drm/i915: DSPFW and BLC regs are in the display offset range

Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_reg.h

@@ -1923,7 +1923,7 @@
 #define PFIT_AUTO_RATIOS (dev_priv->info->display_mmio_offset + 0x61238)
 
 /* Backlight control */
-#define BLC_PWM_CTL2		0x61250 /* 965+ only */
+#define BLC_PWM_CTL2	(dev_priv->info->display_mmio_offset + 0x61250) /* 965+ only */
 #define   BLM_PWM_ENABLE		(1 << 31)
 #define   BLM_COMBINATION_MODE		(1 << 30) /* gen4 only */
 #define   BLM_PIPE_SELECT		(1 << 29)
@@ -1942,7 +1942,7 @@
 #define   BLM_PHASE_IN_COUNT_MASK	(0xff << 8)
 #define   BLM_PHASE_IN_INCR_SHIFT	(0)
 #define   BLM_PHASE_IN_INCR_MASK	(0xff << 0)
-#define BLC_PWM_CTL		0x61254
+#define BLC_PWM_CTL	(dev_priv->info->display_mmio_offset + 0x61254)
 /*
  * This is the most significant 15 bits of the number of backlight cycles in a
  * complete cycle of the modulated backlight control.
@@ -1964,7 +1964,7 @@
 #define   BACKLIGHT_DUTY_CYCLE_MASK_PNV		(0xfffe)
 #define   BLM_POLARITY_PNV			(1 << 0) /* pnv only */
 
-#define BLC_HIST_CTL		0x61260
+#define BLC_HIST_CTL	(dev_priv->info->display_mmio_offset + 0x61260)
 
 /* New registers for PCH-split platforms. Safe where new bits show up, the
  * register layout machtes with gen4 BLC_PWM_CTL[12]. */
@@ -2801,6 +2801,8 @@
 #define   DSPFW_HPLL_CURSOR_SHIFT	16
 #define   DSPFW_HPLL_CURSOR_MASK	(0x3f<<16)
 #define   DSPFW_HPLL_SR_MASK		(0x1ff)
+#define DSPFW4			(dev_priv->info->display_mmio_offset + 0x70070)
+#define DSPFW7			(dev_priv->info->display_mmio_offset + 0x7007c)
 
 /* drain latency register values*/
 #define DRAIN_LATENCY_PRECISION_32	32