提交 1226337a 编写于 作者: T Tomer Tayar 提交者: David S. Miller

qed: Correct HW stop flow

Management firmware is used as arbiter between different PFs
which are loading/unloading, but in order to use the synchronization
it offers the contending configurations need to be applied either
between their LOAD_REQ <-> LOAD_DONE or UNLOAD_REQ <-> UNLOAD_DONE
management firmware commands.

Existing HW stop flow utilizes 2 different functions: qed_hw_stop() and
qed_hw_reset() which don't abide this requirement; Most of the closure
is doing outside the scope of the unload request.

This patch removes qed_hw_reset() and places the relevant stop
functionality underneath the management firmware protection.
Signed-off-by: NTomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 30b38236
...@@ -732,5 +732,6 @@ void qed_get_protocol_stats(struct qed_dev *cdev, ...@@ -732,5 +732,6 @@ void qed_get_protocol_stats(struct qed_dev *cdev,
enum qed_mcp_protocol_type type, enum qed_mcp_protocol_type type,
union qed_mcp_protocol_stats *stats); union qed_mcp_protocol_stats *stats);
int qed_slowpath_irq_req(struct qed_hwfn *hwfn); int qed_slowpath_irq_req(struct qed_hwfn *hwfn);
void qed_slowpath_irq_sync(struct qed_hwfn *p_hwfn);
#endif /* _QED_H */ #endif /* _QED_H */
...@@ -1303,27 +1303,53 @@ void qed_hw_timers_stop_all(struct qed_dev *cdev) ...@@ -1303,27 +1303,53 @@ void qed_hw_timers_stop_all(struct qed_dev *cdev)
int qed_hw_stop(struct qed_dev *cdev) int qed_hw_stop(struct qed_dev *cdev)
{ {
int rc = 0, t_rc; struct qed_hwfn *p_hwfn;
struct qed_ptt *p_ptt;
int rc, rc2 = 0;
int j; int j;
for_each_hwfn(cdev, j) { for_each_hwfn(cdev, j) {
struct qed_hwfn *p_hwfn = &cdev->hwfns[j]; p_hwfn = &cdev->hwfns[j];
struct qed_ptt *p_ptt = p_hwfn->p_main_ptt; p_ptt = p_hwfn->p_main_ptt;
DP_VERBOSE(p_hwfn, NETIF_MSG_IFDOWN, "Stopping hw/fw\n"); DP_VERBOSE(p_hwfn, NETIF_MSG_IFDOWN, "Stopping hw/fw\n");
if (IS_VF(cdev)) { if (IS_VF(cdev)) {
qed_vf_pf_int_cleanup(p_hwfn); qed_vf_pf_int_cleanup(p_hwfn);
rc = qed_vf_pf_reset(p_hwfn);
if (rc) {
DP_NOTICE(p_hwfn,
"qed_vf_pf_reset failed. rc = %d.\n",
rc);
rc2 = -EINVAL;
}
continue; continue;
} }
/* mark the hw as uninitialized... */ /* mark the hw as uninitialized... */
p_hwfn->hw_init_done = false; p_hwfn->hw_init_done = false;
/* Send unload command to MCP */
rc = qed_mcp_unload_req(p_hwfn, p_ptt);
if (rc) {
DP_NOTICE(p_hwfn,
"Failed sending a UNLOAD_REQ command. rc = %d.\n",
rc);
rc2 = -EINVAL;
}
qed_slowpath_irq_sync(p_hwfn);
/* After this point no MFW attentions are expected, e.g. prevent
* race between pf stop and dcbx pf update.
*/
rc = qed_sp_pf_stop(p_hwfn); rc = qed_sp_pf_stop(p_hwfn);
if (rc) if (rc) {
DP_NOTICE(p_hwfn, DP_NOTICE(p_hwfn,
"Failed to close PF against FW. Continue to stop HW to prevent illegal host access by the device\n"); "Failed to close PF against FW [rc = %d]. Continue to stop HW to prevent illegal host access by the device.\n",
rc);
rc2 = -EINVAL;
}
qed_wr(p_hwfn, p_ptt, qed_wr(p_hwfn, p_ptt,
NIG_REG_RX_LLH_BRB_GATE_DNTFWD_PERPF, 0x1); NIG_REG_RX_LLH_BRB_GATE_DNTFWD_PERPF, 0x1);
...@@ -1346,20 +1372,37 @@ int qed_hw_stop(struct qed_dev *cdev) ...@@ -1346,20 +1372,37 @@ int qed_hw_stop(struct qed_dev *cdev)
/* Need to wait 1ms to guarantee SBs are cleared */ /* Need to wait 1ms to guarantee SBs are cleared */
usleep_range(1000, 2000); usleep_range(1000, 2000);
/* Disable PF in HW blocks */
qed_wr(p_hwfn, p_ptt, DORQ_REG_PF_DB_ENABLE, 0);
qed_wr(p_hwfn, p_ptt, QM_REG_PF_EN, 0);
qed_mcp_unload_done(p_hwfn, p_ptt);
if (rc) {
DP_NOTICE(p_hwfn,
"Failed sending a UNLOAD_DONE command. rc = %d.\n",
rc);
rc2 = -EINVAL;
}
} }
if (IS_PF(cdev)) { if (IS_PF(cdev)) {
p_hwfn = QED_LEADING_HWFN(cdev);
p_ptt = QED_LEADING_HWFN(cdev)->p_main_ptt;
/* Disable DMAE in PXP - in CMT, this should only be done for /* Disable DMAE in PXP - in CMT, this should only be done for
* first hw-function, and only after all transactions have * first hw-function, and only after all transactions have
* stopped for all active hw-functions. * stopped for all active hw-functions.
*/ */
t_rc = qed_change_pci_hwfn(&cdev->hwfns[0], rc = qed_change_pci_hwfn(p_hwfn, p_ptt, false);
cdev->hwfns[0].p_main_ptt, false); if (rc) {
if (t_rc != 0) DP_NOTICE(p_hwfn,
rc = t_rc; "qed_change_pci_hwfn failed. rc = %d.\n", rc);
rc2 = -EINVAL;
}
} }
return rc; return rc2;
} }
void qed_hw_stop_fastpath(struct qed_dev *cdev) void qed_hw_stop_fastpath(struct qed_dev *cdev)
...@@ -1404,89 +1447,6 @@ void qed_hw_start_fastpath(struct qed_hwfn *p_hwfn) ...@@ -1404,89 +1447,6 @@ void qed_hw_start_fastpath(struct qed_hwfn *p_hwfn)
NIG_REG_RX_LLH_BRB_GATE_DNTFWD_PERPF, 0x0); NIG_REG_RX_LLH_BRB_GATE_DNTFWD_PERPF, 0x0);
} }
static int qed_reg_assert(struct qed_hwfn *p_hwfn,
struct qed_ptt *p_ptt, u32 reg, bool expected)
{
u32 assert_val = qed_rd(p_hwfn, p_ptt, reg);
if (assert_val != expected) {
DP_NOTICE(p_hwfn, "Value at address 0x%08x != 0x%08x\n",
reg, expected);
return -EINVAL;
}
return 0;
}
int qed_hw_reset(struct qed_dev *cdev)
{
int rc = 0;
u32 unload_resp, unload_param;
u32 wol_param;
int i;
switch (cdev->wol_config) {
case QED_OV_WOL_DISABLED:
wol_param = DRV_MB_PARAM_UNLOAD_WOL_DISABLED;
break;
case QED_OV_WOL_ENABLED:
wol_param = DRV_MB_PARAM_UNLOAD_WOL_ENABLED;
break;
default:
DP_NOTICE(cdev,
"Unknown WoL configuration %02x\n", cdev->wol_config);
/* Fallthrough */
case QED_OV_WOL_DEFAULT:
wol_param = DRV_MB_PARAM_UNLOAD_WOL_MCP;
}
for_each_hwfn(cdev, i) {
struct qed_hwfn *p_hwfn = &cdev->hwfns[i];
if (IS_VF(cdev)) {
rc = qed_vf_pf_reset(p_hwfn);
if (rc)
return rc;
continue;
}
DP_VERBOSE(p_hwfn, NETIF_MSG_IFDOWN, "Resetting hw/fw\n");
/* Check for incorrect states */
qed_reg_assert(p_hwfn, p_hwfn->p_main_ptt,
QM_REG_USG_CNT_PF_TX, 0);
qed_reg_assert(p_hwfn, p_hwfn->p_main_ptt,
QM_REG_USG_CNT_PF_OTHER, 0);
/* Disable PF in HW blocks */
qed_wr(p_hwfn, p_hwfn->p_main_ptt, DORQ_REG_PF_DB_ENABLE, 0);
qed_wr(p_hwfn, p_hwfn->p_main_ptt, QM_REG_PF_EN, 0);
qed_wr(p_hwfn, p_hwfn->p_main_ptt,
TCFC_REG_STRONG_ENABLE_PF, 0);
qed_wr(p_hwfn, p_hwfn->p_main_ptt,
CCFC_REG_STRONG_ENABLE_PF, 0);
/* Send unload command to MCP */
rc = qed_mcp_cmd(p_hwfn, p_hwfn->p_main_ptt,
DRV_MSG_CODE_UNLOAD_REQ, wol_param,
&unload_resp, &unload_param);
if (rc) {
DP_NOTICE(p_hwfn, "qed_hw_reset: UNLOAD_REQ failed\n");
unload_resp = FW_MSG_CODE_DRV_UNLOAD_ENGINE;
}
rc = qed_mcp_cmd(p_hwfn, p_hwfn->p_main_ptt,
DRV_MSG_CODE_UNLOAD_DONE,
0, &unload_resp, &unload_param);
if (rc) {
DP_NOTICE(p_hwfn, "qed_hw_reset: UNLOAD_DONE failed\n");
return rc;
}
}
return rc;
}
/* Free hwfn memory and resources acquired in hw_hwfn_prepare */ /* Free hwfn memory and resources acquired in hw_hwfn_prepare */
static void qed_hw_hwfn_free(struct qed_hwfn *p_hwfn) static void qed_hw_hwfn_free(struct qed_hwfn *p_hwfn)
{ {
......
...@@ -140,14 +140,6 @@ void qed_hw_stop_fastpath(struct qed_dev *cdev); ...@@ -140,14 +140,6 @@ void qed_hw_stop_fastpath(struct qed_dev *cdev);
*/ */
void qed_hw_start_fastpath(struct qed_hwfn *p_hwfn); void qed_hw_start_fastpath(struct qed_hwfn *p_hwfn);
/**
* @brief qed_hw_reset -
*
* @param cdev
*
* @return int
*/
int qed_hw_reset(struct qed_dev *cdev);
/** /**
* @brief qed_hw_prepare - * @brief qed_hw_prepare -
......
...@@ -589,6 +589,19 @@ int qed_slowpath_irq_req(struct qed_hwfn *hwfn) ...@@ -589,6 +589,19 @@ int qed_slowpath_irq_req(struct qed_hwfn *hwfn)
return rc; return rc;
} }
void qed_slowpath_irq_sync(struct qed_hwfn *p_hwfn)
{
struct qed_dev *cdev = p_hwfn->cdev;
u8 id = p_hwfn->my_id;
u32 int_mode;
int_mode = cdev->int_params.out.int_mode;
if (int_mode == QED_INT_MODE_MSIX)
synchronize_irq(cdev->int_params.msix_table[id].vector);
else
synchronize_irq(cdev->pdev->irq);
}
static void qed_slowpath_irq_free(struct qed_dev *cdev) static void qed_slowpath_irq_free(struct qed_dev *cdev)
{ {
int i; int i;
...@@ -631,19 +644,6 @@ static int qed_nic_stop(struct qed_dev *cdev) ...@@ -631,19 +644,6 @@ static int qed_nic_stop(struct qed_dev *cdev)
return rc; return rc;
} }
static int qed_nic_reset(struct qed_dev *cdev)
{
int rc;
rc = qed_hw_reset(cdev);
if (rc)
return rc;
qed_resc_free(cdev);
return 0;
}
static int qed_nic_setup(struct qed_dev *cdev) static int qed_nic_setup(struct qed_dev *cdev)
{ {
int rc, i; int rc, i;
...@@ -1043,7 +1043,8 @@ static int qed_slowpath_stop(struct qed_dev *cdev) ...@@ -1043,7 +1043,8 @@ static int qed_slowpath_stop(struct qed_dev *cdev)
} }
qed_disable_msix(cdev); qed_disable_msix(cdev);
qed_nic_reset(cdev);
qed_resc_free(cdev);
qed_iov_wq_stop(cdev, true); qed_iov_wq_stop(cdev, true);
......
...@@ -550,32 +550,12 @@ int qed_mcp_cmd(struct qed_hwfn *p_hwfn, ...@@ -550,32 +550,12 @@ int qed_mcp_cmd(struct qed_hwfn *p_hwfn,
u32 *o_mcp_param) u32 *o_mcp_param)
{ {
struct qed_mcp_mb_params mb_params; struct qed_mcp_mb_params mb_params;
struct mcp_mac wol_mac;
int rc; int rc;
memset(&mb_params, 0, sizeof(mb_params)); memset(&mb_params, 0, sizeof(mb_params));
mb_params.cmd = cmd; mb_params.cmd = cmd;
mb_params.param = param; mb_params.param = param;
/* In case of UNLOAD_DONE, set the primary MAC */
if ((cmd == DRV_MSG_CODE_UNLOAD_DONE) &&
(p_hwfn->cdev->wol_config == QED_OV_WOL_ENABLED)) {
u8 *p_mac = p_hwfn->cdev->wol_mac;
memset(&wol_mac, 0, sizeof(wol_mac));
wol_mac.mac_upper = p_mac[0] << 8 | p_mac[1];
wol_mac.mac_lower = p_mac[2] << 24 | p_mac[3] << 16 |
p_mac[4] << 8 | p_mac[5];
DP_VERBOSE(p_hwfn,
(QED_MSG_SP | NETIF_MSG_IFDOWN),
"Setting WoL MAC: %pM --> [%08x,%08x]\n",
p_mac, wol_mac.mac_upper, wol_mac.mac_lower);
mb_params.p_data_src = &wol_mac;
mb_params.data_src_size = sizeof(wol_mac);
}
rc = qed_mcp_cmd_and_union(p_hwfn, p_ptt, &mb_params); rc = qed_mcp_cmd_and_union(p_hwfn, p_ptt, &mb_params);
if (rc) if (rc)
return rc; return rc;
...@@ -663,6 +643,59 @@ int qed_mcp_load_req(struct qed_hwfn *p_hwfn, ...@@ -663,6 +643,59 @@ int qed_mcp_load_req(struct qed_hwfn *p_hwfn,
return 0; return 0;
} }
int qed_mcp_unload_req(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
{
u32 wol_param, mcp_resp, mcp_param;
switch (p_hwfn->cdev->wol_config) {
case QED_OV_WOL_DISABLED:
wol_param = DRV_MB_PARAM_UNLOAD_WOL_DISABLED;
break;
case QED_OV_WOL_ENABLED:
wol_param = DRV_MB_PARAM_UNLOAD_WOL_ENABLED;
break;
default:
DP_NOTICE(p_hwfn,
"Unknown WoL configuration %02x\n",
p_hwfn->cdev->wol_config);
/* Fallthrough */
case QED_OV_WOL_DEFAULT:
wol_param = DRV_MB_PARAM_UNLOAD_WOL_MCP;
}
return qed_mcp_cmd(p_hwfn, p_ptt, DRV_MSG_CODE_UNLOAD_REQ, wol_param,
&mcp_resp, &mcp_param);
}
int qed_mcp_unload_done(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
{
struct qed_mcp_mb_params mb_params;
struct mcp_mac wol_mac;
memset(&mb_params, 0, sizeof(mb_params));
mb_params.cmd = DRV_MSG_CODE_UNLOAD_DONE;
/* Set the primary MAC if WoL is enabled */
if (p_hwfn->cdev->wol_config == QED_OV_WOL_ENABLED) {
u8 *p_mac = p_hwfn->cdev->wol_mac;
memset(&wol_mac, 0, sizeof(wol_mac));
wol_mac.mac_upper = p_mac[0] << 8 | p_mac[1];
wol_mac.mac_lower = p_mac[2] << 24 | p_mac[3] << 16 |
p_mac[4] << 8 | p_mac[5];
DP_VERBOSE(p_hwfn,
(QED_MSG_SP | NETIF_MSG_IFDOWN),
"Setting WoL MAC: %pM --> [%08x,%08x]\n",
p_mac, wol_mac.mac_upper, wol_mac.mac_lower);
mb_params.p_data_src = &wol_mac;
mb_params.data_src_size = sizeof(wol_mac);
}
return qed_mcp_cmd_and_union(p_hwfn, p_ptt, &mb_params);
}
static void qed_mcp_handle_vf_flr(struct qed_hwfn *p_hwfn, static void qed_mcp_handle_vf_flr(struct qed_hwfn *p_hwfn,
struct qed_ptt *p_ptt) struct qed_ptt *p_ptt)
{ {
......
...@@ -592,6 +592,26 @@ int qed_mcp_load_req(struct qed_hwfn *p_hwfn, ...@@ -592,6 +592,26 @@ int qed_mcp_load_req(struct qed_hwfn *p_hwfn,
struct qed_ptt *p_ptt, struct qed_ptt *p_ptt,
u32 *p_load_code); u32 *p_load_code);
/**
* @brief Sends a UNLOAD_REQ message to the MFW
*
* @param p_hwfn
* @param p_ptt
*
* @return int - 0 - Operation was successful.
*/
int qed_mcp_unload_req(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt);
/**
* @brief Sends a UNLOAD_DONE message to the MFW
*
* @param p_hwfn
* @param p_ptt
*
* @return int - 0 - Operation was successful.
*/
int qed_mcp_unload_done(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt);
/** /**
* @brief Read the MFW mailbox into Current buffer. * @brief Read the MFW mailbox into Current buffer.
* *
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册