Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull first round of SCSI updates from James Bottomley:
 "This includes driver updates from the usual suspects (bfa, arcmsr,
  scsi_dh_alua, lpfc, storvsc, cxlflash).

  The major change is the addition of the hisi_sas driver, which is an
  ARM platform device for SAS.  The other change of note is an enormous
  style transformation to the atp870u driver (which is our worst written
  SCSI driver)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (169 commits)
  cxlflash: Enable device id for future IBM CXL adapter
  cxlflash: Resolve oops in wait_port_offline
  cxlflash: Fix to resolve cmd leak after host reset
  cxlflash: Removed driver date print
  cxlflash: Fix to avoid virtual LUN failover failure
  cxlflash: Fix to escalate LINK_RESET also on port 1
  storvsc: Tighten up the interrupt path
  storvsc: Refactor the code in storvsc_channel_init()
  storvsc: Properly support Fibre Channel devices
  storvsc: Fix a bug in the layout of the hv_fc_wwn_packet
  mvsas: Add SGPIO support to Marvell 94xx
  mpt3sas: A correction in unmap_resources
  hpsa: Add box and bay information for enclosure devices
  hpsa: Change SAS transport devices to bus 0.
  hpsa: fix path_info_show
  cciss: print max outstanding commands as a hex value
  scsi_debug: Increase the reported optimal transfer length
  lpfc: Update version to 11.0.0.10 for upstream patch set
  lpfc: Use kzalloc instead of kmalloc
  lpfc: Delete unnecessary checks before the function call "mempool_destroy"
  ...

Documentation/devicetree/bindings/scsi/hisilicon-sas.txt

+* HiSilicon SAS controller
+
+The HiSilicon SAS controller supports SAS/SATA.
+
+Main node required properties:
+  - compatible : value should be as follows:
+	(a) "hisilicon,hip05-sas-v1" for v1 hw in hip05 chipset
+  - sas-addr : array of 8 bytes for host SAS address
+  - reg : Address and length of the SAS register
+  - hisilicon,sas-syscon: phandle of syscon used for sas control
+  - ctrl-reset-reg : offset to controller reset register in ctrl reg
+  - ctrl-reset-sts-reg : offset to controller reset status register in ctrl reg
+  - ctrl-clock-ena-reg : offset to controller clock enable register in ctrl reg
+  - queue-count : number of delivery and completion queues in the controller
+  - phy-count : number of phys accessible by the controller
+  - interrupts : Interrupts for phys, completion queues, and fatal
+		sources; the interrupts are ordered in 3 groups, as follows:
+			- Phy interrupts
+			- Completion queue interrupts
+			- Fatal interrupts
+		Phy interrupts : Each phy has 3 interrupt sources:
+			- broadcast
+			- phyup
+			- abnormal
+		The phy interrupts are ordered into groups of 3 per phy
+		(broadcast, phyup, and abnormal) in increasing order.
+		Completion queue interrupts : each completion queue has 1
+			interrupt source.
+			The interrupts are ordered in increasing order.
+		Fatal interrupts : the fatal interrupts are ordered as follows:
+			- ECC
+			- AXI bus
+
+Example:
+	sas0: sas@c1000000 {
+		compatible = "hisilicon,hip05-sas-v1";
+		sas-addr = [50 01 88 20 16 00 00 0a];
+		reg = <0x0 0xc1000000 0x0 0x10000>;
+		hisilicon,sas-syscon = <&pcie_sas>;
+		ctrl-reset-reg = <0xa60>;
+		ctrl-reset-sts-reg = <0x5a30>;
+		ctrl-clock-ena-reg = <0x338>;
+		queue-count = <32>;
+		phy-count = <8>;
+		dma-coherent;
+		interrupt-parent = <&mbigen_dsa>;
+		interrupts =    <259 4>,<263 4>,<264 4>,/* phy0 */
+				<269 4>,<273 4>,<274 4>,/* phy1 */
+				<279 4>,<283 4>,<284 4>,/* phy2 */
+				<289 4>,<293 4>,<294 4>,/* phy3 */
+				<299 4>,<303 4>,<304 4>,/* phy4 */
+				<309 4>,<313 4>,<314 4>,/* phy5 */
+				<319 4>,<323 4>,<324 4>,/* phy6 */
+				<329 4>,<333 4>,<334 4>,/* phy7 */
+				<336 1>,<337 1>,<338 1>,/* cq0-2 */
+				<339 1>,<340 1>,<341 1>,/* cq3-5 */
+				<342 1>,<343 1>,<344 1>,/* cq6-8 */
+				<345 1>,<346 1>,<347 1>,/* cq9-11 */
+				<348 1>,<349 1>,<350 1>,/* cq12-14 */
+				<351 1>,<352 1>,<353 1>,/* cq15-17 */
+				<354 1>,<355 1>,<356 1>,/* cq18-20 */
+				<357 1>,<358 1>,<359 1>,/* cq21-23 */
+				<360 1>,<361 1>,<362 1>,/* cq24-26 */
+				<363 1>,<364 1>,<365 1>,/* cq27-29 */
+				<366 1>,<367 1>/* cq30-31 */
+				<376 4>,/* fatal ecc */
+				<381 4>;/* fatal axi */
+		status = "disabled";
+	};

MAINTAINERS

@@ -5038,6 +5038,13 @@ F:	include/uapi/linux/if_hippi.h
 F:	net/802/hippi.c
 F:	drivers/net/hippi/
 
+HISILICON SAS Controller
+M:	John Garry <john.garry@huawei.com>
+W:	http://www.hisilicon.com
+S:	Supported
+F:	drivers/scsi/hisi_sas/
+F:	Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
+
 HOST AP DRIVER
 M:	Jouni Malinen <j@w1.fi>
 L:	hostap@shmoo.com (subscribers-only)

drivers/block/cciss.c

@@ -3848,7 +3848,7 @@ static void print_cfg_table(ctlr_info_t *h)
 	       readl(&(tb->HostWrite.CoalIntDelay)));
 	dev_dbg(&h->pdev->dev, "   Coalesce Interrupt Count = 0x%x\n",
 	       readl(&(tb->HostWrite.CoalIntCount)));
-	dev_dbg(&h->pdev->dev, "   Max outstanding commands = 0x%d\n",
+	dev_dbg(&h->pdev->dev, "   Max outstanding commands = 0x%x\n",
 	       readl(&(tb->CmdsOutMax)));
 	dev_dbg(&h->pdev->dev, "   Bus Types = 0x%x\n",
 		readl(&(tb->BusTypes)));

drivers/scsi/Kconfig

@@ -194,6 +194,7 @@ config CHR_DEV_SCH
 config SCSI_ENCLOSURE
 	tristate "SCSI Enclosure Support"
 	depends on SCSI && ENCLOSURE_SERVICES
+	depends on m || SCSI_SAS_ATTRS != m
 	help
 	  Enclosures are devices sitting on or in SCSI backplanes that
 	  manage devices.  If you have a disk cage, the chances are that
@@ -474,6 +475,7 @@ config SCSI_AACRAID
 source "drivers/scsi/aic7xxx/Kconfig.aic7xxx"
 source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
 source "drivers/scsi/aic94xx/Kconfig"
+source "drivers/scsi/hisi_sas/Kconfig"
 source "drivers/scsi/mvsas/Kconfig"
 
 config SCSI_MVUMI

drivers/scsi/Makefile

@@ -157,6 +157,7 @@ obj-$(CONFIG_CHR_DEV_SCH)	+= ch.o
 obj-$(CONFIG_SCSI_ENCLOSURE)	+= ses.o
 
 obj-$(CONFIG_SCSI_OSD_INITIATOR) += osd/
+obj-$(CONFIG_SCSI_HISI_SAS) += hisi_sas/
 
 # This goes last, so that "real" scsi devices probe earlier
 obj-$(CONFIG_SCSI_DEBUG)	+= scsi_debug.o

drivers/scsi/aacraid/linit.c

@@ -1318,7 +1318,7 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 }
 
 #if (defined(CONFIG_PM))
-void aac_release_resources(struct aac_dev *aac)
+static void aac_release_resources(struct aac_dev *aac)
 {
 	int i;
 

drivers/scsi/aic94xx/aic94xx_sas.h

@@ -327,46 +327,9 @@ struct scb_header {
 
 #define LUN_SIZE                8
 
-/* See SAS spec, task IU
- */
-struct ssp_task_iu {
-	u8     lun[LUN_SIZE];	  /* BE */
-	u16    _r_a;
-	u8     tmf;
-	u8     _r_b;
-	__be16 tag;		  /* BE */
-	u8     _r_c[14];
-} __attribute__ ((packed));
-
-/* See SAS spec, command IU
- */
-struct ssp_command_iu {
-	u8     lun[LUN_SIZE];
-	u8     _r_a;
-	u8     efb_prio_attr;	  /* enable first burst, task prio & attr */
-#define EFB_MASK        0x80
-#define TASK_PRIO_MASK	0x78
-#define TASK_ATTR_MASK  0x07
-
-	u8    _r_b;
-	u8     add_cdb_len;	  /* in dwords, since bit 0,1 are reserved */
-	union {
-		u8     cdb[16];
-		struct {
-			__le64 long_cdb_addr;	  /* bus address, LE */
-			__le32 long_cdb_size;	  /* LE */
-			u8     _r_c[3];
-			u8     eol_ds;		  /* eol:6,6, ds:5,4 */
-		} long_cdb;	  /* sequencer extension */
-	};
-} __attribute__ ((packed));
-
-struct xfer_rdy_iu {
-	__be32 requested_offset;  /* BE */
-	__be32 write_data_len;	  /* BE */
-	__be32 _r_a;
-} __attribute__ ((packed));
-
+#define EFB_MASK                0x80
+#define TASK_PRIO_MASK          0x78
+#define TASK_ATTR_MASK          0x07
 /* ---------- SCB tasks ---------- */
 
 /* This is both ssp_task and long_ssp_task
@@ -511,7 +474,7 @@ struct abort_task {
 	u8     proto_conn_rate;
 	__le32 _r_a;
 	struct ssp_frame_hdr ssp_frame;
-	struct ssp_task_iu ssp_task;
+	struct ssp_tmf_iu ssp_task;
 	__le16 sister_scb;
 	__le16 conn_handle;
 	u8     flags;	  /* ovrd_itnl_timer:3,3, suspend_data_trans:2,2 */
@@ -549,7 +512,7 @@ struct clear_nexus {
 	u8     _r_b[3];
 	u8     conn_mask;
 	u8     _r_c[19];
-	struct ssp_task_iu ssp_task; /* LUN and TAG */
+	struct ssp_tmf_iu ssp_task; /* LUN and TAG */
 	__le16 _r_d;
 	__le16 conn_handle;
 	__le64 _r_e;
@@ -562,7 +525,7 @@ struct initiate_ssp_tmf {
 	u8     proto_conn_rate;
 	__le32 _r_a;
 	struct ssp_frame_hdr ssp_frame;
-	struct ssp_task_iu ssp_task;
+	struct ssp_tmf_iu ssp_task;
 	__le16 sister_scb;
 	__le16 conn_handle;
 	u8     flags;	  /* itnl override and suspend data tx */

drivers/scsi/arcmsr/arcmsr.h

@@ -52,7 +52,7 @@ struct device_attribute;
 	#define ARCMSR_MAX_FREECCB_NUM	320
 #define ARCMSR_MAX_OUTSTANDING_CMD	255
 #endif
-#define ARCMSR_DRIVER_VERSION		"v1.30.00.04-20140919"
+#define ARCMSR_DRIVER_VERSION		"v1.30.00.22-20151126"
 #define ARCMSR_SCSI_INITIATOR_ID						255
 #define ARCMSR_MAX_XFER_SECTORS							512
 #define ARCMSR_MAX_XFER_SECTORS_B						4096
@@ -74,6 +74,9 @@ struct device_attribute;
 #ifndef PCI_DEVICE_ID_ARECA_1214
 	#define PCI_DEVICE_ID_ARECA_1214	0x1214
 #endif
+#ifndef PCI_DEVICE_ID_ARECA_1203
+	#define PCI_DEVICE_ID_ARECA_1203	0x1203
+#endif
 /*
 **********************************************************************************
 **
@@ -245,6 +248,12 @@ struct FIRMWARE_INFO
 /* window of "instruction flags" from iop to driver */
 #define ARCMSR_IOP2DRV_DOORBELL                       0x00020408
 #define ARCMSR_IOP2DRV_DOORBELL_MASK                  0x0002040C
+/* window of "instruction flags" from iop to driver */
+#define ARCMSR_IOP2DRV_DOORBELL_1203                  0x00021870
+#define ARCMSR_IOP2DRV_DOORBELL_MASK_1203             0x00021874
+/* window of "instruction flags" from driver to iop */
+#define ARCMSR_DRV2IOP_DOORBELL_1203                  0x00021878
+#define ARCMSR_DRV2IOP_DOORBELL_MASK_1203             0x0002187C
 /* ARECA FLAG LANGUAGE */
 /* ioctl transfer */
 #define ARCMSR_IOP2DRV_DATA_WRITE_OK                  0x00000001
@@ -288,6 +297,9 @@ struct FIRMWARE_INFO
 #define ARCMSR_MESSAGE_RBUFFER			      0x0000ff00
 /* iop message_rwbuffer for message command */
 #define ARCMSR_MESSAGE_RWBUFFER			      0x0000fa00
+
+#define MEM_BASE0(x)	(u32 __iomem *)((unsigned long)acb->mem_base0 + x)
+#define MEM_BASE1(x)	(u32 __iomem *)((unsigned long)acb->mem_base1 + x)
 /* 
 ************************************************************************
 **                SPEC. for Areca HBC adapter

drivers/scsi/arcmsr/arcmsr_hba.c

@@ -114,6 +114,7 @@ static void arcmsr_hardware_reset(struct AdapterControlBlock *acb);
 static const char *arcmsr_info(struct Scsi_Host *);
 static irqreturn_t arcmsr_interrupt(struct AdapterControlBlock *acb);
 static void arcmsr_free_irq(struct pci_dev *, struct AdapterControlBlock *);
+static void arcmsr_wait_firmware_ready(struct AdapterControlBlock *acb);
 static int arcmsr_adjust_disk_queue_depth(struct scsi_device *sdev, int queue_depth)
 {
 	if (queue_depth > ARCMSR_MAX_CMD_PERLUN)
@@ -157,6 +158,8 @@ static struct pci_device_id arcmsr_device_id_table[] = {
 		.driver_data = ACB_ADAPTER_TYPE_B},
 	{PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1202),
 		.driver_data = ACB_ADAPTER_TYPE_B},
+	{PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1203),
+		.driver_data = ACB_ADAPTER_TYPE_B},
 	{PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1210),
 		.driver_data = ACB_ADAPTER_TYPE_A},
 	{PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1214),
@@ -495,6 +498,91 @@ static void arcmsr_flush_adapter_cache(struct AdapterControlBlock *acb)
 	}
 }
 
+static bool arcmsr_alloc_io_queue(struct AdapterControlBlock *acb)
+{
+	bool rtn = true;
+	void *dma_coherent;
+	dma_addr_t dma_coherent_handle;
+	struct pci_dev *pdev = acb->pdev;
+
+	switch (acb->adapter_type) {
+	case ACB_ADAPTER_TYPE_B: {
+		struct MessageUnit_B *reg;
+		acb->roundup_ccbsize = roundup(sizeof(struct MessageUnit_B), 32);
+		dma_coherent = dma_zalloc_coherent(&pdev->dev, acb->roundup_ccbsize,
+			&dma_coherent_handle, GFP_KERNEL);
+		if (!dma_coherent) {
+			pr_notice("arcmsr%d: DMA allocation failed\n", acb->host->host_no);
+			return false;
+		}
+		acb->dma_coherent_handle2 = dma_coherent_handle;
+		acb->dma_coherent2 = dma_coherent;
+		reg = (struct MessageUnit_B *)dma_coherent;
+		acb->pmuB = reg;
+		if (acb->pdev->device == PCI_DEVICE_ID_ARECA_1203) {
+			reg->drv2iop_doorbell = MEM_BASE0(ARCMSR_DRV2IOP_DOORBELL_1203);
+			reg->drv2iop_doorbell_mask = MEM_BASE0(ARCMSR_DRV2IOP_DOORBELL_MASK_1203);
+			reg->iop2drv_doorbell = MEM_BASE0(ARCMSR_IOP2DRV_DOORBELL_1203);
+			reg->iop2drv_doorbell_mask = MEM_BASE0(ARCMSR_IOP2DRV_DOORBELL_MASK_1203);
+		} else {
+			reg->drv2iop_doorbell = MEM_BASE0(ARCMSR_DRV2IOP_DOORBELL);
+			reg->drv2iop_doorbell_mask = MEM_BASE0(ARCMSR_DRV2IOP_DOORBELL_MASK);
+			reg->iop2drv_doorbell = MEM_BASE0(ARCMSR_IOP2DRV_DOORBELL);
+			reg->iop2drv_doorbell_mask = MEM_BASE0(ARCMSR_IOP2DRV_DOORBELL_MASK);
+		}
+		reg->message_wbuffer = MEM_BASE1(ARCMSR_MESSAGE_WBUFFER);
+		reg->message_rbuffer = MEM_BASE1(ARCMSR_MESSAGE_RBUFFER);
+		reg->message_rwbuffer = MEM_BASE1(ARCMSR_MESSAGE_RWBUFFER);
+		}
+		break;
+	case ACB_ADAPTER_TYPE_D: {
+		struct MessageUnit_D *reg;
+
+		acb->roundup_ccbsize = roundup(sizeof(struct MessageUnit_D), 32);
+		dma_coherent = dma_zalloc_coherent(&pdev->dev, acb->roundup_ccbsize,
+			&dma_coherent_handle, GFP_KERNEL);
+		if (!dma_coherent) {
+			pr_notice("arcmsr%d: DMA allocation failed\n", acb->host->host_no);
+			return false;
+		}
+		acb->dma_coherent_handle2 = dma_coherent_handle;
+		acb->dma_coherent2 = dma_coherent;
+		reg = (struct MessageUnit_D *)dma_coherent;
+		acb->pmuD = reg;
+		reg->chip_id = MEM_BASE0(ARCMSR_ARC1214_CHIP_ID);
+		reg->cpu_mem_config = MEM_BASE0(ARCMSR_ARC1214_CPU_MEMORY_CONFIGURATION);
+		reg->i2o_host_interrupt_mask = MEM_BASE0(ARCMSR_ARC1214_I2_HOST_INTERRUPT_MASK);
+		reg->sample_at_reset = MEM_BASE0(ARCMSR_ARC1214_SAMPLE_RESET);
+		reg->reset_request = MEM_BASE0(ARCMSR_ARC1214_RESET_REQUEST);
+		reg->host_int_status = MEM_BASE0(ARCMSR_ARC1214_MAIN_INTERRUPT_STATUS);
+		reg->pcief0_int_enable = MEM_BASE0(ARCMSR_ARC1214_PCIE_F0_INTERRUPT_ENABLE);
+		reg->inbound_msgaddr0 = MEM_BASE0(ARCMSR_ARC1214_INBOUND_MESSAGE0);
+		reg->inbound_msgaddr1 = MEM_BASE0(ARCMSR_ARC1214_INBOUND_MESSAGE1);
+		reg->outbound_msgaddr0 = MEM_BASE0(ARCMSR_ARC1214_OUTBOUND_MESSAGE0);
+		reg->outbound_msgaddr1 = MEM_BASE0(ARCMSR_ARC1214_OUTBOUND_MESSAGE1);
+		reg->inbound_doorbell = MEM_BASE0(ARCMSR_ARC1214_INBOUND_DOORBELL);
+		reg->outbound_doorbell = MEM_BASE0(ARCMSR_ARC1214_OUTBOUND_DOORBELL);
+		reg->outbound_doorbell_enable = MEM_BASE0(ARCMSR_ARC1214_OUTBOUND_DOORBELL_ENABLE);
+		reg->inboundlist_base_low = MEM_BASE0(ARCMSR_ARC1214_INBOUND_LIST_BASE_LOW);
+		reg->inboundlist_base_high = MEM_BASE0(ARCMSR_ARC1214_INBOUND_LIST_BASE_HIGH);
+		reg->inboundlist_write_pointer = MEM_BASE0(ARCMSR_ARC1214_INBOUND_LIST_WRITE_POINTER);
+		reg->outboundlist_base_low = MEM_BASE0(ARCMSR_ARC1214_OUTBOUND_LIST_BASE_LOW);
+		reg->outboundlist_base_high = MEM_BASE0(ARCMSR_ARC1214_OUTBOUND_LIST_BASE_HIGH);
+		reg->outboundlist_copy_pointer = MEM_BASE0(ARCMSR_ARC1214_OUTBOUND_LIST_COPY_POINTER);
+		reg->outboundlist_read_pointer = MEM_BASE0(ARCMSR_ARC1214_OUTBOUND_LIST_READ_POINTER);
+		reg->outboundlist_interrupt_cause = MEM_BASE0(ARCMSR_ARC1214_OUTBOUND_INTERRUPT_CAUSE);
+		reg->outboundlist_interrupt_enable = MEM_BASE0(ARCMSR_ARC1214_OUTBOUND_INTERRUPT_ENABLE);
+		reg->message_wbuffer = MEM_BASE0(ARCMSR_ARC1214_MESSAGE_WBUFFER);
+		reg->message_rbuffer = MEM_BASE0(ARCMSR_ARC1214_MESSAGE_RBUFFER);
+		reg->msgcode_rwbuffer = MEM_BASE0(ARCMSR_ARC1214_MESSAGE_RWBUFFER);
+		}
+		break;
+	default:
+		break;
+	}
+	return rtn;
+}
+
 static int arcmsr_alloc_ccb_pool(struct AdapterControlBlock *acb)
 {
 	struct pci_dev *pdev = acb->pdev;
@@ -739,9 +827,12 @@ static int arcmsr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	if(!error){
 		goto pci_release_regs;
 	}
+	error = arcmsr_alloc_io_queue(acb);
+	if (!error)
+		goto unmap_pci_region;
 	error = arcmsr_get_firmware_spec(acb);
 	if(!error){
-		goto unmap_pci_region;
+		goto free_hbb_mu;
 	}
 	error = arcmsr_alloc_ccb_pool(acb);
 	if(error){
@@ -2622,9 +2713,6 @@ static bool arcmsr_hbaA_get_config(struct AdapterControlBlock *acb)
 static bool arcmsr_hbaB_get_config(struct AdapterControlBlock *acb)
 {
 	struct MessageUnit_B *reg = acb->pmuB;
-	struct pci_dev *pdev = acb->pdev;
-	void *dma_coherent;
-	dma_addr_t dma_coherent_handle;
 	char *acb_firm_model = acb->firm_model;
 	char *acb_firm_version = acb->firm_version;
 	char *acb_device_map = acb->device_map;
@@ -2636,30 +2724,16 @@ static bool arcmsr_hbaB_get_config(struct AdapterControlBlock *acb)
 	/*firm_version,21,84-99*/
 	int count;
 
-	acb->roundup_ccbsize = roundup(sizeof(struct MessageUnit_B), 32);
-	dma_coherent = dma_alloc_coherent(&pdev->dev, acb->roundup_ccbsize,
-			&dma_coherent_handle, GFP_KERNEL);
-	if (!dma_coherent){
-		printk(KERN_NOTICE
-			"arcmsr%d: dma_alloc_coherent got error for hbb mu\n",
-			acb->host->host_no);
-		return false;
-	}
-	acb->dma_coherent_handle2 = dma_coherent_handle;
-	acb->dma_coherent2 = dma_coherent;
-	reg = (struct MessageUnit_B *)dma_coherent;
-	acb->pmuB = reg;
-	reg->drv2iop_doorbell= (uint32_t __iomem *)((unsigned long)acb->mem_base0 + ARCMSR_DRV2IOP_DOORBELL);
-	reg->drv2iop_doorbell_mask = (uint32_t __iomem *)((unsigned long)acb->mem_base0 + ARCMSR_DRV2IOP_DOORBELL_MASK);
-	reg->iop2drv_doorbell = (uint32_t __iomem *)((unsigned long)acb->mem_base0 + ARCMSR_IOP2DRV_DOORBELL);
-	reg->iop2drv_doorbell_mask = (uint32_t __iomem *)((unsigned long)acb->mem_base0 + ARCMSR_IOP2DRV_DOORBELL_MASK);
-	reg->message_wbuffer = (uint32_t __iomem *)((unsigned long)acb->mem_base1 + ARCMSR_MESSAGE_WBUFFER);
-	reg->message_rbuffer =  (uint32_t __iomem *)((unsigned long)acb->mem_base1 + ARCMSR_MESSAGE_RBUFFER);
-	reg->message_rwbuffer = (uint32_t __iomem *)((unsigned long)acb->mem_base1 + ARCMSR_MESSAGE_RWBUFFER);
 	iop_firm_model = (char __iomem *)(&reg->message_rwbuffer[15]);	/*firm_model,15,60-67*/
 	iop_firm_version = (char __iomem *)(&reg->message_rwbuffer[17]);	/*firm_version,17,68-83*/
 	iop_device_map = (char __iomem *)(&reg->message_rwbuffer[21]);	/*firm_version,21,84-99*/
 
+	arcmsr_wait_firmware_ready(acb);
+	writel(ARCMSR_MESSAGE_START_DRIVER_MODE, reg->drv2iop_doorbell);
+	if (!arcmsr_hbaB_wait_msgint_ready(acb)) {
+		printk(KERN_ERR "arcmsr%d: can't set driver mode.\n", acb->host->host_no);
+		return false;
+	}
 	writel(ARCMSR_MESSAGE_GET_CONFIG, reg->drv2iop_doorbell);
 	if (!arcmsr_hbaB_wait_msgint_ready(acb)) {
 		printk(KERN_NOTICE "arcmsr%d: wait 'get adapter firmware \
@@ -2694,15 +2768,15 @@ static bool arcmsr_hbaB_get_config(struct AdapterControlBlock *acb)
 		acb->firm_model,
 		acb->firm_version);
 
-	acb->signature = readl(&reg->message_rwbuffer[1]);
+	acb->signature = readl(&reg->message_rwbuffer[0]);
 	/*firm_signature,1,00-03*/
-	acb->firm_request_len = readl(&reg->message_rwbuffer[2]);
+	acb->firm_request_len = readl(&reg->message_rwbuffer[1]);
 	/*firm_request_len,1,04-07*/
-	acb->firm_numbers_queue = readl(&reg->message_rwbuffer[3]);
+	acb->firm_numbers_queue = readl(&reg->message_rwbuffer[2]);
 	/*firm_numbers_queue,2,08-11*/
-	acb->firm_sdram_size = readl(&reg->message_rwbuffer[4]);
+	acb->firm_sdram_size = readl(&reg->message_rwbuffer[3]);
 	/*firm_sdram_size,3,12-15*/
-	acb->firm_hd_channels = readl(&reg->message_rwbuffer[5]);
+	acb->firm_hd_channels = readl(&reg->message_rwbuffer[4]);
 	/*firm_ide_channels,4,16-19*/
 	acb->firm_cfg_version = readl(&reg->message_rwbuffer[25]);  /*firm_cfg_version,25,100-103*/
 	/*firm_ide_channels,4,16-19*/
@@ -2777,70 +2851,8 @@ static bool arcmsr_hbaD_get_config(struct AdapterControlBlock *acb)
 	char __iomem *iop_firm_version;
 	char __iomem *iop_device_map;
 	u32 count;
-	struct MessageUnit_D *reg;
-	void *dma_coherent2;
-	dma_addr_t dma_coherent_handle2;
-	struct pci_dev *pdev = acb->pdev;
+	struct MessageUnit_D *reg = acb->pmuD;
 
-	acb->roundup_ccbsize = roundup(sizeof(struct MessageUnit_D), 32);
-	dma_coherent2 = dma_alloc_coherent(&pdev->dev, acb->roundup_ccbsize,
-		&dma_coherent_handle2, GFP_KERNEL);
-	if (!dma_coherent2) {
-		pr_notice("DMA allocation failed...\n");
-		return false;
-	}
-	memset(dma_coherent2, 0, acb->roundup_ccbsize);
-	acb->dma_coherent_handle2 = dma_coherent_handle2;
-	acb->dma_coherent2 = dma_coherent2;
-	reg = (struct MessageUnit_D *)dma_coherent2;
-	acb->pmuD = reg;
-	reg->chip_id = acb->mem_base0 + ARCMSR_ARC1214_CHIP_ID;
-	reg->cpu_mem_config = acb->mem_base0 +
-		ARCMSR_ARC1214_CPU_MEMORY_CONFIGURATION;
-	reg->i2o_host_interrupt_mask = acb->mem_base0 +
-		ARCMSR_ARC1214_I2_HOST_INTERRUPT_MASK;
-	reg->sample_at_reset = acb->mem_base0 + ARCMSR_ARC1214_SAMPLE_RESET;
-	reg->reset_request = acb->mem_base0 + ARCMSR_ARC1214_RESET_REQUEST;
-	reg->host_int_status = acb->mem_base0 +
-		ARCMSR_ARC1214_MAIN_INTERRUPT_STATUS;
-	reg->pcief0_int_enable = acb->mem_base0 +
-		ARCMSR_ARC1214_PCIE_F0_INTERRUPT_ENABLE;
-	reg->inbound_msgaddr0 = acb->mem_base0 +
-		ARCMSR_ARC1214_INBOUND_MESSAGE0;
-	reg->inbound_msgaddr1 = acb->mem_base0 +
-		ARCMSR_ARC1214_INBOUND_MESSAGE1;
-	reg->outbound_msgaddr0 = acb->mem_base0 +
-		ARCMSR_ARC1214_OUTBOUND_MESSAGE0;
-	reg->outbound_msgaddr1 = acb->mem_base0 +
-		ARCMSR_ARC1214_OUTBOUND_MESSAGE1;
-	reg->inbound_doorbell = acb->mem_base0 +
-		ARCMSR_ARC1214_INBOUND_DOORBELL;
-	reg->outbound_doorbell = acb->mem_base0 +
-		ARCMSR_ARC1214_OUTBOUND_DOORBELL;
-	reg->outbound_doorbell_enable = acb->mem_base0 +
-		ARCMSR_ARC1214_OUTBOUND_DOORBELL_ENABLE;
-	reg->inboundlist_base_low = acb->mem_base0 +
-		ARCMSR_ARC1214_INBOUND_LIST_BASE_LOW;
-	reg->inboundlist_base_high = acb->mem_base0 +
-		ARCMSR_ARC1214_INBOUND_LIST_BASE_HIGH;
-	reg->inboundlist_write_pointer = acb->mem_base0 +
-		ARCMSR_ARC1214_INBOUND_LIST_WRITE_POINTER;
-	reg->outboundlist_base_low = acb->mem_base0 +
-		ARCMSR_ARC1214_OUTBOUND_LIST_BASE_LOW;
-	reg->outboundlist_base_high = acb->mem_base0 +
-		ARCMSR_ARC1214_OUTBOUND_LIST_BASE_HIGH;
-	reg->outboundlist_copy_pointer = acb->mem_base0 +
-		ARCMSR_ARC1214_OUTBOUND_LIST_COPY_POINTER;
-	reg->outboundlist_read_pointer = acb->mem_base0 +
-		ARCMSR_ARC1214_OUTBOUND_LIST_READ_POINTER;
-	reg->outboundlist_interrupt_cause = acb->mem_base0 +
-		ARCMSR_ARC1214_OUTBOUND_INTERRUPT_CAUSE;
-	reg->outboundlist_interrupt_enable = acb->mem_base0 +
-		ARCMSR_ARC1214_OUTBOUND_INTERRUPT_ENABLE;
-	reg->message_wbuffer = acb->mem_base0 + ARCMSR_ARC1214_MESSAGE_WBUFFER;
-	reg->message_rbuffer = acb->mem_base0 + ARCMSR_ARC1214_MESSAGE_RBUFFER;
-	reg->msgcode_rwbuffer = acb->mem_base0 +
-		ARCMSR_ARC1214_MESSAGE_RWBUFFER;
 	iop_firm_model = (char __iomem *)(&reg->msgcode_rwbuffer[15]);
 	iop_firm_version = (char __iomem *)(&reg->msgcode_rwbuffer[17]);
 	iop_device_map = (char __iomem *)(&reg->msgcode_rwbuffer[21]);
@@ -2855,8 +2867,6 @@ static bool arcmsr_hbaD_get_config(struct AdapterControlBlock *acb)
 	if (!arcmsr_hbaD_wait_msgint_ready(acb)) {
 		pr_notice("arcmsr%d: wait get adapter firmware "
 			"miscellaneous data timeout\n", acb->host->host_no);
-		dma_free_coherent(&acb->pdev->dev, acb->roundup_ccbsize,
-			acb->dma_coherent2, acb->dma_coherent_handle2);
 		return false;
 	}
 	count = 8;
@@ -2880,15 +2890,15 @@ static bool arcmsr_hbaD_get_config(struct AdapterControlBlock *acb)
 		iop_device_map++;
 		count--;
 	}
-	acb->signature = readl(&reg->msgcode_rwbuffer[1]);
+	acb->signature = readl(&reg->msgcode_rwbuffer[0]);
 	/*firm_signature,1,00-03*/
-	acb->firm_request_len = readl(&reg->msgcode_rwbuffer[2]);
+	acb->firm_request_len = readl(&reg->msgcode_rwbuffer[1]);
 	/*firm_request_len,1,04-07*/
-	acb->firm_numbers_queue = readl(&reg->msgcode_rwbuffer[3]);
+	acb->firm_numbers_queue = readl(&reg->msgcode_rwbuffer[2]);
 	/*firm_numbers_queue,2,08-11*/
-	acb->firm_sdram_size = readl(&reg->msgcode_rwbuffer[4]);
+	acb->firm_sdram_size = readl(&reg->msgcode_rwbuffer[3]);
 	/*firm_sdram_size,3,12-15*/
-	acb->firm_hd_channels = readl(&reg->msgcode_rwbuffer[5]);
+	acb->firm_hd_channels = readl(&reg->msgcode_rwbuffer[4]);
 	/*firm_hd_channels,4,16-19*/
 	acb->firm_cfg_version = readl(&reg->msgcode_rwbuffer[25]);
 	pr_notice("Areca RAID Controller%d: Model %s, F/W %s\n",
@@ -3998,6 +4008,7 @@ static const char *arcmsr_info(struct Scsi_Host *host)
 	case PCI_DEVICE_ID_ARECA_1160:
 	case PCI_DEVICE_ID_ARECA_1170:
 	case PCI_DEVICE_ID_ARECA_1201:
+	case PCI_DEVICE_ID_ARECA_1203:
 	case PCI_DEVICE_ID_ARECA_1220:
 	case PCI_DEVICE_ID_ARECA_1230:
 	case PCI_DEVICE_ID_ARECA_1260:

drivers/scsi/atp870u.h

@@ -26,22 +26,18 @@ struct atp_unit
 	unsigned long baseport;
 	unsigned long ioport[2];
 	unsigned long pciport[2];
-	unsigned long irq;
 	unsigned char last_cmd[2];
 	unsigned char in_snd[2];
 	unsigned char in_int[2];
 	unsigned char quhd[2];
 	unsigned char quend[2];
 	unsigned char global_map[2];
-	unsigned char chip_ver;
-	unsigned char scam_on;
 	unsigned char host_id[2];
 	unsigned int working[2];
 	unsigned short wide_id[2];
 	unsigned short active_id[2];
 	unsigned short ultra_map[2];
 	unsigned short async[2];
-	unsigned short dev_id;
 	unsigned char sp[2][16];
 	unsigned char r1f[2][16];		
 	struct scsi_cmnd *quereq[2][qcnt];

drivers/scsi/bfa/bfa.h

 /*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
  * All rights reserved
- * www.brocade.com
+ * www.qlogic.com
  *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License (GPL) Version 2 as

drivers/scsi/bfa/bfa_core.c

 /*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
  * All rights reserved
- * www.brocade.com
+ * www.qlogic.com
  *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License (GPL) Version 2 as

drivers/scsi/cxlflash/common.h

@@ -165,6 +165,8 @@ struct afu {
 	struct sisl_host_map __iomem *host_map;		/* MC host map */
 	struct sisl_ctrl_map __iomem *ctrl_map;		/* MC control map */
 
+	struct kref mapcount;
+
 	ctx_hndl_t ctx_hndl;	/* master's context handle */
 	u64 *hrrq_start;
 	u64 *hrrq_end;