either 50 or 75 useconds is used. The enum&nbsp;v4l2_deemphasis
+defines possible values for de-emphasis. Here they are:</entry>
+	</row><row>
+	<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_DEEMPHASIS_DISABLED</constant>&nbsp;</entry>
+		      <entry>No de-emphasis is applied.</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_DEEMPHASIS_50_uS</constant>&nbsp;</entry>
+		      <entry>A de-emphasis of 50 uS is used.</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_DEEMPHASIS_75_uS</constant>&nbsp;</entry>
+		      <entry>A de-emphasis of 75 uS is used.</entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+
+	  </row>
+          <row><entry></entry></row>
+        </tbody>
+      </tgroup>
+      </table>
+
+      </section>
 </section>

Documentation/DocBook/media/v4l/io.xml

@@ -1145,6 +1145,12 @@ in which case caches have not been used.</entry>
 	    same clock outside V4L2, use
 	    <function>clock_gettime(2)</function> .</entry>
 	  </row>
+	  <row>
+	    <entry><constant>V4L2_BUF_FLAG_TIMESTAMP_COPY</constant></entry>
+	    <entry>0x4000</entry>
+	    <entry>The CAPTURE buffer timestamp has been taken from the
+	    corresponding OUTPUT buffer. This flag applies only to mem2mem devices.</entry>
+	  </row>
 	</tbody>
       </tgroup>
     </table>

Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml

@@ -272,6 +272,16 @@
 	    <entry><constant>MEDIA_ENT_T_V4L2_SUBDEV_LENS</constant></entry>
 	    <entry>Lens controller</entry>
 	  </row>
+	  <row>
+	    <entry><constant>MEDIA_ENT_T_V4L2_SUBDEV_DECODER</constant></entry>
+	    <entry>Video decoder, the basic function of the video decoder is to
+	    accept analogue video from a wide variety of sources such as
+	    broadcast, DVD players, cameras and video cassette recorders, in
+	    either NTSC, PAL or HD format and still occasionally SECAM, separate
+	    it into its component parts, luminance and chrominance, and output
+	    it in some digital video standard, with appropriate embedded timing
+	    signals.</entry>
+	  </row>
 	</tbody>
       </tgroup>
     </table>

Documentation/DocBook/media/v4l/subdev-formats.xml

@@ -93,19 +93,35 @@
 
       <table pgwide="0" frame="none" id="v4l2-mbus-pixelcode-rgb">
 	<title>RGB formats</title>
-	<tgroup cols="11">
+	<tgroup cols="27">
 	  <colspec colname="id" align="left" />
 	  <colspec colname="code" align="center"/>
 	  <colspec colname="bit" />
-	  <colspec colnum="4" colname="b07" align="center" />
-	  <colspec colnum="5" colname="b06" align="center" />
-	  <colspec colnum="6" colname="b05" align="center" />
-	  <colspec colnum="7" colname="b04" align="center" />
-	  <colspec colnum="8" colname="b03" align="center" />
-	  <colspec colnum="9" colname="b02" align="center" />
-	  <colspec colnum="10" colname="b01" align="center" />
-	  <colspec colnum="11" colname="b00" align="center" />
-	  <spanspec namest="b07" nameend="b00" spanname="b0" />
+	  <colspec colnum="4" colname="b23" align="center" />
+	  <colspec colnum="5" colname="b22" align="center" />
+	  <colspec colnum="6" colname="b21" align="center" />
+	  <colspec colnum="7" colname="b20" align="center" />
+	  <colspec colnum="8" colname="b19" align="center" />
+	  <colspec colnum="9" colname="b18" align="center" />
+	  <colspec colnum="10" colname="b17" align="center" />
+	  <colspec colnum="11" colname="b16" align="center" />
+	  <colspec colnum="12" colname="b15" align="center" />
+	  <colspec colnum="13" colname="b14" align="center" />
+	  <colspec colnum="14" colname="b13" align="center" />
+	  <colspec colnum="15" colname="b12" align="center" />
+	  <colspec colnum="16" colname="b11" align="center" />
+	  <colspec colnum="17" colname="b10" align="center" />
+	  <colspec colnum="18" colname="b09" align="center" />
+	  <colspec colnum="19" colname="b08" align="center" />
+	  <colspec colnum="20" colname="b07" align="center" />
+	  <colspec colnum="21" colname="b06" align="center" />
+	  <colspec colnum="22" colname="b05" align="center" />
+	  <colspec colnum="23" colname="b04" align="center" />
+	  <colspec colnum="24" colname="b03" align="center" />
+	  <colspec colnum="25" colname="b02" align="center" />
+	  <colspec colnum="26" colname="b01" align="center" />
+	  <colspec colnum="27" colname="b00" align="center" />
+	  <spanspec namest="b23" nameend="b00" spanname="b0" />
 	  <thead>
 	    <row>
 	      <entry>Identifier</entry>
@@ -117,6 +133,22 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry>Bit</entry>
+	      <entry>23</entry>
+	      <entry>22</entry>
+	      <entry>21</entry>
+	      <entry>20</entry>
+	      <entry>19</entry>
+	      <entry>18</entry>
+	      <entry>17</entry>
+	      <entry>16</entry>
+	      <entry>15</entry>
+	      <entry>14</entry>
+	      <entry>13</entry>
+	      <entry>12</entry>
+	      <entry>11</entry>
+	      <entry>10</entry>
+	      <entry>9</entry>
+	      <entry>8</entry>
 	      <entry>7</entry>
 	      <entry>6</entry>
 	      <entry>5</entry>
@@ -132,6 +164,7 @@
 	      <entry>V4L2_MBUS_FMT_RGB444_2X8_PADHI_BE</entry>
 	      <entry>0x1001</entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>0</entry>
 	      <entry>0</entry>
 	      <entry>0</entry>
@@ -145,6 +178,7 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>g<subscript>3</subscript></entry>
 	      <entry>g<subscript>2</subscript></entry>
 	      <entry>g<subscript>1</subscript></entry>
@@ -158,6 +192,7 @@
 	      <entry>V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE</entry>
 	      <entry>0x1002</entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>g<subscript>3</subscript></entry>
 	      <entry>g<subscript>2</subscript></entry>
 	      <entry>g<subscript>1</subscript></entry>
@@ -171,6 +206,7 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>0</entry>
 	      <entry>0</entry>
 	      <entry>0</entry>
@@ -184,6 +220,7 @@
 	      <entry>V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE</entry>
 	      <entry>0x1003</entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>0</entry>
 	      <entry>r<subscript>4</subscript></entry>
 	      <entry>r<subscript>3</subscript></entry>
@@ -197,6 +234,7 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>g<subscript>2</subscript></entry>
 	      <entry>g<subscript>1</subscript></entry>
 	      <entry>g<subscript>0</subscript></entry>
@@ -210,6 +248,7 @@
 	      <entry>V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE</entry>
 	      <entry>0x1004</entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>g<subscript>2</subscript></entry>
 	      <entry>g<subscript>1</subscript></entry>
 	      <entry>g<subscript>0</subscript></entry>
@@ -223,6 +262,7 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>0</entry>
 	      <entry>r<subscript>4</subscript></entry>
 	      <entry>r<subscript>3</subscript></entry>
@@ -236,6 +276,7 @@
 	      <entry>V4L2_MBUS_FMT_BGR565_2X8_BE</entry>
 	      <entry>0x1005</entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>b<subscript>4</subscript></entry>
 	      <entry>b<subscript>3</subscript></entry>
 	      <entry>b<subscript>2</subscript></entry>
@@ -249,6 +290,7 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>g<subscript>2</subscript></entry>
 	      <entry>g<subscript>1</subscript></entry>
 	      <entry>g<subscript>0</subscript></entry>
@@ -262,6 +304,7 @@
 	      <entry>V4L2_MBUS_FMT_BGR565_2X8_LE</entry>
 	      <entry>0x1006</entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>g<subscript>2</subscript></entry>
 	      <entry>g<subscript>1</subscript></entry>
 	      <entry>g<subscript>0</subscript></entry>
@@ -275,6 +318,7 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>b<subscript>4</subscript></entry>
 	      <entry>b<subscript>3</subscript></entry>
 	      <entry>b<subscript>2</subscript></entry>
@@ -288,6 +332,7 @@
 	      <entry>V4L2_MBUS_FMT_RGB565_2X8_BE</entry>
 	      <entry>0x1007</entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>r<subscript>4</subscript></entry>
 	      <entry>r<subscript>3</subscript></entry>
 	      <entry>r<subscript>2</subscript></entry>
@@ -301,6 +346,7 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>g<subscript>2</subscript></entry>
 	      <entry>g<subscript>1</subscript></entry>
 	      <entry>g<subscript>0</subscript></entry>
@@ -314,6 +360,7 @@
 	      <entry>V4L2_MBUS_FMT_RGB565_2X8_LE</entry>
 	      <entry>0x1008</entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>g<subscript>2</subscript></entry>
 	      <entry>g<subscript>1</subscript></entry>
 	      <entry>g<subscript>0</subscript></entry>
@@ -327,6 +374,27 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
+	      &dash-ent-16;
+	      <entry>r<subscript>4</subscript></entry>
+	      <entry>r<subscript>3</subscript></entry>
+	      <entry>r<subscript>2</subscript></entry>
+	      <entry>r<subscript>1</subscript></entry>
+	      <entry>r<subscript>0</subscript></entry>
+	      <entry>g<subscript>5</subscript></entry>
+	      <entry>g<subscript>4</subscript></entry>
+	      <entry>g<subscript>3</subscript></entry>
+	    </row>
+	    <row id="V4L2-MBUS-FMT-RGB666-1X18">
+	      <entry>V4L2_MBUS_FMT_RGB666_1X18</entry>
+	      <entry>0x1009</entry>
+	      <entry></entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>r<subscript>5</subscript></entry>
 	      <entry>r<subscript>4</subscript></entry>
 	      <entry>r<subscript>3</subscript></entry>
 	      <entry>r<subscript>2</subscript></entry>
@@ -335,6 +403,124 @@
 	      <entry>g<subscript>5</subscript></entry>
 	      <entry>g<subscript>4</subscript></entry>
 	      <entry>g<subscript>3</subscript></entry>
+	      <entry>g<subscript>2</subscript></entry>
+	      <entry>g<subscript>1</subscript></entry>
+	      <entry>g<subscript>0</subscript></entry>
+	      <entry>b<subscript>5</subscript></entry>
+	      <entry>b<subscript>4</subscript></entry>
+	      <entry>b<subscript>3</subscript></entry>
+	      <entry>b<subscript>2</subscript></entry>
+	      <entry>b<subscript>1</subscript></entry>
+	      <entry>b<subscript>0</subscript></entry>
+	    </row>
+	    <row id="V4L2-MBUS-FMT-RGB888-1X24">
+	      <entry>V4L2_MBUS_FMT_RGB888_1X24</entry>
+	      <entry>0x100a</entry>
+	      <entry></entry>
+	      <entry>r<subscript>7</subscript></entry>
+	      <entry>r<subscript>6</subscript></entry>
+	      <entry>r<subscript>5</subscript></entry>
+	      <entry>r<subscript>4</subscript></entry>
+	      <entry>r<subscript>3</subscript></entry>
+	      <entry>r<subscript>2</subscript></entry>
+	      <entry>r<subscript>1</subscript></entry>
+	      <entry>r<subscript>0</subscript></entry>
+	      <entry>g<subscript>7</subscript></entry>
+	      <entry>g<subscript>6</subscript></entry>
+	      <entry>g<subscript>5</subscript></entry>
+	      <entry>g<subscript>4</subscript></entry>
+	      <entry>g<subscript>3</subscript></entry>
+	      <entry>g<subscript>2</subscript></entry>
+	      <entry>g<subscript>1</subscript></entry>
+	      <entry>g<subscript>0</subscript></entry>
+	      <entry>b<subscript>7</subscript></entry>
+	      <entry>b<subscript>6</subscript></entry>
+	      <entry>b<subscript>5</subscript></entry>
+	      <entry>b<subscript>4</subscript></entry>
+	      <entry>b<subscript>3</subscript></entry>
+	      <entry>b<subscript>2</subscript></entry>
+	      <entry>b<subscript>1</subscript></entry>
+	      <entry>b<subscript>0</subscript></entry>
+	    </row>
+	    <row id="V4L2-MBUS-FMT-RGB888-2X12-BE">
+	      <entry>V4L2_MBUS_FMT_RGB888_2X12_BE</entry>
+	      <entry>0x100b</entry>
+	      <entry></entry>
+	      &dash-ent-10;
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>r<subscript>7</subscript></entry>
+	      <entry>r<subscript>6</subscript></entry>
+	      <entry>r<subscript>5</subscript></entry>
+	      <entry>r<subscript>4</subscript></entry>
+	      <entry>r<subscript>3</subscript></entry>
+	      <entry>r<subscript>2</subscript></entry>
+	      <entry>r<subscript>1</subscript></entry>
+	      <entry>r<subscript>0</subscript></entry>
+	      <entry>g<subscript>7</subscript></entry>
+	      <entry>g<subscript>6</subscript></entry>
+	      <entry>g<subscript>5</subscript></entry>
+	      <entry>g<subscript>4</subscript></entry>
+	    </row>
+	    <row>
+	      <entry></entry>
+	      <entry></entry>
+	      <entry></entry>
+	      &dash-ent-10;
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>g<subscript>3</subscript></entry>
+	      <entry>g<subscript>2</subscript></entry>
+	      <entry>g<subscript>1</subscript></entry>
+	      <entry>g<subscript>0</subscript></entry>
+	      <entry>b<subscript>7</subscript></entry>
+	      <entry>b<subscript>6</subscript></entry>
+	      <entry>b<subscript>5</subscript></entry>
+	      <entry>b<subscript>4</subscript></entry>
+	      <entry>b<subscript>3</subscript></entry>
+	      <entry>b<subscript>2</subscript></entry>
+	      <entry>b<subscript>1</subscript></entry>
+	      <entry>b<subscript>0</subscript></entry>
+	    </row>
+	    <row id="V4L2-MBUS-FMT-RGB888-2X12-LE">
+	      <entry>V4L2_MBUS_FMT_RGB888_2X12_LE</entry>
+	      <entry>0x100c</entry>
+	      <entry></entry>
+	      &dash-ent-10;
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>g<subscript>3</subscript></entry>
+	      <entry>g<subscript>2</subscript></entry>
+	      <entry>g<subscript>1</subscript></entry>
+	      <entry>g<subscript>0</subscript></entry>
+	      <entry>b<subscript>7</subscript></entry>
+	      <entry>b<subscript>6</subscript></entry>
+	      <entry>b<subscript>5</subscript></entry>
+	      <entry>b<subscript>4</subscript></entry>
+	      <entry>b<subscript>3</subscript></entry>
+	      <entry>b<subscript>2</subscript></entry>
+	      <entry>b<subscript>1</subscript></entry>
+	      <entry>b<subscript>0</subscript></entry>
+	    </row>
+	    <row>
+	      <entry></entry>
+	      <entry></entry>
+	      <entry></entry>
+	      &dash-ent-10;
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>r<subscript>7</subscript></entry>
+	      <entry>r<subscript>6</subscript></entry>
+	      <entry>r<subscript>5</subscript></entry>
+	      <entry>r<subscript>4</subscript></entry>
+	      <entry>r<subscript>3</subscript></entry>
+	      <entry>r<subscript>2</subscript></entry>
+	      <entry>r<subscript>1</subscript></entry>
+	      <entry>r<subscript>0</subscript></entry>
+	      <entry>g<subscript>7</subscript></entry>
+	      <entry>g<subscript>6</subscript></entry>
+	      <entry>g<subscript>5</subscript></entry>
+	      <entry>g<subscript>4</subscript></entry>
 	    </row>
 	  </tbody>
 	</tgroup>

Documentation/DocBook/media/v4l/v4l2.xml

@@ -124,6 +124,7 @@ Remote Controller chapter.</contrib>
       <year>2010</year>
       <year>2011</year>
       <year>2012</year>
+      <year>2013</year>
       <holder>Bill Dirks, Michael H. Schimek, Hans Verkuil, Martin
 Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab,
 	Pawel Osciak</holder>
@@ -139,13 +140,23 @@ structs, ioctls) must be noted in more detail in the history chapter
 (compat.xml), along with the possible impact on existing drivers and
 applications. -->
 
+      <revision>
+	<revnumber>3.10</revnumber>
+	<date>2013-03-25</date>
+	<authorinitials>hv</authorinitials>
+	<revremark>Remove obsolete and unused DV_PRESET ioctls:
+	VIDIOC_G_DV_PRESET, VIDIOC_S_DV_PRESET, VIDIOC_QUERY_DV_PRESET and
+	VIDIOC_ENUM_DV_PRESET. Remove the related v4l2_input/output capability
+	flags V4L2_IN_CAP_PRESETS and V4L2_OUT_CAP_PRESETS. Added VIDIOC_DBG_G_CHIP_INFO.
+	</revremark>
+      </revision>
+
       <revision>
 	<revnumber>3.9</revnumber>
 	<date>2012-12-03</date>
 	<authorinitials>sa, sn</authorinitials>
 	<revremark>Added timestamp types to v4l2_buffer.
-	Added <constant>V4L2_EVENT_CTRL_CH_RANGE</constant> control
-	event changes flag, see <xref linkend="changes-flags"/>.
+	Added V4L2_EVENT_CTRL_CH_RANGE control event changes flag.
 	</revremark>
       </revision>
 
@@ -537,6 +548,7 @@ and discussions on the V4L mailing list.</revremark>
     &sub-create-bufs;
     &sub-cropcap;
     &sub-dbg-g-chip-ident;
+    &sub-dbg-g-chip-info;
     &sub-dbg-g-register;
     &sub-decoder-cmd;
     &sub-dqevent;
@@ -544,7 +556,6 @@ and discussions on the V4L mailing list.</revremark>
     &sub-encoder-cmd;
     &sub-enumaudio;
     &sub-enumaudioout;
-    &sub-enum-dv-presets;
     &sub-enum-dv-timings;
     &sub-enum-fmt;
     &sub-enum-framesizes;
@@ -558,7 +569,6 @@ and discussions on the V4L mailing list.</revremark>
     &sub-g-audioout;
     &sub-g-crop;
     &sub-g-ctrl;
-    &sub-g-dv-preset;
     &sub-g-dv-timings;
     &sub-g-enc-index;
     &sub-g-ext-ctrls;
@@ -582,7 +592,6 @@ and discussions on the V4L mailing list.</revremark>
     &sub-querybuf;
     &sub-querycap;
     &sub-queryctrl;
-    &sub-query-dv-preset;
     &sub-query-dv-timings;
     &sub-querystd;
     &sub-reqbufs;

Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-ident.xml

@@ -200,10 +200,10 @@ the values from <xref linkend="chip-ids" />.</entry>
 	&cs-def;
 	<tbody valign="top">
 	  <row>
-	    <entry><constant>V4L2_CHIP_MATCH_HOST</constant></entry>
+	    <entry><constant>V4L2_CHIP_MATCH_BRIDGE</constant></entry>
 	    <entry>0</entry>
 	    <entry>Match the nth chip on the card, zero for the
-	    host chip. Does not match &i2c; chips.</entry>
+	    bridge chip. Does not match sub-devices.</entry>
 	  </row>
 	  <row>
 	    <entry><constant>V4L2_CHIP_MATCH_I2C_DRIVER</constant></entry>
@@ -220,6 +220,11 @@ the values from <xref linkend="chip-ids" />.</entry>
 	    <entry>3</entry>
 	    <entry>Match the nth anciliary AC97 chip.</entry>
 	  </row>
+	  <row>
+	    <entry><constant>V4L2_CHIP_MATCH_SUBDEV</constant></entry>
+	    <entry>4</entry>
+	    <entry>Match the nth sub-device. Can't be used with this ioctl.</entry>
+	  </row>
 	</tbody>
       </tgroup>
     </table>

Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-info.xml

+<refentry id="vidioc-dbg-g-chip-info">
+  <refmeta>
+    <refentrytitle>ioctl VIDIOC_DBG_G_CHIP_INFO</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>VIDIOC_DBG_G_CHIP_INFO</refname>
+    <refpurpose>Identify the chips on a TV card</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcprototype>
+	<funcdef>int <function>ioctl</function></funcdef>
+	<paramdef>int <parameter>fd</parameter></paramdef>
+	<paramdef>int <parameter>request</parameter></paramdef>
+	<paramdef>struct v4l2_dbg_chip_info
+*<parameter>argp</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+      <varlistentry>
+	<term><parameter>fd</parameter></term>
+	<listitem>
+	  <para>&fd;</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>request</parameter></term>
+	<listitem>
+	  <para>VIDIOC_DBG_G_CHIP_INFO</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>argp</parameter></term>
+	<listitem>
+	  <para></para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Description</title>
+
+    <note>
+      <title>Experimental</title>
+
+      <para>This is an <link
+linkend="experimental">experimental</link> interface and may change in
+the future.</para>
+    </note>
+
+    <para>For driver debugging purposes this ioctl allows test
+applications to query the driver about the chips present on the TV
+card. Regular applications must not use it. When you found a chip
+specific bug, please contact the linux-media mailing list (&v4l-ml;)
+so it can be fixed.</para>
+
+    <para>Additionally the Linux kernel must be compiled with the
+<constant>CONFIG_VIDEO_ADV_DEBUG</constant> option to enable this ioctl.</para>
+
+    <para>To query the driver applications must initialize the
+<structfield>match.type</structfield> and
+<structfield>match.addr</structfield> or <structfield>match.name</structfield>
+fields of a &v4l2-dbg-chip-info;
+and call <constant>VIDIOC_DBG_G_CHIP_INFO</constant> with a pointer to
+this structure. On success the driver stores information about the
+selected chip in the <structfield>name</structfield> and
+<structfield>flags</structfield> fields. On failure the structure
+remains unchanged.</para>
+
+    <para>When <structfield>match.type</structfield> is
+<constant>V4L2_CHIP_MATCH_BRIDGE</constant>,
+<structfield>match.addr</structfield> selects the nth bridge 'chip'
+on the TV card. You can enumerate all chips by starting at zero and
+incrementing <structfield>match.addr</structfield> by one until
+<constant>VIDIOC_DBG_G_CHIP_INFO</constant> fails with an &EINVAL;.
+The number zero always selects the bridge chip itself, &eg; the chip
+connected to the PCI or USB bus. Non-zero numbers identify specific
+parts of the bridge chip such as an AC97 register block.</para>
+
+    <para>When <structfield>match.type</structfield> is
+<constant>V4L2_CHIP_MATCH_SUBDEV</constant>,
+<structfield>match.addr</structfield> selects the nth sub-device. This
+allows you to enumerate over all sub-devices.</para>
+
+    <para>On success, the <structfield>name</structfield> field will
+contain a chip name and the <structfield>flags</structfield> field will
+contain <constant>V4L2_CHIP_FL_READABLE</constant> if the driver supports
+reading registers from the device or <constant>V4L2_CHIP_FL_WRITABLE</constant>
+if the driver supports writing registers to the device.</para>
+
+    <para>We recommended the <application>v4l2-dbg</application>
+utility over calling this ioctl directly. It is available from the
+LinuxTV v4l-dvb repository; see <ulink
+url="http://linuxtv.org/repo/">http://linuxtv.org/repo/</ulink> for
+access instructions.</para>
+
+    <!-- Note for convenience vidioc-dbg-g-register.sgml
+	 contains a duplicate of this table. -->
+    <table pgwide="1" frame="none" id="name-v4l2-dbg-match">
+      <title>struct <structname>v4l2_dbg_match</structname></title>
+      <tgroup cols="4">
+	&cs-ustr;
+	<tbody valign="top">
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>type</structfield></entry>
+	    <entry>See <xref linkend="name-chip-match-types" /> for a list of
+possible types.</entry>
+	  </row>
+	  <row>
+	    <entry>union</entry>
+	    <entry>(anonymous)</entry>
+	  </row>
+	  <row>
+	    <entry></entry>
+	    <entry>__u32</entry>
+	    <entry><structfield>addr</structfield></entry>
+	    <entry>Match a chip by this number, interpreted according
+to the <structfield>type</structfield> field.</entry>
+	  </row>
+	  <row>
+	    <entry></entry>
+	    <entry>char</entry>
+	    <entry><structfield>name[32]</structfield></entry>
+	    <entry>Match a chip by this name, interpreted according
+to the <structfield>type</structfield> field.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+
+    <table pgwide="1" frame="none" id="v4l2-dbg-chip-info">
+      <title>struct <structname>v4l2_dbg_chip_info</structname></title>
+      <tgroup cols="3">
+	&cs-str;
+	<tbody valign="top">
+	  <row>
+	    <entry>struct v4l2_dbg_match</entry>
+	    <entry><structfield>match</structfield></entry>
+	    <entry>How to match the chip, see <xref linkend="name-v4l2-dbg-match" />.</entry>
+	  </row>
+	  <row>
+	    <entry>char</entry>
+	    <entry><structfield>name[32]</structfield></entry>
+	    <entry>The name of the chip.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>flags</structfield></entry>
+	    <entry>Set by the driver. If <constant>V4L2_CHIP_FL_READABLE</constant>
+is set, then the driver supports reading registers from the device. If
+<constant>V4L2_CHIP_FL_WRITABLE</constant> is set, then it supports writing registers.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>reserved[8]</structfield></entry>
+	    <entry>Reserved fields, both application and driver must set these to 0.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+
+    <!-- Note for convenience vidioc-dbg-g-register.sgml
+	 contains a duplicate of this table. -->
+    <table pgwide="1" frame="none" id="name-chip-match-types">
+      <title>Chip Match Types</title>
+      <tgroup cols="3">
+	&cs-def;
+	<tbody valign="top">
+	  <row>
+	    <entry><constant>V4L2_CHIP_MATCH_BRIDGE</constant></entry>
+	    <entry>0</entry>
+	    <entry>Match the nth chip on the card, zero for the
+	    bridge chip. Does not match sub-devices.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CHIP_MATCH_I2C_DRIVER</constant></entry>
+	    <entry>1</entry>
+	    <entry>Match an &i2c; chip by its driver name. Can't be used with this ioctl.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CHIP_MATCH_I2C_ADDR</constant></entry>
+	    <entry>2</entry>
+	    <entry>Match a chip by its 7 bit &i2c; bus address. Can't be used with this ioctl.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CHIP_MATCH_AC97</constant></entry>
+	    <entry>3</entry>
+	    <entry>Match the nth anciliary AC97 chip. Can't be used with this ioctl.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CHIP_MATCH_SUBDEV</constant></entry>
+	    <entry>4</entry>
+	    <entry>Match the nth sub-device.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+  </refsect1>
+
+  <refsect1>
+    &return-value;
+
+    <variablelist>
+      <varlistentry>
+	<term><errorcode>EINVAL</errorcode></term>
+	<listitem>
+	  <para>The <structfield>match_type</structfield> is invalid or
+no device could be matched.</para>
+	</listitem>
+      </varlistentry>
+     </variablelist>
+  </refsect1>
+</refentry>

Documentation/DocBook/media/v4l/vidioc-dbg-g-register.xml

@@ -87,7 +87,7 @@ written into the register.</para>
 
     <para>To read a register applications must initialize the
 <structfield>match.type</structfield>,
-<structfield>match.chip</structfield> or <structfield>match.name</structfield> and
+<structfield>match.addr</structfield> or <structfield>match.name</structfield> and
 <structfield>reg</structfield> fields, and call
 <constant>VIDIOC_DBG_G_REGISTER</constant> with a pointer to this
 structure. On success the driver stores the register value in the
@@ -95,11 +95,11 @@ structure. On success the driver stores the register value in the
 unchanged.</para>
 
     <para>When <structfield>match.type</structfield> is
-<constant>V4L2_CHIP_MATCH_HOST</constant>,
-<structfield>match.addr</structfield> selects the nth non-&i2c; chip
+<constant>V4L2_CHIP_MATCH_BRIDGE</constant>,
+<structfield>match.addr</structfield> selects the nth non-sub-device chip
 on the TV card.  The number zero always selects the host chip, &eg; the
 chip connected to the PCI or USB bus. You can find out which chips are
-present with the &VIDIOC-DBG-G-CHIP-IDENT; ioctl.</para>
+present with the &VIDIOC-DBG-G-CHIP-INFO; ioctl.</para>
 
     <para>When <structfield>match.type</structfield> is
 <constant>V4L2_CHIP_MATCH_I2C_DRIVER</constant>,
@@ -109,7 +109,7 @@ For instance
 supported by the saa7127 driver, regardless of its &i2c; bus address.
 When multiple chips supported by the same driver are present, the
 effect of these ioctls is undefined. Again with the
-&VIDIOC-DBG-G-CHIP-IDENT; ioctl you can find out which &i2c; chips are
+&VIDIOC-DBG-G-CHIP-INFO; ioctl you can find out which &i2c; chips are
 present.</para>
 
     <para>When <structfield>match.type</structfield> is
@@ -122,19 +122,23 @@ bus address.</para>
 <structfield>match.addr</structfield> selects the nth AC97 chip
 on the TV card.</para>
 
+    <para>When <structfield>match.type</structfield> is
+<constant>V4L2_CHIP_MATCH_SUBDEV</constant>,
+<structfield>match.addr</structfield> selects the nth sub-device.</para>
+
     <note>
       <title>Success not guaranteed</title>
 
       <para>Due to a flaw in the Linux &i2c; bus driver these ioctls may
 return successfully without actually reading or writing a register. To
-catch the most likely failure we recommend a &VIDIOC-DBG-G-CHIP-IDENT;
+catch the most likely failure we recommend a &VIDIOC-DBG-G-CHIP-INFO;
 call confirming the presence of the selected &i2c; chip.</para>
     </note>
 
     <para>These ioctls are optional, not all drivers may support them.
 However when a driver supports these ioctls it must also support
-&VIDIOC-DBG-G-CHIP-IDENT;. Conversely it may support
-<constant>VIDIOC_DBG_G_CHIP_IDENT</constant> but not these ioctls.</para>
+&VIDIOC-DBG-G-CHIP-INFO;. Conversely it may support
+<constant>VIDIOC_DBG_G_CHIP_INFO</constant> but not these ioctls.</para>
 
     <para><constant>VIDIOC_DBG_G_REGISTER</constant> and
 <constant>VIDIOC_DBG_S_REGISTER</constant> were introduced in Linux
@@ -217,10 +221,10 @@ register.</entry>
 	&cs-def;
 	<tbody valign="top">
 	  <row>
-	    <entry><constant>V4L2_CHIP_MATCH_HOST</constant></entry>
+	    <entry><constant>V4L2_CHIP_MATCH_BRIDGE</constant></entry>
 	    <entry>0</entry>
 	    <entry>Match the nth chip on the card, zero for the
-	    host chip. Does not match &i2c; chips.</entry>
+	    bridge chip. Does not match sub-devices.</entry>
 	  </row>
 	  <row>
 	    <entry><constant>V4L2_CHIP_MATCH_I2C_DRIVER</constant></entry>
@@ -237,6 +241,11 @@ register.</entry>
 	    <entry>3</entry>
 	    <entry>Match the nth anciliary AC97 chip.</entry>
 	  </row>
+	  <row>
+	    <entry><constant>V4L2_CHIP_MATCH_SUBDEV</constant></entry>
+	    <entry>4</entry>
+	    <entry>Match the nth sub-device.</entry>
+	  </row>
 	</tbody>
       </tgroup>
     </table>

Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml

-<refentry id="vidioc-enum-dv-presets">
-  <refmeta>
-    <refentrytitle>ioctl VIDIOC_ENUM_DV_PRESETS</refentrytitle>
-    &manvol;
-  </refmeta>
-
-  <refnamediv>
-    <refname>VIDIOC_ENUM_DV_PRESETS</refname>
-    <refpurpose>Enumerate supported Digital Video presets</refpurpose>
-  </refnamediv>
-
-  <refsynopsisdiv>
-    <funcsynopsis>
-      <funcprototype>
-	<funcdef>int <function>ioctl</function></funcdef>
-	<paramdef>int <parameter>fd</parameter></paramdef>
-	<paramdef>int <parameter>request</parameter></paramdef>
-	<paramdef>struct v4l2_dv_enum_preset *<parameter>argp</parameter></paramdef>
-      </funcprototype>
-    </funcsynopsis>
-  </refsynopsisdiv>
-
-  <refsect1>
-    <title>Arguments</title>
-
-    <variablelist>
-      <varlistentry>
-	<term><parameter>fd</parameter></term>
-	<listitem>
-	  <para>&fd;</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><parameter>request</parameter></term>
-	<listitem>
-	  <para>VIDIOC_ENUM_DV_PRESETS</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><parameter>argp</parameter></term>
-	<listitem>
-	  <para></para>
-	</listitem>
-      </varlistentry>
-    </variablelist>
-  </refsect1>
-
-  <refsect1>
-    <title>Description</title>
-
-    <para>This ioctl is <emphasis role="bold">deprecated</emphasis>.
-    New drivers and applications should use &VIDIOC-ENUM-DV-TIMINGS; instead.
-    </para>
-
-    <para>To query the attributes of a DV preset, applications initialize the
-<structfield>index</structfield> field and zero the reserved array of &v4l2-dv-enum-preset;
-and call the <constant>VIDIOC_ENUM_DV_PRESETS</constant> ioctl with a pointer to this
-structure. Drivers fill the rest of the structure or return an
-&EINVAL; when the index is out of bounds. To enumerate all DV Presets supported,
-applications shall begin at index zero, incrementing by one until the
-driver returns <errorcode>EINVAL</errorcode>. Drivers may enumerate a
-different set of DV presets after switching the video input or
-output.</para>
-
-    <table pgwide="1" frame="none" id="v4l2-dv-enum-preset">
-      <title>struct <structname>v4l2_dv_enum_presets</structname></title>
-      <tgroup cols="3">
-	&cs-str;
-	<tbody valign="top">
-	  <row>
-	    <entry>__u32</entry>
-	    <entry><structfield>index</structfield></entry>
-	    <entry>Number of the DV preset, set by the
-application.</entry>
-	  </row>
-	  <row>
-	    <entry>__u32</entry>
-	    <entry><structfield>preset</structfield></entry>
-	    <entry>This field identifies one of the DV preset values listed in <xref linkend="v4l2-dv-presets-vals"/>.</entry>
-	  </row>
-	  <row>
-	    <entry>__u8</entry>
-	    <entry><structfield>name</structfield>[24]</entry>
-	    <entry>Name of the preset, a NUL-terminated ASCII string, for example: "720P-60", "1080I-60". This information is
-intended for the user.</entry>
-	  </row>
-	  <row>
-	    <entry>__u32</entry>
-	    <entry><structfield>width</structfield></entry>
-	    <entry>Width of the active video in pixels for the DV preset.</entry>
-	  </row>
-	  <row>
-	    <entry>__u32</entry>
-	    <entry><structfield>height</structfield></entry>
-	    <entry>Height of the active video in lines for the DV preset.</entry>
-	  </row>
-	  <row>
-	    <entry>__u32</entry>
-	    <entry><structfield>reserved</structfield>[4]</entry>
-	    <entry>Reserved for future extensions. Drivers must set the array to zero.</entry>
-	  </row>
-	</tbody>
-      </tgroup>
-    </table>
-
-    <table pgwide="1" frame="none" id="v4l2-dv-presets-vals">
-      <title>struct <structname>DV Presets</structname></title>
-      <tgroup cols="3">
-	&cs-str;
-	<tbody valign="top">
-	  <row>
-	    <entry>Preset</entry>
-	    <entry>Preset value</entry>
-	    <entry>Description</entry>
-	  </row>
-	  <row>
-	    <entry></entry>
-	    <entry></entry>
-	    <entry></entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_INVALID</entry>
-	    <entry>0</entry>
-	    <entry>Invalid preset value.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_480P59_94</entry>
-	    <entry>1</entry>
-	    <entry>720x480 progressive video at 59.94 fps as per BT.1362.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_576P50</entry>
-	    <entry>2</entry>
-	    <entry>720x576 progressive video at 50 fps as per BT.1362.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_720P24</entry>
-	    <entry>3</entry>
-	    <entry>1280x720 progressive video at 24 fps as per SMPTE 296M.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_720P25</entry>
-	    <entry>4</entry>
-	    <entry>1280x720 progressive video at 25 fps as per SMPTE 296M.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_720P30</entry>
-	    <entry>5</entry>
-	    <entry>1280x720 progressive video at 30 fps as per SMPTE 296M.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_720P50</entry>
-	    <entry>6</entry>
-	    <entry>1280x720 progressive video at 50 fps as per SMPTE 296M.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_720P59_94</entry>
-	    <entry>7</entry>
-	    <entry>1280x720 progressive video at 59.94 fps as per SMPTE 274M.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_720P60</entry>
-	    <entry>8</entry>
-	    <entry>1280x720 progressive video at 60 fps as per SMPTE 274M/296M.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_1080I29_97</entry>
-	    <entry>9</entry>
-	    <entry>1920x1080 interlaced video at 29.97 fps as per BT.1120/SMPTE 274M.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_1080I30</entry>
-	    <entry>10</entry>
-	    <entry>1920x1080 interlaced video at 30 fps as per BT.1120/SMPTE 274M.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_1080I25</entry>
-	    <entry>11</entry>
-	    <entry>1920x1080 interlaced video at 25 fps as per BT.1120.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_1080I50</entry>
-	    <entry>12</entry>
-	    <entry>1920x1080 interlaced video at 50 fps as per SMPTE 296M.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_1080I60</entry>
-	    <entry>13</entry>
-	    <entry>1920x1080 interlaced video at 60 fps as per SMPTE 296M.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_1080P24</entry>
-	    <entry>14</entry>
-	    <entry>1920x1080 progressive video at 24 fps as per SMPTE 296M.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_1080P25</entry>
-	    <entry>15</entry>
-	    <entry>1920x1080 progressive video at 25 fps as per SMPTE 296M.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_1080P30</entry>
-	    <entry>16</entry>
-	    <entry>1920x1080 progressive video at 30 fps as per SMPTE 296M.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_1080P50</entry>
-	    <entry>17</entry>
-	    <entry>1920x1080 progressive video at 50 fps as per BT.1120.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_1080P60</entry>
-	    <entry>18</entry>
-	    <entry>1920x1080 progressive video at 60 fps as per BT.1120.</entry>
-	  </row>
-	</tbody>
-      </tgroup>
-    </table>
-  </refsect1>
-
-  <refsect1>
-    &return-value;
-
-    <variablelist>
-      <varlistentry>
-	<term><errorcode>EINVAL</errorcode></term>
-	<listitem>
-	  <para>The &v4l2-dv-enum-preset; <structfield>index</structfield>
-is out of bounds.</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><errorcode>ENODATA</errorcode></term>
-	<listitem>
-	  <para>Digital video presets are not supported for this input or output.</para>
-	</listitem>
-      </varlistentry>
-    </variablelist>
-  </refsect1>
-</refentry>

Documentation/DocBook/media/v4l/vidioc-enuminput.xml

@@ -277,11 +277,6 @@ input/output interface to linux-media@vger.kernel.org on 19 Oct 2009.
       <tgroup cols="3">
 	&cs-def;
 	<tbody valign="top">
-	  <row>
-	    <entry><constant>V4L2_IN_CAP_PRESETS</constant></entry>
-	    <entry>0x00000001</entry>
-	    <entry>This input supports setting DV presets by using VIDIOC_S_DV_PRESET.</entry>
-	  </row>
 	  <row>
 	    <entry><constant>V4L2_IN_CAP_DV_TIMINGS</constant></entry>
 	    <entry>0x00000002</entry>

Documentation/DocBook/media/v4l/vidioc-enumoutput.xml

@@ -162,11 +162,6 @@ input/output interface to linux-media@vger.kernel.org on 19 Oct 2009.
       <tgroup cols="3">
 	&cs-def;
 	<tbody valign="top">
-	  <row>
-	    <entry><constant>V4L2_OUT_CAP_PRESETS</constant></entry>
-	    <entry>0x00000001</entry>
-	    <entry>This output supports setting DV presets by using VIDIOC_S_DV_PRESET.</entry>
-	  </row>
 	  <row>
 	    <entry><constant>V4L2_OUT_CAP_DV_TIMINGS</constant></entry>
 	    <entry>0x00000002</entry>

Documentation/DocBook/media/v4l/vidioc-g-dv-preset.xml

-<refentry id="vidioc-g-dv-preset">
-  <refmeta>
-    <refentrytitle>ioctl VIDIOC_G_DV_PRESET, VIDIOC_S_DV_PRESET</refentrytitle>
-    &manvol;
-  </refmeta>
-
-  <refnamediv>
-    <refname>VIDIOC_G_DV_PRESET</refname>
-    <refname>VIDIOC_S_DV_PRESET</refname>
-    <refpurpose>Query or select the DV preset of the current input or output</refpurpose>
-  </refnamediv>
-
-  <refsynopsisdiv>
-    <funcsynopsis>
-      <funcprototype>
-	<funcdef>int <function>ioctl</function></funcdef>
-	<paramdef>int <parameter>fd</parameter></paramdef>
-	<paramdef>int <parameter>request</parameter></paramdef>
-	<paramdef>struct v4l2_dv_preset *<parameter>argp</parameter></paramdef>
-      </funcprototype>
-    </funcsynopsis>
-  </refsynopsisdiv>
-
-  <refsect1>
-    <title>Arguments</title>
-
-    <variablelist>
-      <varlistentry>
-	<term><parameter>fd</parameter></term>
-	<listitem>
-	  <para>&fd;</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><parameter>request</parameter></term>
-	<listitem>
-	  <para>VIDIOC_G_DV_PRESET, VIDIOC_S_DV_PRESET</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><parameter>argp</parameter></term>
-	<listitem>
-	  <para></para>
-	</listitem>
-      </varlistentry>
-    </variablelist>
-  </refsect1>
-
-  <refsect1>
-    <title>Description</title>
-
-    <para>These ioctls are <emphasis role="bold">deprecated</emphasis>.
-    New drivers and applications should use &VIDIOC-G-DV-TIMINGS; and &VIDIOC-S-DV-TIMINGS;
-    instead.
-    </para>
-
-    <para>To query and select the current DV preset, applications
-use the <constant>VIDIOC_G_DV_PRESET</constant> and <constant>VIDIOC_S_DV_PRESET</constant>
-ioctls which take a pointer to a &v4l2-dv-preset; type as argument.
-Applications must zero the reserved array in &v4l2-dv-preset;.
-<constant>VIDIOC_G_DV_PRESET</constant> returns a dv preset in the field
-<structfield>preset</structfield> of &v4l2-dv-preset;.</para>
-
-    <para><constant>VIDIOC_S_DV_PRESET</constant> accepts a pointer to a &v4l2-dv-preset;
-that has the preset value to be set. Applications must zero the reserved array in &v4l2-dv-preset;.
-If the preset is not supported, it returns an &EINVAL; </para>
-  </refsect1>
-
-  <refsect1>
-    &return-value;
-
-    <variablelist>
-      <varlistentry>
-	<term><errorcode>EINVAL</errorcode></term>
-	<listitem>
-	  <para>This ioctl is not supported, or the
-<constant>VIDIOC_S_DV_PRESET</constant>,<constant>VIDIOC_S_DV_PRESET</constant> parameter was unsuitable.</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><errorcode>ENODATA</errorcode></term>
-	<listitem>
-	  <para>Digital video presets are not supported for this input or output.</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><errorcode>EBUSY</errorcode></term>
-	<listitem>
-	  <para>The device is busy and therefore can not change the preset.</para>
-	</listitem>
-      </varlistentry>
-    </variablelist>
-
-    <table pgwide="1" frame="none" id="v4l2-dv-preset">
-      <title>struct <structname>v4l2_dv_preset</structname></title>
-      <tgroup cols="3">
-	&cs-str;
-	<tbody valign="top">
-	  <row>
-	    <entry>__u32</entry>
-	    <entry><structfield>preset</structfield></entry>
-	    <entry>Preset value to represent the digital video timings</entry>
-	  </row>
-	  <row>
-	    <entry>__u32</entry>
-	    <entry><structfield>reserved[4]</structfield></entry>
-	    <entry>Reserved fields for future use</entry>
-	  </row>
-	</tbody>
-      </tgroup>
-    </table>
-  </refsect1>
-</refentry>

Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml

@@ -319,6 +319,15 @@ These controls are described in <xref
 	    processing controls. These controls are described in <xref
 	    linkend="image-process-controls" />.</entry>
 	  </row>
+
+	  <row>
+	    <entry><constant>V4L2_CTRL_CLASS_FM_RX</constant></entry>
+	    <entry>0xa10000</entry>
+	    <entry>The class containing FM Receiver (FM RX) controls.
+These controls are described in <xref
+		linkend="fm-rx-controls" />.</entry>
+	  </row>
+
 	</tbody>
       </tgroup>
     </table>

Documentation/DocBook/media/v4l/vidioc-query-dv-preset.xml

-<refentry id="vidioc-query-dv-preset">
-  <refmeta>
-    <refentrytitle>ioctl VIDIOC_QUERY_DV_PRESET</refentrytitle>
-    &manvol;
-  </refmeta>
-
-  <refnamediv>
-    <refname>VIDIOC_QUERY_DV_PRESET</refname>
-    <refpurpose>Sense the DV preset received by the current
-input</refpurpose>
-  </refnamediv>
-
-  <refsynopsisdiv>
-    <funcsynopsis>
-      <funcprototype>
-	<funcdef>int <function>ioctl</function></funcdef>
-	<paramdef>int <parameter>fd</parameter></paramdef>
-	<paramdef>int <parameter>request</parameter></paramdef>
-	<paramdef>struct v4l2_dv_preset *<parameter>argp</parameter></paramdef>
-      </funcprototype>
-    </funcsynopsis>
-  </refsynopsisdiv>
-
-  <refsect1>
-    <title>Arguments</title>
-
-    <variablelist>
-	<varlistentry>
-	<term><parameter>fd</parameter></term>
-	<listitem>
-	  <para>&fd;</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><parameter>request</parameter></term>
-	<listitem>
-	  <para>VIDIOC_QUERY_DV_PRESET</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><parameter>argp</parameter></term>
-	<listitem>
-	  <para></para>
-	</listitem>
-      </varlistentry>
-    </variablelist>
-  </refsect1>
-
-  <refsect1>
-    <title>Description</title>
-
-    <para>This ioctl is <emphasis role="bold">deprecated</emphasis>.
-    New drivers and applications should use &VIDIOC-QUERY-DV-TIMINGS; instead.
-    </para>
-
-    <para>The hardware may be able to detect the current DV preset
-automatically, similar to sensing the video standard. To do so, applications
-call <constant> VIDIOC_QUERY_DV_PRESET</constant> with a pointer to a
-&v4l2-dv-preset; type. Once the hardware detects a preset, that preset is
-returned in the preset field of &v4l2-dv-preset;. If the preset could not be
-detected because there was no signal, or the signal was unreliable, or the
-signal did not map to a supported preset, then the value V4L2_DV_INVALID is
-returned.</para>
-  </refsect1>
-
-  <refsect1>
-    &return-value;
-
-    <variablelist>
-      <varlistentry>
-	<term><errorcode>ENODATA</errorcode></term>
-	<listitem>
-	  <para>Digital video presets are not supported for this input or output.</para>
-	</listitem>
-      </varlistentry>
-    </variablelist>
-  </refsect1>
-</refentry>

Documentation/DocBook/media_api.tmpl

@@ -23,6 +23,7 @@
 <!-- LinuxTV v4l-dvb repository. -->
 <!ENTITY v4l-dvb		"<ulink url='http://linuxtv.org/repo/'>http://linuxtv.org/repo/</ulink>">
 <!ENTITY dash-ent-10            "<entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry>">
+<!ENTITY dash-ent-16            "<entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry>">
 ]>
 
 <book id="media_api">

Documentation/DocBook/writing-an-alsa-driver.tmpl

@@ -6164,14 +6164,12 @@ struct _snd_pcm_runtime {
 
       <para>
         The macro takes an conditional expression to evaluate.
-	When <constant>CONFIG_SND_DEBUG</constant>, is set, the
-	expression is actually evaluated. If it's non-zero, it shows
-	the warning message such as
+	When <constant>CONFIG_SND_DEBUG</constant>, is set, if the
+	expression is non-zero, it shows the warning message such as
 	<computeroutput>BUG? (xxx)</computeroutput>
-	normally followed by stack trace.  It returns the evaluated
-	value.
-	When no <constant>CONFIG_SND_DEBUG</constant> is set, this
-	macro always returns zero.
+	normally followed by stack trace.
+
+	In both cases it returns the evaluated value.
       </para>
 
     </section>

Documentation/EDID/1600x1200.S

+/*
+   1600x1200.S: EDID data set for standard 1600x1200 60 Hz monitor
+
+   Copyright (C) 2013 Carsten Emde <C.Emde@osadl.org>
+
+   This program is free software; you can redistribute it and/or
+   modify it under the terms of the GNU General Public License
+   as published by the Free Software Foundation; either version 2
+   of the License, or (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA.
+*/
+
+/* EDID */
+#define VERSION 1
+#define REVISION 3
+
+/* Display */
+#define CLOCK 162000 /* kHz */
+#define XPIX 1600
+#define YPIX 1200
+#define XY_RATIO XY_RATIO_4_3
+#define XBLANK 560
+#define YBLANK 50
+#define XOFFSET 64
+#define XPULSE 192
+#define YOFFSET (63+1)
+#define YPULSE (63+3)
+#define DPI 72
+#define VFREQ 60 /* Hz */
+#define TIMING_NAME "Linux UXGA"
+#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */
+#define HSYNC_POL 1
+#define VSYNC_POL 1
+#define CRC 0x9d
+
+#include "edid.S"

Documentation/EDID/HOWTO.txt

@@ -18,12 +18,12 @@ CONFIG_DRM_LOAD_EDID_FIRMWARE was introduced. It allows to provide an
 individually prepared or corrected EDID data set in the /lib/firmware
 directory from where it is loaded via the firmware interface. The code
 (see drivers/gpu/drm/drm_edid_load.c) contains built-in data sets for
-commonly used screen resolutions (1024x768, 1280x1024, 1680x1050,
-1920x1080) as binary blobs, but the kernel source tree does not contain
-code to create these data. In order to elucidate the origin of the
-built-in binary EDID blobs and to facilitate the creation of individual
-data for a specific misbehaving monitor, commented sources and a
-Makefile environment are given here.
+commonly used screen resolutions (1024x768, 1280x1024, 1600x1200,
+1680x1050, 1920x1080) as binary blobs, but the kernel source tree does
+not contain code to create these data. In order to elucidate the origin
+of the built-in binary EDID blobs and to facilitate the creation of
+individual data for a specific misbehaving monitor, commented sources
+and a Makefile environment are given here.
 
 To create binary EDID and C source code files from the existing data
 material, simply type "make".

Documentation/RCU/checklist.txt

@@ -217,9 +217,14 @@ over a rather long period of time, but improvements are always welcome!
 	whether the increased speed is worth it.
 
 8.	Although synchronize_rcu() is slower than is call_rcu(), it
-	usually results in simpler code.  So, unless update performance
-	is critically important or the updaters cannot block,
-	synchronize_rcu() should be used in preference to call_rcu().
+	usually results in simpler code.  So, unless update performance is
+	critically important, the updaters cannot block, or the latency of
+	synchronize_rcu() is visible from userspace, synchronize_rcu()
+	should be used in preference to call_rcu().  Furthermore,
+	kfree_rcu() usually results in even simpler code than does
+	synchronize_rcu() without synchronize_rcu()'s multi-millisecond
+	latency.  So please take advantage of kfree_rcu()'s "fire and
+	forget" memory-freeing capabilities where it applies.
 
 	An especially important property of the synchronize_rcu()
 	primitive is that it automatically self-limits: if grace periods
@@ -268,7 +273,8 @@ over a rather long period of time, but improvements are always welcome!
 	e.	Periodically invoke synchronize_rcu(), permitting a limited
 		number of updates per grace period.
 
-	The same cautions apply to call_rcu_bh() and call_rcu_sched().
+	The same cautions apply to call_rcu_bh(), call_rcu_sched(),
+	call_srcu(), and kfree_rcu().
 
 9.	All RCU list-traversal primitives, which include
 	rcu_dereference(), list_for_each_entry_rcu(), and
@@ -296,9 +302,9 @@ over a rather long period of time, but improvements are always welcome!
 	all currently executing rcu_read_lock()-protected RCU read-side
 	critical sections complete.  It does -not- necessarily guarantee
 	that all currently running interrupts, NMIs, preempt_disable()
-	code, or idle loops will complete.  Therefore, if you do not have
-	rcu_read_lock()-protected read-side critical sections, do -not-
-	use synchronize_rcu().
+	code, or idle loops will complete.  Therefore, if your
+	read-side critical sections are protected by something other
+	than rcu_read_lock(), do -not- use synchronize_rcu().
 
 	Similarly, disabling preemption is not an acceptable substitute
 	for rcu_read_lock().  Code that attempts to use preemption
@@ -401,9 +407,9 @@ over a rather long period of time, but improvements are always welcome!
 	read-side critical sections.  It is the responsibility of the
 	RCU update-side primitives to deal with this.
 
-17.	Use CONFIG_PROVE_RCU, CONFIG_DEBUG_OBJECTS_RCU_HEAD, and
-	the __rcu sparse checks to validate your RCU code.  These
-	can help find problems as follows:
+17.	Use CONFIG_PROVE_RCU, CONFIG_DEBUG_OBJECTS_RCU_HEAD, and the
+	__rcu sparse checks (enabled by CONFIG_SPARSE_RCU_POINTER) to
+	validate your RCU code.  These can help find problems as follows:
 
 	CONFIG_PROVE_RCU: check that accesses to RCU-protected data
 		structures are carried out under the proper RCU

Documentation/RCU/lockdep.txt

@@ -64,6 +64,11 @@ checking of rcu_dereference() primitives:
 		but retain the compiler constraints that prevent duplicating
 		or coalescsing.  This is useful when when testing the
 		value of the pointer itself, for example, against NULL.
+	rcu_access_index(idx):
+		Return the value of the index and omit all barriers, but
+		retain the compiler constraints that prevent duplicating
+		or coalescsing.  This is useful when when testing the
+		value of the index itself, for example, against -1.
 
 The rcu_dereference_check() check expression can be any boolean
 expression, but would normally include a lockdep expression.  However,

Documentation/RCU/rcubarrier.txt

@@ -79,7 +79,20 @@ complete. Pseudo-code using rcu_barrier() is as follows:
    2. Execute rcu_barrier().
    3. Allow the module to be unloaded.
 
-The rcutorture module makes use of rcu_barrier in its exit function
+There are also rcu_barrier_bh(), rcu_barrier_sched(), and srcu_barrier()
+functions for the other flavors of RCU, and you of course must match
+the flavor of rcu_barrier() with that of call_rcu().  If your module
+uses multiple flavors of call_rcu(), then it must also use multiple
+flavors of rcu_barrier() when unloading that module.  For example, if
+it uses call_rcu_bh(), call_srcu() on srcu_struct_1, and call_srcu() on
+srcu_struct_2(), then the following three lines of code will be required
+when unloading:
+
+ 1 rcu_barrier_bh();
+ 2 srcu_barrier(&srcu_struct_1);
+ 3 srcu_barrier(&srcu_struct_2);
+
+The rcutorture module makes use of rcu_barrier() in its exit function
 as follows:
 
  1 static void

Documentation/RCU/stallwarn.txt

@@ -92,14 +92,14 @@ If the CONFIG_RCU_CPU_STALL_INFO kernel configuration parameter is set,
 more information is printed with the stall-warning message, for example:
 
 	INFO: rcu_preempt detected stall on CPU
-	0: (63959 ticks this GP) idle=241/3fffffffffffffff/0
+	0: (63959 ticks this GP) idle=241/3fffffffffffffff/0 softirq=82/543
 	   (t=65000 jiffies)
 
 In kernels with CONFIG_RCU_FAST_NO_HZ, even more information is
 printed:
 
 	INFO: rcu_preempt detected stall on CPU
-	0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 drain=0 . timer not pending
+	0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 softirq=82/543 last_accelerate: a345/d342 nonlazy_posted: 25 .D
 	   (t=65000 jiffies)
 
 The "(64628 ticks this GP)" indicates that this CPU has taken more
@@ -116,13 +116,28 @@ number between the two "/"s is the value of the nesting, which will
 be a small positive number if in the idle loop and a very large positive
 number (as shown above) otherwise.
 
-For CONFIG_RCU_FAST_NO_HZ kernels, the "drain=0" indicates that the CPU is
-not in the process of trying to force itself into dyntick-idle state, the
-"." indicates that the CPU has not given up forcing RCU into dyntick-idle
-mode (it would be "H" otherwise), and the "timer not pending" indicates
-that the CPU has not recently forced RCU into dyntick-idle mode (it
-would otherwise indicate the number of microseconds remaining in this
-forced state).
+The "softirq=" portion of the message tracks the number of RCU softirq
+handlers that the stalled CPU has executed.  The number before the "/"
+is the number that had executed since boot at the time that this CPU
+last noted the beginning of a grace period, which might be the current
+(stalled) grace period, or it might be some earlier grace period (for
+example, if the CPU might have been in dyntick-idle mode for an extended
+time period.  The number after the "/" is the number that have executed
+since boot until the current time.  If this latter number stays constant
+across repeated stall-warning messages, it is possible that RCU's softirq
+handlers are no longer able to execute on this CPU.  This can happen if
+the stalled CPU is spinning with interrupts are disabled, or, in -rt
+kernels, if a high-priority process is starving RCU's softirq handler.
+
+For CONFIG_RCU_FAST_NO_HZ kernels, the "last_accelerate:" prints the
+low-order 16 bits (in hex) of the jiffies counter when this CPU last
+invoked rcu_try_advance_all_cbs() from rcu_needs_cpu() or last invoked
+rcu_accelerate_cbs() from rcu_prepare_for_idle().  The "nonlazy_posted:"
+prints the number of non-lazy callbacks posted since the last call to
+rcu_needs_cpu().  Finally, an "L" indicates that there are currently
+no non-lazy callbacks ("." is printed otherwise, as shown above) and
+"D" indicates that dyntick-idle processing is enabled ("." is printed
+otherwise, for example, if disabled via the "nohz=" kernel boot parameter).
 
 
 Multiple Warnings From One Stall
@@ -176,7 +191,7 @@ o	A CPU-bound real-time task in a CONFIG_PREEMPT_RT kernel that
 o	A hardware or software issue shuts off the scheduler-clock
 	interrupt on a CPU that is not in dyntick-idle mode.  This
 	problem really has happened, and seems to be most likely to
-	result in RCU CPU stall warnings for CONFIG_NO_HZ=n kernels.
+	result in RCU CPU stall warnings for CONFIG_NO_HZ_COMMON=n kernels.
 
 o	A bug in the RCU implementation.
 

Documentation/RCU/whatisRCU.txt

@@ -265,9 +265,9 @@ rcu_dereference()
 		rcu_read_lock();
 		p = rcu_dereference(head.next);
 		rcu_read_unlock();
-		x = p->address;
+		x = p->address;	/* BUG!!! */
 		rcu_read_lock();
-		y = p->data;
+		y = p->data;	/* BUG!!! */
 		rcu_read_unlock();
 
 	Holding a reference from one RCU read-side critical section

Documentation/SubmittingPatches

@@ -420,7 +420,7 @@ person it names.  This tag documents that potentially interested parties
 have been included in the discussion
 
 
-14) Using Reported-by:, Tested-by: and Reviewed-by:
+14) Using Reported-by:, Tested-by:, Reviewed-by: and Suggested-by:
 
 If this patch fixes a problem reported by somebody else, consider adding a
 Reported-by: tag to credit the reporter for their contribution.  Please
@@ -468,6 +468,13 @@ done on the patch.  Reviewed-by: tags, when supplied by reviewers known to
 understand the subject area and to perform thorough reviews, will normally
 increase the likelihood of your patch getting into the kernel.
 
+A Suggested-by: tag indicates that the patch idea is suggested by the person
+named and ensures credit to the person for the idea. Please note that this
+tag should not be added without the reporter's permission, especially if the
+idea was not posted in a public forum. That said, if we diligently credit our
+idea reporters, they will, hopefully, be inspired to help us again in the
+future.
+
 
 15) The canonical patch format
 

Documentation/acpi/enumeration.txt

@@ -66,6 +66,83 @@ the ACPI device explicitly to acpi_platform_device_ids list defined in
 drivers/acpi/acpi_platform.c. This limitation is only for the platform
 devices, SPI and I2C devices are created automatically as described below.
 
+DMA support
+~~~~~~~~~~~
+DMA controllers enumerated via ACPI should be registered in the system to
+provide generic access to their resources. For example, a driver that would
+like to be accessible to slave devices via generic API call
+dma_request_slave_channel() must register itself at the end of the probe
+function like this:
+
+	err = devm_acpi_dma_controller_register(dev, xlate_func, dw);
+	/* Handle the error if it's not a case of !CONFIG_ACPI */
+
+and implement custom xlate function if needed (usually acpi_dma_simple_xlate()
+is enough) which converts the FixedDMA resource provided by struct
+acpi_dma_spec into the corresponding DMA channel. A piece of code for that case
+could look like:
+
+	#ifdef CONFIG_ACPI
+	struct filter_args {
+		/* Provide necessary information for the filter_func */
+		...
+	};
+
+	static bool filter_func(struct dma_chan *chan, void *param)
+	{
+		/* Choose the proper channel */
+		...
+	}
+
+	static struct dma_chan *xlate_func(struct acpi_dma_spec *dma_spec,
+			struct acpi_dma *adma)
+	{
+		dma_cap_mask_t cap;
+		struct filter_args args;
+
+		/* Prepare arguments for filter_func */
+		...
+		return dma_request_channel(cap, filter_func, &args);
+	}
+	#else
+	static struct dma_chan *xlate_func(struct acpi_dma_spec *dma_spec,
+			struct acpi_dma *adma)
+	{
+		return NULL;
+	}
+	#endif
+
+dma_request_slave_channel() will call xlate_func() for each registered DMA
+controller. In the xlate function the proper channel must be chosen based on
+information in struct acpi_dma_spec and the properties of the controller
+provided by struct acpi_dma.
+
+Clients must call dma_request_slave_channel() with the string parameter that
+corresponds to a specific FixedDMA resource. By default "tx" means the first
+entry of the FixedDMA resource array, "rx" means the second entry. The table
+below shows a layout:
+
+	Device (I2C0)
+	{
+		...
+		Method (_CRS, 0, NotSerialized)
+		{
+			Name (DBUF, ResourceTemplate ()
+			{
+				FixedDMA (0x0018, 0x0004, Width32bit, _Y48)
+				FixedDMA (0x0019, 0x0005, Width32bit, )
+			})
+		...
+		}
+	}
+
+So, the FixedDMA with request line 0x0018 is "tx" and next one is "rx" in
+this example.
+
+In robust cases the client unfortunately needs to call
+acpi_dma_request_slave_chan_by_index() directly and therefore choose the
+specific FixedDMA resource by its index.
+
 SPI serial bus support
 ~~~~~~~~~~~~~~~~~~~~~~
 Slave devices behind SPI bus have SpiSerialBus resource attached to them.
@@ -199,6 +276,8 @@ the device to the driver. For example:
 	{
 		Name (SBUF, ResourceTemplate()
 		{
+			...
+			// Used to power on/off the device
 			GpioIo (Exclusive, PullDefault, 0x0000, 0x0000,
 				IoRestrictionOutputOnly, "\\_SB.PCI0.GPI0",
 				0x00, ResourceConsumer,,)
@@ -206,10 +285,20 @@ the device to the driver. For example:
 				// Pin List
 				0x0055
 			}
+
+			// Interrupt for the device
+			GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullNone,
+				 0x0000, "\\_SB.PCI0.GPI0", 0x00, ResourceConsumer,,)
+			{
+				// Pin list
+				0x0058
+			}
+
 			...
 
-			Return (SBUF)
 		}
+
+		Return (SBUF)
 	}
 
 These GPIO numbers are controller relative and path "\\_SB.PCI0.GPI0"
@@ -220,6 +309,24 @@ The driver can do this by including <linux/acpi_gpio.h> and then calling
 acpi_get_gpio(path, gpio). This will return the Linux GPIO number or
 negative errno if there was no translation found.
 
+In a simple case of just getting the Linux GPIO number from device
+resources one can use acpi_get_gpio_by_index() helper function. It takes
+pointer to the device and index of the GpioIo/GpioInt descriptor in the
+device resources list. For example:
+
+	int gpio_irq, gpio_power;
+	int ret;
+
+	gpio_irq = acpi_get_gpio_by_index(dev, 1, NULL);
+	if (gpio_irq < 0)
+		/* handle error */
+
+	gpio_power = acpi_get_gpio_by_index(dev, 0, NULL);
+	if (gpio_power < 0)
+		/* handle error */
+
+	/* Now we can use the GPIO numbers */
+
 Other GpioIo parameters must be converted first by the driver to be
 suitable to the gpiolib before passing them.
 

Documentation/arm/cluster-pm-race-avoidance.txt

+Cluster-wide Power-up/power-down race avoidance algorithm
+=========================================================
+
+This file documents the algorithm which is used to coordinate CPU and
+cluster setup and teardown operations and to manage hardware coherency
+controls safely.
+
+The section "Rationale" explains what the algorithm is for and why it is
+needed.  "Basic model" explains general concepts using a simplified view
+of the system.  The other sections explain the actual details of the
+algorithm in use.
+
+
+Rationale
+---------
+
+In a system containing multiple CPUs, it is desirable to have the
+ability to turn off individual CPUs when the system is idle, reducing
+power consumption and thermal dissipation.
+
+In a system containing multiple clusters of CPUs, it is also desirable
+to have the ability to turn off entire clusters.
+
+Turning entire clusters off and on is a risky business, because it
+involves performing potentially destructive operations affecting a group
+of independently running CPUs, while the OS continues to run.  This
+means that we need some coordination in order to ensure that critical
+cluster-level operations are only performed when it is truly safe to do
+so.
+
+Simple locking may not be sufficient to solve this problem, because
+mechanisms like Linux spinlocks may rely on coherency mechanisms which
+are not immediately enabled when a cluster powers up.  Since enabling or
+disabling those mechanisms may itself be a non-atomic operation (such as
+writing some hardware registers and invalidating large caches), other
+methods of coordination are required in order to guarantee safe
+power-down and power-up at the cluster level.
+
+The mechanism presented in this document describes a coherent memory
+based protocol for performing the needed coordination.  It aims to be as
+lightweight as possible, while providing the required safety properties.
+
+
+Basic model
+-----------
+
+Each cluster and CPU is assigned a state, as follows:
+
+	DOWN
+	COMING_UP
+	UP
+	GOING_DOWN
+
+	    +---------> UP ----------+
+	    |                        v
+
+	COMING_UP                GOING_DOWN
+
+	    ^                        |
+	    +--------- DOWN <--------+
+
+
+DOWN:	The CPU or cluster is not coherent, and is either powered off or
+	suspended, or is ready to be powered off or suspended.
+
+COMING_UP: The CPU or cluster has committed to moving to the UP state.
+	It may be part way through the process of initialisation and
+	enabling coherency.
+
+UP:	The CPU or cluster is active and coherent at the hardware
+	level.  A CPU in this state is not necessarily being used
+	actively by the kernel.
+
+GOING_DOWN: The CPU or cluster has committed to moving to the DOWN
+	state.  It may be part way through the process of teardown and
+	coherency exit.
+
+
+Each CPU has one of these states assigned to it at any point in time.
+The CPU states are described in the "CPU state" section, below.
+
+Each cluster is also assigned a state, but it is necessary to split the
+state value into two parts (the "cluster" state and "inbound" state) and
+to introduce additional states in order to avoid races between different
+CPUs in the cluster simultaneously modifying the state.  The cluster-
+level states are described in the "Cluster state" section.
+
+To help distinguish the CPU states from cluster states in this
+discussion, the state names are given a CPU_ prefix for the CPU states,
+and a CLUSTER_ or INBOUND_ prefix for the cluster states.
+
+
+CPU state
+---------
+
+In this algorithm, each individual core in a multi-core processor is
+referred to as a "CPU".  CPUs are assumed to be single-threaded:
+therefore, a CPU can only be doing one thing at a single point in time.
+
+This means that CPUs fit the basic model closely.
+
+The algorithm defines the following states for each CPU in the system:
+
+	CPU_DOWN
+	CPU_COMING_UP
+	CPU_UP
+	CPU_GOING_DOWN
+
+	 cluster setup and
+	CPU setup complete          policy decision
+	      +-----------> CPU_UP ------------+
+	      |                                v
+
+	CPU_COMING_UP                   CPU_GOING_DOWN
+
+	      ^                                |
+	      +----------- CPU_DOWN <----------+
+	 policy decision           CPU teardown complete
+	or hardware event
+
+
+The definitions of the four states correspond closely to the states of
+the basic model.
+
+Transitions between states occur as follows.
+
+A trigger event (spontaneous) means that the CPU can transition to the
+next state as a result of making local progress only, with no
+requirement for any external event to happen.
+
+
+CPU_DOWN:
+
+	A CPU reaches the CPU_DOWN state when it is ready for
+	power-down.  On reaching this state, the CPU will typically
+	power itself down or suspend itself, via a WFI instruction or a
+	firmware call.
+
+	Next state:	CPU_COMING_UP
+	Conditions:	none
+
+	Trigger events:
+
+		a) an explicit hardware power-up operation, resulting
+		   from a policy decision on another CPU;
+
+		b) a hardware event, such as an interrupt.
+
+
+CPU_COMING_UP:
+
+	A CPU cannot start participating in hardware coherency until the
+	cluster is set up and coherent.  If the cluster is not ready,
+	then the CPU will wait in the CPU_COMING_UP state until the
+	cluster has been set up.
+
+	Next state:	CPU_UP
+	Conditions:	The CPU's parent cluster must be in CLUSTER_UP.
+	Trigger events:	Transition of the parent cluster to CLUSTER_UP.
+
+	Refer to the "Cluster state" section for a description of the
+	CLUSTER_UP state.
+
+
+CPU_UP:
+	When a CPU reaches the CPU_UP state, it is safe for the CPU to
+	start participating in local coherency.
+
+	This is done by jumping to the kernel's CPU resume code.
+
+	Note that the definition of this state is slightly different
+	from the basic model definition: CPU_UP does not mean that the
+	CPU is coherent yet, but it does mean that it is safe to resume
+	the kernel.  The kernel handles the rest of the resume
+	procedure, so the remaining steps are not visible as part of the
+	race avoidance algorithm.
+
+	The CPU remains in this state until an explicit policy decision
+	is made to shut down or suspend the CPU.
+
+	Next state:	CPU_GOING_DOWN
+	Conditions:	none
+	Trigger events:	explicit policy decision
+
+
+CPU_GOING_DOWN:
+
+	While in this state, the CPU exits coherency, including any
+	operations required to achieve this (such as cleaning data
+	caches).
+
+	Next state:	CPU_DOWN
+	Conditions:	local CPU teardown complete
+	Trigger events:	(spontaneous)
+
+
+Cluster state
+-------------
+
+A cluster is a group of connected CPUs with some common resources.
+Because a cluster contains multiple CPUs, it can be doing multiple
+things at the same time.  This has some implications.  In particular, a
+CPU can start up while another CPU is tearing the cluster down.
+
+In this discussion, the "outbound side" is the view of the cluster state
+as seen by a CPU tearing the cluster down.  The "inbound side" is the
+view of the cluster state as seen by a CPU setting the CPU up.
+
+In order to enable safe coordination in such situations, it is important
+that a CPU which is setting up the cluster can advertise its state
+independently of the CPU which is tearing down the cluster.  For this
+reason, the cluster state is split into two parts:
+
+	"cluster" state: The global state of the cluster; or the state
+		on the outbound side:
+
+		CLUSTER_DOWN
+		CLUSTER_UP
+		CLUSTER_GOING_DOWN
+
+	"inbound" state: The state of the cluster on the inbound side.
+
+		INBOUND_NOT_COMING_UP
+		INBOUND_COMING_UP
+
+
+	The different pairings of these states results in six possible
+	states for the cluster as a whole:
+
+	                            CLUSTER_UP
+	          +==========> INBOUND_NOT_COMING_UP -------------+
+	          #                                               |
+	                                                          |
+	     CLUSTER_UP     <----+                                |
+	  INBOUND_COMING_UP      |                                v
+
+	          ^             CLUSTER_GOING_DOWN       CLUSTER_GOING_DOWN
+	          #              INBOUND_COMING_UP <=== INBOUND_NOT_COMING_UP
+
+	    CLUSTER_DOWN         |                                |
+	  INBOUND_COMING_UP <----+                                |
+	                                                          |
+	          ^                                               |
+	          +===========     CLUSTER_DOWN      <------------+
+	                       INBOUND_NOT_COMING_UP
+
+	Transitions -----> can only be made by the outbound CPU, and
+	only involve changes to the "cluster" state.
+
+	Transitions ===##> can only be made by the inbound CPU, and only
+	involve changes to the "inbound" state, except where there is no
+	further transition possible on the outbound side (i.e., the
+	outbound CPU has put the cluster into the CLUSTER_DOWN state).
+
+	The race avoidance algorithm does not provide a way to determine
+	which exact CPUs within the cluster play these roles.  This must
+	be decided in advance by some other means.  Refer to the section
+	"Last man and first man selection" for more explanation.
+
+
+	CLUSTER_DOWN/INBOUND_NOT_COMING_UP is the only state where the
+	cluster can actually be powered down.
+
+	The parallelism of the inbound and outbound CPUs is observed by
+	the existence of two different paths from CLUSTER_GOING_DOWN/
+	INBOUND_NOT_COMING_UP (corresponding to GOING_DOWN in the basic
+	model) to CLUSTER_DOWN/INBOUND_COMING_UP (corresponding to
+	COMING_UP in the basic model).  The second path avoids cluster
+	teardown completely.
+
+	CLUSTER_UP/INBOUND_COMING_UP is equivalent to UP in the basic
+	model.  The final transition to CLUSTER_UP/INBOUND_NOT_COMING_UP
+	is trivial and merely resets the state machine ready for the
+	next cycle.
+
+	Details of the allowable transitions follow.
+
+	The next state in each case is notated
+
+		<cluster state>/<inbound state> (<transitioner>)
+
+	where the <transitioner> is the side on which the transition
+	can occur; either the inbound or the outbound side.
+
+
+CLUSTER_DOWN/INBOUND_NOT_COMING_UP:
+
+	Next state:	CLUSTER_DOWN/INBOUND_COMING_UP (inbound)
+	Conditions:	none
+	Trigger events:
+
+		a) an explicit hardware power-up operation, resulting
+		   from a policy decision on another CPU;
+
+		b) a hardware event, such as an interrupt.
+
+
+CLUSTER_DOWN/INBOUND_COMING_UP:
+
+	In this state, an inbound CPU sets up the cluster, including
+	enabling of hardware coherency at the cluster level and any
+	other operations (such as cache invalidation) which are required
+	in order to achieve this.
+
+	The purpose of this state is to do sufficient cluster-level
+	setup to enable other CPUs in the cluster to enter coherency
+	safely.
+
+	Next state:	CLUSTER_UP/INBOUND_COMING_UP (inbound)
+	Conditions:	cluster-level setup and hardware coherency complete
+	Trigger events:	(spontaneous)
+
+
+CLUSTER_UP/INBOUND_COMING_UP:
+
+	Cluster-level setup is complete and hardware coherency is
+	enabled for the cluster.  Other CPUs in the cluster can safely
+	enter coherency.
+
+	This is a transient state, leading immediately to
+	CLUSTER_UP/INBOUND_NOT_COMING_UP.  All other CPUs on the cluster
+	should consider treat these two states as equivalent.
+
+	Next state:	CLUSTER_UP/INBOUND_NOT_COMING_UP (inbound)
+	Conditions:	none
+	Trigger events:	(spontaneous)
+
+
+CLUSTER_UP/INBOUND_NOT_COMING_UP:
+
+	Cluster-level setup is complete and hardware coherency is
+	enabled for the cluster.  Other CPUs in the cluster can safely
+	enter coherency.
+
+	The cluster will remain in this state until a policy decision is
+	made to power the cluster down.
+
+	Next state:	CLUSTER_GOING_DOWN/INBOUND_NOT_COMING_UP (outbound)
+	Conditions:	none
+	Trigger events:	policy decision to power down the cluster
+
+
+CLUSTER_GOING_DOWN/INBOUND_NOT_COMING_UP:
+
+	An outbound CPU is tearing the cluster down.  The selected CPU
+	must wait in this state until all CPUs in the cluster are in the
+	CPU_DOWN state.
+
+	When all CPUs are in the CPU_DOWN state, the cluster can be torn
+	down, for example by cleaning data caches and exiting
+	cluster-level coherency.
+
+	To avoid wasteful unnecessary teardown operations, the outbound
+	should check the inbound cluster state for asynchronous
+	transitions to INBOUND_COMING_UP.  Alternatively, individual
+	CPUs can be checked for entry into CPU_COMING_UP or CPU_UP.
+
+
+	Next states:
+
+	CLUSTER_DOWN/INBOUND_NOT_COMING_UP (outbound)
+		Conditions:	cluster torn down and ready to power off
+		Trigger events:	(spontaneous)
+
+	CLUSTER_GOING_DOWN/INBOUND_COMING_UP (inbound)
+		Conditions:	none
+		Trigger events:
+
+			a) an explicit hardware power-up operation,
+			   resulting from a policy decision on another
+			   CPU;
+
+			b) a hardware event, such as an interrupt.
+
+
+CLUSTER_GOING_DOWN/INBOUND_COMING_UP:
+
+	The cluster is (or was) being torn down, but another CPU has
+	come online in the meantime and is trying to set up the cluster
+	again.
+
+	If the outbound CPU observes this state, it has two choices:
+
+		a) back out of teardown, restoring the cluster to the
+		   CLUSTER_UP state;
+
+		b) finish tearing the cluster down and put the cluster
+		   in the CLUSTER_DOWN state; the inbound CPU will
+		   set up the cluster again from there.
+
+	Choice (a) permits the removal of some latency by avoiding
+	unnecessary teardown and setup operations in situations where
+	the cluster is not really going to be powered down.
+
+
+	Next states:
+
+	CLUSTER_UP/INBOUND_COMING_UP (outbound)
+		Conditions:	cluster-level setup and hardware
+				coherency complete
+		Trigger events:	(spontaneous)
+
+	CLUSTER_DOWN/INBOUND_COMING_UP (outbound)
+		Conditions:	cluster torn down and ready to power off
+		Trigger events:	(spontaneous)
+
+
+Last man and First man selection
+--------------------------------
+
+The CPU which performs cluster tear-down operations on the outbound side
+is commonly referred to as the "last man".
+
+The CPU which performs cluster setup on the inbound side is commonly
+referred to as the "first man".
+
+The race avoidance algorithm documented above does not provide a
+mechanism to choose which CPUs should play these roles.
+
+
+Last man:
+
+When shutting down the cluster, all the CPUs involved are initially
+executing Linux and hence coherent.  Therefore, ordinary spinlocks can
+be used to select a last man safely, before the CPUs become
+non-coherent.
+
+
+First man:
+
+Because CPUs may power up asynchronously in response to external wake-up
+events, a dynamic mechanism is needed to make sure that only one CPU
+attempts to play the first man role and do the cluster-level
+initialisation: any other CPUs must wait for this to complete before
+proceeding.
+
+Cluster-level initialisation may involve actions such as configuring
+coherency controls in the bus fabric.
+
+The current implementation in mcpm_head.S uses a separate mutual exclusion
+mechanism to do this arbitration.  This mechanism is documented in
+detail in vlocks.txt.
+
+
+Features and Limitations
+------------------------
+
+Implementation:
+
+	The current ARM-based implementation is split between
+	arch/arm/common/mcpm_head.S (low-level inbound CPU operations) and
+	arch/arm/common/mcpm_entry.c (everything else):
+
+	__mcpm_cpu_going_down() signals the transition of a CPU to the
+		CPU_GOING_DOWN state.
+
+	__mcpm_cpu_down() signals the transition of a CPU to the CPU_DOWN
+		state.
+
+	A CPU transitions to CPU_COMING_UP and then to CPU_UP via the
+		low-level power-up code in mcpm_head.S.  This could
+		involve CPU-specific setup code, but in the current
+		implementation it does not.
+
+	__mcpm_outbound_enter_critical() and __mcpm_outbound_leave_critical()
+		handle transitions from CLUSTER_UP to CLUSTER_GOING_DOWN
+		and from there to CLUSTER_DOWN or back to CLUSTER_UP (in
+		the case of an aborted cluster power-down).
+
+		These functions are more complex than the __mcpm_cpu_*()
+		functions due to the extra inter-CPU coordination which
+		is needed for safe transitions at the cluster level.
+
+	A cluster transitions from CLUSTER_DOWN back to CLUSTER_UP via
+		the low-level power-up code in mcpm_head.S.  This
+		typically involves platform-specific setup code,
+		provided by the platform-specific power_up_setup
+		function registered via mcpm_sync_init.
+
+Deep topologies:
+
+	As currently described and implemented, the algorithm does not
+	support CPU topologies involving more than two levels (i.e.,
+	clusters of clusters are not supported).  The algorithm could be
+	extended by replicating the cluster-level states for the
+	additional topological levels, and modifying the transition
+	rules for the intermediate (non-outermost) cluster levels.
+
+
+Colophon
+--------
+
+Originally created and documented by Dave Martin for Linaro Limited, in
+collaboration with Nicolas Pitre and Achin Gupta.
+
+Copyright (C) 2012-2013  Linaro Limited
+Distributed under the terms of Version 2 of the GNU General Public
+License, as defined in linux/COPYING.

Documentation/arm/firmware.txt

+Interface for registering and calling firmware-specific operations for ARM.
+----
+Written by Tomasz Figa <t.figa@samsung.com>
+
+Some boards are running with secure firmware running in TrustZone secure
+world, which changes the way some things have to be initialized. This makes
+a need to provide an interface for such platforms to specify available firmware
+operations and call them when needed.
+
+Firmware operations can be specified using struct firmware_ops
+
+	struct firmware_ops {
+		/*
+		* Enters CPU idle mode
+		*/
+		int (*do_idle)(void);
+		/*
+		* Sets boot address of specified physical CPU
+		*/
+		int (*set_cpu_boot_addr)(int cpu, unsigned long boot_addr);
+		/*
+		* Boots specified physical CPU
+		*/
+		int (*cpu_boot)(int cpu);
+		/*
+		* Initializes L2 cache
+		*/
+		int (*l2x0_init)(void);
+	};
+
+and then registered with register_firmware_ops function
+
+	void register_firmware_ops(const struct firmware_ops *ops)
+
+the ops pointer must be non-NULL.
+
+There is a default, empty set of operations provided, so there is no need to
+set anything if platform does not require firmware operations.
+
+To call a firmware operation, a helper macro is provided
+
+	#define call_firmware_op(op, ...)				\
+		((firmware_ops->op) ? firmware_ops->op(__VA_ARGS__) : (-ENOSYS))
+
+the macro checks if the operation is provided and calls it or otherwise returns
+-ENOSYS to signal that given operation is not available (for example, to allow
+fallback to legacy operation).
+
+Example of registering firmware operations:
+
+	/* board file */
+
+	static int platformX_do_idle(void)
+	{
+		/* tell platformX firmware to enter idle */
+		return 0;
+	}
+
+	static int platformX_cpu_boot(int i)
+	{
+		/* tell platformX firmware to boot CPU i */
+		return 0;
+	}
+
+	static const struct firmware_ops platformX_firmware_ops = {
+		.do_idle        = exynos_do_idle,
+		.cpu_boot       = exynos_cpu_boot,
+		/* other operations not available on platformX */
+	};
+
+	/* init_early callback of machine descriptor */
+	static void __init board_init_early(void)
+	{
+		register_firmware_ops(&platformX_firmware_ops);
+	}
+
+Example of using a firmware operation:
+
+	/* some platform code, e.g. SMP initialization */
+
+	__raw_writel(virt_to_phys(exynos4_secondary_startup),
+		CPU1_BOOT_REG);
+
+	/* Call Exynos specific smc call */
+	if (call_firmware_op(cpu_boot, cpu) == -ENOSYS)
+		cpu_boot_legacy(...); /* Try legacy way */
+
+	gic_raise_softirq(cpumask_of(cpu), 1);

Documentation/arm/sunxi/clocks.txt

+Frequently asked questions about the sunxi clock system
+=======================================================
+
+This document contains useful bits of information that people tend to ask
+about the sunxi clock system, as well as accompanying ASCII art when adequate.
+
+Q: Why is the main 24MHz oscillator gatable? Wouldn't that break the
+   system?
+
+A: The 24MHz oscillator allows gating to save power. Indeed, if gated
+   carelessly the system would stop functioning, but with the right
+   steps, one can gate it and keep the system running. Consider this
+   simplified suspend example:
+
+   While the system is operational, you would see something like
+
+      24MHz         32kHz
+       |
+      PLL1
+       \
+        \_ CPU Mux
+             |
+           [CPU]
+
+   When you are about to suspend, you switch the CPU Mux to the 32kHz
+   oscillator:
+
+      24Mhz         32kHz
+       |              |
+      PLL1            |
+                     /
+           CPU Mux _/
+             |
+           [CPU]
+
+    Finally you can gate the main oscillator
+
+                    32kHz
+                      |
+                      |
+                     /
+           CPU Mux _/
+             |
+           [CPU]
+
+Q: Were can I learn more about the sunxi clocks?
+
+A: The linux-sunxi wiki contains a page documenting the clock registers,
+   you can find it at
+
+        http://linux-sunxi.org/A10/CCM
+
+   The authoritative source for information at this time is the ccmu driver
+   released by Allwinner, you can find it at
+
+        https://github.com/linux-sunxi/linux-sunxi/tree/sunxi-3.0/arch/arm/mach-sun4i/clock/ccmu

Documentation/arm/vlocks.txt

+vlocks for Bare-Metal Mutual Exclusion
+======================================
+
+Voting Locks, or "vlocks" provide a simple low-level mutual exclusion
+mechanism, with reasonable but minimal requirements on the memory
+system.
+
+These are intended to be used to coordinate critical activity among CPUs
+which are otherwise non-coherent, in situations where the hardware
+provides no other mechanism to support this and ordinary spinlocks
+cannot be used.
+
+
+vlocks make use of the atomicity provided by the memory system for
+writes to a single memory location.  To arbitrate, every CPU "votes for
+itself", by storing a unique number to a common memory location.  The
+final value seen in that memory location when all the votes have been
+cast identifies the winner.
+
+In order to make sure that the election produces an unambiguous result
+in finite time, a CPU will only enter the election in the first place if
+no winner has been chosen and the election does not appear to have
+started yet.
+
+
+Algorithm
+---------
+
+The easiest way to explain the vlocks algorithm is with some pseudo-code:
+
+
+	int currently_voting[NR_CPUS] = { 0, };
+	int last_vote = -1; /* no votes yet */
+
+	bool vlock_trylock(int this_cpu)
+	{
+		/* signal our desire to vote */
+		currently_voting[this_cpu] = 1;
+		if (last_vote != -1) {
+			/* someone already volunteered himself */
+			currently_voting[this_cpu] = 0;
+			return false; /* not ourself */
+		}
+
+		/* let's suggest ourself */
+		last_vote = this_cpu;
+		currently_voting[this_cpu] = 0;
+
+		/* then wait until everyone else is done voting */
+		for_each_cpu(i) {
+			while (currently_voting[i] != 0)
+				/* wait */;
+		}
+
+		/* result */
+		if (last_vote == this_cpu)
+			return true; /* we won */
+		return false;
+	}
+
+	bool vlock_unlock(void)
+	{
+		last_vote = -1;
+	}
+
+
+The currently_voting[] array provides a way for the CPUs to determine
+whether an election is in progress, and plays a role analogous to the
+"entering" array in Lamport's bakery algorithm [1].
+
+However, once the election has started, the underlying memory system
+atomicity is used to pick the winner.  This avoids the need for a static
+priority rule to act as a tie-breaker, or any counters which could
+overflow.
+
+As long as the last_vote variable is globally visible to all CPUs, it
+will contain only one value that won't change once every CPU has cleared
+its currently_voting flag.
+
+
+Features and limitations
+------------------------
+
+ * vlocks are not intended to be fair.  In the contended case, it is the
+   _last_ CPU which attempts to get the lock which will be most likely
+   to win.
+
+   vlocks are therefore best suited to situations where it is necessary
+   to pick a unique winner, but it does not matter which CPU actually
+   wins.
+
+ * Like other similar mechanisms, vlocks will not scale well to a large
+   number of CPUs.
+
+   vlocks can be cascaded in a voting hierarchy to permit better scaling
+   if necessary, as in the following hypothetical example for 4096 CPUs:
+
+	/* first level: local election */
+	my_town = towns[(this_cpu >> 4) & 0xf];
+	I_won = vlock_trylock(my_town, this_cpu & 0xf);
+	if (I_won) {
+		/* we won the town election, let's go for the state */
+		my_state = states[(this_cpu >> 8) & 0xf];
+		I_won = vlock_lock(my_state, this_cpu & 0xf));
+		if (I_won) {
+			/* and so on */
+			I_won = vlock_lock(the_whole_country, this_cpu & 0xf];
+			if (I_won) {
+				/* ... */
+			}
+			vlock_unlock(the_whole_country);
+		}
+		vlock_unlock(my_state);
+	}
+	vlock_unlock(my_town);
+
+
+ARM implementation
+------------------
+
+The current ARM implementation [2] contains some optimisations beyond
+the basic algorithm:
+
+ * By packing the members of the currently_voting array close together,
+   we can read the whole array in one transaction (providing the number
+   of CPUs potentially contending the lock is small enough).  This
+   reduces the number of round-trips required to external memory.
+
+   In the ARM implementation, this means that we can use a single load
+   and comparison:
+
+	LDR	Rt, [Rn]
+	CMP	Rt, #0
+
+   ...in place of code equivalent to:
+
+	LDRB	Rt, [Rn]
+	CMP	Rt, #0
+	LDRBEQ	Rt, [Rn, #1]
+	CMPEQ	Rt, #0
+	LDRBEQ	Rt, [Rn, #2]
+	CMPEQ	Rt, #0
+	LDRBEQ	Rt, [Rn, #3]
+	CMPEQ	Rt, #0
+
+   This cuts down on the fast-path latency, as well as potentially
+   reducing bus contention in contended cases.
+
+   The optimisation relies on the fact that the ARM memory system
+   guarantees coherency between overlapping memory accesses of
+   different sizes, similarly to many other architectures.  Note that
+   we do not care which element of currently_voting appears in which
+   bits of Rt, so there is no need to worry about endianness in this
+   optimisation.
+
+   If there are too many CPUs to read the currently_voting array in
+   one transaction then multiple transations are still required.  The
+   implementation uses a simple loop of word-sized loads for this
+   case.  The number of transactions is still fewer than would be
+   required if bytes were loaded individually.
+
+
+   In principle, we could aggregate further by using LDRD or LDM, but
+   to keep the code simple this was not attempted in the initial
+   implementation.
+
+
+ * vlocks are currently only used to coordinate between CPUs which are
+   unable to enable their caches yet.  This means that the
+   implementation removes many of the barriers which would be required
+   when executing the algorithm in cached memory.
+
+   packing of the currently_voting array does not work with cached
+   memory unless all CPUs contending the lock are cache-coherent, due
+   to cache writebacks from one CPU clobbering values written by other
+   CPUs.  (Though if all the CPUs are cache-coherent, you should be
+   probably be using proper spinlocks instead anyway).
+
+
+ * The "no votes yet" value used for the last_vote variable is 0 (not
+   -1 as in the pseudocode).  This allows statically-allocated vlocks
+   to be implicitly initialised to an unlocked state simply by putting
+   them in .bss.
+
+   An offset is added to each CPU's ID for the purpose of setting this
+   variable, so that no CPU uses the value 0 for its ID.
+
+
+Colophon
+--------
+
+Originally created and documented by Dave Martin for Linaro Limited, for
+use in ARM-based big.LITTLE platforms, with review and input gratefully
+received from Nicolas Pitre and Achin Gupta.  Thanks to Nicolas for
+grabbing most of this text out of the relevant mail thread and writing
+up the pseudocode.
+
+Copyright (C) 2012-2013  Linaro Limited
+Distributed under the terms of Version 2 of the GNU General Public
+License, as defined in linux/COPYING.
+
+
+References
+----------
+
+[1] Lamport, L. "A New Solution of Dijkstra's Concurrent Programming
+    Problem", Communications of the ACM 17, 8 (August 1974), 453-455.
+
+    http://en.wikipedia.org/wiki/Lamport%27s_bakery_algorithm
+
+[2] linux/arch/arm/common/vlock.S, www.kernel.org.

Documentation/backlight/lp855x-driver.txt

@@ -32,14 +32,10 @@ Platform data for lp855x
 For supporting platform specific data, the lp855x platform data can be used.
 
 * name : Backlight driver name. If it is not defined, default name is set.
-* mode : Brightness control mode. PWM or register based.
 * device_control : Value of DEVICE CONTROL register.
 * initial_brightness : Initial value of backlight brightness.
 * period_ns : Platform specific PWM period value. unit is nano.
 	     Only valid when brightness is pwm input mode.
-* load_new_rom_data :
-	0 : use default configuration data
-	1 : update values of eeprom or eprom registers on loading driver
 * size_program : Total size of lp855x_rom_data.
 * rom_data : List of new eeprom/eprom registers.
 
@@ -54,10 +50,8 @@ static struct lp855x_rom_data lp8552_eeprom_arr[] = {
 
 static struct lp855x_platform_data lp8552_pdata = {
 	.name = "lcd-bl",
-	.mode = REGISTER_BASED,
 	.device_control = I2C_CONFIG(LP8552),
 	.initial_brightness = INITIAL_BRT,
-	.load_new_rom_data = 1,
 	.size_program = ARRAY_SIZE(lp8552_eeprom_arr),
 	.rom_data = lp8552_eeprom_arr,
 };
@@ -65,7 +59,6 @@ static struct lp855x_platform_data lp8552_pdata = {
 example 2) lp8556 platform data : pwm input mode with default rom data
 
 static struct lp855x_platform_data lp8556_pdata = {
-	.mode = PWM_BASED,
 	.device_control = PWM_CONFIG(LP8556),
 	.initial_brightness = INITIAL_BRT,
 	.period_ns = 1000000,

Documentation/bcache.txt

+Say you've got a big slow raid 6, and an X-25E or three. Wouldn't it be
+nice if you could use them as cache... Hence bcache.
+
+Wiki and git repositories are at:
+  http://bcache.evilpiepirate.org
+  http://evilpiepirate.org/git/linux-bcache.git
+  http://evilpiepirate.org/git/bcache-tools.git
+
+It's designed around the performance characteristics of SSDs - it only allocates
+in erase block sized buckets, and it uses a hybrid btree/log to track cached
+extants (which can be anywhere from a single sector to the bucket size). It's
+designed to avoid random writes at all costs; it fills up an erase block
+sequentially, then issues a discard before reusing it.
+
+Both writethrough and writeback caching are supported. Writeback defaults to
+off, but can be switched on and off arbitrarily at runtime. Bcache goes to
+great lengths to protect your data - it reliably handles unclean shutdown. (It
+doesn't even have a notion of a clean shutdown; bcache simply doesn't return
+writes as completed until they're on stable storage).
+
+Writeback caching can use most of the cache for buffering writes - writing
+dirty data to the backing device is always done sequentially, scanning from the
+start to the end of the index.
+
+Since random IO is what SSDs excel at, there generally won't be much benefit
+to caching large sequential IO. Bcache detects sequential IO and skips it;
+it also keeps a rolling average of the IO sizes per task, and as long as the
+average is above the cutoff it will skip all IO from that task - instead of
+caching the first 512k after every seek. Backups and large file copies should
+thus entirely bypass the cache.
+
+In the event of a data IO error on the flash it will try to recover by reading
+from disk or invalidating cache entries.  For unrecoverable errors (meta data
+or dirty data), caching is automatically disabled; if dirty data was present
+in the cache it first disables writeback caching and waits for all dirty data
+to be flushed.
+
+Getting started:
+You'll need make-bcache from the bcache-tools repository. Both the cache device
+and backing device must be formatted before use.
+  make-bcache -B /dev/sdb
+  make-bcache -C /dev/sdc
+
+make-bcache has the ability to format multiple devices at the same time - if
+you format your backing devices and cache device at the same time, you won't
+have to manually attach:
+  make-bcache -B /dev/sda /dev/sdb -C /dev/sdc
+
+To make bcache devices known to the kernel, echo them to /sys/fs/bcache/register:
+
+  echo /dev/sdb > /sys/fs/bcache/register
+  echo /dev/sdc > /sys/fs/bcache/register
+
+To register your bcache devices automatically, you could add something like
+this to an init script:
+
+  echo /dev/sd* > /sys/fs/bcache/register_quiet
+
+It'll look for bcache superblocks and ignore everything that doesn't have one.
+
+Registering the backing device makes the bcache show up in /dev; you can now
+format it and use it as normal. But the first time using a new bcache device,
+it'll be running in passthrough mode until you attach it to a cache. See the
+section on attaching.
+
+The devices show up at /dev/bcacheN, and can be controlled via sysfs from
+/sys/block/bcacheN/bcache:
+
+  mkfs.ext4 /dev/bcache0
+  mount /dev/bcache0 /mnt
+
+Cache devices are managed as sets; multiple caches per set isn't supported yet
+but will allow for mirroring of metadata and dirty data in the future. Your new
+cache set shows up as /sys/fs/bcache/<UUID>
+
+ATTACHING:
+
+After your cache device and backing device are registered, the backing device
+must be attached to your cache set to enable caching. Attaching a backing
+device to a cache set is done thusly, with the UUID of the cache set in
+/sys/fs/bcache:
+
+  echo <UUID> > /sys/block/bcache0/bcache/attach
+
+This only has to be done once. The next time you reboot, just reregister all
+your bcache devices. If a backing device has data in a cache somewhere, the
+/dev/bcache# device won't be created until the cache shows up - particularly
+important if you have writeback caching turned on.
+
+If you're booting up and your cache device is gone and never coming back, you
+can force run the backing device:
+
+  echo 1 > /sys/block/sdb/bcache/running
+
+(You need to use /sys/block/sdb (or whatever your backing device is called), not
+/sys/block/bcache0, because bcache0 doesn't exist yet. If you're using a
+partition, the bcache directory would be at /sys/block/sdb/sdb2/bcache)
+
+The backing device will still use that cache set if it shows up in the future,
+but all the cached data will be invalidated. If there was dirty data in the
+cache, don't expect the filesystem to be recoverable - you will have massive
+filesystem corruption, though ext4's fsck does work miracles.
+
+ERROR HANDLING:
+
+Bcache tries to transparently handle IO errors to/from the cache device without
+affecting normal operation; if it sees too many errors (the threshold is
+configurable, and defaults to 0) it shuts down the cache device and switches all
+the backing devices to passthrough mode.
+
+ - For reads from the cache, if they error we just retry the read from the
+   backing device.
+
+ - For writethrough writes, if the write to the cache errors we just switch to
+   invalidating the data at that lba in the cache (i.e. the same thing we do for
+   a write that bypasses the cache)
+
+ - For writeback writes, we currently pass that error back up to the
+   filesystem/userspace. This could be improved - we could retry it as a write
+   that skips the cache so we don't have to error the write.
+
+ - When we detach, we first try to flush any dirty data (if we were running in
+   writeback mode). It currently doesn't do anything intelligent if it fails to
+   read some of the dirty data, though.
+
+TROUBLESHOOTING PERFORMANCE:
+
+Bcache has a bunch of config options and tunables. The defaults are intended to
+be reasonable for typical desktop and server workloads, but they're not what you
+want for getting the best possible numbers when benchmarking.
+
+ - Bad write performance
+
+   If write performance is not what you expected, you probably wanted to be
+   running in writeback mode, which isn't the default (not due to a lack of
+   maturity, but simply because in writeback mode you'll lose data if something
+   happens to your SSD)
+
+   # echo writeback > /sys/block/bcache0/cache_mode
+
+ - Bad performance, or traffic not going to the SSD that you'd expect
+
+   By default, bcache doesn't cache everything. It tries to skip sequential IO -
+   because you really want to be caching the random IO, and if you copy a 10
+   gigabyte file you probably don't want that pushing 10 gigabytes of randomly
+   accessed data out of your cache.
+
+   But if you want to benchmark reads from cache, and you start out with fio
+   writing an 8 gigabyte test file - so you want to disable that.
+
+   # echo 0 > /sys/block/bcache0/bcache/sequential_cutoff
+
+   To set it back to the default (4 mb), do
+
+   # echo 4M > /sys/block/bcache0/bcache/sequential_cutoff
+
+ - Traffic's still going to the spindle/still getting cache misses
+
+   In the real world, SSDs don't always keep up with disks - particularly with
+   slower SSDs, many disks being cached by one SSD, or mostly sequential IO. So
+   you want to avoid being bottlenecked by the SSD and having it slow everything
+   down.
+
+   To avoid that bcache tracks latency to the cache device, and gradually
+   throttles traffic if the latency exceeds a threshold (it does this by
+   cranking down the sequential bypass).
+
+   You can disable this if you need to by setting the thresholds to 0:
+
+   # echo 0 > /sys/fs/bcache/<cache set>/congested_read_threshold_us
+   # echo 0 > /sys/fs/bcache/<cache set>/congested_write_threshold_us
+
+   The default is 2000 us (2 milliseconds) for reads, and 20000 for writes.
+
+ - Still getting cache misses, of the same data
+
+   One last issue that sometimes trips people up is actually an old bug, due to
+   the way cache coherency is handled for cache misses. If a btree node is full,
+   a cache miss won't be able to insert a key for the new data and the data
+   won't be written to the cache.
+
+   In practice this isn't an issue because as soon as a write comes along it'll
+   cause the btree node to be split, and you need almost no write traffic for
+   this to not show up enough to be noticable (especially since bcache's btree
+   nodes are huge and index large regions of the device). But when you're
+   benchmarking, if you're trying to warm the cache by reading a bunch of data
+   and there's no other traffic - that can be a problem.
+
+   Solution: warm the cache by doing writes, or use the testing branch (there's
+   a fix for the issue there).
+
+SYSFS - BACKING DEVICE:
+
+attach
+  Echo the UUID of a cache set to this file to enable caching.
+
+cache_mode
+  Can be one of either writethrough, writeback, writearound or none.
+
+clear_stats
+  Writing to this file resets the running total stats (not the day/hour/5 minute
+  decaying versions).
+
+detach
+  Write to this file to detach from a cache set. If there is dirty data in the
+  cache, it will be flushed first.
+
+dirty_data
+  Amount of dirty data for this backing device in the cache. Continuously
+  updated unlike the cache set's version, but may be slightly off.
+
+label
+  Name of underlying device.
+
+readahead
+  Size of readahead that should be performed.  Defaults to 0.  If set to e.g.
+  1M, it will round cache miss reads up to that size, but without overlapping
+  existing cache entries.
+
+running
+  1 if bcache is running (i.e. whether the /dev/bcache device exists, whether
+  it's in passthrough mode or caching).
+
+sequential_cutoff
+  A sequential IO will bypass the cache once it passes this threshhold; the
+  most recent 128 IOs are tracked so sequential IO can be detected even when
+  it isn't all done at once.
+
+sequential_merge
+  If non zero, bcache keeps a list of the last 128 requests submitted to compare
+  against all new requests to determine which new requests are sequential
+  continuations of previous requests for the purpose of determining sequential
+  cutoff. This is necessary if the sequential cutoff value is greater than the
+  maximum acceptable sequential size for any single request. 
+
+state
+  The backing device can be in one of four different states:
+
+  no cache: Has never been attached to a cache set.
+
+  clean: Part of a cache set, and there is no cached dirty data.
+
+  dirty: Part of a cache set, and there is cached dirty data.
+
+  inconsistent: The backing device was forcibly run by the user when there was
+  dirty data cached but the cache set was unavailable; whatever data was on the
+  backing device has likely been corrupted.
+
+stop
+  Write to this file to shut down the bcache device and close the backing
+  device.
+
+writeback_delay
+  When dirty data is written to the cache and it previously did not contain
+  any, waits some number of seconds before initiating writeback. Defaults to
+  30.
+
+writeback_percent
+  If nonzero, bcache tries to keep around this percentage of the cache dirty by
+  throttling background writeback and using a PD controller to smoothly adjust
+  the rate.
+
+writeback_rate
+  Rate in sectors per second - if writeback_percent is nonzero, background
+  writeback is throttled to this rate. Continuously adjusted by bcache but may
+  also be set by the user.
+
+writeback_running
+  If off, writeback of dirty data will not take place at all. Dirty data will
+  still be added to the cache until it is mostly full; only meant for
+  benchmarking. Defaults to on.
+
+SYSFS - BACKING DEVICE STATS:
+
+There are directories with these numbers for a running total, as well as
+versions that decay over the past day, hour and 5 minutes; they're also
+aggregated in the cache set directory as well.
+
+bypassed
+  Amount of IO (both reads and writes) that has bypassed the cache
+
+cache_hits
+cache_misses
+cache_hit_ratio
+  Hits and misses are counted per individual IO as bcache sees them; a
+  partial hit is counted as a miss.
+
+cache_bypass_hits
+cache_bypass_misses
+  Hits and misses for IO that is intended to skip the cache are still counted,
+  but broken out here.
+
+cache_miss_collisions
+  Counts instances where data was going to be inserted into the cache from a
+  cache miss, but raced with a write and data was already present (usually 0
+  since the synchronization for cache misses was rewritten)
+
+cache_readaheads
+  Count of times readahead occured.
+
+SYSFS - CACHE SET:
+
+average_key_size
+  Average data per key in the btree.
+
+bdev<0..n>
+  Symlink to each of the attached backing devices.
+
+block_size
+  Block size of the cache devices.
+
+btree_cache_size
+  Amount of memory currently used by the btree cache
+
+bucket_size
+  Size of buckets
+
+cache<0..n>
+  Symlink to each of the cache devices comprising this cache set. 
+
+cache_available_percent
+  Percentage of cache device free.
+
+clear_stats
+  Clears the statistics associated with this cache
+
+dirty_data
+  Amount of dirty data is in the cache (updated when garbage collection runs).
+
+flash_vol_create
+  Echoing a size to this file (in human readable units, k/M/G) creates a thinly
+  provisioned volume backed by the cache set.
+
+io_error_halflife
+io_error_limit
+  These determines how many errors we accept before disabling the cache.
+  Each error is decayed by the half life (in # ios).  If the decaying count
+  reaches io_error_limit dirty data is written out and the cache is disabled.
+
+journal_delay_ms
+  Journal writes will delay for up to this many milliseconds, unless a cache
+  flush happens sooner. Defaults to 100.
+
+root_usage_percent
+  Percentage of the root btree node in use.  If this gets too high the node
+  will split, increasing the tree depth.
+
+stop
+  Write to this file to shut down the cache set - waits until all attached
+  backing devices have been shut down.
+
+tree_depth
+  Depth of the btree (A single node btree has depth 0).
+
+unregister
+  Detaches all backing devices and closes the cache devices; if dirty data is
+  present it will disable writeback caching and wait for it to be flushed.
+
+SYSFS - CACHE SET INTERNAL:
+
+This directory also exposes timings for a number of internal operations, with
+separate files for average duration, average frequency, last occurence and max
+duration: garbage collection, btree read, btree node sorts and btree splits.
+
+active_journal_entries
+  Number of journal entries that are newer than the index.
+
+btree_nodes
+  Total nodes in the btree.
+
+btree_used_percent
+  Average fraction of btree in use.
+
+bset_tree_stats
+  Statistics about the auxiliary search trees
+
+btree_cache_max_chain
+  Longest chain in the btree node cache's hash table
+
+cache_read_races
+  Counts instances where while data was being read from the cache, the bucket
+  was reused and invalidated - i.e. where the pointer was stale after the read
+  completed. When this occurs the data is reread from the backing device.
+
+trigger_gc
+  Writing to this file forces garbage collection to run.
+
+SYSFS - CACHE DEVICE:
+
+block_size
+  Minimum granularity of writes - should match hardware sector size.
+
+btree_written
+  Sum of all btree writes, in (kilo/mega/giga) bytes
+
+bucket_size
+  Size of buckets
+
+cache_replacement_policy
+  One of either lru, fifo or random.
+
+discard
+  Boolean; if on a discard/TRIM will be issued to each bucket before it is
+  reused. Defaults to off, since SATA TRIM is an unqueued command (and thus
+  slow).
+
+freelist_percent
+  Size of the freelist as a percentage of nbuckets. Can be written to to
+  increase the number of buckets kept on the freelist, which lets you
+  artificially reduce the size of the cache at runtime. Mostly for testing
+  purposes (i.e. testing how different size caches affect your hit rate), but
+  since buckets are discarded when they move on to the freelist will also make
+  the SSD's garbage collection easier by effectively giving it more reserved
+  space.
+
+io_errors
+  Number of errors that have occured, decayed by io_error_halflife.
+
+metadata_written
+  Sum of all non data writes (btree writes and all other metadata).
+
+nbuckets
+  Total buckets in this cache
+
+priority_stats
+  Statistics about how recently data in the cache has been accessed.  This can
+  reveal your working set size.
+
+written
+  Sum of all data that has been written to the cache; comparison with
+  btree_written gives the amount of write inflation in bcache.

Documentation/block/cfq-iosched.txt

@@ -5,7 +5,7 @@ The main aim of CFQ scheduler is to provide a fair allocation of the disk
 I/O bandwidth for all the processes which requests an I/O operation.
 
 CFQ maintains the per process queue for the processes which request I/O
-operation(syncronous requests). In case of asynchronous requests, all the
+operation(synchronous requests). In case of asynchronous requests, all the
 requests from all the processes are batched together according to their
 process's I/O priority.
 
@@ -66,6 +66,47 @@ This parameter is used to set the timeout of synchronous requests. Default
 value of this is 124ms. In case to favor synchronous requests over asynchronous
 one, this value should be decreased relative to fifo_expire_async.
 
+group_idle
+-----------
+This parameter forces idling at the CFQ group level instead of CFQ
+queue level. This was introduced after after a bottleneck was observed
+in higher end storage due to idle on sequential queue and allow dispatch
+from a single queue. The idea with this parameter is that it can be run with
+slice_idle=0 and group_idle=8, so that idling does not happen on individual
+queues in the group but happens overall on the group and thus still keeps the
+IO controller working.
+Not idling on individual queues in the group will dispatch requests from
+multiple queues in the group at the same time and achieve higher throughput
+on higher end storage.
+
+Default value for this parameter is 8ms.
+
+latency
+-------
+This parameter is used to enable/disable the latency mode of the CFQ
+scheduler. If latency mode (called low_latency) is enabled, CFQ tries
+to recompute the slice time for each process based on the target_latency set
+for the system. This favors fairness over throughput. Disabling low
+latency (setting it to 0) ignores target latency, allowing each process in the
+system to get a full time slice.
+
+By default low latency mode is enabled.
+
+target_latency
+--------------
+This parameter is used to calculate the time slice for a process if cfq's
+latency mode is enabled. It will ensure that sync requests have an estimated
+latency. But if sequential workload is higher(e.g. sequential read),
+then to meet the latency constraints, throughput may decrease because of less
+time for each process to issue I/O request before the cfq queue is switched.
+
+Though this can be overcome by disabling the latency_mode, it may increase
+the read latency for some applications. This parameter allows for changing
+target_latency through the sysfs interface which can provide the balanced
+throughput and read latency.
+
+Default value for target_latency is 300ms.
+
 slice_async
 -----------
 This parameter is same as of slice_sync but for asynchronous queue. The
@@ -98,8 +139,8 @@ in the device exceeds this parameter. This parameter is used for synchronous
 request.
 
 In case of storage with several disk, this setting can limit the parallel
-processing of request. Therefore, increasing the value can imporve the
-performace although this can cause the latency of some I/O to increase due
+processing of request. Therefore, increasing the value can improve the
+performance although this can cause the latency of some I/O to increase due
 to more number of requests.
 
 CFQ Group scheduling

Documentation/cgroups/00-INDEX

@@ -18,6 +18,8 @@ memcg_test.txt
 	- Memory Resource Controller; implementation details.
 memory.txt
 	- Memory Resource Controller; design, accounting, interface, testing.
+net_cls.txt
+	- Network classifier cgroups details and usages.
 net_prio.txt
 	- Network priority cgroups details and usages.
 resource_counter.txt

Documentation/cgroups/cgroups.txt

@@ -442,7 +442,7 @@ You can attach the current shell task by echoing 0:
 You can use the cgroup.procs file instead of the tasks file to move all
 threads in a threadgroup at once. Echoing the PID of any task in a
 threadgroup to cgroup.procs causes all tasks in that threadgroup to be
-be attached to the cgroup. Writing 0 to cgroup.procs moves all tasks
+attached to the cgroup. Writing 0 to cgroup.procs moves all tasks
 in the writing task's threadgroup.
 
 Note: Since every task is always a member of exactly one cgroup in each
@@ -580,6 +580,7 @@ propagation along the hierarchy. See the comment on
 cgroup_for_each_descendant_pre() for details.
 
 void css_offline(struct cgroup *cgrp);
+(cgroup_mutex held by caller)
 
 This is the counterpart of css_online() and called iff css_online()
 has succeeded on @cgrp. This signifies the beginning of the end of

Documentation/cgroups/devices.txt

@@ -13,9 +13,7 @@ either an integer or * for all.  Access is a composition of r
 The root device cgroup starts with rwm to 'all'.  A child device
 cgroup gets a copy of the parent.  Administrators can then remove
 devices from the whitelist or add new entries.  A child cgroup can
-never receive a device access which is denied by its parent.  However
-when a device access is removed from a parent it will not also be
-removed from the child(ren).
+never receive a device access which is denied by its parent.
 
 2. User Interface
 
@@ -50,3 +48,69 @@ task to a new cgroup.  (Again we'll probably want to change that).
 
 A cgroup may not be granted more permissions than the cgroup's
 parent has.
+
+4. Hierarchy
+
+device cgroups maintain hierarchy by making sure a cgroup never has more
+access permissions than its parent.  Every time an entry is written to
+a cgroup's devices.deny file, all its children will have that entry removed
+from their whitelist and all the locally set whitelist entries will be
+re-evaluated.  In case one of the locally set whitelist entries would provide
+more access than the cgroup's parent, it'll be removed from the whitelist.
+
+Example:
+      A
+     / \
+        B
+
+    group        behavior	exceptions
+    A            allow		"b 8:* rwm", "c 116:1 rw"
+    B            deny		"c 1:3 rwm", "c 116:2 rwm", "b 3:* rwm"
+
+If a device is denied in group A:
+	# echo "c 116:* r" > A/devices.deny
+it'll propagate down and after revalidating B's entries, the whitelist entry
+"c 116:2 rwm" will be removed:
+
+    group        whitelist entries                        denied devices
+    A            all                                      "b 8:* rwm", "c 116:* rw"
+    B            "c 1:3 rwm", "b 3:* rwm"                 all the rest
+
+In case parent's exceptions change and local exceptions are not allowed
+anymore, they'll be deleted.
+
+Notice that new whitelist entries will not be propagated:
+      A
+     / \
+        B
+
+    group        whitelist entries                        denied devices
+    A            "c 1:3 rwm", "c 1:5 r"                   all the rest
+    B            "c 1:3 rwm", "c 1:5 r"                   all the rest
+
+when adding "c *:3 rwm":
+	# echo "c *:3 rwm" >A/devices.allow
+
+the result:
+    group        whitelist entries                        denied devices
+    A            "c *:3 rwm", "c 1:5 r"                   all the rest
+    B            "c 1:3 rwm", "c 1:5 r"                   all the rest
+
+but now it'll be possible to add new entries to B:
+	# echo "c 2:3 rwm" >B/devices.allow
+	# echo "c 50:3 r" >B/devices.allow
+or even
+	# echo "c *:3 rwm" >B/devices.allow
+
+Allowing or denying all by writing 'a' to devices.allow or devices.deny will
+not be possible once the device cgroups has children.
+
+4.1 Hierarchy (internal implementation)
+
+device cgroups is implemented internally using a behavior (ALLOW, DENY) and a
+list of exceptions.  The internal state is controlled using the same user
+interface to preserve compatibility with the previous whitelist-only
+implementation.  Removal or addition of exceptions that will reduce the access
+to devices will be propagated down the hierarchy.
+For every propagated exception, the effective rules will be re-evaluated based
+on current parent's access rules.

Documentation/cgroups/memory.txt

@@ -40,6 +40,7 @@ Features:
  - soft limit
  - moving (recharging) account at moving a task is selectable.
  - usage threshold notifier
+ - memory pressure notifier
  - oom-killer disable knob and oom-notifier
  - Root cgroup has no limit controls.
 
@@ -65,6 +66,7 @@ Brief summary of control files.
  memory.stat			 # show various statistics
  memory.use_hierarchy		 # set/show hierarchical account enabled
  memory.force_empty		 # trigger forced move charge to parent
+ memory.pressure_level		 # set memory pressure notifications
  memory.swappiness		 # set/show swappiness parameter of vmscan
 				 (See sysctl's vm.swappiness)
  memory.move_charge_at_immigrate # set/show controls of moving charges
@@ -194,7 +196,7 @@ the cgroup that brought it in -- this will happen on memory pressure).
 But see section 8.2: when moving a task to another cgroup, its pages may
 be recharged to the new cgroup, if move_charge_at_immigrate has been chosen.
 
-Exception: If CONFIG_CGROUP_CGROUP_MEMCG_SWAP is not used.
+Exception: If CONFIG_MEMCG_SWAP is not used.
 When you do swapoff and make swapped-out pages of shmem(tmpfs) to
 be backed into memory in force, charges for pages are accounted against the
 caller of swapoff rather than the users of shmem.
@@ -478,7 +480,9 @@ memory.stat file includes following statistics
 
 # per-memory cgroup local status
 cache		- # of bytes of page cache memory.
-rss		- # of bytes of anonymous and swap cache memory.
+rss		- # of bytes of anonymous and swap cache memory (includes
+		transparent hugepages).
+rss_huge	- # of bytes of anonymous transparent hugepages.
 mapped_file	- # of bytes of mapped file (includes tmpfs/shmem)
 pgpgin		- # of charging events to the memory cgroup. The charging
 		event happens each time a page is accounted as either mapped
@@ -762,7 +766,73 @@ At reading, current status of OOM is shown.
 	under_oom	 0 or 1 (if 1, the memory cgroup is under OOM, tasks may
 				 be stopped.)
 
-11. TODO
+11. Memory Pressure
+
+The pressure level notifications can be used to monitor the memory
+allocation cost; based on the pressure, applications can implement
+different strategies of managing their memory resources. The pressure
+levels are defined as following:
+
+The "low" level means that the system is reclaiming memory for new
+allocations. Monitoring this reclaiming activity might be useful for
+maintaining cache level. Upon notification, the program (typically
+"Activity Manager") might analyze vmstat and act in advance (i.e.
+prematurely shutdown unimportant services).
+
+The "medium" level means that the system is experiencing medium memory
+pressure, the system might be making swap, paging out active file caches,
+etc. Upon this event applications may decide to further analyze
+vmstat/zoneinfo/memcg or internal memory usage statistics and free any
+resources that can be easily reconstructed or re-read from a disk.
+
+The "critical" level means that the system is actively thrashing, it is
+about to out of memory (OOM) or even the in-kernel OOM killer is on its
+way to trigger. Applications should do whatever they can to help the
+system. It might be too late to consult with vmstat or any other
+statistics, so it's advisable to take an immediate action.
+
+The events are propagated upward until the event is handled, i.e. the
+events are not pass-through. Here is what this means: for example you have
+three cgroups: A->B->C. Now you set up an event listener on cgroups A, B
+and C, and suppose group C experiences some pressure. In this situation,
+only group C will receive the notification, i.e. groups A and B will not
+receive it. This is done to avoid excessive "broadcasting" of messages,
+which disturbs the system and which is especially bad if we are low on
+memory or thrashing. So, organize the cgroups wisely, or propagate the
+events manually (or, ask us to implement the pass-through events,
+explaining why would you need them.)
+
+The file memory.pressure_level is only used to setup an eventfd. To
+register a notification, an application must:
+
+- create an eventfd using eventfd(2);
+- open memory.pressure_level;
+- write string like "<event_fd> <fd of memory.pressure_level> <level>"
+  to cgroup.event_control.
+
+Application will be notified through eventfd when memory pressure is at
+the specific level (or higher). Read/write operations to
+memory.pressure_level are no implemented.
+
+Test:
+
+   Here is a small script example that makes a new cgroup, sets up a
+   memory limit, sets up a notification in the cgroup and then makes child
+   cgroup experience a critical pressure:
+
+   # cd /sys/fs/cgroup/memory/
+   # mkdir foo
+   # cd foo
+   # cgroup_event_listener memory.pressure_level low &
+   # echo 8000000 > memory.limit_in_bytes
+   # echo 8000000 > memory.memsw.limit_in_bytes
+   # echo $$ > tasks
+   # dd if=/dev/zero | read x
+
+   (Expect a bunch of notifications, and eventually, the oom-killer will
+   trigger.)
+
+12. TODO
 
 1. Add support for accounting huge pages (as a separate controller)
 2. Make per-cgroup scanner reclaim not-shared pages first

Documentation/cgroups/net_cls.txt

+Network classifier cgroup
+-------------------------
+
+The Network classifier cgroup provides an interface to
+tag network packets with a class identifier (classid).
+
+The Traffic Controller (tc) can be used to assign
+different priorities to packets from different cgroups.
+
+Creating a net_cls cgroups instance creates a net_cls.classid file.
+This net_cls.classid value is initialized to 0.
+
+You can write hexadecimal values to net_cls.classid; the format for these
+values is 0xAAAABBBB; AAAA is the major handle number and BBBB
+is the minor handle number.
+Reading net_cls.classid yields a decimal result.
+
+Example:
+mkdir /sys/fs/cgroup/net_cls
+mount -t cgroup -onet_cls net_cls /sys/fs/cgroup/net_cls
+mkdir /sys/fs/cgroup/net_cls/0
+echo 0x100001 >  /sys/fs/cgroup/net_cls/0/net_cls.classid
+	- setting a 10:1 handle.
+
+cat /sys/fs/cgroup/net_cls/0/net_cls.classid
+1048577
+
+configuring tc:
+tc qdisc add dev eth0 root handle 10: htb
+
+tc class add dev eth0 parent 10: classid 10:1 htb rate 40mbit
+ - creating traffic class 10:1
+
+tc filter add dev eth0 parent 10: protocol ip prio 10 handle 1: cgroup

Documentation/clk.txt

@@ -174,9 +174,9 @@ int clk_foo_enable(struct clk_hw *hw)
 };
 
 Below is a matrix detailing which clk_ops are mandatory based upon the
-hardware capbilities of that clock.  A cell marked as "y" means
+hardware capabilities of that clock.  A cell marked as "y" means
 mandatory, a cell marked as "n" implies that either including that
-callback is invalid or otherwise uneccesary.  Empty cells are either
+callback is invalid or otherwise unnecessary.  Empty cells are either
 optional or must be evaluated on a case-by-case basis.
 
                            clock hardware characteristics
@@ -231,3 +231,14 @@ To better enforce this policy, always follow this simple rule: any
 statically initialized clock data MUST be defined in a separate file
 from the logic that implements its ops.  Basically separate the logic
 from the data and all is well.
+
+	Part 6 - Disabling clock gating of unused clocks
+
+Sometimes during development it can be useful to be able to bypass the
+default disabling of unused clocks. For example, if drivers aren't enabling
+clocks properly but rely on them being on from the bootloader, bypassing
+the disabling means that the driver will remain functional while the issues
+are sorted out.
+
+To bypass this disabling, include "clk_ignore_unused" in the bootargs to the
+kernel.

Documentation/coccinelle.txt

@@ -114,7 +114,7 @@ To apply Coccinelle to a specific directory, M= can be used.
 For example, to check drivers/net/wireless/ one may write:
 
     make coccicheck M=drivers/net/wireless/
-    
+
 To apply Coccinelle on a file basis, instead of a directory basis, the
 following command may be used:
 
@@ -134,6 +134,15 @@ MODE variable explained above.
 In this mode, there is no information about semantic patches
 displayed, and no commit message proposed.
 
+ Additional flags
+~~~~~~~~~~~~~~~~~~
+
+Additional flags can be passed to spatch through the SPFLAGS
+variable.
+
+    make SPFLAGS=--use_glimpse coccicheck
+
+See spatch --help to learn more about spatch options.
 
  Proposing new semantic patches
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Documentation/cpu-freq/cpu-drivers.txt

@@ -108,8 +108,9 @@ policy->governor		must contain the "default policy" for
 				cpufreq_driver.target is called with
 				these values.
 
-For setting some of these values, the frequency table helpers might be
-helpful. See the section 2 for more information on them.
+For setting some of these values (cpuinfo.min[max]_freq, policy->min[max]), the
+frequency table helpers might be helpful. See the section 2 for more information
+on them.
 
 SMP systems normally have same clock source for a group of cpus. For these the
 .init() would be called only once for the first online cpu. Here the .init()
@@ -184,10 +185,10 @@ the reference implementation in drivers/cpufreq/longrun.c
 As most cpufreq processors only allow for being set to a few specific
 frequencies, a "frequency table" with some functions might assist in
 some work of the processor driver. Such a "frequency table" consists
-of an array of struct cpufreq_freq_table entries, with any value in
+of an array of struct cpufreq_frequency_table entries, with any value in
 "index" you want to use, and the corresponding frequency in
 "frequency". At the end of the table, you need to add a
-cpufreq_freq_table entry with frequency set to CPUFREQ_TABLE_END. And
+cpufreq_frequency_table entry with frequency set to CPUFREQ_TABLE_END. And
 if you want to skip one entry in the table, set the frequency to 
 CPUFREQ_ENTRY_INVALID. The entries don't need to be in ascending
 order.

Documentation/cpu-freq/governors.txt

@@ -131,8 +131,8 @@ sampling_rate_min:
 The sampling rate is limited by the HW transition latency:
 transition_latency * 100
 Or by kernel restrictions:
-If CONFIG_NO_HZ is set, the limit is 10ms fixed.
-If CONFIG_NO_HZ is not set or nohz=off boot parameter is used, the
+If CONFIG_NO_HZ_COMMON is set, the limit is 10ms fixed.
+If CONFIG_NO_HZ_COMMON is not set or nohz=off boot parameter is used, the
 limits depend on the CONFIG_HZ option:
 HZ=1000: min=20000us  (20ms)
 HZ=250:  min=80000us  (80ms)
@@ -167,6 +167,27 @@ of load evaluation and helping the CPU stay at its top speed when truly
 busy, rather than shifting back and forth in speed. This tunable has no
 effect on behavior at lower speeds/lower CPU loads.
 
+powersave_bias: this parameter takes a value between 0 to 1000. It
+defines the percentage (times 10) value of the target frequency that
+will be shaved off of the target. For example, when set to 100 -- 10%,
+when ondemand governor would have targeted 1000 MHz, it will target
+1000 MHz - (10% of 1000 MHz) = 900 MHz instead. This is set to 0
+(disabled) by default.
+When AMD frequency sensitivity powersave bias driver --
+drivers/cpufreq/amd_freq_sensitivity.c is loaded, this parameter
+defines the workload frequency sensitivity threshold in which a lower
+frequency is chosen instead of ondemand governor's original target.
+The frequency sensitivity is a hardware reported (on AMD Family 16h
+Processors and above) value between 0 to 100% that tells software how
+the performance of the workload running on a CPU will change when
+frequency changes. A workload with sensitivity of 0% (memory/IO-bound)
+will not perform any better on higher core frequency, whereas a
+workload with sensitivity of 100% (CPU-bound) will perform better
+higher the frequency. When the driver is loaded, this is set to 400
+by default -- for CPUs running workloads with sensitivity value below
+40%, a lower frequency is chosen. Unloading the driver or writing 0
+will disable this feature.
+
 
 2.5 Conservative
 ----------------
@@ -191,6 +212,12 @@ governor but for the opposite direction.  For example when set to its
 default value of '20' it means that if the CPU usage needs to be below
 20% between samples to have the frequency decreased.
 
+sampling_down_factor: similar functionality as in "ondemand" governor.
+But in "conservative", it controls the rate at which the kernel makes
+a decision on when to decrease the frequency while running in any
+speed. Load for frequency increase is still evaluated every
+sampling rate.
+
 3. The Governor Interface in the CPUfreq Core
 =============================================
 

Documentation/cpuidle/driver.txt

@@ -15,11 +15,17 @@ has mechanisms in place to support actual entry-exit into CPU idle states.
 cpuidle driver initializes the cpuidle_device structure for each CPU device
 and registers with cpuidle using cpuidle_register_device.
 
+If all the idle states are the same, the wrapper function cpuidle_register
+could be used instead.
+
 It can also support the dynamic changes (like battery <-> AC), by using
 cpuidle_pause_and_lock, cpuidle_disable_device and cpuidle_enable_device,
 cpuidle_resume_and_unlock.
 
 Interfaces:
+extern int cpuidle_register(struct cpuidle_driver *drv,
+                            const struct cpumask *const coupled_cpus);
+extern int cpuidle_unregister(struct cpuidle_driver *drv);
 extern int cpuidle_register_driver(struct cpuidle_driver *drv);
 extern void cpuidle_unregister_driver(struct cpuidle_driver *drv);
 extern int cpuidle_register_device(struct cpuidle_device *dev);

Documentation/device-mapper/dm-raid.txt

 dm-raid
--------
+=======
 
 The device-mapper RAID (dm-raid) target provides a bridge from DM to MD.
 It allows the MD RAID drivers to be accessed using a device-mapper
 interface.
 
+
+Mapping Table Interface
+-----------------------
 The target is named "raid" and it accepts the following parameters:
 
   <raid_type> <#raid_params> <raid_params> \
@@ -47,7 +50,7 @@ The target is named "raid" and it accepts the following parameters:
     followed by optional parameters (in any order):
 	[sync|nosync]   Force or prevent RAID initialization.
 
-	[rebuild <idx>]	Rebuild drive number idx (first drive is 0).
+	[rebuild <idx>]	Rebuild drive number 'idx' (first drive is 0).
 
 	[daemon_sleep <ms>]
 		Interval between runs of the bitmap daemon that
@@ -56,9 +59,9 @@ The target is named "raid" and it accepts the following parameters:
 
 	[min_recovery_rate <kB/sec/disk>]  Throttle RAID initialization
 	[max_recovery_rate <kB/sec/disk>]  Throttle RAID initialization
-	[write_mostly <idx>]		   Drive index is write-mostly
-	[max_write_behind <sectors>]       See '-write-behind=' (man mdadm)
-	[stripe_cache <sectors>]           Stripe cache size (higher RAIDs only)
+	[write_mostly <idx>]		   Mark drive index 'idx' write-mostly.
+	[max_write_behind <sectors>]       See '--write-behind=' (man mdadm)
+	[stripe_cache <sectors>]           Stripe cache size (RAID 4/5/6 only)
 	[region_size <sectors>]
 		The region_size multiplied by the number of regions is the
 		logical size of the array.  The bitmap records the device
@@ -122,7 +125,7 @@ The target is named "raid" and it accepts the following parameters:
 	given for both the metadata and data drives for a given position.
 
 
-Example tables
+Example Tables
 --------------
 # RAID4 - 4 data drives, 1 parity (no metadata devices)
 # No metadata devices specified to hold superblock/bitmap info
@@ -141,26 +144,70 @@ Example tables
         raid4 4 2048 sync min_recovery_rate 20 \
         5 8:17 8:18 8:33 8:34 8:49 8:50 8:65 8:66 8:81 8:82
 
+
+Status Output
+-------------
 'dmsetup table' displays the table used to construct the mapping.
 The optional parameters are always printed in the order listed
 above with "sync" or "nosync" always output ahead of the other
 arguments, regardless of the order used when originally loading the table.
 Arguments that can be repeated are ordered by value.
 
-'dmsetup status' yields information on the state and health of the
-array.
-The output is as follows:
+
+'dmsetup status' yields information on the state and health of the array.
+The output is as follows (normally a single line, but expanded here for
+clarity):
 1: <s> <l> raid \
-2:      <raid_type> <#devices> <1 health char for each dev> <resync_ratio>
+2:      <raid_type> <#devices> <health_chars> \
+3:      <sync_ratio> <sync_action> <mismatch_cnt>
 
 Line 1 is the standard output produced by device-mapper.
-Line 2 is produced by the raid target, and best explained by example:
-        0 1960893648 raid raid4 5 AAAAA 2/490221568
+Line 2 & 3 are produced by the raid target and are best explained by example:
+        0 1960893648 raid raid4 5 AAAAA 2/490221568 init 0
 Here we can see the RAID type is raid4, there are 5 devices - all of
-which are 'A'live, and the array is 2/490221568 complete with recovery.
-Faulty or missing devices are marked 'D'.  Devices that are out-of-sync
-are marked 'a'.
-
+which are 'A'live, and the array is 2/490221568 complete with its initial
+recovery.  Here is a fuller description of the individual fields:
+	<raid_type>     Same as the <raid_type> used to create the array.
+	<health_chars>  One char for each device, indicating: 'A' = alive and
+			in-sync, 'a' = alive but not in-sync, 'D' = dead/failed.
+	<sync_ratio>    The ratio indicating how much of the array has undergone
+			the process described by 'sync_action'.  If the
+			'sync_action' is "check" or "repair", then the process
+			of "resync" or "recover" can be considered complete.
+	<sync_action>   One of the following possible states:
+			idle    - No synchronization action is being performed.
+			frozen  - The current action has been halted.
+			resync  - Array is undergoing its initial synchronization
+				  or is resynchronizing after an unclean shutdown
+				  (possibly aided by a bitmap).
+			recover - A device in the array is being rebuilt or
+				  replaced.
+			check   - A user-initiated full check of the array is
+				  being performed.  All blocks are read and
+				  checked for consistency.  The number of
+				  discrepancies found are recorded in
+				  <mismatch_cnt>.  No changes are made to the
+				  array by this action.
+			repair  - The same as "check", but discrepancies are
+				  corrected.
+			reshape - The array is undergoing a reshape.
+	<mismatch_cnt>  The number of discrepancies found between mirror copies
+			in RAID1/10 or wrong parity values found in RAID4/5/6.
+			This value is valid only after a "check" of the array
+			is performed.  A healthy array has a 'mismatch_cnt' of 0.
+
+Message Interface
+-----------------
+The dm-raid target will accept certain actions through the 'message' interface.
+('man dmsetup' for more information on the message interface.)  These actions
+include:
+	"idle"   - Halt the current sync action.
+	"frozen" - Freeze the current sync action.
+	"resync" - Initiate/continue a resync.
+	"recover"- Initiate/continue a recover process.
+	"check"  - Initiate a check (i.e. a "scrub") of the array.
+	"repair" - Initiate a repair of the array.
+	"reshape"- Currently unsupported (-EINVAL).
 
 Version History
 ---------------
@@ -171,4 +218,7 @@ Version History
 1.3.1	Allow device replacement/rebuild for RAID 10
 1.3.2   Fix/improve redundancy checking for RAID10
 1.4.0	Non-functional change.  Removes arg from mapping function.
-1.4.1   Add RAID10 "far" and "offset" algorithm support.
+1.4.1   RAID10 fix redundancy validation checks (commit 55ebbb5).
+1.4.2   Add RAID10 "far" and "offset" algorithm support.
+1.5.0   Add message interface to allow manipulation of the sync_action.
+	New status (STATUSTYPE_INFO) fields: sync_action and mismatch_cnt.

Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.txt

+Altera SOCFPGA Clock Manager
+
+Required properties:
+- compatible : "altr,clk-mgr"
+- reg : Should contain base address and length for Clock Manager
+
+Example:
+	 clkmgr@ffd04000 {
+		compatible = "altr,clk-mgr";
+		reg = <0xffd04000 0x1000>;
+	};

Documentation/devicetree/bindings/arm/atmel-adc.txt

@@ -14,9 +14,19 @@ Required properties:
   - atmel,adc-status-register: Offset of the Interrupt Status Register
   - atmel,adc-trigger-register: Offset of the Trigger Register
   - atmel,adc-vref: Reference voltage in millivolts for the conversions
+  - atmel,adc-res: List of resolution in bits supported by the ADC. List size
+		   must be two at least.
+  - atmel,adc-res-names: Contains one identifier string for each resolution
+			 in atmel,adc-res property. "lowres" and "highres"
+			 identifiers are required.
 
 Optional properties:
   - atmel,adc-use-external: Boolean to enable of external triggers
+  - atmel,adc-use-res: String corresponding to an identifier from
+		       atmel,adc-res-names property. If not specified, the highest
+		       resolution will be used.
+  - atmel,adc-sleep-mode: Boolean to enable sleep mode when no conversion
+  - atmel,adc-sample-hold-time: Sample and Hold Time in microseconds
  
 Optional trigger Nodes:
   - Required properties:
@@ -40,6 +50,9 @@ adc0: adc@fffb0000 {
 	atmel,adc-trigger-register = <0x08>;
 	atmel,adc-use-external;
 	atmel,adc-vref = <3300>;
+	atmel,adc-res = <8 10>;
+	atmel,adc-res-names = "lowres", "highres";
+	atmel,adc-use-res = "lowres";
 
 	trigger@0 {
 		trigger-name = "external-rising";

Documentation/devicetree/bindings/arm/bcm/bcm,kona-timer.txt

+Broadcom Kona Family timer
+-----------------------------------------------------
+This timer is used in the following Broadcom SoCs:
+ BCM11130, BCM11140, BCM11351, BCM28145, BCM28155
+
+Required properties:
+- compatible : "bcm,kona-timer"
+- reg : Register range for the timer
+- interrupts : interrupt for the timer
+- clock-frequency: frequency that the clock operates
+
+Example:
+	timer@35006000 {
+		compatible = "bcm,kona-timer";
+		reg = <0x35006000 0x1000>;
+		interrupts = <0x0 7 0x4>;
+		clock-frequency = <32768>;
+	};
+

Documentation/devicetree/bindings/arm/msm/ssbi.txt

+* Qualcomm SSBI
+
+Some Qualcomm MSM devices contain a point-to-point serial bus used to
+communicate with a limited range of devices (mostly power management
+chips).
+
+These require the following properties:
+
+- compatible: "qcom,ssbi"
+
+- qcom,controller-type
+  indicates the SSBI bus variant the controller should use to talk
+  with the slave device.  This should be one of "ssbi", "ssbi2", or
+  "pmic-arbiter".  The type chosen is determined by the attached
+  slave.
+
+The slave device should be the single child node of the ssbi device
+with a compatible field.

Documentation/devicetree/bindings/arm/msm/timer.txt

@@ -3,36 +3,35 @@
 Properties:
 
 - compatible : Should at least contain "qcom,msm-timer". More specific
-  properties such as "qcom,msm-gpt" and "qcom,msm-dgt" specify a general
-  purpose timer and a debug timer respectively.
+               properties specify which subsystem the timers are paired with.
 
-- interrupts : Interrupt indicating a match event.
+               "qcom,kpss-timer" - krait subsystem
+               "qcom,scss-timer" - scorpion subsystem
 
-- reg : Specifies the base address of the timer registers. The second region
-  specifies an optional register used to configure the clock divider.
+- interrupts : Interrupts for the the debug timer, the first general purpose
+               timer, and optionally a second general purpose timer in that
+               order.
 
-- clock-frequency : The frequency of the timer in Hz.
+- reg : Specifies the base address of the timer registers.
+
+- clock-frequency : The frequency of the debug timer and the general purpose
+                    timer(s) in Hz in that order.
 
 Optional:
 
 - cpu-offset : per-cpu offset used when the timer is accessed without the
-  CPU remapping facilities. The offset is cpu-offset * cpu-nr.
+               CPU remapping facilities. The offset is
+               cpu-offset + (0x10000 * cpu-nr).
 
 Example:
 
-       timer@200a004 {
-               compatible = "qcom,msm-gpt", "qcom,msm-timer";
-               interrupts = <1 2 0x301>;
-               reg = <0x0200a004 0x10>;
-               clock-frequency = <32768>;
-               cpu-offset = <0x40000>;
-       };
-
-       timer@200a024 {
-               compatible = "qcom,msm-dgt", "qcom,msm-timer";
-               interrupts = <1 3 0x301>;
-               reg = <0x0200a024 0x10>,
-                     <0x0200a034 0x4>;
-               clock-frequency = <6750000>;
+       timer@200a000 {
+               compatible = "qcom,scss-timer", "qcom,msm-timer";
+               interrupts = <1 1 0x301>,
+                            <1 2 0x301>,
+                            <1 3 0x301>;
+               reg = <0x0200a000 0x100>;
+               clock-frequency = <19200000>,
+                                 <32768>;
                cpu-offset = <0x40000>;
        };

Documentation/devicetree/bindings/arm/omap/l3-noc.txt

@@ -6,6 +6,7 @@ provided by Arteris.
 Required properties:
 - compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
                Should be "ti,omap4-l3-noc" for OMAP4 family
+- reg:	Contains L3 register address range for each noc domain.
 - ti,hwmods: "l3_main_1", ... One hwmod for each noc domain.
 
 Examples:

Documentation/devicetree/bindings/arm/omap/timer.txt

 OMAP Timer bindings
 
 Required properties:
-- compatible:		Must be "ti,omap2-timer" for OMAP2+ controllers.
+- compatible:		Should be set to one of the below. Please note that
+			OMAP44xx devices have timer instances that are 100%
+			register compatible with OMAP3xxx devices as well as
+			newer timers that are not 100% register compatible.
+			So for OMAP44xx devices timer instances may use
+			different compatible strings.
+
+			ti,omap2420-timer (applicable to OMAP24xx devices)
+			ti,omap3430-timer (applicable to OMAP3xxx/44xx devices)
+			ti,omap4430-timer (applicable to OMAP44xx devices)
+			ti,omap5430-timer (applicable to OMAP543x devices)
+			ti,am335x-timer	(applicable to AM335x devices)
+			ti,am335x-timer-1ms (applicable to AM335x devices)
+
 - reg:			Contains timer register address range (base address and
 			length).
 - interrupts: 		Contains the interrupt information for the timer. The
@@ -22,7 +35,7 @@ Optional properties:
 Example:
 
 timer12: timer@48304000 {
-	compatible = "ti,omap2-timer";
+	compatible = "ti,omap3430-timer";
 	reg = <0x48304000 0x400>;
 	interrupts = <95>;
 	ti,hwmods = "timer12"

Documentation/devicetree/bindings/arm/primecell.txt

@@ -16,14 +16,31 @@ Optional properties:
 - clocks : From common clock binding. First clock is phandle to clock for apb
 	pclk. Additional clocks are optional and specific to those peripherals.
 - clock-names : From common clock binding. Shall be "apb_pclk" for first clock.
+- dmas : From common DMA binding. If present, refers to one or more dma channels.
+- dma-names : From common DMA binding, needs to match the 'dmas' property.
+              Devices with exactly one receive and transmit channel shall name
+              these "rx" and "tx", respectively.
+- pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt
+- pinctrl-names : Names corresponding to the numbered pinctrl states
+- interrupts : one or more interrupt specifiers
+- interrupt-names : names corresponding to the interrupts properties
 
 Example:
 
 serial@fff36000 {
 	compatible = "arm,pl011", "arm,primecell";
 	arm,primecell-periphid = <0x00341011>;
+
 	clocks = <&pclk>;
 	clock-names = "apb_pclk";
-	
+
+	dmas = <&dma-controller 4>, <&dma-controller 5>;
+	dma-names = "rx", "tx";	
+
+	pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>;
+	pinctrl-1 = <&uart0_sleep_mode>;
+	pinctrl-names = "default","sleep";
+
+	interrupts = <0 11 0x4>;
 };
 

Documentation/devicetree/bindings/arm/samsung-boards.txt

@@ -6,3 +6,13 @@ Required root node properties:
     - compatible = should be one or more of the following.
         (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board.
         (b) "samsung,exynos4210"  - for boards based on Exynos4210 SoC.
+
+Optional:
+    - firmware node, specifying presence and type of secure firmware:
+        - compatible: only "samsung,secure-firmware" is currently supported
+        - reg: address of non-secure SYSRAM used for communication with firmware
+
+	firmware@0203F000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0203F000 0x1000>;
+	};

Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt

+Samsung Exynos Analog to Digital Converter bindings
+
+The devicetree bindings are for the new ADC driver written for
+Exynos4 and upward SoCs from Samsung.
+
+New driver handles the following
+1. Supports ADC IF found on EXYNOS4412/EXYNOS5250
+   and future SoCs from Samsung
+2. Add ADC driver under iio/adc framework
+3. Also adds the Documentation for device tree bindings
+
+Required properties:
+- compatible:		Must be "samsung,exynos-adc-v1"
+				for exynos4412/5250 controllers.
+			Must be "samsung,exynos-adc-v2" for
+				future controllers.
+- reg:			Contains ADC register address range (base address and
+			length) and the address of the phy enable register.
+- interrupts: 		Contains the interrupt information for the timer. The
+			format is being dependent on which interrupt controller
+			the Samsung device uses.
+- #io-channel-cells = <1>; As ADC has multiple outputs
+- clocks		From common clock binding: handle to adc clock.
+- clock-names		From common clock binding: Shall be "adc".
+- vdd-supply		VDD input supply.
+
+Note: child nodes can be added for auto probing from device tree.
+
+Example: adding device info in dtsi file
+
+adc: adc@12D10000 {
+	compatible = "samsung,exynos-adc-v1";
+	reg = <0x12D10000 0x100>, <0x10040718 0x4>;
+	interrupts = <0 106 0>;
+	#io-channel-cells = <1>;
+	io-channel-ranges;
+
+	clocks = <&clock 303>;
+	clock-names = "adc";
+
+	vdd-supply = <&buck5_reg>;
+};
+
+
+Example: Adding child nodes in dts file
+
+adc@12D10000 {
+
+	/* NTC thermistor is a hwmon device */
+	ncp15wb473@0 {
+		compatible = "ntc,ncp15wb473";
+		pullup-uV = <1800000>;
+		pullup-ohm = <47000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc 4>;
+	};
+};
+
+Note: Does not apply to ADC driver under arch/arm/plat-samsung/
+Note: The child node can be added under the adc node or separately.

Documentation/devicetree/bindings/arm/samsung/sysreg.txt

+SAMSUNG S5P/Exynos SoC series System Registers (SYSREG)
+
+Properties:
+ - name : should be 'sysreg';
+ - compatible : should contain "samsung,<chip name>-sysreg", "syscon";
+   For Exynos4 SoC series it should be "samsung,exynos4-sysreg", "syscon";
+ - reg : offset and length of the register set.

Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt

 NVIDIA Tegra Power Management Controller (PMC)
 
-Properties:
+The PMC block interacts with an external Power Management Unit. The PMC
+mostly controls the entry and exit of the system from different sleep
+modes. It provides power-gating controllers for SoC and CPU power-islands.
+
+Required properties:
 - name : Should be pmc
 - compatible : Should contain "nvidia,tegra<chip>-pmc".
 - reg : Offset and length of the register set for the device
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+  "pclk" (The Tegra clock of that name),
+  "clk32k_in" (The 32KHz clock input to Tegra).
+
+Optional properties:
 - nvidia,invert-interrupt : If present, inverts the PMU interrupt signal.
   The PMU is an external Power Management Unit, whose interrupt output
   signal is fed into the PMC. This signal is optionally inverted, and then
   fed into the ARM GIC. The PMC is not involved in the detection or
   handling of this interrupt signal, merely its inversion.
+- nvidia,suspend-mode : The suspend mode that the platform should use.
+  Valid values are 0, 1 and 2:
+  0 (LP0): CPU + Core voltage off and DRAM in self-refresh
+  1 (LP1): CPU voltage off and DRAM in self-refresh
+  2 (LP2): CPU voltage off
+- nvidia,core-power-req-active-high : Boolean, core power request active-high
+- nvidia,sys-clock-req-active-high : Boolean, system clock request active-high
+- nvidia,combined-power-req : Boolean, combined power request for CPU & Core
+- nvidia,cpu-pwr-good-en : Boolean, CPU power good signal (from PMIC to PMC)
+			   is enabled.
+
+Required properties when nvidia,suspend-mode is specified:
+- nvidia,cpu-pwr-good-time : CPU power good time in uS.
+- nvidia,cpu-pwr-off-time : CPU power off time in uS.
+- nvidia,core-pwr-good-time : <Oscillator-stable-time Power-stable-time>
+			      Core power good time in uS.
+- nvidia,core-pwr-off-time : Core power off time in uS.
+
+Required properties when nvidia,suspend-mode=<0>:
+- nvidia,lp0-vec : <start length> Starting address and length of LP0 vector
+  The LP0 vector contains the warm boot code that is executed by AVP when
+  resuming from the LP0 state. The AVP (Audio-Video Processor) is an ARM7
+  processor and always being the first boot processor when chip is power on
+  or resume from deep sleep mode. When the system is resumed from the deep
+  sleep mode, the warm boot code will restore some PLLs, clocks and then
+  bring up CPU0 for resuming the system.
 
 Example:
 
+/ SoC dts including file
 pmc@7000f400 {
 	compatible = "nvidia,tegra20-pmc";
 	reg = <0x7000e400 0x400>;
+	clocks = <&tegra_car 110>, <&clk32k_in>;
+	clock-names = "pclk", "clk32k_in";
 	nvidia,invert-interrupt;
+	nvidia,suspend-mode = <1>;
+	nvidia,cpu-pwr-good-time = <2000>;
+	nvidia,cpu-pwr-off-time = <100>;
+	nvidia,core-pwr-good-time = <3845 3845>;
+	nvidia,core-pwr-off-time = <458>;
+	nvidia,core-power-req-active-high;
+	nvidia,sys-clock-req-active-high;
+	nvidia,lp0-vec = <0xbdffd000 0x2000>;
+};
+
+/ Tegra board dts file
+{
+	...
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+	...
 };

Documentation/devicetree/bindings/ata/imx-pata.txt

+* Freescale i.MX PATA Controller
+
+Required properties:
+- compatible: "fsl,imx27-pata"
+- reg: Address range of the PATA Controller
+- interrupts: The interrupt of the PATA Controller
+- clocks: the clocks for the PATA Controller
+
+Example:
+
+	pata: pata@83fe0000 {
+		compatible = "fsl,imx51-pata", "fsl,imx27-pata";
+		reg = <0x83fe0000 0x4000>;
+		interrupts = <70>;
+		clocks = <&clks 161>;
+		status = "disabled";
+	};

Documentation/devicetree/bindings/ata/pata-arasan.txt

@@ -6,6 +6,26 @@ Required properties:
 - interrupt-parent: Should be the phandle for the interrupt controller
   that services interrupts for this device
 - interrupt: Should contain the CF interrupt number
+- clock-frequency: Interface clock rate, in Hz, one of
+       25000000
+       33000000
+       40000000
+       50000000
+       66000000
+       75000000
+      100000000
+      125000000
+      150000000
+      166000000
+      200000000
+
+Optional properties:
+- arasan,broken-udma: if present, UDMA mode is unusable
+- arasan,broken-mwdma: if present, MWDMA mode is unusable
+- arasan,broken-pio: if present, PIO mode is unusable
+- dmas: one DMA channel, as described in bindings/dma/dma.txt
+  required unless both UDMA and MWDMA mode are broken
+- dma-names: the corresponding channel name, must be "data"
 
 Example:
 
@@ -14,4 +34,6 @@ Example:
 		reg = <0xfc000000 0x1000>;
 		interrupt-parent = <&vic1>;
 		interrupts = <12>;
+		dmas = <&dma-controller 23>;
+		dma-names = "data";
 	};

Documentation/devicetree/bindings/bus/ti-gpmc.txt

@@ -35,36 +35,83 @@ Required properties:
 
 Timing properties for child nodes. All are optional and default to 0.
 
- - gpmc,sync-clk:	Minimum clock period for synchronous mode, in picoseconds
-
- Chip-select signal timings corresponding to GPMC_CONFIG2:
- - gpmc,cs-on:		Assertion time
- - gpmc,cs-rd-off:	Read deassertion time
- - gpmc,cs-wr-off:	Write deassertion time
-
- ADV signal timings corresponding to GPMC_CONFIG3:
- - gpmc,adv-on:		Assertion time
- - gpmc,adv-rd-off:	Read deassertion time
- - gpmc,adv-wr-off:	Write deassertion time
-
- WE signals timings corresponding to GPMC_CONFIG4:
- - gpmc,we-on:		Assertion time
- - gpmc,we-off:		Deassertion time
-
- OE signals timings corresponding to GPMC_CONFIG4:
- - gpmc,oe-on:		Assertion time
- - gpmc,oe-off:		Deassertion time
-
- Access time and cycle time timings corresponding to GPMC_CONFIG5:
- - gpmc,page-burst-access: Multiple access word delay
- - gpmc,access:		Start-cycle to first data valid delay
- - gpmc,rd-cycle:	Total read cycle time
- - gpmc,wr-cycle:	Total write cycle time
+ - gpmc,sync-clk-ps:	Minimum clock period for synchronous mode, in picoseconds
+
+ Chip-select signal timings (in nanoseconds) corresponding to GPMC_CONFIG2:
+ - gpmc,cs-on-ns:	Assertion time
+ - gpmc,cs-rd-off-ns:	Read deassertion time
+ - gpmc,cs-wr-off-ns:	Write deassertion time
+
+ ADV signal timings (in nanoseconds) corresponding to GPMC_CONFIG3:
+ - gpmc,adv-on-ns:	Assertion time
+ - gpmc,adv-rd-off-ns:	Read deassertion time
+ - gpmc,adv-wr-off-ns:	Write deassertion time
+
+ WE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4:
+ - gpmc,we-on-ns	Assertion time
+ - gpmc,we-off-ns:	Deassertion time
+
+ OE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4:
+ - gpmc,oe-on-ns:	Assertion time
+ - gpmc,oe-off-ns:	Deassertion time
+
+ Access time and cycle time timings (in nanoseconds) corresponding to
+ GPMC_CONFIG5:
+ - gpmc,page-burst-access-ns: 	Multiple access word delay
+ - gpmc,access-ns:		Start-cycle to first data valid delay
+ - gpmc,rd-cycle-ns:		Total read cycle time
+ - gpmc,wr-cycle-ns:		Total write cycle time
+ - gpmc,bus-turnaround-ns:	Turn-around time between successive accesses
+ - gpmc,cycle2cycle-delay-ns:	Delay between chip-select pulses
+ - gpmc,clk-activation-ns: 	GPMC clock activation time
+ - gpmc,wait-monitoring-ns:	Start of wait monitoring with regard to valid
+				data
+
+Boolean timing parameters. If property is present parameter enabled and
+disabled if omitted:
+ - gpmc,adv-extra-delay:	ADV signal is delayed by half GPMC clock
+ - gpmc,cs-extra-delay:		CS signal is delayed by half GPMC clock
+ - gpmc,cycle2cycle-diffcsen:	Add "cycle2cycle-delay" between successive
+				accesses to a different CS
+ - gpmc,cycle2cycle-samecsen:	Add "cycle2cycle-delay" between successive
+				accesses to the same CS
+ - gpmc,oe-extra-delay:		OE signal is delayed by half GPMC clock
+ - gpmc,we-extra-delay:		WE signal is delayed by half GPMC clock
+ - gpmc,time-para-granularity:	Multiply all access times by 2
 
 The following are only applicable to OMAP3+ and AM335x:
- - gpmc,wr-access
- - gpmc,wr-data-mux-bus
-
+ - gpmc,wr-access-ns:		In synchronous write mode, for single or
+				burst accesses, defines the number of
+				GPMC_FCLK cycles from start access time
+				to the GPMC_CLK rising edge used by the
+				memory device for the first data capture.
+ - gpmc,wr-data-mux-bus-ns:	In address-data multiplex mode, specifies
+				the time when the first data is driven on
+				the address-data bus.
+
+GPMC chip-select settings properties for child nodes. All are optional.
+
+- gpmc,burst-length	Page/burst length. Must be 4, 8 or 16.
+- gpmc,burst-wrap	Enables wrap bursting
+- gpmc,burst-read	Enables read page/burst mode
+- gpmc,burst-write	Enables write page/burst mode
+- gpmc,device-nand	Device is NAND
+- gpmc,device-width	Total width of device(s) connected to a GPMC
+			chip-select in bytes. The GPMC supports 8-bit
+			and 16-bit devices and so this property must be
+			1 or 2.
+- gpmc,mux-add-data	Address and data multiplexing configuration.
+			Valid values are 1 for address-address-data
+			multiplexing mode and 2 for address-data
+			multiplexing mode.
+- gpmc,sync-read	Enables synchronous read. Defaults to asynchronous
+			is this is not set.
+- gpmc,sync-write	Enables synchronous writes. Defaults to asynchronous
+			is this is not set.
+- gpmc,wait-pin		Wait-pin used by client. Must be less than
+			"gpmc,num-waitpins".
+- gpmc,wait-on-read	Enables wait monitoring on reads.
+- gpmc,wait-on-write	Enables wait monitoring on writes.
 
 Example for an AM33xx board:
 

Documentation/devicetree/bindings/clock/altr_socfpga.txt

+Device Tree Clock bindings for Altera's SoCFPGA platform
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"altr,socfpga-pll-clock" - for a PLL clock
+	"altr,socfpga-perip-clock" - The peripheral clock divided from the
+		PLL clock.
+- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
+- clocks : shall be the input parent clock phandle for the clock. This is
+	either an oscillator or a pll output.
+- #clock-cells : from common clock binding, shall be set to 0.
+
+Optional properties:
+- fixed-divider : If clocks have a fixed divider value, use this property.

Documentation/devicetree/bindings/clock/axi-clkgen.txt

+Binding for the axi-clkgen clock generator
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "adi,axi-clkgen".
+- #clock-cells : from common clock binding; Should always be set to 0.
+- reg : Address and length of the axi-clkgen register set.
+- clocks : Phandle and clock specifier for the parent clock.
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+	clock@0xff000000 {
+		compatible = "adi,axi-clkgen";
+		#clock-cells = <0>;
+		reg = <0xff000000 0x1000>;
+		clocks = <&osc 1>;
+	};

Documentation/devicetree/bindings/clock/exynos5440-clock.txt

+* Samsung Exynos5440 Clock Controller
+
+The Exynos5440 clock controller generates and supplies clock to various
+controllers within the Exynos5440 SoC.
+
+Required Properties:
+
+- comptible: should be "samsung,exynos5440-clock".
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+The following is the list of clocks generated by the controller. Each clock is
+assigned an identifier and client nodes use this identifier to specify the
+clock which they consume.
+
+
+       [Core Clocks]
+
+  Clock			ID
+  ----------------------------
+
+  xtal			1
+  arm_clk		2
+
+   [Peripheral Clock Gates]
+
+  Clock			ID
+  ----------------------------
+
+  spi_baud		16
+  pb0_250		17
+  pr0_250		18
+  pr1_250		19
+  b_250			20
+  b_125			21
+  b_200			22
+  sata			23
+  usb			24
+  gmac0			25
+  cs250			26
+  pb0_250_o		27
+  pr0_250_o		28
+  pr1_250_o		29
+  b_250_o		30
+  b_125_o		31
+  b_200_o		32
+  sata_o		33
+  usb_o			34
+  gmac0_o		35
+  cs250_o		36
+
+Example: An example of a clock controller node is listed below.
+
+	clock: clock-controller@0x10010000 {
+		compatible = "samsung,exynos5440-clock";
+		reg = <0x160000 0x10000>;
+		#clock-cells = <1>;
+	};

Documentation/devicetree/bindings/clock/fixed-factor-clock.txt

+Binding for simple fixed factor rate clock sources.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "fixed-factor-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clock-div: fixed divider.
+- clock-mult: fixed multiplier.
+- clocks: parent clock.
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+	clock {
+		compatible = "fixed-factor-clock";
+		clocks = <&parentclk>;
+		#clock-cells = <0>;
+		div = <2>;
+		mult = <1>;
+	};

Documentation/devicetree/bindings/clock/imx5-clock.txt

@@ -38,7 +38,6 @@ clocks and IDs.
 	usb_phy_podf		23
 	cpu_podf		24
 	di_pred			25
-	tve_di			26
 	tve_s			27
 	uart1_ipg_gate		28
 	uart1_per_gate		29
@@ -172,6 +171,19 @@ clocks and IDs.
 	can1_serial_gate	157
 	can1_ipg_gate		158
 	owire_gate		159
+	gpu3d_s			160
+	gpu2d_s			161
+	gpu3d_gate		162
+	gpu2d_gate		163
+	garb_gate		164
+	cko1_sel		165
+	cko1_podf		166
+	cko1			167
+	cko2_sel		168
+	cko2_podf		169
+	cko2			170
+	srtc_gate		171
+	pata_gate		172
 
 Examples (for mx53):
 

Documentation/devicetree/bindings/clock/imx6q-clock.txt

@@ -205,6 +205,9 @@ clocks and IDs.
 	enet_ref		190
 	usbphy1_gate		191
 	usbphy2_gate		192
+	pll4_post_div		193
+	pll5_post_div		194
+	pll5_video_div		195
 
 Examples:
 

Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt

@@ -120,8 +120,8 @@ Required properties :
   90	clk_d
   91	unassigned
   92	sus
-  93	cdev1
-  94	cdev2
+  93	cdev2
+  94	cdev1
   95	unassigned
 
   96	uart2

Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt

@@ -32,7 +32,7 @@ cpus {
 			396000  950000
 			198000  850000
 		>;
-		transition-latency = <61036>; /* two CLK32 periods */
+		clock-latency = <61036>; /* two CLK32 periods */
 	};
 
 	cpu@1 {