amd-xgbe: use enums for mailbox cmd and sub_cmds

Instead of using hardcoded values, use enumerations for mailbox command
and sub commands.
Signed-off-by: NRaju Rangoju <Raju.Rangoju@amd.com>
Acked-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c

@@ -1989,7 +1989,7 @@ static void xgbe_phy_pll_ctrl(struct xgbe_prv_data *pdata, bool enable)
 }
 
 static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
-					unsigned int cmd, unsigned int sub_cmd)
+					enum xgbe_mb_cmd cmd, enum xgbe_mb_subcmd sub_cmd)
 {
 	unsigned int s0 = 0;
 	unsigned int wait;
@@ -2036,7 +2036,7 @@ static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
 static void xgbe_phy_rrc(struct xgbe_prv_data *pdata)
 {
 	/* Receiver Reset Cycle */
-	xgbe_phy_perform_ratechange(pdata, 5, 0);
+	xgbe_phy_perform_ratechange(pdata, XGBE_MB_CMD_RRC, XGBE_MB_SUBCMD_NONE);
 
 	netif_dbg(pdata, link, pdata->netdev, "receiver reset complete\n");
 }
@@ -2046,7 +2046,7 @@ static void xgbe_phy_power_off(struct xgbe_prv_data *pdata)
 	struct xgbe_phy_data *phy_data = pdata->phy_data;
 
 	/* Power off */
-	xgbe_phy_perform_ratechange(pdata, 0, 0);
+	xgbe_phy_perform_ratechange(pdata, XGBE_MB_CMD_POWER_OFF, XGBE_MB_SUBCMD_NONE);
 
 	phy_data->cur_mode = XGBE_MODE_UNKNOWN;
 
@@ -2061,14 +2061,17 @@ static void xgbe_phy_sfi_mode(struct xgbe_prv_data *pdata)
 
 	/* 10G/SFI */
 	if (phy_data->sfp_cable != XGBE_SFP_CABLE_PASSIVE) {
-		xgbe_phy_perform_ratechange(pdata, 3, 0);
+		xgbe_phy_perform_ratechange(pdata, XGBE_MB_CMD_SET_10G_SFI, XGBE_MB_SUBCMD_ACTIVE);
 	} else {
 		if (phy_data->sfp_cable_len <= 1)
-			xgbe_phy_perform_ratechange(pdata, 3, 1);
+			xgbe_phy_perform_ratechange(pdata, XGBE_MB_CMD_SET_10G_SFI,
+						    XGBE_MB_SUBCMD_PASSIVE_1M);
 		else if (phy_data->sfp_cable_len <= 3)
-			xgbe_phy_perform_ratechange(pdata, 3, 2);
+			xgbe_phy_perform_ratechange(pdata, XGBE_MB_CMD_SET_10G_SFI,
+						    XGBE_MB_SUBCMD_PASSIVE_3M);
 		else
-			xgbe_phy_perform_ratechange(pdata, 3, 3);
+			xgbe_phy_perform_ratechange(pdata, XGBE_MB_CMD_SET_10G_SFI,
+						    XGBE_MB_SUBCMD_PASSIVE_OTHER);
 	}
 
 	phy_data->cur_mode = XGBE_MODE_SFI;
@@ -2083,7 +2086,7 @@ static void xgbe_phy_x_mode(struct xgbe_prv_data *pdata)
 	xgbe_phy_set_redrv_mode(pdata);
 
 	/* 1G/X */
-	xgbe_phy_perform_ratechange(pdata, 1, 3);
+	xgbe_phy_perform_ratechange(pdata, XGBE_MB_CMD_SET_1G, XGBE_MB_SUBCMD_1G_KX);
 
 	phy_data->cur_mode = XGBE_MODE_X;
 
@@ -2097,7 +2100,7 @@ static void xgbe_phy_sgmii_1000_mode(struct xgbe_prv_data *pdata)
 	xgbe_phy_set_redrv_mode(pdata);
 
 	/* 1G/SGMII */
-	xgbe_phy_perform_ratechange(pdata, 1, 2);
+	xgbe_phy_perform_ratechange(pdata, XGBE_MB_CMD_SET_1G, XGBE_MB_SUBCMD_1G_SGMII);
 
 	phy_data->cur_mode = XGBE_MODE_SGMII_1000;
 
@@ -2111,7 +2114,7 @@ static void xgbe_phy_sgmii_100_mode(struct xgbe_prv_data *pdata)
 	xgbe_phy_set_redrv_mode(pdata);
 
 	/* 100M/SGMII */
-	xgbe_phy_perform_ratechange(pdata, 1, 1);
+	xgbe_phy_perform_ratechange(pdata, XGBE_MB_CMD_SET_1G, XGBE_MB_SUBCMD_100MBITS);
 
 	phy_data->cur_mode = XGBE_MODE_SGMII_100;
 
@@ -2125,7 +2128,7 @@ static void xgbe_phy_kr_mode(struct xgbe_prv_data *pdata)
 	xgbe_phy_set_redrv_mode(pdata);
 
 	/* 10G/KR */
-	xgbe_phy_perform_ratechange(pdata, 4, 0);
+	xgbe_phy_perform_ratechange(pdata, XGBE_MB_CMD_SET_10G_KR, XGBE_MB_SUBCMD_NONE);
 
 	phy_data->cur_mode = XGBE_MODE_KR;
 
@@ -2139,7 +2142,7 @@ static void xgbe_phy_kx_2500_mode(struct xgbe_prv_data *pdata)
 	xgbe_phy_set_redrv_mode(pdata);
 
 	/* 2.5G/KX */
-	xgbe_phy_perform_ratechange(pdata, 2, 0);
+	xgbe_phy_perform_ratechange(pdata, XGBE_MB_CMD_SET_2_5G, XGBE_MB_SUBCMD_NONE);
 
 	phy_data->cur_mode = XGBE_MODE_KX_2500;
 
@@ -2153,7 +2156,7 @@ static void xgbe_phy_kx_1000_mode(struct xgbe_prv_data *pdata)
 	xgbe_phy_set_redrv_mode(pdata);
 
 	/* 1G/KX */
-	xgbe_phy_perform_ratechange(pdata, 1, 3);
+	xgbe_phy_perform_ratechange(pdata, XGBE_MB_CMD_SET_1G, XGBE_MB_SUBCMD_1G_KX);
 
 	phy_data->cur_mode = XGBE_MODE_KX_1000;
 

drivers/net/ethernet/amd/xgbe/xgbe.h

@@ -611,6 +611,31 @@ enum xgbe_mdio_mode {
 	XGBE_MDIO_MODE_CL45,
 };
 
+enum xgbe_mb_cmd {
+	XGBE_MB_CMD_POWER_OFF = 0,
+	XGBE_MB_CMD_SET_1G,
+	XGBE_MB_CMD_SET_2_5G,
+	XGBE_MB_CMD_SET_10G_SFI,
+	XGBE_MB_CMD_SET_10G_KR,
+	XGBE_MB_CMD_RRC
+};
+
+enum xgbe_mb_subcmd {
+	XGBE_MB_SUBCMD_NONE = 0,
+
+	/* 10GbE SFP subcommands */
+	XGBE_MB_SUBCMD_ACTIVE = 0,
+	XGBE_MB_SUBCMD_PASSIVE_1M,
+	XGBE_MB_SUBCMD_PASSIVE_3M,
+	XGBE_MB_SUBCMD_PASSIVE_OTHER,
+
+	/* 1GbE Mode subcommands */
+	XGBE_MB_SUBCMD_10MBITS = 0,
+	XGBE_MB_SUBCMD_100MBITS,
+	XGBE_MB_SUBCMD_1G_SGMII,
+	XGBE_MB_SUBCMD_1G_KX
+};
+
 struct xgbe_phy {
 	struct ethtool_link_ksettings lks;